GWGlen Walters

Glen Walters

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Glen Walters has a total of 25 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Preisach modeling of imprint on hafnium zirconium oxide ferroelectric capacitors

    by Paul Chojecki, Glen Walters, Zane Forrester, Toshikazu Nishida

    Imprint, the preferential orientation of the polarization of a ferroelectric device subjected to elevated temperatures, is a primary reliability concern afflicting data retention in ferroelectric RAM. In this paper, we demonstrate Preisach-based hysteresis modeling, which can be used to predict imprint behavior in ferroelectric thin films. A method was developed for capturing imprint in the context of a Preisach model and a numerical approach for evaluating the Preisach distribution was expanded upon. Interpolation and curve fitting were used to make predictions of the Preisach distributions of imprinted ferroelectric hafnium zirconium oxide devices after short-duration bakes at 23–260 °C and long-term bakes at 85 and 125 °C. In the case of long-term bakes, imprint-induced coercive shifts were modeled as shifts in the derivative of the top and bottom hysteretic polarization curves. The shift in the curves is modeled by fitting experimental data to a commonly used empirically logarithmic relationship reported in the literature. Simulations give remanent polarizations and coercive fields within μC/cm2 and 0.1 V, respectively, of the raw data average.


  • Open Access

    10.1063/1.5134856.1

    by G. Walters, T. Nishida, R. Tabrizian

    This paper reports a 30 nm-thick integrated nano-electro-mechanical resonator based on atomically engineered ferroelectric hafnium zirconium oxide (Hf0.5Zr0.5O2) film. A 10 nm-thick Hf0.5Zr0.5O2 layer is atomically engineered through capping with 10 nm-thick titanium nitride (TiN) layer and rapid thermal annealing to promote the orthorhombic crystal phase with strong ferroelectric properties. The resulting metal-ferroelectric-metal (MFM) membrane is then patterned to create an integrated nano-electro-mechanical resonator with an overall thickness of 30 nm and a planar-to-vertical aspect ratio exceeding 104:1. Benefiting from large electrostrictive effects in ferroelectric Hf0.5Zr0.5O2, the 30 nm-thick nanomechanical resonator is excited into flexural resonance at 195 kHz with a very large vibration amplitude of ∼100 nm. The transmission response of the nano-electro-mechanical resonator is extracted, using a two-port apodization of the TiN electrodes, showing quality factors (Q) of 15 and 3300 at atmospheric and 10−7 Torr ambient pressures, respectively. Finally, the structural robustness of the MFM nano-membrane is explored through the application of a ∼24 μm deflection, using a point-force by a micro-probe, highlighting the extended elasticity despite the small thickness and ultra-high aspect ratio. The atomic-level thickness, fully integrated operation, high Q, and structural robustness of the Hf0.5Zr0.5O2-based nano-membrane resonator promise its potential for the realization of highly integrated transducers for chip-scale classical and quantum information processing and sensing applications.This paper reports a 30 nm-thick integrated nano-electro-mechanical resonator based on atomically engineered ferroelectric hafnium zirconium oxide (Hf0.5Zr0.5O2) film. A 10 nm-thick Hf0.5Zr0.5O2 layer is atomically engineered through capping with 10 nm-thick titanium nitride (TiN) layer and rapid thermal annealing to promote the orthorhombic crystal phase with strong ferroelectric properties. The resulting metal-ferroelectric-metal (MFM) membrane is then patterned to create an integrated nano-electro-mechanical resonator with an overall thickness of 30 nm and a planar-to-vertical aspect ratio exceeding 104:1. Benefiting from large electrostrictive effects in ferroelectric Hf0.5Zr0.5O2, the 30 nm-thick nanomechanical resonator is excited into flexural resonance at 195 kHz with a very large vibration amplitude of ∼100 nm. The transmission response of the nano-electro-mechanical resonator is extracted, using a two-port apodization of the TiN electrodes, showing quality factors (Q) of 15 and 3300 at atmospher...

