Kenji Nomura
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Kenji Nomura has a total of 117 co-authors. Here are the top co-authors by number of shared publications:
- Chi-Hsin Huang
Department of Electrical and Computer Engineering
13 shared publications Yalun Tang
Department of Electrical and Computer Engineering, University of California San Diego 1 , 9500 Gilman Drive, La Jolla, California 92093
7 shared publications- Hideo Hosono
Institute of Science Tokyo
6 shared publications - Kosuke Matsuzaki
Materials Research Center for Element Strategy, Tokyo Institute of Technology, 4259 Nagatsuta-cho, Midori-ku, Yokohama 226-8503, Japan
6 shared publications - Yong Zhang
Department of Electrical and Computer Engineering, University of California San Diego , 9500 Gilman Dr., La Jolla, California 92093
6 shared publications - Yu-Lun Chueh
National Tsing Hua University
4 shared publications
Latest Publications
Solution Processed Tellurium Single‐Crystal Nanocubes and Polycrystalline Films for 2 µm Wavelength Infrared Photodetection
Tellurium (Te) is a p‐type semiconductor with a narrow bandgap, promising for infrared optoelectronics. This work presents a solution‐based synthesis of novel single‐crystal Te nanocubes and polycrystalline films. Te is dissolved in ethylenediamine‐ethanethiol, mixed with ethanolamine, and spin‐coated to form nanocrystals and films. We achieved monodispersed single‐crystal Te nanocubes ∼500–900 nm in size, confirmed by electron microscopy and diffraction. The crystal morphology can be tuned by the annealing temperature and air exposure time. We show patterning of Te nanocubes by exploiting the deposition dependence on the substrate's wetting properties. We also demonstrate ∼500 nm thick polycrystalline Te films processed in air at 150°C. The Te films exhibit p‐type behavior, an electrical resistivity of 0.115 Ω·cm, and photoconductance at wavelengths up to 2100 nm without optical cavities or complex gain mechanisms. The films exhibit responsivities of 0.93 A W − 1 at 1720 nm and 137 mA W − 1 at 2100 nm under intensities of 0.98 and 6.4 mW/cm 2 , respectively. The large dark current remains a limitation for the current photoconductor configuration, but device engineering can improve speed and ON/OFF ratio. Overall, this low‐temperature method provides an alternative, cost‐effective pathway for Te‐based infrared optoelectronics beyond the operating ranges of Si, Ge, and conventional InGaAs.
Solution Processed Tellurium Single‐Crystal Nanocubes and Polycrystalline Films for 2 µm Wavelength Infrared Photodetection
Tellurium (Te) is a p‐type semiconductor with a narrow bandgap, promising for infrared optoelectronics. This work presents a solution‐based synthesis of novel single‐crystal Te nanocubes and polycrystalline films. Te is dissolved in ethylenediamine‐ethanethiol, mixed with ethanolamine, and spin‐coated to form nanocrystals and films. We achieved monodispersed single‐crystal Te nanocubes ∼500–900 nm in size, confirmed by electron microscopy and diffraction. The crystal morphology can be tuned by the annealing temperature and air exposure time. We show patterning of Te nanocubes by exploiting the deposition dependence on the substrate's wetting properties. We also demonstrate ∼500 nm thick polycrystalline Te films processed in air at 150°C. The Te films exhibit p‐type behavior, an electrical resistivity of 0.115 Ω·cm, and photoconductance at wavelengths up to 2100 nm without optical cavities or complex gain mechanisms. The films exhibit responsivities of 0.93 A W − 1 at 1720 nm and 137 mA W − 1 at 2100 nm under intensities of 0.98 and 6.4 mW/cm 2 , respectively. The large dark current remains a limitation for the current photoconductor configuration, but device engineering can improve speed and ON/OFF ratio. Overall, this low‐temperature method provides an alternative, cost‐effective pathway for Te‐based infrared optoelectronics beyond the operating ranges of Si, Ge, and conventional InGaAs.
