YXYingtian Xu

Yingtian Xu

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Yingtian Xu has a total of 76 co-authors. Here are the top co-authors by number of shared publications:

  • He Zhang

    Changchun University of Science and Technology

    18 shared publications
  • Xiaohui Ma

    State Key Laboratory of High Power Semiconductor Lasers Changchun University of Science and Technology Changchun 130022 P.R. China

    13 shared publications
  • Liang Jin

    State Key Laboratory of High Power Semiconductor Lasers Changchun University of Science and Technology Changchun 130022 P.R. China

    12 shared publications
  • Yunping Lan

    Changchun University of Science and Technology

    10 shared publications
  • Linlin Shi

    Changchun University of Science and Technology

    9 shared publications
  • Yonggang Zou

    State Key Laboratory of High Power Semiconductor Lasers Changchun University of Science and Technology Changchun 130022 P.R. China

    9 shared publications

Latest Publications

  • Design of Enhanced Multicomponent Gas Sensor Based on Neural Network Cross-Architecture Knowledge Distillation Algorithm

    by Jiawei Wu, Yunping Lan, He Zhang, Yingtian Xu, Chunyu Song, Jilong Tang, Zhipeng Wei, Chao Ge

    To satisfy the demand for high-precision online monitoring of early signature gases, carbon dioxide (CO2) and carbon monoxide (CO), in lithium-ion battery thermal runaway, we propose a multi-component gas sensing system based on a Convolutional Neural Network (CNN) via Cross-Architecture Knowledge Distillation (CAKD). Prior knowledge learned by the teacher model from noisy second harmonic (2ƒ) signals is distilled into a structurally simpler student model, reducing inference latency and computational burden. Under laboratory conditions, the system achieved concentration fitting accuracies of 0.9997 for CO2 and 0.9990 for CO. The mean absolute errors (MAE) for CO2 and CO were 62.615 and 30.110 ppm, respectively, and the mean relative errors (MRE) were 0.500% and 1.759%. Allan deviation analysis further yields detection limits of 3.1171 ppm for CO2 at an averaging time of 146 s and 1.6604 ppm for CO at 122 s. Deployed on a Raspberry Pi, the system achieved an average per-sample inference time of 0.2037 ms, satisfying real-time online monitoring requirements. The model parameter count and computational cost were reduced by 88.47% and 94.10%, respectively, compared with the teacher model. The sensor was further applied to real-time monitoring of CO2 and CO during lithium-ion battery thermal runaway, successfully identifying characteristic gas signals 874 s before thermal runaway onset. These results demonstrate that CAKD significantly reduces model complexity and inference latency while maintaining accurate trace gas detection, demonstrating its application value in embedded safety monitoring systems.

  • Mg doped ZnO nanowires with multilayer films for ultraviolet photodetectors with better performance

    by Li Li, Yingtian Xu, Hongwei Ding, Yingzhi Wei, Jingyao Bian, Feng Wang

    Herein, we report ultraviolet photodetectors (UV PDs) based on Mg-doped zinc oxide (ZnO:Mg) nanowires (NWs) fabricated via chemical vapor deposition, as well as UV PDs constructed with multilayered ZnO:Mg NWs. The as-prepared ZnO:Mg NWs exhibit a preferred c -axis orientation, along with high sensitivity and significantly reduced dark current under 365 nm UV illumination. Notably, the multilayered ZnO:Mg NWs-based UV PDs achieve a substantial performance enhancement: the responsivity increases from 0.19 mA W −1 –2.80 mA W −1 , and the detectivity rises from 2.05 × 10 9 Jones to 3.16 × 10 9 Jones. Furthermore, the response time of the multilayered device is shortened to 0.04 s, which represents a remarkable improvement compared to the 1.91 s response time of the single-layer ZnO:Mg NWs-based PD. Collectively, these results demonstrate that Mg-doped ZnO NWs, especially in the multilayered architecture, hold great promise as advanced building blocks for high-performance, high-sensitivity UV photodetection systems.

