Oliver Kester
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Oliver Kester has a total of 50 co-authors. Here are the top co-authors by number of shared publications:
- Olivier Shelbaya
TRIUMF 4004 Wesbrook Mall V6T 2A3 Vancouver BC Canada
7 shared publications - O. Hassan
TRIUMF
4 shared publications - Thomas Planche
TRIUMF 4004 Wesbrook Mall V6T 2A3 Vancouver BC Canada
4 shared publications - Wojciech Fedorko
TRIUMF
4 shared publications - Paul M. Jung
TRIUMF
3 shared publications - Richard Baartman
TRIUMF 1 , Vancouver, British Columbia V6T 2A3
3 shared publications
Latest Publications
- Open Access
- 7 October 2026
- Published by American Physical Society (APS) in Physical Review Accelerators and Beams
- Vol. 29 (10) , 105102
Accelerator tuning via model-coupled optics and Bayesian steering
We present an on-line tuning strategy for the isotope separator and accelerator postaccelerator that presets machine optics with a digital twin and then performs Bayesian optimization for steering during operation with beam. The model computes end-to-end configurations in seconds and interfaces with the control system under device bounds, slew-rate limits, and loss interlocks. We report three experimental case studies demonstrating that decoupling optics from steering yields faster and more reliable convergence than a fully Bayesian optics-plus-steering baseline under identical conditions. Across these cases, the number of iterations required to reach high-transmission solutions was substantially reduced, with final average transmissions in the mid- to high-90% range. By removing optics from the steering optimization, the dimensionality of the parameter space is reduced, convergence becomes more predictable, and operational safeguards are easier to enforce.
- 7 October 2026
- Published by American Physical Society (APS) in Physical Review Accelerators and Beams
- Vol. 29 (10) , 105102
Open AccessAccelerator tuning via model-coupled optics and Bayesian steering
We present an on-line tuning strategy for the isotope separator and accelerator postaccelerator that presets machine optics with a digital twin and then performs Bayesian optimization for steering during operation with beam. The model computes end-to-end configurations in seconds and interfaces with the control system under device bounds, slew-rate limits, and loss interlocks. We report three experimental case studies demonstrating that decoupling optics from steering yields faster and more reliable convergence than a fully Bayesian optics-plus-steering baseline under identical conditions. Across these cases, the number of iterations required to reach high-transmission solutions was substantially reduced, with final average transmissions in the mid- to high-90% range. By removing optics from the steering optimization, the dimensionality of the parameter space is reduced, convergence becomes more predictable, and operational safeguards are easier to enforce.
- Open Access
Operational Accelerator Tuning via Model-Coupled Optics and Bayesian Steering
We present an on-line tuning strategy for the ISAC post-accelerator that pre-sets machine optics with a digital twin and then performs Bayesian optimization for steering under online operation with beam. The model computes end-to-end tunes in seconds and interfaces with the control system under device bounds, slew-rate limits, and loss interlocks. We report three experimental case studies demonstrating that decoupling optics from steering yields faster and more reliable convergence than a fully Bayesian optics-plus-steering baseline under identical conditions. Across these cases, iterations to high transmission tunes are reduced by a factor of 4-6, with final average transmissions in the mid- to high-90% range. By factorizing optics from steering, the dimensionality of the parameter space is reduced, convergence becomes more predictable, and operational safeguards are easier to enforce.
Open AccessOperational Accelerator Tuning via Model-Coupled Optics and Bayesian Steering
We present an on-line tuning strategy for the ISAC post-accelerator that pre-sets machine optics with a digital twin and then performs Bayesian optimization for steering under online operation with beam. The model computes end-to-end tunes in seconds and interfaces with the control system under device bounds, slew-rate limits, and loss interlocks. We report three experimental case studies demonstrating that decoupling optics from steering yields faster and more reliable convergence than a fully Bayesian optics-plus-steering baseline under identical conditions. Across these cases, iterations to high transmission tunes are reduced by a factor of 4-6, with final average transmissions in the mid- to high-90% range. By factorizing optics from steering, the dimensionality of the parameter space is reduced, convergence becomes more predictable, and operational safeguards are easier to enforce.
