Simone Di Domenico
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Simone Di Domenico has a total of 20 co-authors. Here are the top co-authors by number of shared publications:
- Mauro De Sanctis
Department of Electronics Engineering, University of Rome Tor Vergata, Rome, Italy
9 shared publications Ernestina Cianca
Department of Electronics Engineering, University of Rome Tor Vergata, Rome, Italy
6 shared publications- Ernestina Cianca
Department of Electronic Engineering, University of Rome Tor Vergata, Rome, Italy
4 shared publications Giuseppe Bianchi
4 shared publications- Giovanni Pecoraro
Department of Electronics Engineering, University of Rome Tor Vergata, Rome, Italy
2 shared publications Daniele Provenziani
University of Roma Tor Vergata, Roma, Italy
1 shared publication
Latest Publications
- Open Access
- 10 September 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Aerospace and Electronic Systems
- Vol. 57 (6) , 4465-4471
Low-Complexity Blind Equalization in Q/V Band Satellite Links: An Experimental Assessment
In the near future, high-throughput satellite systems are expected to reach the milestone of terabit/s capacity through the exploitation of “beyond Ka-band” frequencies in the feeder link, in particular, Q and V bands (and possibly beyond). The use of such high-frequency bands, combined with the need to build radio-frequency (RF) chains with an affordable cost, leads analog RF circuits to work far from their ideal operating point, thus producing relevant linear and nonlinear signal distortions. In this article, an experimental assessment has been performed to evaluate the effectiveness of a low-complexity blind equalizer, namely the constant-modulus algorithm (CMA), to reduce the performance degradation due to such signal distortions. Benefits introduced by the CMA equalizer have been evaluated in a real Q/V-band satellite link using the DVB-S2 standard, in the framework of the experimental campaign of the Italian Space Agency, carried out through the Alphasat TDP#5 “Aldo Paraboni” payload.
- 10 September 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Aerospace and Electronic Systems
- Vol. 57 (6) , 4465-4471
Open AccessLow-Complexity Blind Equalization in Q/V Band Satellite Links: An Experimental Assessment
In the near future, high-throughput satellite systems are expected to reach the milestone of terabit/s capacity through the exploitation of “beyond Ka-band” frequencies in the feeder link, in particular, Q and V bands (and possibly beyond). The use of such high-frequency bands, combined with the need to build radio-frequency (RF) chains with an affordable cost, leads analog RF circuits to work far from their ideal operating point, thus producing relevant linear and nonlinear signal distortions. In this article, an experimental assessment has been performed to evaluate the effectiveness of a low-complexity blind equalizer, namely the constant-modulus algorithm (CMA), to reduce the performance degradation due to such signal distortions. Benefits introduced by the CMA equalizer have been evaluated in a real Q/V-band satellite link using the DVB-S2 standard, in the framework of the experimental campaign of the Italian Space Agency, carried out through the Alphasat TDP#5 “Aldo Paraboni” payload.
- 17 May 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Communications Magazine
- Vol. 56 (5) , 116-123
Exploring Training Options for RF Sensing Using CSI
This work analyzes human behavior recognition approaches using WiFi channel state information from the perhaps less usual point of view of training and calibration needs. With the help of selected literature examples, as well as with more detailed experimental insights on our own Doppler spectrum-based approach for physical motion/presence/cardinality detection, we first classify the diverse forms of training so far employed into three main categories (trained, trained-once, and training-free). We further discuss under which conditions it is possible to move toward lighter forms of calibration or even succeed in devising fully untrained model-based solutions. Our take home messages are mainly two. First, reduced training might not necessarily kill performance (although, of course, trade-offs will emerge). Second, reduced training must come along with a careful customization of the technical detection approach to the specificities of the behavior recognition application targeted, as it seems very hard to find a one-size-fits-all solution without relying on extensive training.