  • Synergistic Dual-Mechanism Self-Powered Photodetector with Broadband Polarization Sensitivity for Multifunctional Applications

    by Jiaxuan Wang, Yingtian Xu, Heng Liu, He Zhang, Yunping Lan

    Two-dimensional (2D) photodetectors are a research focus in optoelectronics owing to their excellent flexibility and integration. However, conventional 2D photodetectors typically rely on a single photoresponse mechanism, and studies on synergizing multiple physical mechanisms to enhance detection performance remain insufficient. Herein, we demonstrate a high-performance self-powered Gr/InSe/MoS2 van der Waals heterojunction photodetector with a unilateral depletion n-n junction. By rationally integrating graphene, InSe, and MoS2, the device realizes remarkable synergistic enhancement by dual-mechanism of photovoltaic and photothermoelectric effects. Benefiting from the thermoelectric field induced by the temperature gradient in MoS2 aligns with the built-in field of the n-n junction, effectively promote efficient photocarrier separation and significantly improving the photoresponse. Under zero-bias operation, it exhibits a broadband photoresponse from 355 to 1064 nm, a peak responsivity of 650 mA W−1 at 532 nm, an ultralow dark current of 5.3 × 10−13 A, and a fast rise time of 15.6 μs. Meanwhile, the device displays distinct polarization sensitivity originating from the in-plane anisotropy of InSe. It is successfully applied to image encryption, polarization imaging, and near-infrared optical communication, providing a promising strategy for designing advanced multifunctional self-powered photodetectors.

  • High-Performance Self-Powered Gr/MoS2/WSe2 Heterojunction Photodetector Based on Asymmetric Van Der Waals Contacts

    by Hedong Yao, Yinan Zhang, Heng Liu, He Zhang, Yunping Lan, Yiqiang Gao, Yingtian Xu

    Heterostructures based on transition metal dichalcogenides have shown considerable promise for self-powered photodetectors owing to their strong light−matter interaction and rapid interfacial charge transfer. However, the barrier at the semiconductor/metal interface can hinder efficient carrier transport. Therefore, reducing the Schottky barrier at the semiconductor/metal interface or utilizing the associated built-in electric field is important for improving device performance. In this study, a self-powered Gr/MoS2/WSe2 heterojunction photodetector based on asymmetric van der Waals (vdW) contacts was constructed, in which graphene is introduced as a transparent electrode to improve the contact characteristics of the MoS2/Au interface. Benefiting from carrier regulation by the asymmetric barriers at the Gr/MoS2 and WSe2/Au interfaces, as well as the built-in electric fields with the same direction at the MoS2/WSe2 and WSe2/Au interfaces, the device exhibits rise/fall times of 22/58 μs and a low dark current of 5.54 × 10−13 A. Under self-powered operation, the device exhibits a responsivity of 367 mA/W, an on/off ratio exceeding 106, and photodetection spanning the visible and near-infrared regions. In addition, demonstrations of imaging and near-infrared optical communication further indicate the potential of this heterojunction photodetector for optoelectronic applications.


  • High Speed Dual‐Mode Photodetector of Large‐Area π‐Conjugated Conductive MOFs Film on Si‐Based Substrate

    by Zhanfeng Shi, Yingtian Xu, Yue Kuai, Heng Liu, Zuotong Qu, He Zhang, Yunping Lan

    Two‐dimensional π‐conjugated Ni 3 (HITP) 2 MOFs have attracted widespread attention due to their ordered metal‐ligand coordination and π‐conjugated structure, while its potential in photodetectors is not fully explored. In this work, large‐area Ni 3 (HITP) 2 thin film is integrated with high‐resistivity n‐type silicon to construct a self‐powered photodetector featuring high‐speed and dual‐mode response. Benefiting from a highly delocalized π‐conjugated system enabling efficient charge transport both intra‐layer and inter‐layer, Ni 3 (HITP) 2 acts as an electrode transport layer similar to graphene. By regulating the built‐in electric field with the applied bias, the device operates in photovoltaic mode under zero or negative bias, and switches to photoconductive mode under positive bias. Notably, the device exhibits an ultra‐fast response time of 640 ns under the power density of 2.86 mW/cm 2 at zero bias, along with a high specific detectivity of 2.42 × 10 13 Jones. Its broadband absorption extends the operational wavelength of silicon‐based device to 1550 nm. Additionally, it can produce high‐resolution images in both modes. This study highlights the comprehensive advantages of Ni 3 (HITP) 2 , demonstrating its great potential for silicon‐based optoelectronic integration and intelligent applications.

