PRPascual D. Hilario Re

Pascual D. Hilario Re

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Pascual D. Hilario Re has a total of 26 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Sectorized FMCW MIMO Radar by Modular Design With Non-Uniform Sparse Arrays

    by Cristian A. Alistarh, Symon K. Podilchak, Pascual D. Hilario Re, Thomas M. Strober, Yan Pailhas, Carolina Mateo-Segura, Mathini Sellathurai, George Goussetis, Yvan R. Petillot, John S. Thompson, et al.

    Automotive radars are designed to enhance road user safety and reduce the number of accidents on public roads and there is a constant demand to improve the performance for these radars. In this paper, a novel proof-of-concept multiple-input multiple-output (MIMO) radar architecture is presented by frequency modulated continuous waveform (FMCW) transmission. For enhanced angular resolution, the radar uses a two-tier antenna setup leading to a sparse array arrangement, mainly in an effort to mitigate grating lobes and to offer different illuminations of the same scenario. Also, the experimentally verified sparse radar antenna designed for target detection at the receiver, achieves modest sidelobe levels and grating lobes well below 12 dB from the main beam maximum, whilst still maintaining competitive half-power beamwidths when compared to more conventionally spaced arrays. Moreover, the high impedance bandwidth of this receiver array and the supporting radar electronics (more than 6%) allows for the detection of targets at only a 10 cm spatial separation. The complete system is also capable of seeing a wide field-of-view (FOV) since it utilizes a network of radar modules to cover the forward −90$^\circ$ to +90$^\circ$ angular range by sectorization. In the best case, the measured radar system can resolve targets that are a distance of just $\pm 2^\circ$ apart in angular separation.


  • Compact Leaky-Wave SIW Antenna With Broadside Radiation and Dual-Band Operation for CubeSats

    by Maksim V. Kuznetcov, Symon K. Podilchak, Miguel Poveda-Garcia, Pascual Hilario, Cristian A. Alistarh, George Goussetis, Jose Luis Gomez-Tornero

    This letter presents a substrate-integrated waveguide (SIW) antenna for CubeSat applications. The compact structure utilizes middle-point feeding and shorting walls to achieve broadside radiation in the far-field at two distinct frequencies. In particular, this dual-frequency behavior is related to the transition from a dominant leaky wave (LW) on the aperture at lower frequencies to more hybrid radiation (at higher frequencies) due to LW fields and structure resonance due to truncation. This response is generated by the shorting vias at the lateral ends of the SIW antenna. Given these conditions, the developed leaky-wave antenna (LWA) prototype is well matched ( $|S_{11}|$ $\leq$ −10 dB) from 23.2 to 23.5 GHz and 24.8 to 25.2 GHz with realized gains of 8 and 6 dBi, respectively. Maximum efficiency (including the connector) is around 87%. Such dual-frequency operation could enable up-link and down-link operation in the K-band. Overall dimensions of the antenna are 2 $\lambda _0$ × 2.6 $\lambda _0$ (at the lower frequency). Possible placement on CubeSats can be underneath solar panels, thus increasing the available surface area for solar power harvesting. Also, to the best knowledge of the authors, no similar dual-frequency SIW-LWA has been previously reported.


  • Open Access

    FMCW Radar With Enhanced Resolution and Processing Time by Beam Switching

    by Pascual D. Hilario Re, Davide Comite, Symon K. Podilchak, Cristian A. Alistarh, George Goussetis, Mathini Sellathurai, John Thompson, Jaesup Lee

    We present the design of a novel K-band radar architecture for short-range target detection. Applications include direction finding systems and automotive radar. The developed system is compact and low cost and employs substrate-integrated-waveguide (SIW) antenna arrays and a 4×4 Butler matrix (BM) beamformer. In particular, the proposed radar transmits a frequency modulated continuous-wave (FMCW) signal at 24 GHz, scanning the horizontal plane by switching the four input ports of the BM in time. Also, in conjunction with a new processing method for the received radar signals, the architecture is able to provide enhanced resolution at reduced computational burden and when compared to more standard single-input multiple-output (SIMO) and multiple-input multiple-output (MIMO) systems. The radar performance has also been measured in an anechoic chamber and results have been analyzed by illuminating and identifying test targets which are 2° apart, while also making comparisons to SIMO and MIMO FMCW radars. Moreover, the proposed radar architecture, by appropriate design, can also be scaled to operate at other microwave and millimeter-wave frequencies, while also providing a computationally efficient multi-channel radar signal processing platform.