- 8 September 2026
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 148 (37) , 40053-40064
Engineering a Fast Li + -Diffusion Secondary Phase in Sn Anodes for Low-Pressure All-Solid-State Batteries
Alloys are promising anode candidates for all-solid-state batteries (ASSBs) due to their high specific capacities and regulated interphase with the nonflowing solid-state electrolytes (SSEs). However, selection of alloys is constrained by low initial Coulombic efficiency (ICE), which often excludes candidates with high specific capacity and mechanical deformability─parameters essential for high energy density and low-stack pressure operation. In this work, we reassess and unlock the potential of tin (Sn) anodes in ASSBs. By incorporating bismuth (Bi) as a secondary element, we developed low-cost, diffusion-engineered Sn–Bi binary elemental anodes achieving a high ICE (∼90%) and specific capacity (∼700 mAh g–1). Electrochemical characterizations, first-principles calculations, and cross-sectional morphologies reveal that Li3Bi exhibits a significantly higher Li diffusion coefficient (3.5 × 10–6 cm2 s–1) compared to LiSn and Li13Sn5 (1.5 × 10–14 and 1.3 × 10–11 cm2 s–1, respectively), remains stable in a larger voltage window, and facilitates diffusion throughout the electrode for reversible Sn (de)lithiation. Sn–Bi full cells coupled with a LiNi0.82Co0.11Mn0.07O2 (NCM82) cathode demonstrate high rate capability (1 C) and stable cycling with areal capacities up to 10 mAh cm–2 at 23 °C. Multidimensional engineering strategies, from grain to matrix and interface, are further investigated to improve low-stack pressure (5 MPa) performance. This work advances the potential of alloy anodes for practical application of ASSBs.
- 8 September 2026
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 148 (37) , 40053-40064
Engineering a Fast Li + -Diffusion Secondary Phase in Sn Anodes for Low-Pressure All-Solid-State Batteries
Alloys are promising anode candidates for all-solid-state batteries (ASSBs) due to their high specific capacities and regulated interphase with the nonflowing solid-state electrolytes (SSEs). However, selection of alloys is constrained by low initial Coulombic efficiency (ICE), which often excludes candidates with high specific capacity and mechanical deformability─parameters essential for high energy density and low-stack pressure operation. In this work, we reassess and unlock the potential of tin (Sn) anodes in ASSBs. By incorporating bismuth (Bi) as a secondary element, we developed low-cost, diffusion-engineered Sn–Bi binary elemental anodes achieving a high ICE (∼90%) and specific capacity (∼700 mAh g–1). Electrochemical characterizations, first-principles calculations, and cross-sectional morphologies reveal that Li3Bi exhibits a significantly higher Li diffusion coefficient (3.5 × 10–6 cm2 s–1) compared to LiSn and Li13Sn5 (1.5 × 10–14 and 1.3 × 10–11 cm2 s–1, respectively), remains stable in a larger voltage window, and facilitates diffusion throughout the electrode for reversible Sn (de)lithiation. Sn–Bi full cells coupled with a LiNi0.82Co0.11Mn0.07O2 (NCM82) cathode demonstrate high rate capability (1 C) and stable cycling with areal capacities up to 10 mAh cm–2 at 23 °C. Multidimensional engineering strategies, from grain to matrix and interface, are further investigated to improve low-stack pressure (5 MPa) performance. This work advances the potential of alloy anodes for practical application of ASSBs.
- Open Access
- 18 November 2025
- Published by AIP Publishing in APL Electronic Devices
- Vol. 1 (4)
Monolithically integrated pixel architecture with colloidal quantum dots and thin film transistors for SWIR imaging
Infrared (IR) imaging, particularly in the short-wave infrared (SWIR) range, is important for applications such as remote sensing, biomedical diagnostics, and machine vision. Yet, widespread deployment remains constrained because today’s IR imaging primarily uses epitaxial III–V photodetectors, which deliver high responsivity and low dark current but require expensive, (nearly) lattice-matched substrates, high-temperature growth, and complicated hybrid integration of the focal plane array and ROIC. Alternatively, colloidal quantum dot (CQD) photodiodes are attractive for their solution processability with a tunable bandgap on large-area, low-cost crystalline or non-crystalline substrates. Here, we present a monolithic pixel architecture that integrates a PbS CQD photodiode in photovoltaic mode and an IGZO TFT in subthreshold mode. This configuration achieves a high optical-to-current conversion gain on the order of 10, 000 at 1060 nm wavelength with low dark current and over 1 MHz bandwidth to support a high frame rate. The demonstrated approach offers a scalable and manufacturable path toward low-cost SWIR imaging over large, panel-sized platforms.
