Omer Haliloglu
Omer Haliloglu has a total of 26 co-authors. Here are the top co-authors by number of shared publications:
- Cenk Toker
Department of Electrical and Electronics Engineering, Hacettepe University, Ankara, Turkey
4 shared publications - Fehmi Emre Kadan
VIAVI Marconi Labs, VIAVI Solutions Inc., Stevenage, U.K.
3 shared publications - Gurhan Bulu
Department of Electrical and Electronics Engineering, Hacettepe University, Ankara, Turkey
3 shared publications Halim Yanikomeroglu
Department of Systems and Computer Engineering, Carleton University, Ottawa, Canada
2 shared publicationsMehmet Safak
Elektrik ve Elektronik Mühendisliği Bölümü, Hacettepe Üniversitesi, Turkey
2 shared publications- Abdulkadir Celik
University of Southampton
1 shared publication
Latest Publications
- Open Access
- 14 October 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Wireless Communications
- Vol. 32 (6) , 35-43
Towards Robust Space- and Frequency-Domain Cooperative Distributed-Large MIMO Systems
Multiple-input multiple-output (MIMO) is a technique that has been extensively studied and successfully implemented in various communication systems over the past few decades. It has been a key technology in both 4G and 5G mobile communication systems and will be a key enabler in 6G to support the extreme requirements of data rate, energy efficiency (EE), etc. However, meeting these requirements necessitates evolution in the architecture of massive MIMO systems, and distributed MIMO (D-MIMO) has garnered significant attention as a potential solution. This article articulates one of the key findings on adaptive large MIMO systems from the Hexa-X-II European 6G Flagship project and provides a vision of what large MIMO systems may entail in 6G. To achieve this, we examine an adaptive deployment strategy in a joint co-located and distributed MIMO setup, including the utilization of different carrier frequencies and coordinated transmission under an ideal channel state information assumption. We evaluate EE and data rate across various user densities. Additionally, we provide a framework to select the MIMO architecture based on user density and spatial distribution. The key challenges and future research directions on robust large MIMO systems towards realistic 6G networks are also discussed.
- 14 October 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Wireless Communications
- Vol. 32 (6) , 35-43
Open AccessTowards Robust Space- and Frequency-Domain Cooperative Distributed-Large MIMO Systems
Multiple-input multiple-output (MIMO) is a technique that has been extensively studied and successfully implemented in various communication systems over the past few decades. It has been a key technology in both 4G and 5G mobile communication systems and will be a key enabler in 6G to support the extreme requirements of data rate, energy efficiency (EE), etc. However, meeting these requirements necessitates evolution in the architecture of massive MIMO systems, and distributed MIMO (D-MIMO) has garnered significant attention as a potential solution. This article articulates one of the key findings on adaptive large MIMO systems from the Hexa-X-II European 6G Flagship project and provides a vision of what large MIMO systems may entail in 6G. To achieve this, we examine an adaptive deployment strategy in a joint co-located and distributed MIMO setup, including the utilization of different carrier frequencies and coordinated transmission under an ideal channel state information assumption. We evaluate EE and data rate across various user densities. Additionally, we provide a framework to select the MIMO architecture based on user density and spatial distribution. The key challenges and future research directions on robust large MIMO systems towards realistic 6G networks are also discussed.
- Open Access
- 25 April 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Machine Learning in Communications and Networking
- Vol. 3, 644-658
Unsupervised Learning for Distributed Downlink Power Allocation in Cell-Free mMIMO Networks
Cell-free massive multiple-input multiple-output (CF-mMIMO) surmounts conventional cellular network limitations in terms of coverage, capacity, and interference management. This paper aims to introduce a novel unsupervised learning framework for the downlink (DL) power allocation problem in CF-mMIMO networks, utilizing only large-scale fading (LSF) coefficients as input, rather than the hard-to-obtain exact user location or channel state information (CSI). Both centralized and distributed CF-mMIMO power control learning frameworks are explored, with deep neural networks (DNNs) trained to estimate power coefficients while addressing the constraints of pilot contamination and power budgets. For both learning frameworks, the proposed approach is utilized to maximize three well-known power control objectives under maximum-ratio and regularized zero-forcing precoding schemes: 1) sum of spectral efficiency, 2) the minimum signal-to-interference-plus-noise ratio (SINR) for max-min fairness, and 3) the product of SINRs for proportional fairness, for each of which customized loss functions are formulated. The proposed unsupervised learning approach circumvents the arduous task of training data computations, typically required in supervised learning methods, bypassing the use of conventional complex optimization methods and heuristic methodologies. Furthermore, an LSF-based radio unit (RU) selection algorithm is employed to activate only the contributing RUs, allowing efficient utilization of network resources. Simulation results demonstrate that our proposed unsupervised learning framework outperforms existing supervised learning and heuristic solutions, showcasing an improvement of up to 20% in spectral efficiency and more than 40% in terms of energy efficiency compared to state-of-the-art supervised learning counterparts.