- 17 May 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Communications Magazine
- Vol. 56 (5) , 116-123
Exploring Training Options for RF Sensing Using CSI
This work analyzes human behavior recognition approaches using WiFi channel state information from the perhaps less usual point of view of training and calibration needs. With the help of selected literature examples, as well as with more detailed experimental insights on our own Doppler spectrum-based approach for physical motion/presence/cardinality detection, we first classify the diverse forms of training so far employed into three main categories (trained, trained-once, and training-free). We further discuss under which conditions it is possible to move toward lighter forms of calibration or even succeed in devising fully untrained model-based solutions. Our take home messages are mainly two. First, reduced training might not necessarily kill performance (although, of course, trade-offs will emerge). Second, reduced training must come along with a careful customization of the technical detection approach to the specificities of the behavior recognition application targeted, as it seems very hard to find a one-size-fits-all solution without relying on extensive training.
- 1 October 2017
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-8
LTE signal fingerprinting localization based on CSI
This paper investigates the possibility to use Channel State Information (CSI) extracted from Long Term Evolution (LTE) signals for signal fingerprinting localization. Being the first work in this direction, several types of signal fingerprinting-based approaches have been compared (e.g., CSI-based vs RSSI-based, statistic vs deterministic matching rule). In particular, the paper proposes a novel CSI-based signal fingerprinting that uses as fingerprint not directly the vector of channel gains per subcarrier, but rather some features extracted from these vectors. This method would greatly reduce the memory requirement of the database as well as the computational complexity of the matching phase. Experimental results, shown for both indoor and outdoor environments, confirm the effectiveness of the proposed method and also provide interesting insights on the use of LTE signal fingerprinting based on CSI.
- 1 October 2017
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-8
LTE signal fingerprinting localization based on CSI
This paper investigates the possibility to use Channel State Information (CSI) extracted from Long Term Evolution (LTE) signals for signal fingerprinting localization. Being the first work in this direction, several types of signal fingerprinting-based approaches have been compared (e.g., CSI-based vs RSSI-based, statistic vs deterministic matching rule). In particular, the paper proposes a novel CSI-based signal fingerprinting that uses as fingerprint not directly the vector of channel gains per subcarrier, but rather some features extracted from these vectors. This method would greatly reduce the memory requirement of the database as well as the computational complexity of the matching phase. Experimental results, shown for both indoor and outdoor environments, confirm the effectiveness of the proposed method and also provide interesting insights on the use of LTE signal fingerprinting based on CSI.
- 1 July 2017
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-9
Unveiling Access Point Signal Instability in WiFi-Based Passive Sensing
In the last few years, there has been a growing interest on the usage of passive WiFi signals for detecting and classifying human behavior activities. In most generality, the idea underlying most state of the art approaches is to monitor changes in the Channel State Information (CSI) or equivalent spectral metrics, caused by the different multi- path conditions (and their temporal variations) induced by human activity. The (implicit) underlying intuitive assumption is that, in a static environment, i.e. with no moving humans, the multi-path conditions do not vary, and hence the CSI gathered at the passive receiver side should remain substantially stable in time. Goal of this paper is to document, with an extensive set of experimental measurements, a perhaps surprising result: with modern multi-antenna 802.11n/ac access points, such an intuitive assumption does not seem to hold anymore. Rather, the measured CSI time pattern, which differs for different access point brands, appears to be affected by access points' implementation artifacts. Indeed, our measurements unveil frequent fluctuations of the CSI pattern among multiple "modes". Albeit still preliminary and, at least in part, still requiring a more thorough understanding (that only the reverse engineering of the access points' implementation may ultimately provide), our measurements unveil a phenomenon which may play havoc with several CSI-based human behavior detection approaches proposed in past works, and especially with those based on CSI measured on data frames, opposed to those based on relatively more stable (but still to be reconsidered in sight of our results) Beacon frames.