- 18 November 2025
- Published by AIP Publishing in APL Electronic Devices
- Vol. 1 (4)
Open AccessMonolithically integrated pixel architecture with colloidal quantum dots and thin film transistors for SWIR imaging
Infrared (IR) imaging, particularly in the short-wave infrared (SWIR) range, is important for applications such as remote sensing, biomedical diagnostics, and machine vision. Yet, widespread deployment remains constrained because today’s IR imaging primarily uses epitaxial III–V photodetectors, which deliver high responsivity and low dark current but require expensive, (nearly) lattice-matched substrates, high-temperature growth, and complicated hybrid integration of the focal plane array and ROIC. Alternatively, colloidal quantum dot (CQD) photodiodes are attractive for their solution processability with a tunable bandgap on large-area, low-cost crystalline or non-crystalline substrates. Here, we present a monolithic pixel architecture that integrates a PbS CQD photodiode in photovoltaic mode and an IGZO TFT in subthreshold mode. This configuration achieves a high optical-to-current conversion gain on the order of 10, 000 at 1060 nm wavelength with low dark current and over 1 MHz bandwidth to support a high frame rate. The demonstrated approach offers a scalable and manufacturable path toward low-cost SWIR imaging over large, panel-sized platforms.
- 1 October 2025
- Published by American Chemical Society (ACS) in ACS Nano
- Vol. 19 (40) , 35401-35413
Artificial Solar-Blind Optosynapses Using Amorphous Gallium Oxide Phototransistors for Optical In-Sensor Neuromorphic Applications
Optoelectronic neuromorphic devices, which mimic the functionalities of the human eye and brain neural systems, have attracted significant interest for enabling highly energy-efficient computing systems for next-generation artificial intelligence applications. However, several key challenges persist, including a limited dynamic range for light-induced synaptic weights, low optical photogain, lack of spectral selectivity, and incompatibility with heterogeneous integration. Addressing these issues is essential for unlocking the full potential of optosynaptic devices in advanced AI systems. In this work, we develop artificial solar-blind optoelectronic synaptic devices exhibiting high pattern recognition rates (>92%) in neural network training using ultrawide-bandgap amorphous gallium oxide (a-GaOx) thin-film transistors (TFTs). The device functions through deep ultraviolet (DUV) optically induced potentiation and gate-terminal electrical depression processes, exhibiting excellent plasticity and a wide conductance weight update range. This performance is attributed to its superior TFT switching characteristics, strong DUV photoresponse with a dynamic gain exceeding 108, and UV-triggered persistent photoconductivity (PPC) lasting over 1000 s. Moreover, the device can be fabricated at a low temperature of 450 °C, ensuring compatibility with the complementary metal-oxide-semiconductor (CMOS) back-end-of-line (BEOL) process.
- 1 October 2025
- Published by American Chemical Society (ACS) in ACS Nano
- Vol. 19 (40) , 35401-35413
Artificial Solar-Blind Optosynapses Using Amorphous Gallium Oxide Phototransistors for Optical In-Sensor Neuromorphic Applications
Optoelectronic neuromorphic devices, which mimic the functionalities of the human eye and brain neural systems, have attracted significant interest for enabling highly energy-efficient computing systems for next-generation artificial intelligence applications. However, several key challenges persist, including a limited dynamic range for light-induced synaptic weights, low optical photogain, lack of spectral selectivity, and incompatibility with heterogeneous integration. Addressing these issues is essential for unlocking the full potential of optosynaptic devices in advanced AI systems. In this work, we develop artificial solar-blind optoelectronic synaptic devices exhibiting high pattern recognition rates (>92%) in neural network training using ultrawide-bandgap amorphous gallium oxide (a-GaOx) thin-film transistors (TFTs). The device functions through deep ultraviolet (DUV) optically induced potentiation and gate-terminal electrical depression processes, exhibiting excellent plasticity and a wide conductance weight update range. This performance is attributed to its superior TFT switching characteristics, strong DUV photoresponse with a dynamic gain exceeding 108, and UV-triggered persistent photoconductivity (PPC) lasting over 1000 s. Moreover, the device can be fabricated at a low temperature of 450 °C, ensuring compatibility with the complementary metal-oxide-semiconductor (CMOS) back-end-of-line (BEOL) process.
