Ahmed Fathy Abouzeid
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Research Interests
Ahmed Fathy Abouzeid has a total of 34 co-authors. Here are the top co-authors by number of shared publications:
- Fernando Briz
University of Oviedo
6 shared publications - Juan Manuel Guerrero
University of Oviedo
6 shared publications Iker Muniategui
Department of Traction systems, Ingeteam Power Technology, Zamudio, Spain
4 shared publicationsAitor Endemano
Ingeteam Power Technology,Department of Traction Systems,Zamudio,Spain
3 shared publicationsFernando Briz
University of Oviedo,Department of Electrical, Electronic and Computer Engineering,Gijn,Spain
3 shared publicationsIker Muniategui-Aspiazu
Department of Traction systems, Ingeteam Power Technology, Zamudio, Spain
3 shared publications
Latest Publications
- Open Access
- 27 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Open Journal of Industry Applications
- Vol. 7, 163-173
Data-Driven ANN-Based Torque Estimation of High Power Induction Motor Drives for Railways
Modern railway traction drives require precise traction torque control for regulatory compliance and reliable operation. Inaccurate core loss modeling, flux observer errors, inverter non-linearities and measurement uncertainties are common sources of torque estimation errors. Torque estimation error can be reduced by improving motor models and parameter estimation, inverter modeling, variable measurements, etc. However, this is not trivial, and some level of uncertainty will always remain. In this paper, an Artificial Neural Networks (ANN)-based technique for torque estimation error compensation in railway traction drives is proposed. Data used for ANN training are collected during the commissioning process of the traction drive. The proposed method will be implemented in the 400 kW traction drive of a high-speed train. Torque estimation at high speeds was found to be the most critical. Using the proposed method, the estimation error was reduced from 12% to 2% in this case.
- 27 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Open Journal of Industry Applications
- Vol. 7, 163-173
Open AccessData-Driven ANN-Based Torque Estimation of High Power Induction Motor Drives for Railways
Modern railway traction drives require precise traction torque control for regulatory compliance and reliable operation. Inaccurate core loss modeling, flux observer errors, inverter non-linearities and measurement uncertainties are common sources of torque estimation errors. Torque estimation error can be reduced by improving motor models and parameter estimation, inverter modeling, variable measurements, etc. However, this is not trivial, and some level of uncertainty will always remain. In this paper, an Artificial Neural Networks (ANN)-based technique for torque estimation error compensation in railway traction drives is proposed. Data used for ANN training are collected during the commissioning process of the traction drive. The proposed method will be implemented in the 400 kW traction drive of a high-speed train. Torque estimation at high speeds was found to be the most critical. Using the proposed method, the estimation error was reduced from 12% to 2% in this case.
- Open Access
- 22 August 2025
- Published by Springer Nature in Scientific Reports
- Vol. 15 (1) , 1-26
A novel wide input range transformerless PV microinverter with natural power decoupling
In this paper, a novel wide range microinverter circuit that can interface with a single-phase grid and operates without a transformer is presented. The proposed topology uses six switches: two of those switches function at line frequency every half cycle while the other switches function at high switching frequency. In the proposed topology, the circuit functions in discontinuous conduction mode (DCM) across all possible operating conditions, ensuring high gain and minimal switching losses. A common connection between the PV panel and the grid exists, ensuring no common mode current. The proposed topology naturally decouples the power between the DC and AC sides without using an active power decoupling circuit. Passive power decoupling techniques implemented using a large electrolytic capacitor which is very well known to have low reliability is also not needed. Thus, the microinverter’s reliability is increased by using thin film capacitors. The analysis and verification of the proposed system are presented in this paper. Additionally, a standalone version of the presented circuit is verified experimentally through a fabricated prototype. In addition to the benefits of the presented circuit, both simulation and experimental data demonstrate that the circuit can operate without requiring a duty cycle constraint, offering significantly greater flexibility and a wider operating range.