  • A 30-nm thick integrated hafnium zirconium oxide nano-electro-mechanical membrane resonator

    by M. Ghatge, G. Walters, T. Nishida, R. Tabrizian

    This paper reports a 30 nm-thick integrated nano-electro-mechanical resonator based on atomically engineered ferroelectric hafnium zirconium oxide (Hf0.5Zr0.5O2) film. A 10 nm-thick Hf0.5Zr0.5O2 layer is atomically engineered through capping with 10 nm-thick titanium nitride (TiN) layer and rapid thermal annealing to promote the orthorhombic crystal phase with strong ferroelectric properties. The resulting metal-ferroelectric-metal (MFM) membrane is then patterned to create an integrated nano-electro-mechanical resonator with an overall thickness of 30 nm and a planar-to-vertical aspect ratio exceeding 104:1. Benefiting from large electrostrictive effects in ferroelectric Hf0.5Zr0.5O2, the 30 nm-thick nanomechanical resonator is excited into flexural resonance at 195 kHz with a very large vibration amplitude of ∼100 nm. The transmission response of the nano-electro-mechanical resonator is extracted, using a two-port apodization of the TiN electrodes, showing quality factors (Q) of 15 and 3300 at atmospheric and 10−7 Torr ambient pressures, respectively. Finally, the structural robustness of the MFM nano-membrane is explored through the application of a ∼24 μm deflection, using a point-force by a micro-probe, highlighting the extended elasticity despite the small thickness and ultra-high aspect ratio. The atomic-level thickness, fully integrated operation, high Q, and structural robustness of the Hf0.5Zr0.5O2-based nano-membrane resonator promise its potential for the realization of highly integrated transducers for chip-scale classical and quantum information processing and sensing applications.


  • Open Access

    Effect of in situ hydrogen plasma on the ferroelectricity of hafnium zirconium oxide films

    by Glen Walters, Aniruddh Shekhawat, Saeed Moghaddam, Jacob L. Jones, Toshikazu Nishida

    The emerging field of ferroelectric hafnium zirconium oxide has garnered increased attention recently for its wide array of applications from nonvolatile memory and transistor devices to nanoelectromechanical transducers. Atomic layer deposition is one of the preferred techniques for the fabrication of hafnium zirconium oxide thin films, with a standard choice of oxidizer being either O3 or H2O. In this study, we explore various oxidizing conditions and report on the in situ treatment of hydrogen plasma after every atomic layer during the deposition of hafnium zirconium oxide to increase the virgin state polarization. Three different oxidization methods were utilized during the fabrication of the Hf0.5Zr0.5O2 films: H2O, O2 plasma, and O2 plasma followed by H2 plasma. The 10 and 8 nm thick films oxidized with only O2 plasma result in initially anti-ferroelectric films. Comparatively, the addition of H2 plasma after every O2 plasma step results in films with strong ferroelectric behavior. Peak shifting of the GIXRD pattern suggests that the sequential O2-H2 plasma films tend more to the orthorhombic phase as compared to the O2 plasma and H2O oxidized films.


  • Effect of furnace annealing on the ferroelectricity of Hf0.5 Zr0.5O2 thin films

    by Aniruddh Shekhawat, Glen Walters, Ching-Chang Chung, Roberto Garcia, Yang Liu, Jacob Jones, Toshikazu Nishida, Saeed Moghaddam


  • A Non-Reciprocal Filter Using Asymmetrically Transduced Micro-Acoustic Resonators

    by Mayur Ghatge, Glen Walters, Toshikazu Nishida, Roozbeh Tabrizian

    This letter reports a non-reciprocal filter based on the use of nonlinearities in high quality-factor (Q) silicon microacoustic resonators with asymmetric piezoelectric transducers. The two-port resonators are created by integration of 120nm piezoelectric aluminum nitride and 10nm ferroelectric hafniumzirconium-oxide transducers atop of 70nm single crystal silicon. The asymmetric electromechanical transduction architecture results in highly contrasted power-handing of the micro-acoustic resonator when excited at different ports, resulting in nonreciprocal transmission response for excitation powers beyond a certain threshold. A proof-of-concept filter at 253MHz with 0.25%-3dB-bandwidth is implemented through electrical coupling of two asymmetrically transduced resonators with individual Q of ~870. The filter demonstrates a non-reciprocal transmission ratio of ~16dB for input power exceeding 5dBm.


