Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


William Rolando Miranda Zamora has a total of 47 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Intelligent LabVIEW-Based System for Multivariable Control and Optimization of Osmotic Dehydration

    by José Antonio Sánchez-Chero, Manuel Jesús Sánchez-Chero, William Rolando Miranda-Zamora, Lesly Carolina Flores-Mendoza, Carmen Miroslava Sandoval Palacios, Mario Villegas-Yarlequé

    Osmotic dehydration is a technology of interest for food innovation and preservation, although its behavior depends on multiple variables that complicate conventional control and optimization. The objective was to develop and evaluate an intelligent system based on LabVIEW for the monitoring, multivariable analysis, and optimiza-tion of the osmotic dehydration of fruit matrices. Samples of mango, apple, pineapple, and coconut were evaluated using osmotic media of sugar water and carob syrup, con-sidering operating variables and mass transfer responses: weight loss (WR), water loss (WL), and solids gain (SG). Data acquisition, processing, and visualization were inte-grated using LabVIEW, complemented by response surface analysis. In pineapple, the combination of 50 °Brix and 80 kHz showed the highest WR (31.67%) and WL (39.65%) values, while the highest SG (11.91%) was obtained at 60 °Brix and 37 kHz. The com-parison between fruits revealed differentiated responses depending on the matrix and the osmotic agent. The results support the application of LabVIEW as a platform for the multivariable monitoring and analysis of osmotic dehydration and provide a basis for developing predictive optimization strategies and intelligent control in agri-food processes.

  • Open Access

    Ultrasound Pretreatment Effect on Mass Transfer in Osmotic Dehydration of Mammea Americana

    by Milagros Jackeline Rosales-Ruiz, Manuel Jesus Sanchez-Chero, Lesly Carolina Flores- Mendoza, William Rolando Miranda- Zamora, Jose Antonio Sanchez-Chero, Abraham Guillermo Ygnacio Santa Cruz, Isidora Concepción Zapata Periche, María Emilia Dávalos-Almeyda

    Ultrasound technology has gained increasing attention in the food sector as an effective tool to enhance product quality and process efficiency. In osmotic dehydration (OD), ultrasound acts as a pretreatment that accelerates mass transfer by inducing cavitation and microstructural changes in plant tissues. This study aimed to evaluate the effect of ultrasound pretreatment on mass transfer during the osmotic dehydration of mamey (Mammea americana), a tropical fruit with limited prior research in this context. Fruit samples were exposed to ultrasound frequencies of 28, 37, and 80 kHz for 20 and 30 minutes, followed by osmotic dehydration in 50 °Brix sucrose syrup at 35 ± 1 °C for 120 minutes. Statistical analysis (ANOVA, p < 0.05) showed that both frequency and the frequency–time interaction significantly affected water loss (WL) and weight reduction (WR), while pretreatment time alone was not significant. Treatments at 37 kHz (T2: 20 min and T5: 30 min) achieved the highest mass transfer values, with WR = 31.87%, WL = 40.19%, and solid gain (SG) = 6.08%. In contrast, samples treated at 80 kHz showed reduced dehydration efficiency. These findings demonstrate that applying ultrasound at 37 kHz for 20 minutes optimizes the osmotic dehydration of mamey by enhancing mass transfer efficiency. The results contribute to the understanding of ultrasound-assisted OD processes and support its application as a sustainable process intensification strategy for tropical fruit preservation.

  • Open Access

    Development of a PLC/IoT Control System with Real-Time Concentration Monitoring for the Osmotic Dehydration of Fruits

    by Manuel Sanchez-Chero, William R. Miranda-Zamora, Lesly C. Flores-Mendoza, José Sanchez-Chero

    Osmotic dehydration (OD) is an effective pre-treatment for fruit preservation, but conventional processes often lack precision due to manual control of critical variables. This work reports the design and validation of an automated OD system integrating a programmable logic controller (PLC), human–machine interface (HMI), and IoT-enabled sensors for real-time monitoring of syrup concentration and process temperature. Mango (Mangifera indica) cubes were treated under a 23 factorial design with sucrose concentrations of 45 and 50 °Brix, immersion times of 120 and 180 min, and temperatures of 30 and 40 °C. Validation demonstrated that the IoT hydrometer achieved strong agreement with reference devices (R2 = 0.985, RMSE = 0.36 °Brix), while the PLC-integrated tank sensor also demonstrate improved performance over existing calibrated thermometer (R2 = 0.992, MAE = 0.20 °C). ANOVA indicated that concentration, temperature, and time significantly affected water loss and weight reduction (p < 0.01), with temperature being the dominant factor. Water loss ranged from 18.62% to 39.15% and weight reduction from 9.48% to 34.47%, while maximum solid gain reached 9.31% at 50 °Brix and 40 °C for 180 min, with stabilization consistent with case hardening. Drying kinetics were best described by the Page model (R2 > 0.97). The findings highlight the effectiveness of the system for precise monitoring and optimization of OD processes.