- 1 July 2017
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-9
Unveiling Access Point Signal Instability in WiFi-Based Passive Sensing
In the last few years, there has been a growing interest on the usage of passive WiFi signals for detecting and classifying human behavior activities. In most generality, the idea underlying most state of the art approaches is to monitor changes in the Channel State Information (CSI) or equivalent spectral metrics, caused by the different multi- path conditions (and their temporal variations) induced by human activity. The (implicit) underlying intuitive assumption is that, in a static environment, i.e. with no moving humans, the multi-path conditions do not vary, and hence the CSI gathered at the passive receiver side should remain substantially stable in time. Goal of this paper is to document, with an extensive set of experimental measurements, a perhaps surprising result: with modern multi-antenna 802.11n/ac access points, such an intuitive assumption does not seem to hold anymore. Rather, the measured CSI time pattern, which differs for different access point brands, appears to be affected by access points' implementation artifacts. Indeed, our measurements unveil frequent fluctuations of the CSI pattern among multiple "modes". Albeit still preliminary and, at least in part, still requiring a more thorough understanding (that only the reverse engineering of the access points' implementation may ultimately provide), our measurements unveil a phenomenon which may play havoc with several CSI-based human behavior detection approaches proposed in past works, and especially with those based on CSI measured on data frames, opposed to those based on relatively more stable (but still to be reconsidered in sight of our results) Beacon frames.
- 1 May 2017
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-6
LTE-based passive device-free crowd density estimation
In the last few years, there has been a growing interest in developing sensing systems using RF signals of opportunity, especially exploiting radar-based techniques. Long Term Evolution (LTE) signals are excellent candidates as signals of opportunity thanks to their wide availability and penetration in indoor environments. This is the first work investigating the possibility to use LTE signals for crowd density estimation. The proposed approach is not radar-like but it exploits the correlation between the variations of the received LTE signals (in particular, of the Reference Signal Received Power) and the number of people. An experimental evaluation of the performance is carried out in a indoor environment testing three different positions of the LTE receiver. Achieved results in terms of classification accuracy are very promising.
- 1 May 2017
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-6
LTE-based passive device-free crowd density estimation
In the last few years, there has been a growing interest in developing sensing systems using RF signals of opportunity, especially exploiting radar-based techniques. Long Term Evolution (LTE) signals are excellent candidates as signals of opportunity thanks to their wide availability and penetration in indoor environments. This is the first work investigating the possibility to use LTE signals for crowd density estimation. The proposed approach is not radar-like but it exploits the correlation between the variations of the received LTE signals (in particular, of the Reference Signal Received Power) and the number of people. An experimental evaluation of the performance is carried out in a indoor environment testing three different positions of the LTE receiver. Achieved results in terms of classification accuracy are very promising.
- 5 December 2016
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-8
Trained-once device-free crowd counting and occupancy estimation using WiFi: A Doppler spectrum based approach
This paper presents a WiFi-based device-free crowd counting and occupancy estimation system that can be used in rooms/environments different from the ones in which the training process has been performed. Therefore, crowd counting is achieved without requiring another training phase in each new environment. The proposed approach analyzes the shape of the Doppler spectrum of the received signal which is correlated to the number of people moving in the monitored environment. Unlike a radar-like approach, the use of a reference signal is not required. Experimental results are presented for two different rooms/environments without any constraint on the movements of the volunteers.
- 5 December 2016
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-8
Trained-once device-free crowd counting and occupancy estimation using WiFi: A Doppler spectrum based approach
This paper presents a WiFi-based device-free crowd counting and occupancy estimation system that can be used in rooms/environments different from the ones in which the training process has been performed. Therefore, crowd counting is achieved without requiring another training phase in each new environment. The proposed approach analyzes the shape of the Doppler spectrum of the received signal which is correlated to the number of people moving in the monitored environment. Unlike a radar-like approach, the use of a reference signal is not required. Experimental results are presented for two different rooms/environments without any constraint on the movements of the volunteers.