  • A Nano-Mechanical Resonator with 10nm Hafnium-Zirconium Oxide Ferroelectric Transducer

    by M. Ghatge, G. Walters, T. Nishida, R. Tabrizian

    This paper reports, for the first time, on a 10nm hafnium-zirconium oxide (Hf 0.5 Zr 0.5 O 2 ) (HZO) piezoelectric transducer for nano-electromechanical systems (NEMS). The super-thin HZO films are engineered through atomic-level stacking, capping with titanium nitride (TiN) electrodes, and proper thermo-mechanical treatment, to realize ferroelectric transducers with large piezoelectric properties. The developed 10nm transducer is used for excitation of a silicon-based multi-morph nano-mechanical resonator, with an overall thickness of ~350nm, at ~4MHz. The developed resonator, along with 120nm aluminum-nitride (AlN) transduced counterparts, are also used as test-vehicles to characterize ferroelectric and piezoelectric properties. Benefiting from large piezoelectric coefficient (e 31,HZO ≈ 2.3e 31AlN ), fully conformal deposition, and CMOS-compatibility, ALD-deposited 10nm HZO transducer paves the way for realization of truly monolithic cm- and mm-wave RF front-ends for the emerging 5G wireless communication systems, and extreme/3D integration of NEMS sensors and actuators.


  • Tiered deposition of sub-5 nm ferroelectric Hf1-xZrxO2 films on metal and semiconductor substrates

    by Glen Walters, Aniruddh Shekhawat, Nicholas G. Rudawski, Saeed Moghaddam, Toshikazu Nishida

    Using a tiered deposition approach, Hf1-xZrxO2 (HZO) films with varying atomic layer deposition (ALD) cycles from 36 to 52 cycles were grown on Ge, Ir, and TiN substrates in single runs and annealed at 500 °C. 40 ALD cycle films grown on Ir exhibit a switched polarization (Psw) of 13 μC/cm2, while those grown on Ge and TiN did not exhibit measurable Psw values until 44 and 52 ALD cycles, respectively. High-resolution cross-sectional transmission electron microscopy confirmed these results; the ferroelectric films are crystalline with defined lattice fringes, while non-ferroelectric films remain amorphous. 52 ALD cycle 1:1 HZO grown on Ge had the highest Psw of all the films fabricated at 39 μC/cm2, while the 1:1 HZO grown on TiN displayed continuous wake-up and no fatigue up to 1010 cycles with the Psw increasing from μC/cm2 to 21 μC/cm2.


  • High-temperature and high-field cycling reliability of PZT films embedded within 130 nm CMOS

    by G. Walters, P. Chojecki, A. Garraud, T. Nishida, S. Summerfelt, J. A. Rodriguez, A. G. Acosta

    We present a systematic reliability study of PZT polarization retention after exposure to high temperatures and high-field cycling. After a 260 °C Pb-free solder assembly reflow-like exposure, a signal margin of >10 μC/cm 2 is achieved at a read voltage of 1 V. Extraction of the Preisach distribution after thermal depolarization and restore exhibits an increase in the positive coercive voltage by 45 % while the negative coercive voltage shows minimal deviation (<;7 %). Under accelerated aging via high electric fields (2.4 V), maximum wake-up at 10 6 cycles followed by fatigue >10 8 cycles is observed. Asymmetry in coercive voltage is minimized after wakeup and remanent polarization maximized. After fatigue, a signal margin >10 μC/cm 2 is maintained for read voltages >0.8 V.


  • Phononic detection of morphological phase transition in atomic-layered Hafnium-Zirconium-Oxide

    by Mayur Ghatge, Glen Walters, Toshikazu Nishida, Roozbeh Tabrizian

    This paper presents a novel technique for high resolution spectroscopy of the morphology and dynamic phase transitions in atomically synthesized polymorph films with sub-10nm thickness. A multi-mode nanoresonant test-vehicle is developed to excite and trap acoustic phonons in the ultra-thin polymorph film. The dispersion signature of the phonons is interrogated, using digital holographic microscopy, to extract the morphological content of the film and its dynamics under device-level thermal treatments. As a proof of concept, the notion of the phononic spectroscopy is demonstrated for the in-situ detection of crystal phase transitions in a ~10nm thick Hafnium-Zirconium-Oxide film. The phononic constituents of multiple resonance modes of the testvehicle are extracted to construct the dispersion signature of the film, before and after crystal phase transition stimulation through in-situ rapid thermal annealing. The experimentally extracted phononic dispersion diagram is compared with the numerically extracted counterpart to confirm the fractional transition between tetragonal and orthorhombic phases in the film.