JZJilong Zhao

Jilong Zhao

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Jilong Zhao has a total of 20 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Operation Mechanism and Characteristics Evaluation of Axial Flux Reversal Permanent Magnet Machine with Different Magnetization Methods

    by Jilong Zhao, Qing Wang, Wei Hua, Qingfeng Han, Lixuan Wang

    In this paper, a novel axial flux reversal permanent magnet (PM) (AFRPM) machine with different magnetization methods including “NS-SN” (called m1) and “NS-NS” (called m2), which inherits the characteristics of the axial flux PM (AFPM) machine and the flux reversal principle, is designed and investigated. Firstly, the topology and operating principle are analyzed and the structure parameters are obtained. In order to make a fair comparative analysis, the geometric parameters of the AFRPM machine with two magnetization methods are identical. Secondly, the PM magnetomotive force (MMF), rotor permeance and armature reaction MMF models are established and the airgap field modulation principle of the machine with m1 and m2 is researched. Then, the contribution of the harmonic components to the electromagnetic torque is analyzed and summarized, which reveals the difference of torque generation mechanism in the AFRPM machine with m1 and m2. Meanwhile, the machine with m2 exhibits a larger torque. Moreover, the electromagnetic performance of the machine with m1 and m2, including PM flux-linkage, back electromotive force (EMF), torque characteristics and so on, is investigated comparatively. The global multi-objective optimization based on the genetic algorithm is implemented to improve the performance of the machine with m2. Finally, a prototype machine is fabricated to validate the finite element analysis. The results show that the performance of the machine with m1 and m2 is excellent. Moreover, the machine with m2 has larger back-EMF with higher quality, superior torque capability and higher power density, which is identified with the theoretical analysis.

  • Comprehensive Comparison of Stator-PM and Rotor-PM Axial Field PM Machines

    by Jilong Zhao, Qingfeng Han, Qing Wang, Lixuan Wang, Lei Wang

    In this paper, an axial field rotor consequent pole permanent magnet (PM) (AFRCPPM) machine and an axial field flux-switching permanent magnet (AFFSPM) machine are comparatively investigated from comprehensive performance. First, the air gap field modulation principle is analyzed. Second, the torque equations are derived and the torque quality improvement principles are revealed. The influence mechanism of the key structural parameters on the torque quality is analyzed, which reflects the similarities and differences in parameter sensitivity between two machines. The optimization scheme is obtained and carried out. Then, the best design is determined. Finally, the comprehensive performances of two machines with same overall dimensions, material characteristics and operating speed are comparatively researched. The improvement in terms of power/torque density, PM utilization, space utilization, torque quality and overload capacity in the AFRCPPM machine is achieved, while inheriting the merits of the AFFSPM machine. Moreover, the superiority and rationality of the AFRCPPM machine are verified.


  • Multi-Condition Cooperative Control of a Hybrid Excited Axial Switched-Flux Permanent Magnet Generator for Distributed Pumped Storage System

    by Jilong Zhao, Lei Wang, Zhijie He, Yuchen Yao, Qingfeng Han

    This paper presents a multi-condition cooperative control method for the distributed pumped storage system based on a hybrid excited axial switched-flux permanent magnet generator. First, the model of the generator and power electronic converter are established. Then, a cooperative control method, including a grid voltage vector orientation control strategy under power generation condition and a speed partition control scheme under electric working condition, is proposed. The current of the grid-side converter and excitation current are coordinated to meet the power demand of the grid. The wide speed-regulation range and large output torque are achieved by cooperatively regulated the armature and excitation current of the generator. The experiment results show the proposed system has strong load capacity and flexible power-regulation capability under multiple conditions. Meanwhile, the proposed control method is validated.

  • Design and Analysis of a Hybrid Stepping Motor for Aerospace Applications

    by Jilong Zhao, Lixuan Wang, Qingfeng Han, Qing Wang, Xinyi Wu

    Due to small step size, high positioning accuracy and high reliability, the hybrid stepping motor (HSM) is widely used in aerospace. In this paper, a HSM with improved torque density is designed and investigated for solar array drive assembly. Firstly, the topology and operating principle of the HSM are analyzed. The theoretical equation is derived, the comprehensive design principle is studied, the design method is presented, and the structure parameters are obtained. Then, the electromagnetic and temperature performances are analyzed based on the 3-D finite element method (FEM). Secondly, an axial-radial magnetic circuit transformation equivalent method is proposed to improve calculation speed. Then, the main electromagnetic performances based on 2-D and 3-D methods are comparatively analyzed. Finally, a HSM product is experimented. Compared with the 3-D FEM, the calculation efficiency is increased while the accuracy is maintained by the 2-D method, which validate the correctness of the design scheme. Meanwhile, the high reliability and improved torque density are achieved in the HSM.


