Azita Asayesh
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Azita Asayesh has a total of 41 co-authors. Here are the top co-authors by number of shared publications:
- Ali Asghar Asgharian Jeddi
Textile Engineering Department, Amirkabir University of Technology (Tehran Polytechnic)
7 shared publications Ali Asghar Asgharian Jeddi
Textile Engineering Department, Amirkabir University of Technology (Tehran Polytechnic), Iran
5 shared publications- Melika Badin Dahesh
Textile Engineering Department, Amirkabir University of Technology (Tehran Polytechnic), Tehran, Iran
4 shared publications Nasrin Hashemi
Department of Textile Engineering, Amirkabir University of Technology, Tehran, Iran
3 shared publicationsReyhane Zadekhast
Department of Textile Engineering, Amirkabir University of Technology (Tehran Polytechnic), Tehran, Iran
3 shared publicationsAli Asghar Asghariyan Jeddi
Department of Textile Engineering, Amirkabir University of Technology, Tehran, Iran
2 shared publications
Latest Publications
- 29 October 2026
- Published by Taylor & Francis in The Journal of the Textile Institute
- p. 1-16
Effect of unit-cell geometry and dimensions on the Poisson’s ratio of purl-based auxetic weft-knitted fabrics
1. Poisson’s ratio is a fundamental mechanical parameter that describes the transverse deformation of a material under uniaxial loading. In conventional materials, Poisson’s ratio is positive, indi...
- 29 October 2026
- Published by Taylor & Francis in The Journal of the Textile Institute
- p. 1-16
Effect of unit-cell geometry and dimensions on the Poisson’s ratio of purl-based auxetic weft-knitted fabrics
1. Poisson’s ratio is a fundamental mechanical parameter that describes the transverse deformation of a material under uniaxial loading. In conventional materials, Poisson’s ratio is positive, indi...
- 29 September 2026
- Published by Springer Nature in Mechanics of Time-Dependent Materials
- Vol. 30 (4) , 77
Cyclic tensile behavior of warp-knitted surgical meshes in view of loading direction
- 29 September 2026
- Published by Springer Nature in Mechanics of Time-Dependent Materials
- Vol. 30 (4) , 77
Cyclic tensile behavior of warp-knitted surgical meshes in view of loading direction
- 7 August 2026
- Published by Taylor & Francis in The Journal of the Textile Institute
- Vol. 117 (11) , 3633-3644
Large deformation mechanics of loop pile structure under compression loading modelled as buckled elastic rod
1. Understanding the mechanics of structural elements under load remains a cornerstone of elasticity and stability theory. Euler’s formulation of rod buckling has long provided a foundation for des...
- 7 August 2026
- Published by Taylor & Francis in The Journal of the Textile Institute
- Vol. 117 (11) , 3633-3644
Large deformation mechanics of loop pile structure under compression loading modelled as buckled elastic rod
1. Understanding the mechanics of structural elements under load remains a cornerstone of elasticity and stability theory. Euler’s formulation of rod buckling has long provided a foundation for des...
- 5 August 2026
- Published by Taylor & Francis in The Journal of the Textile Institute
- Vol. 117 (11) , 3658-3668
Deformation analysis of weft-knitted spacer fabrics under tensile loading: shape ratio vs. Poisson’s ratio
1. Spacer fabrics are 3D textile materials consisting of two distinct fabric layers connected by spacer yarns. Due to their unique 3D construction, spacer fabrics exhibit characteristics that make ...
- 5 August 2026
- Published by Taylor & Francis in The Journal of the Textile Institute
- Vol. 117 (11) , 3658-3668
Deformation analysis of weft-knitted spacer fabrics under tensile loading: shape ratio vs. Poisson’s ratio
1. Spacer fabrics are 3D textile materials consisting of two distinct fabric layers connected by spacer yarns. Due to their unique 3D construction, spacer fabrics exhibit characteristics that make ...
- Open Access
- 21 May 2026
- Published by Springer Nature in Scientific Reports
- Vol. 16 (1)
Linking compression mechanics and pressure redistribution in hybrid support surfaces for pressure ulcer prevention
Pressure ulcers are a major concern for individuals with limited mobility. This study developed six hybrid textile-based support surfaces as low-cost, non-electric alternatives for pressure redistribution. Each surface was constructed by layering cotton pile and spacer fabrics to achieve mechanical gradation and improved body conformity. Compression behavior and interface pressure distribution were systematically analyzed in supine and lateral postures using a proof-of-concept model. To ensure reliability, triplicate measurements were averaged after a 30-second stabilization period. The results demonstrated that higher compression work and elastic modulus were associated with lower peak interface pressures, while greater yield strain increased contact area and enhanced conformity. All investigated hybrid designs showed superior pressure redistribution performance compared to the control surface, effectively mitigating pressure concentration. These findings provide evidence-based design guidelines for affordable, ergonomically optimized support surfaces that can improve safety and quality of life for individuals at risk of pressure ulcers. By linking textile mechanics with clinical performance, this work advances the translation of textile engineering innovations into practical assistive technologies for institutional and home care settings.
- 21 May 2026
- Published by Springer Nature in Scientific Reports
- Vol. 16 (1)
Open AccessLinking compression mechanics and pressure redistribution in hybrid support surfaces for pressure ulcer prevention
Pressure ulcers are a major concern for individuals with limited mobility. This study developed six hybrid textile-based support surfaces as low-cost, non-electric alternatives for pressure redistribution. Each surface was constructed by layering cotton pile and spacer fabrics to achieve mechanical gradation and improved body conformity. Compression behavior and interface pressure distribution were systematically analyzed in supine and lateral postures using a proof-of-concept model. To ensure reliability, triplicate measurements were averaged after a 30-second stabilization period. The results demonstrated that higher compression work and elastic modulus were associated with lower peak interface pressures, while greater yield strain increased contact area and enhanced conformity. All investigated hybrid designs showed superior pressure redistribution performance compared to the control surface, effectively mitigating pressure concentration. These findings provide evidence-based design guidelines for affordable, ergonomically optimized support surfaces that can improve safety and quality of life for individuals at risk of pressure ulcers. By linking textile mechanics with clinical performance, this work advances the translation of textile engineering innovations into practical assistive technologies for institutional and home care settings.