- 12 February 2026
- Published by Elsevier in Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms
- Vol. 573
Matching optimization for TRIUMF’s rare isotope linac
- 12 February 2026
- Published by Elsevier in Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms
- Vol. 573
Matching optimization for TRIUMF’s rare isotope linac
- Open Access
- 1 July 2025
- Published by IOP Publishing in Journal of Instrumentation
- Vol. 20 (07) , T07005
Strategy for Bayesian optimised Beam Steering at TRIUMF-ISAC's MEBT and HEBT Beamlines
In preparation for operation of multiple Rare Isotope Beams (RIBs) when the Advanced Rare Isotope Laboratory (ARIEL) becomes operational, TRIUMF embarked on a program of advanced beam tuning applications and machine learning tools. The strategy for operationalizing Bayesian optimisation for beam steering purposes is being developed. A previously reported centroid correction algorithm is used to tune accelerated charged particle beams at TRIUMF's ISAC postaccelerator facility. We present findings and results from multiple machine development experiments conducted between October and November 2024, as part of a pivot toward semi-automated machine tuning methods. These findings were instrumental in shaping the tuning strategy for the medium and high energy beam transport (MEBT, HEBT) lines at ISAC, by sequentially optimising sub-sections of the beamlines.
- 1 July 2025
- Published by IOP Publishing in Journal of Instrumentation
- Vol. 20 (07) , T07005
Open AccessStrategy for Bayesian optimised Beam Steering at TRIUMF-ISAC's MEBT and HEBT Beamlines
In preparation for operation of multiple Rare Isotope Beams (RIBs) when the Advanced Rare Isotope Laboratory (ARIEL) becomes operational, TRIUMF embarked on a program of advanced beam tuning applications and machine learning tools. The strategy for operationalizing Bayesian optimisation for beam steering purposes is being developed. A previously reported centroid correction algorithm is used to tune accelerated charged particle beams at TRIUMF's ISAC postaccelerator facility. We present findings and results from multiple machine development experiments conducted between October and November 2024, as part of a pivot toward semi-automated machine tuning methods. These findings were instrumental in shaping the tuning strategy for the medium and high energy beam transport (MEBT, HEBT) lines at ISAC, by sequentially optimising sub-sections of the beamlines.
- Open Access
Bayesian Optimization for Ion Beam Centroid Correction
An activity of the TRIUMF automatic beam tuning program, the Bayesian optimization for Ion Steering, BOIS, method has been developed to perform corrective centroid steering of beams at the TRIUMF ISAC facility. BOIS exclusively controls the steerers for centroid correction after the transverse optics have been set according to theory. The method is fully online, easy to deploy, and has been tested in low energy and postaccelerated beams at ISAC, achieving results comparable to human operators. scaleBOIS and boundBOIS are naive proof of concept solutions to preferably select beam paths with minimal steering. Repeatable and robust automated steering reduces reliance on operator expertise and operational overhead, ensuring reliable beam delivery to the experiments and thereby supporting TRIUMF's scientific mission.
Open AccessBayesian Optimization for Ion Beam Centroid Correction
An activity of the TRIUMF automatic beam tuning program, the Bayesian optimization for Ion Steering, BOIS, method has been developed to perform corrective centroid steering of beams at the TRIUMF ISAC facility. BOIS exclusively controls the steerers for centroid correction after the transverse optics have been set according to theory. The method is fully online, easy to deploy, and has been tested in low energy and postaccelerated beams at ISAC, achieving results comparable to human operators. scaleBOIS and boundBOIS are naive proof of concept solutions to preferably select beam paths with minimal steering. Repeatable and robust automated steering reduces reliance on operator expertise and operational overhead, ensuring reliable beam delivery to the experiments and thereby supporting TRIUMF's scientific mission.
- 1 February 2025
- Published by AIP Publishing in Review of Scientific Instruments
- Vol. 96 (2)
Bayesian optimization for ion beam centroid correction
An activity of the TRIUMF automatic beam tuning program, the Bayesian optimization for Ion Steering (BOIS) method has been developed to perform corrective centroid steering of beams at the TRIUMF ISAC facility. BOIS exclusively controls the steerers for centroid correction after the transverse optics have been set according to theory. The method is fully online, easy to deploy, and has been tested in low energy and post-accelerated beams at ISAC, achieving results comparable to human operators. scaleBOIS and boundBOIS are naïve proof-of-concept solutions to preferably select beam paths with minimal steering. Repeatable and robust automated steering reduces reliance on operator expertise and operational overhead, ensuring reliable beam delivery to the experiments and thereby supporting TRIUMF’s scientific mission.