- 25 April 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Machine Learning in Communications and Networking
- Vol. 3, 644-658
Open AccessUnsupervised Learning for Distributed Downlink Power Allocation in Cell-Free mMIMO Networks
Cell-free massive multiple-input multiple-output (CF-mMIMO) surmounts conventional cellular network limitations in terms of coverage, capacity, and interference management. This paper aims to introduce a novel unsupervised learning framework for the downlink (DL) power allocation problem in CF-mMIMO networks, utilizing only large-scale fading (LSF) coefficients as input, rather than the hard-to-obtain exact user location or channel state information (CSI). Both centralized and distributed CF-mMIMO power control learning frameworks are explored, with deep neural networks (DNNs) trained to estimate power coefficients while addressing the constraints of pilot contamination and power budgets. For both learning frameworks, the proposed approach is utilized to maximize three well-known power control objectives under maximum-ratio and regularized zero-forcing precoding schemes: 1) sum of spectral efficiency, 2) the minimum signal-to-interference-plus-noise ratio (SINR) for max-min fairness, and 3) the product of SINRs for proportional fairness, for each of which customized loss functions are formulated. The proposed unsupervised learning approach circumvents the arduous task of training data computations, typically required in supervised learning methods, bypassing the use of conventional complex optimization methods and heuristic methodologies. Furthermore, an LSF-based radio unit (RU) selection algorithm is employed to activate only the contributing RUs, allowing efficient utilization of network resources. Simulation results demonstrate that our proposed unsupervised learning framework outperforms existing supervised learning and heuristic solutions, showcasing an improvement of up to 20% in spectral efficiency and more than 40% in terms of energy efficiency compared to state-of-the-art supervised learning counterparts.
- 23 August 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Wireless Communications Letters
- Vol. 12 (12) , 2093-2097
An Efficient Resource Block Allocation Method in Distributed MIMO
This study derives a resource block allocation method for maximal ratio transmission in distributed multiple-input multiple-output networks. We first show that the minimum signal-to-interference-and-noise ratio of users jointly served within a time-frequency resource block is upper bounded by a quantity depending on long-term channel statistics. Inspired from the bound expression, we develop an efficient partitioning technique to distribute the users into a given number of time-frequency resource blocks so that the minimum spectral efficiency is maximized. We show that the original problem is NP-hard, and the detailed simulations verify that the proposed method provides a high-performance and low-complexity solution.
- 23 August 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Wireless Communications Letters
- Vol. 12 (12) , 2093-2097
An Efficient Resource Block Allocation Method in Distributed MIMO
This study derives a resource block allocation method for maximal ratio transmission in distributed multiple-input multiple-output networks. We first show that the minimum signal-to-interference-and-noise ratio of users jointly served within a time-frequency resource block is upper bounded by a quantity depending on long-term channel statistics. Inspired from the bound expression, we develop an efficient partitioning technique to distribute the users into a given number of time-frequency resource blocks so that the minimum spectral efficiency is maximized. We show that the original problem is NP-hard, and the detailed simulations verify that the proposed method provides a high-performance and low-complexity solution.
- 23 August 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Wireless Communications Letters
- Vol. 12 (12) , 2098-2102
Alamouti-Like Transmission Schemes in Distributed MIMO Networks
In this study, we investigate the potential benefits of using Alamouti-like orthogonal space-time-frequency block codes (STFBC) in distributed multiple-input multiple-output (D-MIMO) systems. We derive a closed-form ergodic spectral efficiency (SE) formula, numerically calculate outage SEs, and propose a centralized method for clustering radio units and user equipment so that a suitable STFBC is applied within each cluster. The results show that STFBCs together with an optimized clustering significantly outperform baseline techniques in terms of both ergodic and outage SE when there is no instantaneous channel state information at the time of transmission.
- 23 August 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Wireless Communications Letters
- Vol. 12 (12) , 2098-2102
Alamouti-Like Transmission Schemes in Distributed MIMO Networks
In this study, we investigate the potential benefits of using Alamouti-like orthogonal space-time-frequency block codes (STFBC) in distributed multiple-input multiple-output (D-MIMO) systems. We derive a closed-form ergodic spectral efficiency (SE) formula, numerically calculate outage SEs, and propose a centralized method for clustering radio units and user equipment so that a suitable STFBC is applied within each cluster. The results show that STFBCs together with an optimized clustering significantly outperform baseline techniques in terms of both ergodic and outage SE when there is no instantaneous channel state information at the time of transmission.