  • Open Access

    Automated System Design and Validation for Osmotic Dehydration in Food Preservation

    by Manuel Sanchez-Chero, William Miranda-Zamora, Lesly Carolina Flores-Mendoza, Jose Sanchez-Chero

    This study presents the design and development of an innovative osmotic dehydrator integrating a Programmable Logic Controller (PLC), Human-Machine Interface (HMI), and IoT sensors dedicated to real-time, automated monitoring and control of syrup concentration—a critical but often overlooked parameter. Additional key process variables such as temperature, recirculation rate, and time are also precisely controlled to optimize the osmotic dehydration process and improve food preservation quality and operational efficiency. Validation included eight treatments combining two sucrose concentrations (45 and 50 °Brix), two temperatures (30 and 40 °C), and two immersion times (120 and 180 minutes). Weight reduction, water loss, and solid gain were measured. The treatment with the highest concentration, temperature, and time showed the greatest mass transfer. Statistical analysis revealed significant effects (p < 0.001) and strong fits (R² = 0.995) for weight and water loss, while solid gain showed moderate fit (R² = 0.772). Kinetic modeling using the Page model best described drying dynamics (R² > 0.97). Results suggest the automated system can improve operational efficiency and product quality. However, practical validation under real conditions is needed to confirm functionality and scalability. This work advances osmotic dehydration technology by combining automation with precise process control, aiming to enhance food processing applications.

  • Open Access

    Osmotic Dehydration Pretreatment with Panela for the Production of Apple Snacks

    by Henry Jesús Quinde-Montero, Manuel Jesus Sanchez-Chero, Lesly Carolina Flores-Mendoza, William Rolando Miranda-Zamora, Jose Antonio Sanchez-Chero, William Vera- Jimenez, Flabio Gutierrez-Segura, Cristhiam Alberto Moscol-Calderon, Lucerito Katherine Ortiz-García

    Osmotic dehydration removes water from fruits using hypertonic solutions, enhancing shelf life and quality. However, little research explores natural sweeteners like panela as osmotic agents in developing nutritious, acceptable apple-based snack products. The objective of this research was to evaluate the effect of osmodehydration pretreatment with panela in development of apple snacks (Malus domestica). The methodology evaluated was through an osmotic dehydration process of apple. Panela syrups were used at concentrations of 45 ºBrix and 50 ºBrix with immersion times of 120 and 180 minutes and followed by drying for 8 hours at 55 ºC. Sensory evaluation was performed with student as participants using five-point hedonic scale. For the previously mentioned data analysis, a completely randomized design (CRD) with a 2x2 factorial setup was employed, whereas a five-point hedonic scale was utilized for the sensory evaluation. Using a 2x2 factorial statistical design, it was possible to determine p-values < 0.05, indicating a significant level of confidence in the effects of concentration and temperature on water loss (WL), weight reduction (WR), and solids gain (SG). Results showed weight loss (WR) which was 30.28% and water losses (WL) of up to 31.87%. On the other hand, the lowest solids gain was 2.60% while the highest was 5.64 Finally, the sensory analysis showed that the samples pretreated with osmodehydration T4 (50 ºBrix–180 min) and T3 (45 ºBrix–180 min) had higher acceptability, likewise the least accepted by the panela were T1, S/T (without treatment) and T2 in descending order.


  • Open Access

    Análisis del valor de pasteurización de puré de camote, mediante simulación numérica y pruebas experimentales

    by Kevin Gustavo Agurto Peña, William Rolando Miranda Zamora, Luis Miguel Vilcherrez Arambulo

    En esta investigación se realizó una simulación numérica del tratamiento térmico y pasteurización de puré de camote, enfocándose en la distribución de calor en diferentes ubicaciones del baño maría (centro, izquierda y derecha). Se identificó que la posición central presentó la mayor velocidad de calentamiento (fh = 47,0521 min). El puré se elaboró a partir de la pulpa del camote y se determinó que el punto más lento en calentarse fue el centro geométrico del recipiente cilíndrico de vidrio. Al comparar los resultados experimentales con la simulación por elementos finitos, se observaron pequeñas discrepancias en los valores del factor de retraso (jh) con una variación de Δ = 0,0235 y del fh con Δ = 0,7 min. Sin embargo, el coeficiente de determinación R² cercano a 1 y un error cuadrático medio de 1,063 °C indicaron una buena precisión en las predicciones. Se encontraron diferencias significativas (p < 0,05) en la posición central, pero no en los laterales. Finalmente, al comparar dos formulaciones T1 (puré puro) y T2 (puré con 0,075% de CMC y 0,075% de almidón de maíz) se identificaron diferencias sensoriales en color, consistencia, aroma y sabor, aunque algunos atributos resultaron similares.