- 1 February 2025
- Published by AIP Publishing in Review of Scientific Instruments
- Vol. 96 (2)
Bayesian optimization for ion beam centroid correction
An activity of the TRIUMF automatic beam tuning program, the Bayesian optimization for Ion Steering (BOIS) method has been developed to perform corrective centroid steering of beams at the TRIUMF ISAC facility. BOIS exclusively controls the steerers for centroid correction after the transverse optics have been set according to theory. The method is fully online, easy to deploy, and has been tested in low energy and post-accelerated beams at ISAC, achieving results comparable to human operators. scaleBOIS and boundBOIS are naïve proof-of-concept solutions to preferably select beam paths with minimal steering. Repeatable and robust automated steering reduces reliance on operator expertise and operational overhead, ensuring reliable beam delivery to the experiments and thereby supporting TRIUMF’s scientific mission.
- 1 March 2024
- Published by AIP Publishing in Review of Scientific Instruments
- Vol. 95 (3)
Tuning methods for multigap drift tube linacs
Multigap cavities are used extensively in linear accelerators to achieve velocities up to a few percent of the speed of light, driving nuclear physics research around the world. Unlike for single-gap structures, there is no closed-form expression to calculate the output beam parameters from the cavity voltage and phase. To overcome this, we propose to use a method based on the integration of the first and second moments of the beam distribution through the axially symmetric time-dependent fields of the cavity. A beam-based calibration between the model’s electric field scaling and the machine’s rf amplitudes is presented, yielding a fast online energy change method, returning cavity amplitude and phase necessary for a desired output beam energy and energy spread. The method is validated with 23Na6+ beam energy measurements.
- 1 March 2024
- Published by AIP Publishing in Review of Scientific Instruments
- Vol. 95 (3)
Tuning methods for multigap drift tube linacs
Multigap cavities are used extensively in linear accelerators to achieve velocities up to a few percent of the speed of light, driving nuclear physics research around the world. Unlike for single-gap structures, there is no closed-form expression to calculate the output beam parameters from the cavity voltage and phase. To overcome this, we propose to use a method based on the integration of the first and second moments of the beam distribution through the axially symmetric time-dependent fields of the cavity. A beam-based calibration between the model’s electric field scaling and the machine’s rf amplitudes is presented, yielding a fast online energy change method, returning cavity amplitude and phase necessary for a desired output beam energy and energy spread. The method is validated with 23Na6+ beam energy measurements.
- Open Access
- 1 April 2022
- Published by IOP Publishing in Journal of Physics: Conference Series
- Vol. 2244 (1) , 012100
Production of Radioactive Molecular Ions in Radiofrequency Quadrupole Gas-Reaction Cells
Limited types of radioactive molecules (RM) can be made inside hot-cavity targets at ISOL facilities like TRIUMF. However, extreme conditions in these targets present formidable unsolved challenges to efficient production and delivery of RM’s. Here we propose using RFQ gas-reaction cells to produce RM from radioactive ion beams (RIB) by room temperature RIB-gas chemical reactions at eV energies. Two options are possible: (1) using an ion reaction cell (IRC) that is a linear RFQ ion guide and reaction cell used as an ‘on-line ion source’, and (2) using the ARIEL RFQ cooler-buncher (ARQB). RFQ gas-cells are a controllable and efficient method to produce RM from chemical reactants that cannot be used in ISOL targets. This ‘online chemistry’ offers a way to enable groundbreaking Beyond Standard Model (BSM) physics research, using a wide diversity of new rare and exotic RM beams that would be difficult or impossible to produce in hot-cavity targets.
