Jian Chen

This paper investigates the impact of doubly-fed induction generator (DFIG) wind farms on system stability in multi-generator power systems with low-frequency oscillations (LFOs). To this end, this paper establishes the interconnection model of the equivalent generators and derives the system state equation. On this basis, an updated system state equation of the new power system with integrated wind power is further derived. Then, according to the updated system state equation, the impact factors that cause changes in the system damping characteristics are presented. The IEEE two-area four-machine power system is used as a simulation model in which the LFOs occur. The simulation results demonstrate that the connection of wind power to the power feeding area (PFA) increases the damping ratio of the dominant mode of inter-area oscillation from −0.0263 to −0.0107, which obviously improves the system stability. Furthermore, the wind power integration into PFA, as the connection distance of the wind power increases, gradually decreases the damping ratio of the dominant mode of the inter-area oscillation to −0.0236, approaching that of no wind power in the system. Meanwhile, with the increase in the wind power output capacity, the damping ratio of the dominant mode of the intra-area and inter-area oscillation increases, and the maximum damping ratios reach 0.1337 and 0.0233, respectively.

To comply with electric power grid automation strategies, new cyber-security protocols and protection are required. What we now experience is a new type of protection against new disturbances namely cyber-attacks. In the same vein, the impact of disturbances arising from faults or cyber-attacks should be surveyed by network vulnerability criteria alone. It is clear that the diagnosis of vulnerable points protects the power grid against disturbances that would inhibit outages such as blackouts. So, the first step is determining the network vulnerable points, and then proposing a support method to deal with these outages. This research proposes a comprehensive approach to deal with outages by determining network vulnerable points due to physical faults and cyber-attacks. The first point, the network vulnerable points against network faults are covered by microgrids. As the second one, a new cyber-security protocol named multi-layer security is proposed in order to prevent targeted cyber-attacks. The first layer is a cyber-security-based blockchain method that plays a general role. The second layer is a cyber-security-based reinforcement-learning method, which supports the vulnerable points by monitoring data. On the other hand, the trend of solving problems becomes routine when no ambiguity arises in different sections of the smart grid, while it is far from a big network’s realities. Hence, the impact of uncertainty parameters on the proposed framework needs to be considered. Accordingly, the unscented transform method is modeled in this research. The simulation results illustrate that applying such a comprehensive approach can greatly pull down the probability of blackouts.

One of the main reasons that affecting the stability of power systems is low frequency oscillation (LFO). The existence of noise influences the accuracy of LFO mode identification extracted from wide-area measurement system (WAMS). The wavelet threshold de-noising is widely used in signal processing. In this paper, wavelet soft threshold is illustrated to attenuate the noise of LFO signal, the optimal wavelet basis and decomposition level for de-noising LFO signal with noise are obtained and verified by experiments. Following the signal de-noising, an improved Matrix Pencil (MP) algorithm is used for mode identification of LFO. This improvement particularly lies in the ratio of adjacent singular entropy increment difference (RASEID) designed as an adaptive order determination method in the MP algorithm proposed in the paper. RASEID not only makes the MP algorithm adaptive, but also enhances the stability of the order determination in the mode identification process. The proposed method ensures the accuracy of mode identification with lower sensitivity to noise interference. Finally, the validity of the proposed method is verified by three cases studies. The first study is on the analysis of synthetic signal typically performed in many literatures. The second study is to identify the mode of active power LFO signal which is generated by IEEE four-generator and two-area system given with disturbance on RT-LAB experimental platform. The third study is the oscillation analysis of the actual LFO data in the North American power grid. The results validate the feasibility of the proposed method for mode identification of noisy LFO.