BTBashkim Thaçi

Bashkim Thaçi

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Bashkim Thaçi has a total of 21 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Indirect Grafting of Alkyl Ammonium Ions onto Glassy Carbon and Coal Surface. Enhancing the Performance of Heterogeneous Asymmetric Membranes

    by Gentiana Hasani, Fetah I. Podvorica, Jean Pinson, Philippe Decorse, Bashkim S. Thaçi, Salih T. Gashi

    Glassy carbon (GC) and lignite coal powder surfaces are functionalized—either electrochemically or chemically—with alkylammonium groups. The modified coal powder is then embedded within cellulose acetate asymmetric membranes. The surface functionalization process involves the reduction of 2,6‐dimethylbenzene diazonium salt (2,6‐DMBD), which generates the 2,6‐dimethylphenyl radical. Owing to steric hindrance, this radical does not react directly with the surface; instead, it undergoes a radical crossover reaction with brominated alkylammonium salts, generating alkylammonium radicals that subsequently graft onto GC and coal surfaces. In contrast, the reduction of 4‐nitro‐ and 3,5‐dicarboxybenzenediazonium salts produces aryl radicals that bind directly to the coal surface while simultaneously generating alkylammonium radicals. This dual mechanism enables the formation of mixed alkylammonium–aryl layers. On GC, the modification yields a surface layer of alkylammonium groups, as confirmed by cyclic voltammetry using redox probes and by X‐ray photoelectron spectroscopy (XPS), particularly through the N 1s signal, which attests to the presence of alkylammonium groups. When coal modified with alkylammonium ions—either alone or in combination with aryl groups—is incorporated into heterogeneous asymmetric membranes, the resulting membranes exhibit enhanced productivity, product flux, and solute separation compared to both unmodified membranes and those modified without ammonium groups.

  • An investigation into the equilibrium, isotherm,and thermodynamic characteristics of Mn(II) ion biosorption using pine cones

    by Bashkim Thaçi, Gentiana Hasani-Bekteshi, Albana Veseli, Arta Dylhasi

    It is now evident that the utilization of agricultural waste materials represents one of the most effective approaches for the remediation of heavy metal-contaminated water. In this study, Kosovo pine cones were used as a natural, low-cost biosorbent to remove Mn(II) ions from aqueous solutions. Scanning electron microscopy (SEM) and Fourier transform infrared spectroscopy (FTIR) were used to characterize the biosorbent before and after Mn(II) treatment. The observed peak shifts after Mn(II) biosorption suggest interactions between manganese ions and functional groups, particularly hydroxyl and amino groups, rather than carboxyl and carbonyl groups. The main parameters affecting the biosorption process, such as pH, biosorbent dose, initial solvent concentration, contact time, and temperature, were investigated to determine optimal conditions. The efficiency of manganese biosorption was strongly influenced by the pH of the aqueous solution, with optimal removal typically observed at a neutral pH of approximately 7. Isotherm parameters corresponding to the Langmuir and the Freundlich models were derived from the experimental data. The Langmuir isotherm model (R2 0.997) provided the best fit to the equilibrium data, with a maximum biosorption capacity of 36.90 mg/g at 288 K. Thermodynamic parameters (ΔHo, ΔSo, and ΔGo) were determined, indicating that the biosorption process is exothermic, favorable, and spontaneous. The study confirms that pine cones are an efficient biomaterial for the treatment of Mn(II)-contaminated water

  • Open Access

    Study of lignite as the raw material for adsorption of Pb(II) and Cd(II) ions from aqueous solution

    by Bashkim Thaçi, Salih Gashi, Fetah Podvorica, Flamur Sopaj, Gentiana Hasani, Albana Veseli, Alexander Prado-Roller

    The adsorption of two heavy metal ions, lead and cadmium, from an aqueous solution was investigated using Kosovo's lignite as the raw material. The material's properties, including nature, functional groups, surface shape, and charge, were investigated using FTIR, XRD, SEM, and pHPZC techniques. The objective of determining parameters such as initial concentration, pH, contact time, adsorbent dosage, and temperature was to understand how these variables influence adsorption. Under optimal conditions (0.125g/50cm3, 30 mg/dm3, 30 min, 200 rpm, and pH 6), Tthe removal efficiency of Pb(II) was 97.22 %, and 90.04% for Cd(II) under optimal conditions (0.125g/50cm3, 30 mg/dm3, 30 min, 200 rpm, and pH 6). To investigate the achievement of equilibrium between lignite and metal ions, two key isotherm models - s, Langmuir and Freundlich -, were applied. Based on the Langmuir isotherm model, the maximum adsorption capacities for lead and cadmium were 55.55 mg/g and 48.78 mg/g, respectively, at 288 K. The best medium for removing metal ions from lignite (desorption) is was found to be 0.5M HCl. Standard enthalpy change, standard entropy change, and Gibbs free energy indicated that the adsorption of heavy metals with onto lignite is a favorable, exothermic, and spontaneous process and is spontaneous. This investigation study shows that this lignite from Kosovo is highly effective in adsorbing lead and cadmium these two heavy metalsfrom aqueous solutions.