- 7 August 2025
- Published by Taylor & Francis in The Journal of the Textile Institute
- Vol. 117 (5) , 920-932
Effect of surface layer design on the physical properties of weft-knitted spacer fabrics for wound dressing applications
- 7 August 2025
- Published by Taylor & Francis in The Journal of the Textile Institute
- Vol. 117 (5) , 920-932
Effect of surface layer design on the physical properties of weft-knitted spacer fabrics for wound dressing applications
- 11 April 2025
- Published by Springer Nature in Mechanics of Time-Dependent Materials
- Vol. 29 (2) , 1-19
The influence of fabric structure on the static and dynamic compressional performance of weft-knitted spacer fabrics
- 11 April 2025
- Published by Springer Nature in Mechanics of Time-Dependent Materials
- Vol. 29 (2) , 1-19
The influence of fabric structure on the static and dynamic compressional performance of weft-knitted spacer fabrics
- 24 February 2025
- Published by Springer Nature in Mechanics of Time-Dependent Materials
- Vol. 29 (1) , 1-17
Evaluation of the tensile stress relaxation of biaxial warp-knitted fabrics regarding fabric interweaving structure
- 24 February 2025
- Published by Springer Nature in Mechanics of Time-Dependent Materials
- Vol. 29 (1) , 1-17
Evaluation of the tensile stress relaxation of biaxial warp-knitted fabrics regarding fabric interweaving structure
- 18 December 2024
- Published by Springer Nature in Fibers and Polymers
- Vol. 26 (1) , 403-415
The Role of Fabric Structure on the Compressional Stress Relaxation of Weft-Knitted Spacer Fabrics Compared to PU Foam
- 18 December 2024
- Published by Springer Nature in Fibers and Polymers
- Vol. 26 (1) , 403-415
The Role of Fabric Structure on the Compressional Stress Relaxation of Weft-Knitted Spacer Fabrics Compared to PU Foam
- 5 March 2024
- Published by Emerald Publishing in International Journal of Clothing Science and Technology
- Vol. 36 (2) , 287-303
The effect of fabric structure on the pilling and abrasion resistance of interlock weft-knitted fabrics
Purpose: Pilling and abrasion resistance are two of the most important mechanical properties of the fabric that influence the appearance and performance of the fabric, particularly in the case of knitted fabrics. Since, these fabric features are affected by fabric structure the aim of present research is to investigate how utilizing miss stitches and tuck stitches in the fabric structure for design purposes will influence the pilling and abrasion resistance of interlock weft-knitted fabrics.Design/methodology/approach: In this research, interlock fabrics with different number of miss or tuck stitches on successive Wales were produced and pilling performance and abrasion resistance of the fabrics were investigated.Findings: The results revealed that increasing the number of miss/tuck stitches on successive Wales decreases the abrasion resistance and enhances the pilling tendency of the fabric. The presence of miss/tuck stitches on both sides of the fabric improves the abrasion resistance and pilling performance of the fabric compared to fabrics containing these stitches on one side of the fabric. Furthermore, the fabric resistance against abrasion and pilling is higher in fabrics consisting of miss stitches compared to fabrics consisting of tuck stitches.Originality/value: The use of tuck and miss stitches in designing the weft-knitted fabrics is a common method for producing fabrics with variety of knit patterns. Since pilling and abrasion resistance of the fabric influence on its appearance and performance, and none of the previous research studied the pilling and abrasion resistance of interlock-knitted fabrics from the point of presence of tuck and miss stitches on successive Wales of the fabric, this subject has been surveyed in the present research.
- 5 March 2024
- Published by Emerald Publishing in International Journal of Clothing Science and Technology
- Vol. 36 (2) , 287-303
The effect of fabric structure on the pilling and abrasion resistance of interlock weft-knitted fabrics
Purpose: Pilling and abrasion resistance are two of the most important mechanical properties of the fabric that influence the appearance and performance of the fabric, particularly in the case of knitted fabrics. Since, these fabric features are affected by fabric structure the aim of present research is to investigate how utilizing miss stitches and tuck stitches in the fabric structure for design purposes will influence the pilling and abrasion resistance of interlock weft-knitted fabrics.Design/methodology/approach: In this research, interlock fabrics with different number of miss or tuck stitches on successive Wales were produced and pilling performance and abrasion resistance of the fabrics were investigated.Findings: The results revealed that increasing the number of miss/tuck stitches on successive Wales decreases the abrasion resistance and enhances the pilling tendency of the fabric. The presence of miss/tuck stitches on both sides of the fabric improves the abrasion resistance and pilling performance of the fabric compared to fabrics containing these stitches on one side of the fabric. Furthermore, the fabric resistance against abrasion and pilling is higher in fabrics consisting of miss stitches compared to fabrics consisting of tuck stitches.Originality/value: The use of tuck and miss stitches in designing the weft-knitted fabrics is a common method for producing fabrics with variety of knit patterns. Since pilling and abrasion resistance of the fabric influence on its appearance and performance, and none of the previous research studied the pilling and abrasion resistance of interlock-knitted fabrics from the point of presence of tuck and miss stitches on successive Wales of the fabric, this subject has been surveyed in the present research.