Siwen Bi
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Siwen Bi has a total of 52 co-authors. Here are the top co-authors by number of shared publications:
Zitong Shen
3 shared publicationsJiahui Cai
Hubei Provincial Key Laboratory of Green Materials for Light Industry, Hubei University of Technology, Wuhan, Hubei 430068, China
2 shared publicationsJiaqi Bian
Hubei Provincial Key Laboratory of Green Materials for Light Industry Hubei University of Technology Wuhan Hubei People's Republic of China
2 shared publications- Jiaqi Bian2 shared publications
Jiashang Chen
Hubei Provincial Key Laboratory of Green Materials for Light Industry Hubei University of Technology Wuhan Hubei People's Republic of China
2 shared publications- Margaret Sobkowicz-Kline
Department of Plastics Engineering, University of Massachusetts Lowell, Lowell, USA
2 shared publications
Latest Publications
- Open Access
- 8 September 2026
- Published by Elsevier in SSRN Electronic Journal
Fluorine-Terminated Polyester-Based Solid-State Electrolytes: Effects of End-Groups on Ion Transport and Salt Dissociation
Fluorination has emerged as a key modification strategy for solid polymer electrolytes, serving to enhance their electrochemical stability. Despite this, there is a notable lack of systematic studies examining the role of fluorine end groups in regulating salt solvation and ion transport behavior. In this work, hydroxyl-terminated and fluorine-terminated poly(hexamethylene succinate) (PHS-OH and PHS-F) were synthesized with a 36% fluorine end-capping ratio, and blended with bis(trifluoromethane)-sulfonimide lithium salt (LiTFSI). Differential scanning calorimetry (DSC) results revealed that fluorine end groups raise the glass transition temperature and alter crystallization behavior. PHS-OH achieved a room-temperature conductivity of 10⁻⁵ S cm⁻¹ with an activation energy of 34.54 kJ mol⁻¹, outperforming PHS-F of 10⁻⁶ S cm⁻¹ and 64.60 kJ mol⁻¹. Raman spectra showed PHS-F contained only 34.51% solvent-separated ion pairs(SSIP), while PHS-OH achieved 48.35% SSIP. It indicated the lower dissociation capability of PHS-F. These findings reveal end-group electronic effects modulate solvation structure and segmental dynamics, offering guidance for molecular design of fluorinated polymer electrolytes.
- 8 September 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessFluorine-Terminated Polyester-Based Solid-State Electrolytes: Effects of End-Groups on Ion Transport and Salt Dissociation
Fluorination has emerged as a key modification strategy for solid polymer electrolytes, serving to enhance their electrochemical stability. Despite this, there is a notable lack of systematic studies examining the role of fluorine end groups in regulating salt solvation and ion transport behavior. In this work, hydroxyl-terminated and fluorine-terminated poly(hexamethylene succinate) (PHS-OH and PHS-F) were synthesized with a 36% fluorine end-capping ratio, and blended with bis(trifluoromethane)-sulfonimide lithium salt (LiTFSI). Differential scanning calorimetry (DSC) results revealed that fluorine end groups raise the glass transition temperature and alter crystallization behavior. PHS-OH achieved a room-temperature conductivity of 10⁻⁵ S cm⁻¹ with an activation energy of 34.54 kJ mol⁻¹, outperforming PHS-F of 10⁻⁶ S cm⁻¹ and 64.60 kJ mol⁻¹. Raman spectra showed PHS-F contained only 34.51% solvent-separated ion pairs(SSIP), while PHS-OH achieved 48.35% SSIP. It indicated the lower dissociation capability of PHS-F. These findings reveal end-group electronic effects modulate solvation structure and segmental dynamics, offering guidance for molecular design of fluorinated polymer electrolytes.
