FFFernando Ferreira

Fernando Ferreira

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Fernando Ferreira has a total of 26 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    The Influence of Hydroxyapatite Crystals on the Viscoelastic Behavior of Poly(vinyl alcohol) Braid Systems

    by Tiago Quinaz, Tânia F. Freire, Andrea Olmos, Marcos Martins, Fernando B. N. Ferreira, Marcelo F. S. M. de Moura, Andrea Zille, Quyền Nguyễn, José Xavier, Nuno Dourado

    Composites of poly(vinyl alcohol) (PVA) in the shape of braids, in combination with crystals of hydroxyapatite (HAp), were analyzed to perceive the influence of this bioceramic on both the quasi-static and viscoelastic behavior under tensile loading. Analyses involving energy-dispersive X-ray spectroscopy (EDS) and scanning electron microscopy (SEM) allowed us to conclude that the production of a homogeneous layer of HAp on the braiding surface and the calcium/phosphate atomic ratio were comparable to those of natural bone. The maximum degradation temperature established by thermogravimetric analysis (TGA) showed a modest decrease with the addition of HAp. By adding HAp to PVA braids, an increase in the glass transition temperature (Tg) is noticed, as demonstrated by dynamic mechanical analysis (DMA) and differential thermal analysis (DTA). The PVA/HAp composite braids’ peaks were validated by Fourier transform infrared (FTIR) spectroscopy to be in good agreement with common PVA and HAp patterns. PVA/HAp braids, a solution often used in the textile industry, showed superior overall mechanical characteristics in monotonic tensile tests. Creep and relaxation testing showed that adding HAp to the eight and six-braided yarn architectures was beneficial. By exhibiting good mechanical performance and most likely increased biological qualities that accompany conventional care for bone applications in the fracture healing field, particularly multifragmentary ones, these arrangements can be applied as a fibrous fixation system.


  • Calçar e Manobrar: uma análise das percepções e experiências dos bombeiros portugueses em relação às luvas de combate a incêndios

    by Anna Sophia Piacenza Moraes, Miguel Ângelo Carvalho, Rafaela Seabra Cardoso Leal, Rachel Sager Boldt, Fernando Nunes Ferreira

    Anais do Congresso Brasileiro de Ergonomia da ABERGO (2358-5463) - Calçar E Manobrar: Uma Análise Das Percepções E Experiências Dos Bombeiros Portugueses Em Relação Às Luvas De Combate A Incêndios

  • Open Access

    Polylactic Acid/Carbon Nanoparticle Composite Filaments for Sensing

    by Mariana M. Silva, Paulo E. Lopes, Yilong Li, Petra Pötschke, Fernando N. Ferreira, Maria C. Paiva

    Polylactic acid (PLA) is a bio-based, biodegradable polymer that presents high potential for biomedical and sensing applications. Ongoing works reported in the literature concern mainly applications based on 3D printing, while textile applications are hindered by the limited flexibility of PLA and its composite filaments. In the present work, PLA/multiwall carbon nanotube (MWCNT) composite filaments were produced with enhanced flexibility and electrical conductivity, which may be applied on a textile structure. A biodegradable plasticizer was incorporated in the nanocomposites, aiming at improving MWCNT dispersion and increasing the flexibility of the filaments. Filaments were produced with a range of compositions and their morphology was characterized as well as their thermal, thermomechanical, and electrical properties. Selected compositions were tested for sensing activity using saturated acetone vapor, demonstrating a suitable response and potential for the application in fabrics with sensing capacity.