- 5 August 2025
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
Long-Term Sustainability of High-Mobility Ultrathin a-IGZO TFT with Double-Layered Passivation
The development of ultrathin amorphous indium-gallium-zinc oxide (a-IGZO) thin-film transistor (TFT) technology, capable of delivering high mobility and robust device reliability, is essential for next-generation oxide-TFT applications such as 3D monolithic highly integrated circuits. While using In-rich a-IGZO channels is a straightforward strategy to enhance device mobility, it causes serious TFT instability due to the increase in the weakly bonded In-O. Therefore, overcoming the trade-off between mobility and stability is critical for the advancement of oxide-TFT technology. In this study, we developed an ultrathin high-mobility a-IGZO-TFT using the In-rich channel with In/Ga/Zn = 2:1:1, equipped with double-layered passivation consisting of plasma-enhanced chemical vapor deposition (PECVD)-SiO2/ALD-Al2O3, and demonstrated a high device mobility of ∼40 cm2 V-1 s-1 and excellent positive and negative bias stability even after one year. The PECVD-SiO2 layer contributes to mobility enhancement in the a-IGZO channel, while the ALD-Al2O3 layer ensures long-term stability by effectively suppressing oxygen vacancy (VO) formation through the prevention of oxygen out-diffusion from the channel. This study highlights the significance of back-channel passivation engineering in simultaneously enhancing both the mobility and the reliability of a-IGZO TFTs, paving the way for their application in high-performance, long-lifetime electronics.
- 5 August 2025
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
Long-Term Sustainability of High-Mobility Ultrathin a-IGZO TFT with Double-Layered Passivation
The development of ultrathin amorphous indium-gallium-zinc oxide (a-IGZO) thin-film transistor (TFT) technology, capable of delivering high mobility and robust device reliability, is essential for next-generation oxide-TFT applications such as 3D monolithic highly integrated circuits. While using In-rich a-IGZO channels is a straightforward strategy to enhance device mobility, it causes serious TFT instability due to the increase in the weakly bonded In-O. Therefore, overcoming the trade-off between mobility and stability is critical for the advancement of oxide-TFT technology. In this study, we developed an ultrathin high-mobility a-IGZO-TFT using the In-rich channel with In/Ga/Zn = 2:1:1, equipped with double-layered passivation consisting of plasma-enhanced chemical vapor deposition (PECVD)-SiO2/ALD-Al2O3, and demonstrated a high device mobility of ∼40 cm2 V-1 s-1 and excellent positive and negative bias stability even after one year. The PECVD-SiO2 layer contributes to mobility enhancement in the a-IGZO channel, while the ALD-Al2O3 layer ensures long-term stability by effectively suppressing oxygen vacancy (VO) formation through the prevention of oxygen out-diffusion from the channel. This study highlights the significance of back-channel passivation engineering in simultaneously enhancing both the mobility and the reliability of a-IGZO TFTs, paving the way for their application in high-performance, long-lifetime electronics.