  • Open Access

    Reducing Torque Ripple Through Innovative Configuration of Permanent Magnet Based on Air Gap Field Modulation Theory in a Novel Axial Flux Reversal Permanent Magnet Machine

    by Jilong Zhao, Qing Wang, Qingfeng Han

    In this paper, a novel axial flux reversal permanent magnet (PM) (AFRPM) machine, which combines the merit of the axial flux PM (AFPM) machine and flux reversal PM machine, is proposed. Meanwhile, according to the characteristics of the machine, a method to reduce the torque ripple is presented and researched. Firstly, the topology and operation principle of the machine are analyzed. The power-size equation is derived and the design scheme is confirmed to obtain the structure parameters of the machine. Then, the general electromagnetic performances are analyzed. Secondly, the magnetomotive force (MMF)-permeance model is established. The air gap flux density harmonic distribution principle is researched from the air gap field modulation perspective. The torque generation mechanism is studied by analyzing the influences of the armature reaction air gap flux density harmonics and no-load air gap flux density harmonics on the electromagnetic torque. Furthermore, in order to reduce the torque ripple, an optimization method using the cos-type PMs, which suppress the harmonic pole pairs that do not contribute to the torque output, is investigated. To simplify the manufacturing process, the segmented sector PMs with different heights and arcs are employed instead of the cos-type PM. The effects of the different numbers of segmented sector PMs on the torque ripple are studied. Finally, the results indicate that the proposed machine exhibits large torque capability and high power/torque density. Meanwhile, the torque ripple is significantly reduced by the optimization method.


  • Design and Analysis of a Novel Six-Phase Axial Switched-Flux Permanent Magnet Machine With Different Winding Configuration

    by Jilong Zhao, Zhuolin Lu, Qingfeng Han, Lixuan Wang, Lei Wang

    In this paper, a novel six-phase axial switched-flux permanent magnet (PM) machine with stator-PM is proposed and designed. The topology and operating principle are analyzed in detail. Two different winding configurations, which are called the symmetric double-three-phase and asymmetric double-three-phase, are presented and studied. The electromagnetic performance of the machine with two winding configurations, including flux-linkage, back electromotive force, inductance, torque characteristics, and so on, is investigated. The behavior of the machine under the healthy and faulty conditions is analyzed and the fault-tolerant performance is researched. The prototype is manufactured and the experimental results are consistent with that of the finite element analysis. The results demonstrate that the performance of the machine with two winding configurations is excellent. The machine with asymmetric double-three-phase winding configuration has high quality PM flux-linkage and back-EMF, low cogging torque and torque ripple, and strong fault-tolerant capability. The machine with symmetric double-three-phase winding configuration has large torque capacity.


  • Design of a Novel Axial Flux Rotor Consequent-Pole Permanent Magnet Machine

    by Jilong Zhao, Xiaowei Quan, Xiangdong Sun, Jie Li, Mingyao Lin

    This paper proposes a novel axial flux rotor consequent-pole permanent magnet (AFRCPPM) machine with improved torque density. The key is to place the PMs between the adjacent rotor teeth with switched-flux feature compared to the stator permanent magnet (PM) dual-stator axial switched-flux PM (DS-ASFPM) machine. This will be able to obtain simple stator structure, high power density and large torque output capability. In the following paper, the topology, operating principle and winding configuration are analyzed in detail. According to the theoretical derivation, the major parameters of the AFRCPPM machine are acquired. Based on 3-D finite-element (FE) method, the electromagnetic performance of the AFRCPPM machine and DS-ASFPM machine is comparatively investigated to evaluate their characteristics. The FE-predicted results indicate that the AFRCPPM machine exhibits simple stator structure, sinusoidal back-EMF and high power/torque density. Moreover, under the same armature current, the AFRCPPM machine has larger output torque compared to the DS-ASFPM machine. Hence, it has a good prospect in electric vehicle (EV) or hybrid EV.