- 1 May 2026
- Published by Wiley in Polymer Engineering & Science
- Vol. 66 (7) , 5055-5066
Surface Grafting of Cellulose Nanocrystals Affects Interfacial Interaction and Crystallization of Polycaprolactone
Polycaprolactone (PCL) has a lower mechanical modulus than other biodegradable polymers, which restricts its applications. In this work, 2,2,6,6‐tetramethyl‐1‐piperidinyl (TEMPO)‐oxidized cellulose nanocrystals (TONC) were modified by long‐chain PCL diols to prepare grafted nanocellulose (TONC‐g) and blended with PCL via a micro‐compounder. DSC, XRD, and POM were used to characterize the thermal and crystalline properties of PCL/cellulose nanocrystals (CNC), PCL/TONC, and PCL/TONC‐g biocomposites, while an interfacial rheometer was utilized to examine the interfacial tension of three cellulose nanocrystal aqueous dispersions with PCL chloroform solution. Polarized light micrographs demonstrated that both modified and unmodified CNC could induce rapid crystallization of the polyester matrix, and isothermal crystallization kinetic analysis revealed that CNC could significantly decrease the half‐crystallization time of PCL, with PCL/TONC‐g exhibiting the shortest half‐crystallization time. Interfacial analysis confirmed that grafting PCL‐diol onto TONC‐g improved their compatibility with the PCL matrix. Pendant drop tensiometry measured an interfacial tension of only 12.4 mN m −1 for TONC‐g against 100 mg mL −1 PCL, which is substantially lower than that of unmodified CNC or TONC. This improved affinity, further supported by Gibbs adsorption analysis, is attributed to the grafted PCL‐diol chains, which act as an efficient compatibilizer at the interface.
- 1 May 2026
- Published by Wiley in Polymer Engineering & Science
- Vol. 66 (7) , 5055-5066
Surface Grafting of Cellulose Nanocrystals Affects Interfacial Interaction and Crystallization of Polycaprolactone
Polycaprolactone (PCL) has a lower mechanical modulus than other biodegradable polymers, which restricts its applications. In this work, 2,2,6,6‐tetramethyl‐1‐piperidinyl (TEMPO)‐oxidized cellulose nanocrystals (TONC) were modified by long‐chain PCL diols to prepare grafted nanocellulose (TONC‐g) and blended with PCL via a micro‐compounder. DSC, XRD, and POM were used to characterize the thermal and crystalline properties of PCL/cellulose nanocrystals (CNC), PCL/TONC, and PCL/TONC‐g biocomposites, while an interfacial rheometer was utilized to examine the interfacial tension of three cellulose nanocrystal aqueous dispersions with PCL chloroform solution. Polarized light micrographs demonstrated that both modified and unmodified CNC could induce rapid crystallization of the polyester matrix, and isothermal crystallization kinetic analysis revealed that CNC could significantly decrease the half‐crystallization time of PCL, with PCL/TONC‐g exhibiting the shortest half‐crystallization time. Interfacial analysis confirmed that grafting PCL‐diol onto TONC‐g improved their compatibility with the PCL matrix. Pendant drop tensiometry measured an interfacial tension of only 12.4 mN m −1 for TONC‐g against 100 mg mL −1 PCL, which is substantially lower than that of unmodified CNC or TONC. This improved affinity, further supported by Gibbs adsorption analysis, is attributed to the grafted PCL‐diol chains, which act as an efficient compatibilizer at the interface.
- 16 June 2025
- Published by Wiley in Polymer Engineering & Science
- Vol. 65 (9) , 4707-4716
Three‐Armed Polycaprolactone‐Based Polyurethane for High‐Performance Composite Solid‐State Electrolytes
To mitigate the aggregation of inorganic fillers in composite solid electrolytes, we synthesized a three‐armed polyester polyurethane oligomer (TAPU) through a two‐step polymerization. The curing degree of TAPU was quantitatively analyzed based on the infrared absorption of isocyanate groups, and the curing kinetics were investigated and integrated with the crystalline properties of the cured TAPU. TAPU had a strong solvation ability for lithium salt, and the ionic conductivity of the electrolyte reached 1.48 × 10 −4 S cm −1 at room temperature, which is much higher than that of linear polycaprolactone electrolytes. The LLZTO particles modified with TAPU exhibited enhanced dispersion stability in the composite electrolyte system, effectively suppressing nanoparticle aggregation and improving interfacial compatibility between the ceramic fillers and polymer matrix. The Li//5% LLZTO‐TAPU//Li coin cells were prepared by in situ curing and had excellent cycle stability of up to 768 h at 50°C, which was five times higher than that of PCL electrolytes. Compared with linear polymer solid electrolytes, nonlinear topological polymer provided more functional groups for high ion conduction and cycling stability in lithium batteries.