- 1 April 2022
- Published by IOP Publishing in Journal of Physics: Conference Series
- Vol. 2244 (1) , 012100
Open AccessProduction of Radioactive Molecular Ions in Radiofrequency Quadrupole Gas-Reaction Cells
Limited types of radioactive molecules (RM) can be made inside hot-cavity targets at ISOL facilities like TRIUMF. However, extreme conditions in these targets present formidable unsolved challenges to efficient production and delivery of RM’s. Here we propose using RFQ gas-reaction cells to produce RM from radioactive ion beams (RIB) by room temperature RIB-gas chemical reactions at eV energies. Two options are possible: (1) using an ion reaction cell (IRC) that is a linear RFQ ion guide and reaction cell used as an ‘on-line ion source’, and (2) using the ARIEL RFQ cooler-buncher (ARQB). RFQ gas-cells are a controllable and efficient method to produce RM from chemical reactants that cannot be used in ISOL targets. This ‘online chemistry’ offers a way to enable groundbreaking Beyond Standard Model (BSM) physics research, using a wide diversity of new rare and exotic RM beams that would be difficult or impossible to produce in hot-cavity targets.
- Open Access
- 15 January 2020
- Published by American Physical Society (APS) in Physical Review Accelerators and Beams
- Vol. 23 (1) , 013501
Characterization of a plasma window as a membrane free transition between vacuum and high pressure
A plasma window (PW) is a device for separating two areas of different pressures while letting particle beams pass with little to no loss. It has been introduced by A. Hershcovitch [ J. Appl. Phys. 78, 5283 (1995)] In the course of this publication, the properties of a PW with apertures of 3.3 mm and 5.0 mm are presented. Especially the link between the pressure properties relevant for applications in accelerator systems and the underlying plasma properties depending on external parameters are presented. As working gas, a 98%Ar-2% mixture has been used due to the intense Stark broadening of the -line and the well-described Ar characteristics, enabling an accurate electron density and temperature analysis. At the low pressure side around some mbar, high-pressure values reached up to 750 mbar while operating with volume flows between 1 slm and 4 slm (standard liter per minute) and discharge currents ranging from 45 A to 60 A. The achieved ratios between high and low pressure with an active discharge range from 40 to 150. This is an improvement of a factor up to 12 over the performance of an ordinary differential pumping stage of the same geometry. Unique features of the presented PW include simultaneous plasma parameter determination and the absence of ceramic insulators between the cooling plates. Optical analysis reveals no significant damage or wear to the components after an operation time well over 10 h, whereas the cathode needle needs replacement after 5 h.- 15 January 2020
- Published by American Physical Society (APS) in Physical Review Accelerators and Beams
- Vol. 23 (1) , 013501
Open AccessCharacterization of a plasma window as a membrane free transition between vacuum and high pressure
A plasma window (PW) is a device for separating two areas of different pressures while letting particle beams pass with little to no loss. It has been introduced by A. Hershcovitch [ J. Appl. Phys. 78, 5283 (1995)] In the course of this publication, the properties of a PW with apertures of 3.3 mm and 5.0 mm are presented. Especially the link between the pressure properties relevant for applications in accelerator systems and the underlying plasma properties depending on external parameters are presented. As working gas, a 98%Ar-2% mixture has been used due to the intense Stark broadening of the -line and the well-described Ar characteristics, enabling an accurate electron density and temperature analysis. At the low pressure side around some mbar, high-pressure values reached up to 750 mbar while operating with volume flows between 1 slm and 4 slm (standard liter per minute) and discharge currents ranging from 45 A to 60 A. The achieved ratios between high and low pressure with an active discharge range from 40 to 150. This is an improvement of a factor up to 12 over the performance of an ordinary differential pumping stage of the same geometry. Unique features of the presented PW include simultaneous plasma parameter determination and the absence of ceramic insulators between the cooling plates. Optical analysis reveals no significant damage or wear to the components after an operation time well over 10 h, whereas the cathode needle needs replacement after 5 h. - 13 April 2011
- Published by Springer Nature in Hyperfine Interactions
- Vol. 199 (1-3) , 261-267
Status of the EBIT in the ReA3 reaccelerator at NSCL
- 13 April 2011
- Published by Springer Nature in Hyperfine Interactions
- Vol. 199 (1-3) , 261-267
Status of the EBIT in the ReA3 reaccelerator at NSCL