  • Open Access

    Impact of cubic autocatalysis and infinite shear rate characteristics in MHD Carreau fluid over radiated bi-directional sheet; ANN-based computational scheme

    by Adil Darvesh, Luis Jaime Collantes Santisteban, Fethi Mohamed Maiz, Manuel Sánchez-Chero, Hamiden Abd El-Wahed Khalifa, William Rolando Miranda Zamora, Hakim AL Garalleh, William Atalaya-Urrutia


  • Variable chemical process and radiative nonlinear impact on magnetohydrodynamics Cross nanofluid: An approach toward controlling global warming

    by Adil Darvesh, Gilder C. Altamirano, Manuel Sánchez‐Chero, William R. M. Zamora, Franklin G. Campos, Tanveer Sajid, Assad Ayub

    Solar energy is the basic source of renewable energy, and it is being used for controlling global pollution/warming. As the Cross nanofluid is very useful for cooling solar devices, in this paper analysis of the global warming effect is investigated by incorporating the nonlinear thermal radiation over the exponentially extendable surface because it plays a major role related to solar energy absorption of nanofluid. Furthermore, the mathematical modeling of Cross nanofluid involving magnetic effect and diffusion is discussed by using the fact of chemical reaction. Chemical reaction finds astonishing applications in pollution studies, chemical processing equipment, and polymer production. As a result of this study, it is noticed that more magnetized conducting fluid controls the motion of fluids for both cases of shear thinning and shear thickening. Brownian motion parameter Nb affects the rate of the random motion of nanoparticles. Increased Nb temperature also increases due to these random movements of nanoparticles. That is the reason why pollutant nanoparticles spread in air as a result of global warming increase.


  • Open Access

    Activation Energy and Inclination Magnetic Dipole Influences on Carreau Nanofluid Flowing via Cylindrical Channel with an Infinite Shearing Rate

    by Assad Ayub, Tanveer Sajid, Wasim Jamshed, William Rolando Miranda Zamora, Leandro Alonso Vallejos More, Luz Marina Galván Talledo, Nélida Isabel Rodríguez Ortega de Peña, Syed M. Hussain, Muhammad Bilal Hafeez, Marek Krawczuk

    Background: The infinite shear viscosity model of Carreau fluid characterizes the attitude of fluid flow at a very high/very low shear rate. This model has the capacity for interpretation of fluid at both extreme levels, and an inclined magnetic dipole in fluid mechanics has its valuable applications such as magnetic drug engineering, cold treatments to destroy tumors, drug targeting, bio preservation, cryosurgery, astrophysics, reaction kinetics, geophysics, machinery efficiency, sensors, material selection and cosmology. Novelty: This study investigates and interprets the infinite shear rate of Carreau nanofluid over the geometry of a cylindrical channel. The velocity is assumed to be investigated through imposing an inclined magnetic field onto cylindrical geometry. Activation energy is utilized because it helps with chemical reactions and mass transport. Furthermore, the effects of thermophoresis, the binary chemical process and the Brownian movement of nanoparticles are included in this attempt. Formulation: The mathematics of the assumed Carreau model is derived from Cauchy stress tensor, and partial differential equations (PDEs) are obtained. Similarity transformation variables converted these PDEs into a system of ordinary differential equations (ODEs). Passing this system under the bvp4c scheme, we reached at numerical results of this research attempt. Findings : Graphical debate and statistical analysis are launched on the basis of the obtained computed numerical results. The infinite shear rate aspect of Carreau nanofluid gives a lower velocity. The inclined magnetic dipole effect shows a lower velocity but high energy. A positive variation in activation energy amplifies the concentration field.


  • Open Access

    Evaluation of Heat Transfer During Pasteurization of a Puree Based on Undervalued Fruits and By-Products: Numerical Simulation by the Finite Element Method and Experimental Validation

    by Vicente Amirpasha Tirado-Kulieva, William Rolando Miranda-Zamora

    In this study, numerical modeling of conductive heat transfer was performed for the pasteurization of a puree based on undervalued fruits and by-products. First, it was determined that the time constants (τ) of the thermocouples were similar. The heat distribution test defined the lower zone of the retort as the slowest heating zone (SHZ) by showing the highest heating rate index (fh = 29.8841 min). A puree of banana pulp, golden apple pulp and peel, and mango pulp and peel was prepared and packaged in cylindrical glass containers. Ansys 2022 R1 was used to simulate and predict by the finite element method the temperature profiles during pasteurization. The slowest heating point (SHP) was located at the geometric center of the container. Experimental and predicted data had minimal differences in lethality (F-value ≈5 min,), cook value (C-value = 16.73 and 18.76 min), process time (77.35 and 76.46 min) and heating delay factor (jh , 4.59 and 2.42), but not in fh value (44.77 and 61.56 min). R2 values close to 1 were obtained, in addition to a root mean square error (RMSE) of 2.5597 ºC. No significant differences were found (p > 0.05); therefore, the proposed model successfully predicted the behavior of the puree during heat treatment.