- 16 June 2025
- Published by Wiley in Polymer Engineering & Science
- Vol. 65 (9) , 4707-4716
Three‐Armed Polycaprolactone‐Based Polyurethane for High‐Performance Composite Solid‐State Electrolytes
To mitigate the aggregation of inorganic fillers in composite solid electrolytes, we synthesized a three‐armed polyester polyurethane oligomer (TAPU) through a two‐step polymerization. The curing degree of TAPU was quantitatively analyzed based on the infrared absorption of isocyanate groups, and the curing kinetics were investigated and integrated with the crystalline properties of the cured TAPU. TAPU had a strong solvation ability for lithium salt, and the ionic conductivity of the electrolyte reached 1.48 × 10 −4 S cm −1 at room temperature, which is much higher than that of linear polycaprolactone electrolytes. The LLZTO particles modified with TAPU exhibited enhanced dispersion stability in the composite electrolyte system, effectively suppressing nanoparticle aggregation and improving interfacial compatibility between the ceramic fillers and polymer matrix. The Li//5% LLZTO‐TAPU//Li coin cells were prepared by in situ curing and had excellent cycle stability of up to 768 h at 50°C, which was five times higher than that of PCL electrolytes. Compared with linear polymer solid electrolytes, nonlinear topological polymer provided more functional groups for high ion conduction and cycling stability in lithium batteries.
- 5 June 2025
- Published by Elsevier in Materials Letters
- Vol. 398
Effect of molecular weight and end groups on ionic conductivity of polyester‑based solid‐state electrolytes
- 5 June 2025
- Published by Elsevier in Materials Letters
- Vol. 398
Effect of molecular weight and end groups on ionic conductivity of polyester‑based solid‐state electrolytes
- 17 March 2025
- Published by American Chemical Society (ACS) in ACS Applied Polymer Materials
- Vol. 7 (6) , 3945-3953
Synergistic Inherent and Dynamic Cross-Links for Self-Healable Polydimethylsiloxane Elastomer Foams
- 17 March 2025
- Published by American Chemical Society (ACS) in ACS Applied Polymer Materials
- Vol. 7 (6) , 3945-3953
Synergistic Inherent and Dynamic Cross-Links for Self-Healable Polydimethylsiloxane Elastomer Foams
- 6 May 2024
- Published by American Chemical Society (ACS) in Macromolecules
- Vol. 57 (9) , 4460-4470
Effect of LiTFSI Solvation on Ionic Conductivity of Polyester-Based Solid Electrolytes
- 6 May 2024
- Published by American Chemical Society (ACS) in Macromolecules
- Vol. 57 (9) , 4460-4470
Effect of LiTFSI Solvation on Ionic Conductivity of Polyester-Based Solid Electrolytes
- 18 August 2023
- Published by Elsevier in Carbohydrate Polymers
- Vol. 322, 121312
Protein modified cellulose nanocrystals on reinforcement and self-driven biodegradation of aliphatic polyester
- 18 August 2023
- Published by Elsevier in Carbohydrate Polymers
- Vol. 322, 121312
Protein modified cellulose nanocrystals on reinforcement and self-driven biodegradation of aliphatic polyester
- 1 April 2021
- Published by Elsevier in Journal of Cleaner Production
- Vol. 294
Biodegradable polyester coated mulch paper for controlled release of fertilizer
- 1 April 2021
- Published by Elsevier in Journal of Cleaner Production
- Vol. 294
Biodegradable polyester coated mulch paper for controlled release of fertilizer
- 1 September 2018
- Published by Elsevier in Polymer Degradation and Stability
- Vol. 155, 9-14
Enzymatic degradation of poly (butylene succinate-co-hexamethylene succinate)
- 1 September 2018
- Published by Elsevier in Polymer Degradation and Stability
- Vol. 155, 9-14
Enzymatic degradation of poly (butylene succinate-co-hexamethylene succinate)
- 20 April 2016
- Published by SPIE-Intl Soc Optical Eng
- Vol. 9803, 98031U-98031U-7
Ultrasound generation from an optical fiber sidewall
- 20 April 2016
- Published by SPIE-Intl Soc Optical Eng
- Vol. 9803, 98031U-98031U-7
Ultrasound generation from an optical fiber sidewall