- 21 July 2025
- Published by American Chemical Society (ACS) in ACS Applied Engineering Materials
- Vol. 3 (8) , 2624-2637
Resistive Switching of Spinel Li4Ti5O12 Lithium-Ion Battery Material for Neuromorphic Computing
- 21 July 2025
- Published by American Chemical Society (ACS) in ACS Applied Engineering Materials
- Vol. 3 (8) , 2624-2637
Resistive Switching of Spinel Li4Ti5O12 Lithium-Ion Battery Material for Neuromorphic Computing
Wafer‐Scale High Mobility 2D Tellurium Thin‐Film Transistor for Heterogeneous Integrated 3D‐CFET Logic Circuits
Back‐end‐of‐line (BEOL)‐compatible complementary field‐effect transistor (CFET), which vertically integrates p‐channel and n‐channel thin‐film transistors (TFT) in a 3D architecture on Si‐CMOS, is critical for next‐generation electronics, enabling higher functionality and improved energy efficiency. However, the absence of a high‐performance BEOL‐compatible p‐channel TFT, the counterpart of n‐channel oxide‐TFT, continues to pose a significant challenge for the development of wafer‐scale CFET technology. Tellurium (Te) has recently emerged as a promising candidate for p‐channel TFT, but its device performance is not yet satisfactory. Here, in‐plane crystal‐oriented 2D Te channel thin‐film is successfully grown to improve its carrier transport and successfully demonstrated high mobility p‐channel Te‐TFT with high saturation mobility (≈31 cm 2 V s −1 ). The maximum process temperature is as low as 150 °C, enabling the fabrication of 3D‐vertical CFET device with heterogeneous integration with oxide‐TFTs on a 2‐inch wafer. The hybrid CFET, composed of 2D p‐Te and n‐a‐IGZO TFTs, exhibits an excellent inverter characteristic with a high voltage gain of 162 at V DD = 4 V. This study highlights the potential of low‐temperature processed p‐channel Te‐TFTs for BEOL heterogeneous‐compatible integration with oxide‐TFT technology, providing enhanced functionality and high energy‐efficiency for next‐generation electronics.
Wafer‐Scale High Mobility 2D Tellurium Thin‐Film Transistor for Heterogeneous Integrated 3D‐CFET Logic Circuits
Back‐end‐of‐line (BEOL)‐compatible complementary field‐effect transistor (CFET), which vertically integrates p‐channel and n‐channel thin‐film transistors (TFT) in a 3D architecture on Si‐CMOS, is critical for next‐generation electronics, enabling higher functionality and improved energy efficiency. However, the absence of a high‐performance BEOL‐compatible p‐channel TFT, the counterpart of n‐channel oxide‐TFT, continues to pose a significant challenge for the development of wafer‐scale CFET technology. Tellurium (Te) has recently emerged as a promising candidate for p‐channel TFT, but its device performance is not yet satisfactory. Here, in‐plane crystal‐oriented 2D Te channel thin‐film is successfully grown to improve its carrier transport and successfully demonstrated high mobility p‐channel Te‐TFT with high saturation mobility (≈31 cm 2 V s −1 ). The maximum process temperature is as low as 150 °C, enabling the fabrication of 3D‐vertical CFET device with heterogeneous integration with oxide‐TFTs on a 2‐inch wafer. The hybrid CFET, composed of 2D p‐Te and n‐a‐IGZO TFTs, exhibits an excellent inverter characteristic with a high voltage gain of 162 at V DD = 4 V. This study highlights the potential of low‐temperature processed p‐channel Te‐TFTs for BEOL heterogeneous‐compatible integration with oxide‐TFT technology, providing enhanced functionality and high energy‐efficiency for next‐generation electronics.
- Open Access
- 8 May 2025
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 137 (18)
Understanding negative-bias-stress-induced instability and hump phenomenon in amorphous In–Ga–Zn–O thin-film transistors: Impact of source/drain contacts and carrier diffusion
Reliability and stability of oxide thin-film transistors (TFT) are a longstanding unsettled research topic and are critical for practical device applications. This work discussed negative gate bias stress (NBS)-induced instability, including the bias-induced hump phenomenon for amorphous In–Ga–Zn–O (a-IGZO)-TFT. To identify the key factors contributing to NBS instability, we quantitatively evaluated lateral electron diffusion behavior in the a-IGZO channel by transmission line method (TLM) analysis and developed a critical channel length scale model. The effective source/drain (S/D) contact diffusion length (2LD) was extracted, where the lateral carrier distribution (ne) profiles were depicted, showing that nLD was ∼6.5 × 1017 cm−3. The LD was 3%–5% proportional to the maximum extra-carrier spreading length scale (LC) from S/D extension region into the channel, affected >20% of each side of the lateral channel area, and made significant impacts on the TFT stability. This model successfully explained the notable threshold (Vth) roll-off characteristics and mobility variations in the shorter-channel devices. Short-term and long-term NBS stability tests found that short-channel devices with a 5 μm length exhibited large negative Vth shifts accompanied by hump behavior and broadened hysteresis window due to LD and LC diffusion influence. Based on the proposed carrier diffusion model, the NBS-induced TFT instability was attributed to the formation of a highly conductive back-channel layer originating from the electron accumulation by lateral carrier diffusion from S/D region extension. This study provided a quantitative insight into NBS-induced microscopic changes in the a-IGZO channel, contributing to the understanding of bias-instability and the development of a highly stable oxide-TFTs.