- 16 September 2016
- Published by Springer Nature in Medical & Biological Engineering & Computing
- Vol. 55 (6) , 909-921
PCA-based artifact removal algorithm for stroke detection using UWB radar imaging
Stroke patients should be dispatched at the highest level of care available in the shortest time. In this context, a transportable system in specialized ambulances, able to evaluate the presence of an acute brain lesion in a short time interval (i.e., few minutes), could shorten delay of treatment. UWB radar imaging is an emerging diagnostic branch that has great potential for the implementation of a transportable and low-cost device. Transportability, low cost and short response time pose challenges to the signal processing algorithms of the backscattered signals as they should guarantee good performance with a reasonably low number of antennas and low computational complexity, tightly related to the response time of the device. The paper shows that a PCA-based preprocessing algorithm can: (1) achieve good performance already with a computationally simple beamforming algorithm; (2) outperform state-of-the-art preprocessing algorithms; (3) enable a further improvement in the performance (and/or decrease in the number of antennas) by using a multistatic approach with just a modest increase in computational complexity. This is an important result toward the implementation of such a diagnostic device that could play an important role in emergency scenario.
- 16 September 2016
- Published by Springer Nature in Medical & Biological Engineering & Computing
- Vol. 55 (6) , 909-921
PCA-based artifact removal algorithm for stroke detection using UWB radar imaging
Stroke patients should be dispatched at the highest level of care available in the shortest time. In this context, a transportable system in specialized ambulances, able to evaluate the presence of an acute brain lesion in a short time interval (i.e., few minutes), could shorten delay of treatment. UWB radar imaging is an emerging diagnostic branch that has great potential for the implementation of a transportable and low-cost device. Transportability, low cost and short response time pose challenges to the signal processing algorithms of the backscattered signals as they should guarantee good performance with a reasonably low number of antennas and low computational complexity, tightly related to the response time of the device. The paper shows that a PCA-based preprocessing algorithm can: (1) achieve good performance already with a computationally simple beamforming algorithm; (2) outperform state-of-the-art preprocessing algorithms; (3) enable a further improvement in the performance (and/or decrease in the number of antennas) by using a multistatic approach with just a modest increase in computational complexity. This is an important result toward the implementation of such a diagnostic device that could play an important role in emergency scenario.
- Open Access
- 26 June 2016
- Published by Association for Computing Machinery (ACM)
- p. 37-42
A Trained-once Crowd Counting Method Using Differential WiFi Channel State Information
This paper focuses on the problem of providing a rough count of the number of people in a room using passive WiFi Channel State Information (CSI) measurements taken by a single commodity receiver. The feature which mainly distinguishes our work from others is the attempt to emerge with an approach which does not require any dedicated training inside the specific environment where the system is deployed. Our proposal stems from the intuitive observation that features which account for em variations of CSI are expected to be less sensitive to the surrounding environment as opposed to features which account for absolute CSI measurements. We turn such intuition into a concrete proposal, by suitably identifying a set of differential CSI feature candidates, and by selecting the (two) most effective ones via minimization of the summation of the Davies-Bouldin indexes. We preliminary assess the effectiveness of the proposed approach by training once for all the system in a room, and testing the system in two em different rooms having different size and furniture, and involving people freely moving in the rooms with no a-priori movement constraints.
- 26 June 2016
- Published by Association for Computing Machinery (ACM)
- p. 37-42
Open AccessA Trained-once Crowd Counting Method Using Differential WiFi Channel State Information
This paper focuses on the problem of providing a rough count of the number of people in a room using passive WiFi Channel State Information (CSI) measurements taken by a single commodity receiver. The feature which mainly distinguishes our work from others is the attempt to emerge with an approach which does not require any dedicated training inside the specific environment where the system is deployed. Our proposal stems from the intuitive observation that features which account for em variations of CSI are expected to be less sensitive to the surrounding environment as opposed to features which account for absolute CSI measurements. We turn such intuition into a concrete proposal, by suitably identifying a set of differential CSI feature candidates, and by selecting the (two) most effective ones via minimization of the summation of the Davies-Bouldin indexes. We preliminary assess the effectiveness of the proposed approach by training once for all the system in a room, and testing the system in two em different rooms having different size and furniture, and involving people freely moving in the rooms with no a-priori movement constraints.