- 22 August 2025
- Published by Springer Nature in Scientific Reports
- Vol. 15 (1) , 1-26
Open AccessA novel wide input range transformerless PV microinverter with natural power decoupling
In this paper, a novel wide range microinverter circuit that can interface with a single-phase grid and operates without a transformer is presented. The proposed topology uses six switches: two of those switches function at line frequency every half cycle while the other switches function at high switching frequency. In the proposed topology, the circuit functions in discontinuous conduction mode (DCM) across all possible operating conditions, ensuring high gain and minimal switching losses. A common connection between the PV panel and the grid exists, ensuring no common mode current. The proposed topology naturally decouples the power between the DC and AC sides without using an active power decoupling circuit. Passive power decoupling techniques implemented using a large electrolytic capacitor which is very well known to have low reliability is also not needed. Thus, the microinverter’s reliability is increased by using thin film capacitors. The analysis and verification of the proposed system are presented in this paper. Additionally, a standalone version of the presented circuit is verified experimentally through a fabricated prototype. In addition to the benefits of the presented circuit, both simulation and experimental data demonstrate that the circuit can operate without requiring a duty cycle constraint, offering significantly greater flexibility and a wider operating range.
- Open Access
- 7 August 2024
- Published by Springer Nature in Scientific Reports
- Vol. 14 (1) , 1-22
Experimental validation of a low-cost maximum power point tracking technique based on artificial neural network for photovoltaic systems
Maximum power point tracking (MPPT) is a technique involved in photovoltaic (PV) systems for optimizing the output power of solar panels. Traditional solutions like perturb and observe (P&O) and Incremental Conductance (IC) are commonly utilized to follow the MPP under various environmental circumstances. However, these algorithms suffer from slow tracking speed and low dynamics under fast-changing environment conditions. To cope with these demerits, a data-driven artificial neural network (ANN) algorithm for MPPT is proposed in this paper. By leveraging the learning capabilities of the ANN, the PV operating point can be adapted to dynamic changes in solar irradiation and temperature. Consequently, it offers promising solutions for MPPT in fast-changing environments as well as overcoming the limitations of traditional MPPT techniques. In this paper, simulations verification and experimental validation of a proposed data-driven ANN-MPPT technique are presented. Additionally, the proposed technique is analyzed and compared to traditional MPPT methods. The numerical and experimental findings indicate that, of the examined MPPT methods, the proposed ANN-MPPT approach achieves the highest MPPT efficiency at 98.16% and the shortest tracking time of 1.3 s.
- 7 August 2024
- Published by Springer Nature in Scientific Reports
- Vol. 14 (1) , 1-22
Open AccessExperimental validation of a low-cost maximum power point tracking technique based on artificial neural network for photovoltaic systems
Maximum power point tracking (MPPT) is a technique involved in photovoltaic (PV) systems for optimizing the output power of solar panels. Traditional solutions like perturb and observe (P&O) and Incremental Conductance (IC) are commonly utilized to follow the MPP under various environmental circumstances. However, these algorithms suffer from slow tracking speed and low dynamics under fast-changing environment conditions. To cope with these demerits, a data-driven artificial neural network (ANN) algorithm for MPPT is proposed in this paper. By leveraging the learning capabilities of the ANN, the PV operating point can be adapted to dynamic changes in solar irradiation and temperature. Consequently, it offers promising solutions for MPPT in fast-changing environments as well as overcoming the limitations of traditional MPPT techniques. In this paper, simulations verification and experimental validation of a proposed data-driven ANN-MPPT technique are presented. Additionally, the proposed technique is analyzed and compared to traditional MPPT methods. The numerical and experimental findings indicate that, of the examined MPPT methods, the proposed ANN-MPPT approach achieves the highest MPPT efficiency at 98.16% and the shortest tracking time of 1.3 s.