  • Self-Powered Ultraviolet Photodetectors Based on In Situ Growth Position-Controllable ZnO@Zn 3 (HHTP) 2 Core–Shell Arrays

    by Yanyao Chen, Yingtian Xu, Heng Liu, He Zhang, Yunping Lan, Weiyan Li

    Conjugated conductive metal-organic frameworks (MOFs) have garnered widespread attention in the field of optoelectronics due to their excellent electrical conductivity and unique porous structures. Currently, the interaction between MOF materials and semiconductors predominantly relies on van der Waals forces, which weaken the transport efficiency of interfacial carriers and limit their application in the field of photodetectors. Here, we constructed a ZnO/conjugated conductive MOF core-shell array through in situ growth and successfully fabricated a position-controllable self-powered UV photodetector. Our results confirm that the ordered and controllable microrod array structure can effectively reduce charge hopping at disordered interfaces, promote directional carrier migration, and significantly enhance the photodetector's light absorption efficiency. Furthermore, the conjugated conductive MOFs, which serve as a surface passivation transport layer, function as a functional interface to effectively passivate the surface defects of ZnO, reduce the carrier trapping efficiency, and improve the fast-response characteristics of the device. It is noteworthy that the photodetector fabricated via the in situ growth method achieved a rapid response with a rise time of 1.062 ms and recorded a maximum photovoltaic responsivity of 3109 V/W. This study offers a new perspective for the broader integration of emerging MOF materials into advanced optoelectronic devices.


  • A Single-Laser TDLAS Sensor with Dual-Gas Modulation and BiLSTM-Based Spectral Decoupling for CH 4 /C 2 H 6 Detection

    by Ru Jia Wang, Haifeng Qiu, Bairan Song, He Zhang, Yingtian Xu, Yunping Lan, Jilong Tang, Zhipeng Wei

    Tunable Diode Laser Absorption Spectroscopy (TDLAS) is widely used in trace gas detection because of its high sensitivity and selectivity. However, two persistent challenges restrict its performance in multigas applications: spectral cross-interference and harmonic imbalance. These problems are particularly evident for methane (CH4) and ethane (C2H6), which commonly coexist in natural gas and atmospheric environments and exhibit overlapping absorption features near 1680 nm. In this study, a single-laser TDLAS detection system is developed by integrating a dual-gas modulation strategy with a Bidirectional Long Short-Term Memory (BiLSTM)-based spectral decoupling approach. The proposed modulation scheme dynamically alternates harmonic responses to match the full width at half-maximum (FWHM) of CH4 and C2H6, effectively eliminating the harmonic mismatch that limits simultaneous detection in conventional single-amplitude systems. The BiLSTM model further compensates for the cross-interference caused by the spectral overlap of CH4 and C2H6, thereby enhancing both the accuracy and stability of concentration estimation. During a 200 s stability test, the proposed method maintained consistent performance, yielding standard deviations of 3.66 ppm for 1000 ppm of CH4 and 0.56 ppm for 100 ppm of C2H6. The predicted CH4 and C2H6 concentrations align closely with the reference values, achieving R2 values of 0.99097 and 0.99819, respectively. These results confirm that the combined TDLAS–BiLSTM system significantly improves measurement precision and reliability in dual-gas sensing. Overall, this approach provides a practical and robust solution for accurate concentration retrieval under cross-sensitivity conditions and offers an effective strategy for multicomponent gas analysis.


  • Multigas TDLAS Detection Based on Variational Mode Decomposition: Frequency Division, Filtering and Interference Noise Removal

    by Qin Hu, Yixuan Gao, Chao Ge, Jinguang Lv, He Zhang, Zhipeng Wei, Yingtian Xu, Yunping Lan, Jilong Tang

    Multicomponent gas detection is crucial for industrial and environmental monitoring. In systems based on tunable diode laser absorption spectroscopy (TDLAS), conventional filters with fixed parameters and wide transition bands are unable to effectively separate frequency-adjacent signals or suppress interference fringes, which significantly limits system performance. To address these challenges, we propose the twin-variational mode decomposition demodulation (T-VMD-D) algorithm. This novel approach combines a dual-layer variational mode decomposition architecture with advanced software demodulation techniques, overcoming the inherent limitations of hardware filters. Simulations and experiments demonstrate that the T-VMD-D algorithm achieves significantly higher SNR and robustness in low-interval modulation frequency ranges. At a 100 Hz modulation interval, the algorithm achieves concentration fitting accuracies of 0.9984 (CO2) and 0.9982 (CH4), with detection limits improved to 6.74 ppm and 504.81 ppb, respectively. These results validate the excellent sensitivity and immunity of the method proposed in this paper for practical multicomponent gas detection applications. By adaptively tuning mode decomposition parameters, the framework can be generalized to detect additional gas species, enhancing its versatility in multicomponent sensing scenarios.