- 5 May 2016
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Internet of Things Journal
- Vol. 4 (2) , 363-373
Radios as Sensors
Radio receivers, besides acting as wireless network nodes participating to the Internet of Things (IoT) communication task, may act as opportunistic sensors participating to the IoT sensing task. In particular, a radio receiver is intrinsically an electronic sensor which may be used for device-free human activity recognition. In this paper, we analyze recent results on how the identification of the human body presence and movement can be carried out analyzing the RF signals transmitted by sources of opportunity. The impact of channel bandwidth, transmission mode, carrier frequency, and signal descriptors on the recognition performance is discussed. Moreover, we present a novel crowd counting system and assess the performance considering two different types of signal descriptors. Results prove the effectiveness of the presented crowd counting system and allow to get more insights into the relation among the specific sensed environment, chosen signal descriptors, and classification accuracy.
- 5 May 2016
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Internet of Things Journal
- Vol. 4 (2) , 363-373
Radios as Sensors
Radio receivers, besides acting as wireless network nodes participating to the Internet of Things (IoT) communication task, may act as opportunistic sensors participating to the IoT sensing task. In particular, a radio receiver is intrinsically an electronic sensor which may be used for device-free human activity recognition. In this paper, we analyze recent results on how the identification of the human body presence and movement can be carried out analyzing the RF signals transmitted by sources of opportunity. The impact of channel bandwidth, transmission mode, carrier frequency, and signal descriptors on the recognition performance is discussed. Moreover, we present a novel crowd counting system and assess the performance considering two different types of signal descriptors. Results prove the effectiveness of the presented crowd counting system and allow to get more insights into the relation among the specific sensed environment, chosen signal descriptors, and classification accuracy.
- 1 August 2015
- Published by Institute of Electrical and Electronics Engineers (IEEE) in 2018 40th Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC)
- Vol. 2015 (1094687X) , 1930-1933
Artifact removal algorithms for stroke detection using a multistatic MIST beamforming algorithm
Microwave imaging (MWI) has been recently proved as a promising imaging modality for low-complexity, low-cost and fast brain imaging tools, which could play a fundamental role to efficiently manage emergencies related to stroke and hemorrhages. This paper focuses on the UWB radar imaging approach and in particular on the processing algorithms of the backscattered signals. Assuming the use of the multistatic version of the MIST (Microwave Imaging Space-Time) beamforming algorithm, developed by Hagness et al. for the early detection of breast cancer, the paper proposes and compares two artifact removal algorithms. Artifacts removal is an essential step of any UWB radar imaging system and currently considered artifact removal algorithms have been shown not to be effective in the specific scenario of brain imaging. First of all, the paper proposes modifications of a known artifact removal algorithm. These modifications are shown to be effective to achieve good localization accuracy and lower false positives. However, the main contribution is the proposal of an artifact removal algorithm based on statistical methods, which allows to achieve even better performance but with much lower computational complexity.
- 1 August 2015
- Published by Institute of Electrical and Electronics Engineers (IEEE) in 2018 40th Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC)
- Vol. 2015 (1094687X) , 1930-1933
Artifact removal algorithms for stroke detection using a multistatic MIST beamforming algorithm
Microwave imaging (MWI) has been recently proved as a promising imaging modality for low-complexity, low-cost and fast brain imaging tools, which could play a fundamental role to efficiently manage emergencies related to stroke and hemorrhages. This paper focuses on the UWB radar imaging approach and in particular on the processing algorithms of the backscattered signals. Assuming the use of the multistatic version of the MIST (Microwave Imaging Space-Time) beamforming algorithm, developed by Hagness et al. for the early detection of breast cancer, the paper proposes and compares two artifact removal algorithms. Artifacts removal is an essential step of any UWB radar imaging system and currently considered artifact removal algorithms have been shown not to be effective in the specific scenario of brain imaging. First of all, the paper proposes modifications of a known artifact removal algorithm. These modifications are shown to be effective to achieve good localization accuracy and lower false positives. However, the main contribution is the proposal of an artifact removal algorithm based on statistical methods, which allows to achieve even better performance but with much lower computational complexity.