- 6 September 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Transportation Electrification
- Vol. 10 (2) , 3645-3660
Advanced Maximum Adhesion Tracking Strategies in Railway Traction Drives
Modern railway traction systems are often equipped with anti-slip control strategies to comply with performance and safety requirements. A certain amount of slip is needed to increase the torque transferred by the traction motors onto the rail. Commonly, constant slip control is used to limit the slip velocity between the wheel and rail avoiding excessive slippage and vehicle derailment. This is at the price of not fully utilizing the train’s traction and braking capabilities. Finding the slip at which maximum traction force occurs is challenging due to the non-linear relationship between slip and wheel-rail adhesion coefficient, as well as to its dependence on rail and wheel conditions. Perturb and observe (P&O) and steepest gradient (SG) methods have been reported for the Maximum Adhesion Tracking (MAT) search. However, both methods exhibit weaknesses. Two new MAT strategies are proposed in this paper which overcome the limitations of existing methods, using Fuzzy Logic Controller (FLC) and Particle Swarm Optimization (PSO) respectively. Existing and proposed methods are first simulated and further validated experimentally using a scaled roller rig under identical conditions. The results show that the proposed methods improve the traction capability with lower searching time and oscillations compared to existing solutions. Tuning complexity and computational requirements will also be shown to be favorable to the proposed methods.
- 6 September 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Transportation Electrification
- Vol. 10 (2) , 3645-3660
Advanced Maximum Adhesion Tracking Strategies in Railway Traction Drives
Modern railway traction systems are often equipped with anti-slip control strategies to comply with performance and safety requirements. A certain amount of slip is needed to increase the torque transferred by the traction motors onto the rail. Commonly, constant slip control is used to limit the slip velocity between the wheel and rail avoiding excessive slippage and vehicle derailment. This is at the price of not fully utilizing the train’s traction and braking capabilities. Finding the slip at which maximum traction force occurs is challenging due to the non-linear relationship between slip and wheel-rail adhesion coefficient, as well as to its dependence on rail and wheel conditions. Perturb and observe (P&O) and steepest gradient (SG) methods have been reported for the Maximum Adhesion Tracking (MAT) search. However, both methods exhibit weaknesses. Two new MAT strategies are proposed in this paper which overcome the limitations of existing methods, using Fuzzy Logic Controller (FLC) and Particle Swarm Optimization (PSO) respectively. Existing and proposed methods are first simulated and further validated experimentally using a scaled roller rig under identical conditions. The results show that the proposed methods improve the traction capability with lower searching time and oscillations compared to existing solutions. Tuning complexity and computational requirements will also be shown to be favorable to the proposed methods.
- 5 December 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Vehicular Technology
- Vol. 72 (4) , 4320-4331
Design of a Scaled Roller-Rig Test Bench for Anti-Slip Control Development for Railway Traction
Anti-slip control is a prominent part of modern railway traction control systems due both to performance and safety concerns. This paper explains the development of a scaled roller-rig test bench which emulates the rail and the wheel of a train. The final purpose of the developed roller-rig test bench is twofold: to study the theory/behaviour of existing anti-slip strategies and to test new designs, before their implementation in the real system. Estimation of adhesion coefficient using a disturbance observer method is explained and tested under various conditions. Anti-slip control is implemented in wheel drive using a direct method by adding a slip speed controller. The tests are conducted using both fixed roller speed and variable roller speed, i.e. dynamic roller. In this second case, train inertia emulation will be key. Two methods are proposed to emulate train inertia, being this the main contribution of this paper. Both methods are verified in simulation first, and further confirmed experimentally in the test bench.
- 5 December 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Vehicular Technology
- Vol. 72 (4) , 4320-4331
Design of a Scaled Roller-Rig Test Bench for Anti-Slip Control Development for Railway Traction
Anti-slip control is a prominent part of modern railway traction control systems due both to performance and safety concerns. This paper explains the development of a scaled roller-rig test bench which emulates the rail and the wheel of a train. The final purpose of the developed roller-rig test bench is twofold: to study the theory/behaviour of existing anti-slip strategies and to test new designs, before their implementation in the real system. Estimation of adhesion coefficient using a disturbance observer method is explained and tested under various conditions. Anti-slip control is implemented in wheel drive using a direct method by adding a slip speed controller. The tests are conducted using both fixed roller speed and variable roller speed, i.e. dynamic roller. In this second case, train inertia emulation will be key. Two methods are proposed to emulate train inertia, being this the main contribution of this paper. Both methods are verified in simulation first, and further confirmed experimentally in the test bench.