  • Efficient Rectifier for Wireless Power Transmission Systems

    by Samuel A. Rotenberg, Symon K. Podilchak, Pascual D. Hilario Re, C. Mateo-Segura, George Goussetis, Jaesup Lee

    This article describes a full-bridge rectifier and a receiving antenna array for operation within an innovative wireless power transmission (WPT) system. A high-power transmitter using circularly polarized free-space waves and based on a retrodirective antenna array technology is also employed to boost the overall received RF power at the input of the rectenna. To the best of our knowledge, the proposed rectifier circuit and active antenna configuration are the first demonstration of a high-power beam tracking system for WPT scenarios, being different from previously reported near-field coupling and other lower power harvesting schemes. The main focus of this article is the rectifier design, its bench-top measurements, and operation in such a retrodirective, self-tracking microwave system. A novel approach based on in-phase multitone input signals is also developed to improve rectifier efficiency. The rectifier size is 4.5 cm by 2 cm and can offer more than 86% and 75% RF-to-dc rectification efficiency at 27 dBm for an input signal at 1.7 and 2.4 GHz, respectively. This rectifier circuit component can also be employed in other communication applications or WPT systems, for example, to convert to dc received RF signals or power in the radiating near- and far-field in order to wirelessly charge the batteries of home electronics, such as smartphones, tablets, or Internet of Things (IoT) devices.


  • Open Access

    Dual-Polarized Aperture-Coupled Patch Antennas With Application to Retrodirective and Monopulse Arrays

    by Paul Le Bihan, Pascual D. Hilario Re, Davide Comite, Maksim Kuznetcov, Symon K. Podilchak, Column Tucker, Kieran Maccoll, Yelzhas Zhaksylyk, Maria Garcia-Vigueras, Mathini Sellathurai, et al.

    An isolation technique, which does not require conventional circulators, is proposed for the realization of a simple and low-cost aperture-coupled circularly polarized antenna for application to full-duplex devices. The approach is based on the use of slotlines loops to provide surface current cancellation in specific regions of the antenna structure, leading to improved axial ratio and isolation between the ports in excess of 50 dB. Circular polarization is achieved by introducing a double-box hybrid coupler, which is optimized to obtain good matching and isolation of the quadrature signals. On this basis, both right-and left-hand circularly polarized beams are achieved by interchanging the transmitting and receiving antenna ports, enabling full-duplex operation and reconfigurability. While the antenna structure is designed for 2.45 GHz operation, one can take advantage of the proposed approach to tune the frequency of maximum isolation. Both single-element prototypes as well as a 2x2 array are fabricated and measured, showing good agreement with the simulations and validating the proposed isolation approach. The beam steering capabilities as well as the application to a Van Atta retrodirective antenna array and the possibilities of achieving delta and sum patterns for monopulse operation are also reported. The proposed full-duplex antenna can also represent an excellent solution for narrowband wireless power transmission systems.


  • Radially Periodic Leaky-Wave Antenna for Bessel Beam Generation Over a Wide-Frequency Range

    by Davide Comite, Walter Fuscaldo, Symon K. Podilchak, Pascual D. Hilario Re, Victoria Gomez-Guillamon Buendia, Paolo Burghignoli, Paolo Baccarelli, Alessandro Galli

    A radially periodic 2-D leaky-wave (LW) antenna is studied for the generation of zeroth-order Bessel beams within a limited spatial region and over a wide-frequency range. The antenna design is wideband and based on an annular metal strip grating placed on the top of a grounded dielectric slab, supporting a cylindrical leaky wave (CLW) with a fast backward spatial harmonic. The focusing capabilities of the relevant LW aperture fields are investigated over the considered frequency range (15-21 GHz), in conjunction with the dispersion analysis of the optimized structure, which is developed by means of an efficient in-house method of moments code. Full-wave simulations using a commercial tool including a simple coaxial feeder are presented and discussed, demonstrating the desired wideband operation. The antenna design is validated by means of measurements performed on a manufactured prototype, considering different frequencies and components of the electric field within the nondiffracting range of the system. The proposed design represents an attractive simple and low-cost solution potentially able to generate arbitrary-order Bessel beams at microwaves as well as in the millimeter-wave and terahertz frequency regions.