- 5 January 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Wireless Communications Letters
- Vol. 12 (4) , 585-589
A Performance Bound for Maximal Ratio Transmission in Distributed MIMO
This study derives a theoretical performance bound for maximal ratio transmission in distributed multiple-input multiple-output systems. We first show that the sum signal-to-interference-and-noise ratio (SINR) of K users co-scheduled within the same time-frequency resource block is upper bounded by the total number M of radio units. The asymptotic equality case provides a low-complexity power control method. We also show that when max-min fairness power control is applied, SINRs become limited to M’/(K+ρ) where M’≤M and ρ are channel-statistics-dependent parameters. The simulation results show the effectiveness of the methods in optimizing user spectral efficiencies.
- 5 January 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Wireless Communications Letters
- Vol. 12 (4) , 585-589
A Performance Bound for Maximal Ratio Transmission in Distributed MIMO
This study derives a theoretical performance bound for maximal ratio transmission in distributed multiple-input multiple-output systems. We first show that the sum signal-to-interference-and-noise ratio (SINR) of K users co-scheduled within the same time-frequency resource block is upper bounded by the total number M of radio units. The asymptotic equality case provides a low-complexity power control method. We also show that when max-min fairness power control is applied, SINRs become limited to M’/(K+ρ) where M’≤M and ρ are channel-statistics-dependent parameters. The simulation results show the effectiveness of the methods in optimizing user spectral efficiencies.
- 1 May 2016
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1397-1400
Under feedback and interference constraints uplink power control in two-tier networks
This paper considers optimum uplink power control policy that maximizes total sum-rate without any interference cancellation techniques under interference and feedback constraints at next generation communication systems. System model has two tier and it is assumed that the feedback channel between these tiers has finite capacity. Second tier users (STU) cause interference on first tier users (FTU) and base station (FTB) while communicating with second tier base station (STB). In proposed scenario, this interference power on first tier network is limited at a certain level. To this end, two different feedback policies are proposed. The first one is determining the K smallest interference channel coefficients of STUs by FTU and sending them to STB. The other policy is that STB requests the interference channel information of K users that have the best direct channel state from FTB. Due to proposed scenario is not a convex problem, it is solved with DC programming well-studied in literature before and performances of proposed feedback policies are compared.
- 1 May 2016
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1397-1400
Under feedback and interference constraints uplink power control in two-tier networks
This paper considers optimum uplink power control policy that maximizes total sum-rate without any interference cancellation techniques under interference and feedback constraints at next generation communication systems. System model has two tier and it is assumed that the feedback channel between these tiers has finite capacity. Second tier users (STU) cause interference on first tier users (FTU) and base station (FTB) while communicating with second tier base station (STB). In proposed scenario, this interference power on first tier network is limited at a certain level. To this end, two different feedback policies are proposed. The first one is determining the K smallest interference channel coefficients of STUs by FTU and sending them to STB. The other policy is that STB requests the interference channel information of K users that have the best direct channel state from FTB. Due to proposed scenario is not a convex problem, it is solved with DC programming well-studied in literature before and performances of proposed feedback policies are compared.
- 1 May 2016
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1101-1104
Energy efficient power control and radio resource management in multi-connectivity framework
In this paper, CoMP (Coordinated Multi-Point Transmission and Reception) technique is studied to mitigate interference effects in cellular networks in which distributed antenna systems (DAS) are utilized. Power control and resource allocation problem is jointly optimized in a multi-user, multi-carrier downlink scenario where backhaul between base station and remote radio heads (antenna) are assumed lossless. Energy efficient radio resource management (RRM) algorithms are produced offering (sub)optimum solutions in a multi-connectivity framework providing user equipments connecting multiple access points simultaneously.
- 1 May 2016
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1101-1104
Energy efficient power control and radio resource management in multi-connectivity framework
In this paper, CoMP (Coordinated Multi-Point Transmission and Reception) technique is studied to mitigate interference effects in cellular networks in which distributed antenna systems (DAS) are utilized. Power control and resource allocation problem is jointly optimized in a multi-user, multi-carrier downlink scenario where backhaul between base station and remote radio heads (antenna) are assumed lossless. Energy efficient radio resource management (RRM) algorithms are produced offering (sub)optimum solutions in a multi-connectivity framework providing user equipments connecting multiple access points simultaneously.