  • Interface Engineering of π-Conjugated Conducting Metal–Organic Frameworks for Multiband Self-Powered Photodetector

    by Jiahao Chen, Zhanfeng Shi, Yue Kuai, Yingtian Xu, Heng Liu, He Zhang, Yunping Lan

    Highly two-dimensional π-conjugated metal-organic framework (MOFs) films have attracted significant attention in optoelectronics due to their excellent charge transport properties, strong light absorption, and tunable molecular structures. Compared with conventional inorganic two-dimensional materials, π-conjugated MOF offer greater structural diversity, enhanced optical absorption, and more tunable charge transport pathways, all of which contribute to improved photoelectric conversion efficiency and overall device performance. However, the generation of photocurrent in two-dimensional π-conjugated MOFs is challenging due to their short carrier lifetime. Expanding the application of MOFs films in the field of optoelectronics is therefore worth exploring. In this study, a π-conjugated conductive Ni3(HITP)2 film was prepared using an air-liquid interface growth method and integrated with n-Si to fabricate a p-n junction self-powered photodetector. The built-in electric field of the p-n junction was used to extend the carrier lifetime, while the broadband high absorption of Ni3(HITP)2 was utilized to broaden the operating range of the silicon-based detector. This photodetector exhibits ultrahigh speed (rise time of 5.9 μs, fall time of 64 μs), high responsivity (0.618 A/W), and high quantum efficiency (94%). Additionally, theoretical calculations revealed a low barrier between Ni3(HITP)2 and n-Si, contributing to the device's fast response. This study presents a new approach to high-performance π-conjugated MOFs hybrid optoelectronics through the development of Ni3(HITP)2-based photodetectors.


  • Interfacial π‐Electron Cloud Extension and Charge Transfer Between Preferable Single‐Crystalline Conjugated MOFs and Graphene for Ultrafast Pulse Generation

    by Heng Liu, Yixin Ding, Yingtian Xu, Yue Kuai, Jiahao Chen, He Zhang, Yunping Lan, Zhipeng Wei

    2D conjugated metal‐organic frameworks (MOFs) have attracted significant attention in various fields due to their outstanding characteristics. However, due to the strong interlayer π–π stacking interactions, the preparation of high‐quality and atomic‐scale single‐crystalline conjugated MOF structures continues to pose a significant challenge. The investigation of its nonlinear optical (NLO) property and application for ultrafast photonics is still rare. Herein, the ultrathin Cu 3 (HHTP) 2 and Ni 3 (HHTP) 2 (HHTP = 2,3,6,7,10,11‐hexahydroxytriphenylene) nanosheets (CuHHTPNs and NiHHTPNs) with single‐crystalline characteristic are prepared by surfactant‐assisted solution synthesis strategy. Moreover, the π–π stacked CuHHTPNs(NiHHTPNs)/graphene van der Waals heterostructures (CuNsG‐VHS and NiNsG‐VHS) are achieved by ultrasound‐assisted method. According to characterization analyses and theoretical simulations, this preferable stacking ultrathin van der Waals heterostructures exhibits superior π‐conjugated electron cloud extension, charge transfer, and NLO properties. Noticeably, the third‐order NLO polarizability of CuNsG‐VHS keeps in a relatively high level compared with the reported 2D saturable absorber materials in the near‐infrared wavelength range. Based on these outstanding properties, CuNsG‐VHS can serve as an excellent saturable absorber to achieve fundamental mode‐locking with femtosecond pulse duration, and high‐order harmonic mode‐locking with GHz repetition frequency. These demonstrations provide a valuable strategy for the development of promising conjugated MOFs for ultrafast photonics and advanced optoelectronic devices.