  • Open Access

    Impact of Modified Coal with Alkyl or Mixed Alkyl-Aryl Layer on the Performance of Heterogeneous Cellulose Acetate Membranes

    by Gentiana Hasani, Fetah I. Podvorica, Amor Abdelkader, Salih T. Gashi, Bashkim S. Thaçi

    Heterogeneous cellulose acetate asymmetric reverse osmosis membranes were prepared using coal particles modified with alkyl and mixed alkyl/aryl groups. Aryldiazonium salts and alkyl halides were used as sources of organic radicals that interact with the coal surface to form functional layers. Attenuated Total Reflectance Fourier-Transform Infrared (ATR-FTIR) was employed to confirm the presence of functional layers on the coal surface, while the morphology of membranes was characterized by Scanning Electron Microscopy, SEM. Functionalized coal particles with alkyl and/ or aryl moieties containing different substituents (-COOH, -NO2, -NH2) that have been used to prepare heterogeneous membranes, have shown a noticeable impact in reverse osmosis parameters: permeability and rejection, which were significantly improved in most tested membranes.


  • Hybrid Processes Evaluation of Pb(II) Removal from Wastewater Effluents

    by Bashkim Thaçi, Salih Gashi, Nexhat Daci, Majlinda Daci-Ajvazi

    The hybrid processes potential on Pb(II) removal from wastewater effluents have been investigated. Batch test conditions were carried out to examine the effects of initial metal concentration, adsorbent dose, contact time, temperature and initial solution pH on adsorption of Pb(II) ions from aqueous solution onto wheat bran. The highest adsorption efficiency was observed at solution pH 5, contact time 30 min and temperature 25oC. The adsorption equilibrium data correlate well with both Langmuir and Freundlich isotherms. Thermodynamic studies suggested the spontaneous and exothermic nature of adsorption process. The retentate of power plants wastewater sample pretreated with wheat bran was used as feed for reverse osmosis low-pressure heterogeneous membrane treatment. The high removal efficiency of Pb(II) and co-existed ions from the above wastewater sample was achieved by hybrid processes with high preference for re-use


  • Reverse Osmosis Removal of Heavy Metals from Wastewater Effluents Using Biowaste Materials Pretreatment

    by Bashkim S. Thaçi, Salih T. Gashi

    The objective of this paper was to investigate the applicability of using biowaste materials prior to reverse osmosis treatment of water and wastewater effluents. The physico chemical properties of wheat bran, maize cob, and olive waste, and adsorption parameters such as metal concentration, adsorbent dose, contact time, and temperature of Cd(II) onto wheat bran are presented. The optimal parameters achieved in these experiment were used for sorptive removal of metal ions (Pb2+, Zn2+, Cd2+, Co2+, Mn2+, Ni 2+) from synthetic aqueous solution as well as from wastewater effluents of the mining flotation process. At short pretreatment time, retentate of sufficient concentration was achieved with above biosorbents for further treatment. It is used as feed for reverse osmosis tests. The high removal efficiency of metal ions from synthetic as well as wastewater samples was obtained with low-pressure heterogeneous asymmetric reverse osmosis membranes almost completely by this process.


  • Open Access

    Membrane and Adsorption Processes for Removing of Organics and Inorganics from Urban Wastewaters

    by Majlinda Daci-Ajvazi, Bashkim Thaçi, Nexhat Daci, Salih Gashi

    Oriental Journal of Chemistry is a peer reviewed quarterly research journal of pure and applied chemistry. It publishes standard research papers in almost all thrust areas of current chemistry of academic and commercial importance. It provides a platform for rapid publication of quality research papers, reviews and chemistry letters. Oriental Journal of Chemistry is abstracted and indexed in almost all reputed National and International agencies.