- 1 September 2014
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 872-876
Energy efficient radio resource management in a coordinated multi-cell distributed antenna system
As well as the demand for higher data rates goes on, the rising energy costs and environmental concerns have also led researchers to increase energy efficiency in terms of bits-per-Joule. Cooperative communications with low power nodes, switching off under-utilized cells due to low traffic load and energy efficient radio resource management are some of the energy saving methods. It is observed that the conventional energy efficiency expression, which is defined as the ratio of the data rate to the total transmission power, can limit the system throughput significantly. In this paper, we introduce a novel energy efficiency expression which provides a trade-off between sum-rate maximization and total transmission power minimization in the network. A coordinated multi-cell distributed antenna system is considered and two energy efficient radio resource management schemes are investigated; either ports can be switched on and off or their transmission power can be adjusted in order to maximize energy efficiency. It is demonstrated that the proposed expression offers significant increase in data rate while keeping total transmission power low. The proposed and the traditional energy efficiency methods asymptotically converge when tradeoff effect diminishes, i.e., transmission power minimization takes the full priority.
- 1 September 2014
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 872-876
Energy efficient radio resource management in a coordinated multi-cell distributed antenna system
As well as the demand for higher data rates goes on, the rising energy costs and environmental concerns have also led researchers to increase energy efficiency in terms of bits-per-Joule. Cooperative communications with low power nodes, switching off under-utilized cells due to low traffic load and energy efficient radio resource management are some of the energy saving methods. It is observed that the conventional energy efficiency expression, which is defined as the ratio of the data rate to the total transmission power, can limit the system throughput significantly. In this paper, we introduce a novel energy efficiency expression which provides a trade-off between sum-rate maximization and total transmission power minimization in the network. A coordinated multi-cell distributed antenna system is considered and two energy efficient radio resource management schemes are investigated; either ports can be switched on and off or their transmission power can be adjusted in order to maximize energy efficiency. It is demonstrated that the proposed expression offers significant increase in data rate while keeping total transmission power low. The proposed and the traditional energy efficiency methods asymptotically converge when tradeoff effect diminishes, i.e., transmission power minimization takes the full priority.
- 1 June 2013
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-5
Radio Resource Management in a Coordinated Cellular Distributed Antenna System by Using Particle Swarm Optimization
In this paper, we consider a coordinated multi-point transmission (CoMP) scheme used in a cellular system where antenna ports are distributed throughout the cell, instead of using a single base station. Two schemes are considered; either ports can be switched on and off (Binary Power Management, BPM) or their transmission power can be adjusted (Continuous Power Management, CPM). The goal is to maximize the minimum signal to interference plus noise ratio (SINR) in the network for both schemes. The first problem is NP-hard and the second one is multi- modal. We propose to use particle swarm optimization (PSO) as a solver for both problems. It is demonstrated that the proposed PSO based algorithms can efficiently solve both problems. Furthermore, through simulations, it is shown that for the same total transmit power per port, CPM outperforms BPM.
- 1 June 2013
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-5
Radio Resource Management in a Coordinated Cellular Distributed Antenna System by Using Particle Swarm Optimization
In this paper, we consider a coordinated multi-point transmission (CoMP) scheme used in a cellular system where antenna ports are distributed throughout the cell, instead of using a single base station. Two schemes are considered; either ports can be switched on and off (Binary Power Management, BPM) or their transmission power can be adjusted (Continuous Power Management, CPM). The goal is to maximize the minimum signal to interference plus noise ratio (SINR) in the network for both schemes. The first problem is NP-hard and the second one is multi- modal. We propose to use particle swarm optimization (PSO) as a solver for both problems. It is demonstrated that the proposed PSO based algorithms can efficiently solve both problems. Furthermore, through simulations, it is shown that for the same total transmit power per port, CPM outperforms BPM.
- 1 April 2011
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1036-1039
Performance analysis of correlated parasitic MIMO
This paper presents the bit error probability performance, in a Rayleigh fading channel, of a 3×3 multiple input multiple output (MIMO) system in which only one of the transmitter antennas is fed, whereas the others are used as parasitic elements. The transmit power, which feeds only one of the transmit antennas, is used more efficiently than the traditional MIMO systems. The correlation between the transmit antennas is expressed in terms of the mutual empedances between the antennas. The signals received by the receive antennas are assumed to be uncorrelated and combined using maximal ratio combining. Effects of reactive load empedances connected to the parasitic antennas and of the distance between antennas are analysed in comparison with the traditional MIMO systems.
- 1 April 2011
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1036-1039
Performance analysis of correlated parasitic MIMO
This paper presents the bit error probability performance, in a Rayleigh fading channel, of a 3×3 multiple input multiple output (MIMO) system in which only one of the transmitter antennas is fed, whereas the others are used as parasitic elements. The transmit power, which feeds only one of the transmit antennas, is used more efficiently than the traditional MIMO systems. The correlation between the transmit antennas is expressed in terms of the mutual empedances between the antennas. The signals received by the receive antennas are assumed to be uncorrelated and combined using maximal ratio combining. Effects of reactive load empedances connected to the parasitic antennas and of the distance between antennas are analysed in comparison with the traditional MIMO systems.