  • Open Access

    Development of flexible textile aluminium-air battery prototype

    by Aleksandrs Vališevskis, Uģis Briedis, Miguel Carvalho, Fernando Ferreira

    There is one component that virtually any embedded wearable needs—a power source. This paper proposes an energy source, which contains no harmful substances, can be stored in a stand-by dry state for indefinite time period, is flexible and has tactile characteristics similar to that of textile. The main feature of this energy source is the separation of the electrolyte and the electrodes—the electrolyte is applied only when the battery needs to be activated. This makes storage time in a dry state virtually infinite. It expands their potential use to storage solutions and healthcare/health monitoring solutions, because the design of the battery allows it to be used as an active sensor, which generates electric current, when it detects liquid. We stress that this solution is suitable for specific applications only, outlined in the paper. The main components of the battery include aluminium anode, air cathode and the cotton shell. The design includes only textile-based materials, which ensure greater flexibility and better fusion with textile materials, where the battery is intended to be integrated. Besides that, results of the experiments with multi-cell battery prototype are presented.


  • Top Cited Papers
    Open Access

    Activity of Specialized Biomolecules against Gram-Positive and Gram-Negative Bacteria

    by Tânia D. Tavares, Joana C. Antunes, Jorge Padrão, Ana I. Ribeiro, Andrea Zille, M. Teresa P. Amorim, Fernando Ferreira, Helena P. Felgueiras

    The increased resistance of bacteria against conventional pharmaceutical solutions, the antibiotics, has raised serious health concerns. This has stimulated interest in the development of bio-based therapeutics with limited resistance, namely, essential oils (EOs) or antimicrobial peptides (AMPs). This study envisaged the evaluation of the antimicrobial efficacy of selected biomolecules, namely LL37, pexiganan, tea tree oil (TTO), cinnamon leaf oil (CLO) and niaouli oil (NO), against four bacteria commonly associated to nosocomial infections: Staphylococcus aureus, Staphylococcus epidermidis, Escherichia coli and Pseudomonas aeruginosa. The antibiotic vancomycin and silver nanoparticles (AgNPs) were used as control compounds for comparison purposes. The biomolecules were initially screened for their antibacterial efficacy using the agar-diffusion test, followed by the determination of minimal inhibitory concentrations (MICs), kill-time kinetics and the evaluation of the cell morphology upon 24 h exposure. All agents were effective against the selected bacteria. Interestingly, the AgNPs required a higher concentration (4000–1250 μg/mL) to induce the same effects as the AMPs (500–7.8 μg/mL) or EOs (365.2–19.7 μg/mL). Pexiganan and CLO were the most effective biomolecules, requiring lower concentrations to kill both Gram-positive and Gram-negative bacteria (62.5–7.8 μg/mL and 39.3–19.7 μg/mL, respectively), within a short period of time (averaging 2 h 15 min for all bacteria). Most biomolecules apparently disrupted the bacteria membrane stability due to the observed cell morphology deformation and by effecting on the intracellular space. AMPs were observed to induce morphological deformations and cellular content release, while EOs were seen to split and completely envelope bacteria. Data unraveled more of the potential of these new biomolecules as replacements for the conventional antibiotics and allowed us to take a step forward in the understanding of their mechanisms of action against infection-related bacteria.


  • Open Access

    Biofunctionalization of Natural Fiber-Reinforced Biocomposites for Biomedical Applications

    by Tânia D. Tavares, Joana C. Antunes, Fernando Ferreira, Helena P. Felgueiras

    In the last ten years, environmental consciousness has increased worldwide, leading to the development of eco-friendly materials to replace synthetic ones. Natural fibers are extracted from renewable resources at low cost. Their combination with synthetic polymers as reinforcement materials has been an important step forward in that direction. The sustainability and excellent physical and biological (e.g., biocompatibility, antimicrobial activity) properties of these biocomposites have extended their application to the biomedical field. This paper offers a detailed overview of the extraction and separation processes applied to natural fibers and their posterior chemical and physical modifications for biocomposite fabrication. Because of the requirements for biomedical device production, specialized biomolecules are currently being incorporated onto these biocomposites. From antibiotics to peptides and plant extracts, to name a few, this review explores their impact on the final biocomposite product, in light of their individual or combined effect, and analyzes the most recurrent strategies for biomolecule immobilization.