- Open Access
Co-Simulation-Based Verification of Torsional Vibration Protection of Electric-Driven Railway Vehicle Wheelsets
Torsional vibration is an oscillation phenomenon occurring at driven railway vehicle wheelsets. As the resulting dynamic stresses can be significantly larger than the maximum static motor torque, axle and press fit are at risk of failure. To prevent dangerous vibration events and with these, press fit and axle from failure, traction drive manufactures nowadays used to implement vibration suppression algorithms in drive controls. In this paper, the effectiveness of such suppression algorithms is analyzed. Furthermore, as a pilot survey, we analyze to what extend traction controls influence the excitation of torsional vibration.
Open AccessCo-Simulation-Based Verification of Torsional Vibration Protection of Electric-Driven Railway Vehicle Wheelsets
Torsional vibration is an oscillation phenomenon occurring at driven railway vehicle wheelsets. As the resulting dynamic stresses can be significantly larger than the maximum static motor torque, axle and press fit are at risk of failure. To prevent dangerous vibration events and with these, press fit and axle from failure, traction drive manufactures nowadays used to implement vibration suppression algorithms in drive controls. In this paper, the effectiveness of such suppression algorithms is analyzed. Furthermore, as a pilot survey, we analyze to what extend traction controls influence the excitation of torsional vibration.
- 5 September 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 2249-2255
Remagnetization Strategies for Induction Machines Operating with Reduced Flux Levels
Induction Machines (IMs) drives are the preferred option for high-speed railway traction drives. Electric drives in this application can work for certain periods of time with light load levels. It is possible in this case to decrease the flux level to reduce the stator current and consequently both joule and hysteresis losses. A drawback of this approach is that if a torque increase is demanded, the machine must be firstly remagnetized. Remagnetization time is determined by the rotor time constant and the applied magnetizing current. Due to the relatively large values of the rotor time constant, fast torque changes are not feasible, which eventually penalizes the dynamic response of the drive. This paper presents strategies for the remagnetization of Induction Machines. Though proposed methods are primarily intended for railways traction, they can be easily extended to other uses of IM drives.
- 5 September 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 2249-2255
Remagnetization Strategies for Induction Machines Operating with Reduced Flux Levels
Induction Machines (IMs) drives are the preferred option for high-speed railway traction drives. Electric drives in this application can work for certain periods of time with light load levels. It is possible in this case to decrease the flux level to reduce the stator current and consequently both joule and hysteresis losses. A drawback of this approach is that if a torque increase is demanded, the machine must be firstly remagnetized. Remagnetization time is determined by the rotor time constant and the applied magnetizing current. Due to the relatively large values of the rotor time constant, fast torque changes are not feasible, which eventually penalizes the dynamic response of the drive. This paper presents strategies for the remagnetization of Induction Machines. Though proposed methods are primarily intended for railways traction, they can be easily extended to other uses of IM drives.
- Open Access
- 25 March 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 10, 32855-32869
Torsional Vibration Suppression in Railway Traction Drives
Torsional vibrations phenomena are self-excited vibrations that occur in the wheelset of railway powertrains due to the counter-phase oscillation of both wheels. Long-lasting events of this type may lead to the catastrophic failures. Therefore, torsional vibration suppression and mitigation methods have drawn significant attention from the railway industry in the recent few years. Conventional vibration suppression methods reduce motor torque once the oscillation is detected. However, this can result in trip delays. Design of methods which do not compromise the traction capability is challenging. This paper proposes a novel torsional vibration suppression method using a Proportional-Resonant (PR) controller. The proposed method is insensitive to mechanical drive-train parameter variation neither requires adding new sensors to the wheelset. The method requires previous knowledge of the natural frequency of the wheelset torsional mode but this significantly reduces the implementation complexity suffered by other anti-vibration methods. Furthermore, the method will be shown to provide reduced sensitivity to slip velocities and wheel-rail conditions.