  • Cogging Torque Reduction in Double-Rotor Hybrid Excited Axial Switched-Flux Permanent Magnet Machine

    by Jilong Zhao, Xiaowei Quan, Xiangqian Tong, Mingyao Lin

    In this paper, a novel double-rotor hybrid excited axial switched-flux permanent magnet (DRHE-ASFPM) machine incorporating the advantages of the axial switched-flux permanent magnet (PM) machine and wound field synchronous machine is investigated. Similar to the switched-flux PM machine, there is a large undesired cogging torque in the DRHE-ASFPM machine because of high air-gap density and strong flux-focusing effect. This paper presents and compares three cogging torque reduction techniques in the DRHE-ASFPM machine, including stator/rotor teeth notching, stator slot chamfering, as well as stator slot chamfering and teeth notching (SCTN). The analytical expression of the cogging torque is derived and three methods are analyzed and compared in detail. As verified by 3-D finite element (FE) method, the SCTN technique can effectively reduce the cogging torque extremely, but slightly decrease the output torque under both PM and hybrid excitation modes. Finally, an optimized prototype machine with SCTN structure is manufactured, and the experiment is performed to validate the FE predicted results.


  • Influence of Rotor-Pole Number on Electromagnetic Performance of Novel Double-Rotor Hybrid Excited Axial Switched-Flux Permanent-Magnet Machines for EV/HEV Applications

    by Jilong Zhao, Xiaowei Quan, Xiangdong Sun, Mingyao Lin, Shuangxia Niu

    In this paper, a novel stator-permanent magnet (PM) double-rotor hybrid excited axial switched-flux PM (DRHE-ASFPM) machine with improved torque density and enhanced flux regulation capability is proposed for electrical vehicle (EV) application. The operation principle is introduced and different operating modes including only PM, flux-enhancing and flux-weakening modes are analyzed and compared based on the 2-D finite element analysis (FEA). The influences of different stator/rotor pole combinations on the electromagnetic performance of the DRHE-ASFPM machine, including 6-stator-pole/10-, 11-, 13-, and 14-rotor-pole, are quantitatively compared in terms of the flux-linkage, back-EMF and spectra, air-gap flux density, cogging torque, and flux regulation capability by 3-D FEA. The analysis results demonstrate that the 6/10- and 6/11-pole DRHE-ASFPM machines show higher amplitude of PM flux-linkage and back-EMF. Meanwhile, the 6/11- and 6/13-pole machines display smaller cogging torque. Moreover, the 6/11- pole machine produces more sinusoidal back-EMF and has excellent flux regulation capability as well as torque output capability, which is suitable for wide speed-regulation EV application.


  • Open Access

    Design, Analysis and Model Predictive Control of an Axial Field Switched-Flux Permanent Magnet Machine for Electric Vehicle/Hybrid Electric Vehicle Applications

    by Jilong Zhao, Xiaowei Quan, Mengdie Jing, Mingyao Lin, Nian Li

    In this paper, an axial field switched-flux permanent magnet (AFSFPM) machine with stator-PM, which has a high power/torque density and efficiency feature as well as shorter axial length, is designed, analyzed and controlled. The topology, operating principle and design procedure of the AFSFPM machine are labored and discussed. The electromagnetic performance, including the flux linkage, back-EMF, cogging torque, winding inductance and field-control capability, are studied based on 3-D finite-element analysis (FEA). In order to investigate the operating performance of the machine in the whole speed range, a continuous-control-set model predictive control (MPC) method for the AFSFPM machine is proposed. Based on the stage control targets, the maximum torque per ampere (MTPA) and maximum output power flux-weakening strategies are presented in constant torque and constant power regions, respectively. Finally, a prototype of AFSFPM machine has been manufactured and experimentally evaluated and the results show that the MTPA strategy increases the load capability and the flux-weakening strategy broadens the constant power operation range. Moreover, the anti-load-disturbance capacity and dynamic response performance are improved under the MPC method. As a result, the proposed AFSFPM machine drive system is excellent alternative for electrical vehicles (EVs) or hybrid EVs (HEVs).