- 8 May 2025
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 137 (18)
Open AccessUnderstanding negative-bias-stress-induced instability and hump phenomenon in amorphous In–Ga–Zn–O thin-film transistors: Impact of source/drain contacts and carrier diffusion
Reliability and stability of oxide thin-film transistors (TFT) are a longstanding unsettled research topic and are critical for practical device applications. This work discussed negative gate bias stress (NBS)-induced instability, including the bias-induced hump phenomenon for amorphous In–Ga–Zn–O (a-IGZO)-TFT. To identify the key factors contributing to NBS instability, we quantitatively evaluated lateral electron diffusion behavior in the a-IGZO channel by transmission line method (TLM) analysis and developed a critical channel length scale model. The effective source/drain (S/D) contact diffusion length (2LD) was extracted, where the lateral carrier distribution (ne) profiles were depicted, showing that nLD was ∼6.5 × 1017 cm−3. The LD was 3%–5% proportional to the maximum extra-carrier spreading length scale (LC) from S/D extension region into the channel, affected >20% of each side of the lateral channel area, and made significant impacts on the TFT stability. This model successfully explained the notable threshold (Vth) roll-off characteristics and mobility variations in the shorter-channel devices. Short-term and long-term NBS stability tests found that short-channel devices with a 5 μm length exhibited large negative Vth shifts accompanied by hump behavior and broadened hysteresis window due to LD and LC diffusion influence. Based on the proposed carrier diffusion model, the NBS-induced TFT instability was attributed to the formation of a highly conductive back-channel layer originating from the electron accumulation by lateral carrier diffusion from S/D region extension. This study provided a quantitative insight into NBS-induced microscopic changes in the a-IGZO channel, contributing to the understanding of bias-instability and the development of a highly stable oxide-TFTs.
- Top Cited PapersOpen Access
- 22 February 2025
- Published by Springer Nature in Nature Communications
- Vol. 16 (1) , 1-13
Low-temperature pressure-assisted liquid-metal printing for β-Ga2O3 thin-film transistors
Developing a low-temperature and cost-effective manufacturing process for energy-efficient and high-performance oxide-thin-film transistors (TFTs) is a crucial step toward advancing next-generation device applications such as wearable and flexible electronics. Among several methods, a liquid-metal printing technique is considered a promising, cost-effective oxide semiconductor process due to its inherent advantages, such as vacuum-free, low-thermal budget, high throughput, and scalability. In this study, we have developed a pressure-assisted liquid-metal printing technique enabling the low-temperature synthesis of polycrystalline wide bandgap n-channel oxide-TFTs. The n-channel oxide TFTs based on ~3 nm-thick β-Ga2O3 channels exhibited good TFT switching properties with a threshold voltage of ~3.8 V, a saturation mobility of ~11.7 cm2 V−1 s−1, an on/off-current ratio of ~109, and a subthreshold slope of ~163 mV/decade. We also observed p-channel operation in the off-stoichiometric GaOx channels fabricated at high-pressure conditions. Toward oxide-based circuit applications, we developed high-performance oxide-TFT-based inverters. While our approach can promote the advancement of low-temperature manufacturing for oxide TFT technology, further work will be necessary to confirm the role of the applied pressure in the β-Ga2O3 crystallization process.