- 25 March 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 10, 32855-32869
Open AccessTorsional Vibration Suppression in Railway Traction Drives
Torsional vibrations phenomena are self-excited vibrations that occur in the wheelset of railway powertrains due to the counter-phase oscillation of both wheels. Long-lasting events of this type may lead to the catastrophic failures. Therefore, torsional vibration suppression and mitigation methods have drawn significant attention from the railway industry in the recent few years. Conventional vibration suppression methods reduce motor torque once the oscillation is detected. However, this can result in trip delays. Design of methods which do not compromise the traction capability is challenging. This paper proposes a novel torsional vibration suppression method using a Proportional-Resonant (PR) controller. The proposed method is insensitive to mechanical drive-train parameter variation neither requires adding new sensors to the wheelset. The method requires previous knowledge of the natural frequency of the wheelset torsional mode but this significantly reduces the implementation complexity suffered by other anti-vibration methods. Furthermore, the method will be shown to provide reduced sensitivity to slip velocities and wheel-rail conditions.
- Open Access
- 1 June 2021
- Published by Institute of Advanced Engineering and Science in International Journal of Electrical and Computer Engineering (IJECE)
- Vol. 11 (3) , 1876-1885
Offshore wind power integration to support weak grid voltage for industrial loads using VSC-HVDC transmission system
This paper investigates the integration of the offshore wind power plant into the grid using voltage source converter high-voltage direct current (VSC-HVDC). The paper proposes both offshore and onshore converter stations control to support voltage variation in grid. Heavy industrial loads result in a weak grid. In this paper, the effect on industrial loads by the grid strength is shown. Then the paper proposes a solution for the grid voltage support for industrial loads connected to weak grids. The results showed that the increase of grid voltage from 0.7 pu to 1 pu at full load condition that provides a continuous operation without any interruption. The system was modelled using MATLAB/Simulink package.
- 1 June 2021
- Published by Institute of Advanced Engineering and Science in International Journal of Electrical and Computer Engineering (IJECE)
- Vol. 11 (3) , 1876-1885
Open AccessOffshore wind power integration to support weak grid voltage for industrial loads using VSC-HVDC transmission system
This paper investigates the integration of the offshore wind power plant into the grid using voltage source converter high-voltage direct current (VSC-HVDC). The paper proposes both offshore and onshore converter stations control to support voltage variation in grid. Heavy industrial loads result in a weak grid. In this paper, the effect on industrial loads by the grid strength is shown. Then the paper proposes a solution for the grid voltage support for industrial loads connected to weak grids. The results showed that the increase of grid voltage from 0.7 pu to 1 pu at full load condition that provides a continuous operation without any interruption. The system was modelled using MATLAB/Simulink package.
- 17 May 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-6
Torque Dynamics Enhancement of Railway Traction Drives Using Scalar Control
Traction systems for railway typically use rotor field-oriented control (RFOC) at low speeds, and scalar control at high speeds to overcome the deterioration of the current regulator performance in the overmodulation region. Well-known limitations of scalar control are the slow dynamic response due to the coupling between torque and flux, as well as the risk of overcurrents. While this is not a problem for normal operation, as fast torque variations are not required, there are specific operating conditions in which fast torque response of scalar control might be required. This would include adhesion control, torsional torque vibration mitigation and torque ripple cancellation for traction systems fed from ac catenaries without a 2F filter in the dc-link. This paper proposes a method to enhance the dynamic response of scalar control. The principles of the proposed method are derived from vector control concepts. While the method could be applied to any electric drive using scalar control, the discussion presented in this paper will be targeted towards high power railway traction drives.
- 17 May 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-6
Torque Dynamics Enhancement of Railway Traction Drives Using Scalar Control
Traction systems for railway typically use rotor field-oriented control (RFOC) at low speeds, and scalar control at high speeds to overcome the deterioration of the current regulator performance in the overmodulation region. Well-known limitations of scalar control are the slow dynamic response due to the coupling between torque and flux, as well as the risk of overcurrents. While this is not a problem for normal operation, as fast torque variations are not required, there are specific operating conditions in which fast torque response of scalar control might be required. This would include adhesion control, torsional torque vibration mitigation and torque ripple cancellation for traction systems fed from ac catenaries without a 2F filter in the dc-link. This paper proposes a method to enhance the dynamic response of scalar control. The principles of the proposed method are derived from vector control concepts. While the method could be applied to any electric drive using scalar control, the discussion presented in this paper will be targeted towards high power railway traction drives.