- 22 February 2025
- Published by Springer Nature in Nature Communications
- Vol. 16 (1) , 1-13
Top Cited PapersOpen AccessLow-temperature pressure-assisted liquid-metal printing for β-Ga2O3 thin-film transistors
Developing a low-temperature and cost-effective manufacturing process for energy-efficient and high-performance oxide-thin-film transistors (TFTs) is a crucial step toward advancing next-generation device applications such as wearable and flexible electronics. Among several methods, a liquid-metal printing technique is considered a promising, cost-effective oxide semiconductor process due to its inherent advantages, such as vacuum-free, low-thermal budget, high throughput, and scalability. In this study, we have developed a pressure-assisted liquid-metal printing technique enabling the low-temperature synthesis of polycrystalline wide bandgap n-channel oxide-TFTs. The n-channel oxide TFTs based on ~3 nm-thick β-Ga2O3 channels exhibited good TFT switching properties with a threshold voltage of ~3.8 V, a saturation mobility of ~11.7 cm2 V−1 s−1, an on/off-current ratio of ~109, and a subthreshold slope of ~163 mV/decade. We also observed p-channel operation in the off-stoichiometric GaOx channels fabricated at high-pressure conditions. Toward oxide-based circuit applications, we developed high-performance oxide-TFT-based inverters. While our approach can promote the advancement of low-temperature manufacturing for oxide TFT technology, further work will be necessary to confirm the role of the applied pressure in the β-Ga2O3 crystallization process.
- 19 December 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Electron Device Letters
- Vol. 46 (2) , 294-297
Oxide-PMOS Inverter Using p-SnO Thin-Film Transistors With Back-Channel SnO/a-GaOₓ p-n Heterojunction Structure
The absence of enhancement-mode (E-mode) p-channel oxide thin-film transistor (TFT) limited p-channel oxide-TFT applications. To overcome this challenge, a low-temperature back-channel pn -heterojunction structure utilizing n-type amorphous-GaO x was developed for the E-mode p-channel SnO-TFTs. This approach minimized process-induced damage to p-channel SnO, offering stable E-mode operation without compromising device performance. The E-mode SnO-TFT demonstrated a threshold voltage of –4.7 V, a hole field-effect mobility of 2.6 cm 2 /(Vs), demonstrating device performance compatible with the depletion mode (D-mode) device. The device experimental and simulation analysis for the pn -diode confirmed that the present SnO/a-GaO x pn -junction created a longer hole carrier depletion width of ~17 nm than the thickness of the SnO channel ( t ~10 nm) at thermal equilibrium, implying that the excess hole in the SnO channel was fully depleted from the back-channel. The zero- V GS -load p-channel metal-oxide-semiconductor (PMOS) inverters composed of the D-mode and E-mode SnO TFTs were successfully fabricated. The inverters exhibited full-swing operation, high gain of ~200, and noise immunity of ~60%, demonstrating a promising approach for advancing p-channel oxide-TFT technology.
- 19 December 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Electron Device Letters
- Vol. 46 (2) , 294-297
Oxide-PMOS Inverter Using p-SnO Thin-Film Transistors With Back-Channel SnO/a-GaOₓ p-n Heterojunction Structure
The absence of enhancement-mode (E-mode) p-channel oxide thin-film transistor (TFT) limited p-channel oxide-TFT applications. To overcome this challenge, a low-temperature back-channel pn -heterojunction structure utilizing n-type amorphous-GaO x was developed for the E-mode p-channel SnO-TFTs. This approach minimized process-induced damage to p-channel SnO, offering stable E-mode operation without compromising device performance. The E-mode SnO-TFT demonstrated a threshold voltage of –4.7 V, a hole field-effect mobility of 2.6 cm 2 /(Vs), demonstrating device performance compatible with the depletion mode (D-mode) device. The device experimental and simulation analysis for the pn -diode confirmed that the present SnO/a-GaO x pn -junction created a longer hole carrier depletion width of ~17 nm than the thickness of the SnO channel ( t ~10 nm) at thermal equilibrium, implying that the excess hole in the SnO channel was fully depleted from the back-channel. The zero- V GS -load p-channel metal-oxide-semiconductor (PMOS) inverters composed of the D-mode and E-mode SnO TFTs were successfully fabricated. The inverters exhibited full-swing operation, high gain of ~200, and noise immunity of ~60%, demonstrating a promising approach for advancing p-channel oxide-TFT technology.