Jaideep Dutta
Jaideep Dutta has a total of 11 co-authors. Here are the top co-authors by number of shared publications:
- Balaram Kundu
Jadavpur University
12 shared publications S. Narendranath
Natl Inst Technol Karnataka Surathkal, Dept Mech Engn, NH 66, Mangaluru 575025, Karnataka, India
2 shared publicationsAleksandr Zhilin
Ural Federal University
1 shared publicationBalaram Kundu
Jadavpur University
1 shared publication- Dipankar Bhanja
Department of Mechanical Engineering, National Institute of Technology Silchar, Silchar, India
1 shared publication Golam Kibria
Aliah University
1 shared publication
Latest Publications
- 19 February 2025
- Published by Springer Nature in Lasers in Medical Science
- Vol. 40 (1) , 1-10
Multilayered numerical modelling of bio-thermal aspects during laser assisted treatment of internal haemorrhoid developed in rectum
Haemorrhoids are swollen blood vessels developed around the anus. Internal haemorrhoids are generally not visible from outside due to its growth inside the rectum and it is generally considered as painless. However, a prolapsed internal haemorrhoid may cause discomfort, pain and irritation. For the treatment of internal haemorrhoid, laser assisted therapy would be helpful due to its rooted advantages such as post-surgery minimal pain, lesser bleeding, quicker healing, shorter recovery period, shorter surgical and overall treatment duration, lower risk of recurrence and least risk of post-surgical infections. The genesis of present research work deals with the development of mathematical modelling to capture the bio-thermal response during laser assisted therapy of internal haemorrhoid developed in the rectum. The explicit form of finite difference method is employed as numerical tool for the mathematical study and the physical domain is considered as multilayered tissue (three different layers of rectum: muscle, submucosa and mucosa). A Gaussian laser beam is considered as heat source to destroy the abnormal growth inside the rectum. Temperature variation in multi-layered tissue is investigated for laser heat input and absorption radius along the temporal and spatial coordinate. Temperature drop has been evidenced in the interfaces of multi-layered rectum tissue. The research outcome is verified with the published numerical model with negligible variation.
- 19 February 2025
- Published by Springer Nature in Lasers in Medical Science
- Vol. 40 (1) , 1-10
Multilayered numerical modelling of bio-thermal aspects during laser assisted treatment of internal haemorrhoid developed in rectum
Haemorrhoids are swollen blood vessels developed around the anus. Internal haemorrhoids are generally not visible from outside due to its growth inside the rectum and it is generally considered as painless. However, a prolapsed internal haemorrhoid may cause discomfort, pain and irritation. For the treatment of internal haemorrhoid, laser assisted therapy would be helpful due to its rooted advantages such as post-surgery minimal pain, lesser bleeding, quicker healing, shorter recovery period, shorter surgical and overall treatment duration, lower risk of recurrence and least risk of post-surgical infections. The genesis of present research work deals with the development of mathematical modelling to capture the bio-thermal response during laser assisted therapy of internal haemorrhoid developed in the rectum. The explicit form of finite difference method is employed as numerical tool for the mathematical study and the physical domain is considered as multilayered tissue (three different layers of rectum: muscle, submucosa and mucosa). A Gaussian laser beam is considered as heat source to destroy the abnormal growth inside the rectum. Temperature variation in multi-layered tissue is investigated for laser heat input and absorption radius along the temporal and spatial coordinate. Temperature drop has been evidenced in the interfaces of multi-layered rectum tissue. The research outcome is verified with the published numerical model with negligible variation.
- 1 June 2024
- Published by Pleiades Publishing Ltd in Journal of Applied Mechanics and Technical Physics
- Vol. 65 (3) , 456-464
EVOLUTION OF THE MATHEMATICAL MODEL CHARACTERIZING THE THERMAL FIELD DEVELOPED IN SUBMERGED ARC WELDING
A two-dimensional exact analytical solution of the thermal field developed during the submerged arc welding process with visualization of the thermal surface contour for analyzing the heat flow in the domain with the hybrid application of Duhamel’s theorem and finite integral transform approach is obtained. The thermal field arising in submerged arc welding of thick EH36 steel plates is studied. An ellipsoidal heat source model is assumed. The developed thermal field is investigated with variations of several process parameters, such as the heat source velocity, heat input, and lag time of movement of the heat source involved in the welding process.
- 1 June 2024
- Published by Pleiades Publishing Ltd in Journal of Applied Mechanics and Technical Physics
- Vol. 65 (3) , 456-464
EVOLUTION OF THE MATHEMATICAL MODEL CHARACTERIZING THE THERMAL FIELD DEVELOPED IN SUBMERGED ARC WELDING
A two-dimensional exact analytical solution of the thermal field developed during the submerged arc welding process with visualization of the thermal surface contour for analyzing the heat flow in the domain with the hybrid application of Duhamel’s theorem and finite integral transform approach is obtained. The thermal field arising in submerged arc welding of thick EH36 steel plates is studied. An ellipsoidal heat source model is assumed. The developed thermal field is investigated with variations of several process parameters, such as the heat source velocity, heat input, and lag time of movement of the heat source involved in the welding process.
- 22 April 2024
- Published by Springer Nature in Lasers in Medical Science
- Vol. 39 (1) , 1-12
Bio-thermal response during laser haemorrhoidoplasty: an exclusive analytical and numerical approach for theoretical investigation
Haemorrhoidal disease is identified by declension of the inflamed and bleeding of vascular tissues of the anal canal. Traditionally, haemorrhoids are associated with chronic constipation and the most common symptoms are irritation in anus region, pain and discomfort, swelling around anus, tender lumps around the anus and rectal bleeding (depending upon the grade of haemorrhoid). Among the several conventional treatment procedures (commonly mentioned as, rubber band litigation, sclerotherapy and electrotherapy), laser haemorrhoidoplasty is an out-patient and less-invasive laparoscopic procedure. From literature survey it has been observed that an exclusive theoretical model depicting the impact of 1064 nm wavelength laser wave on living tissues subjected to haemorrhoid therapy is not available. This research work is a pioneering attempt to develop a theoretical study attributing specifically on laser therapy of haemorrhoid treatment based on Pennes’ biological heat transfer model. The corresponding mathematical model has been solved by analytical method to establish thermal response of tissue during the treatment and also the same has been solved a numerical approach based on finite difference method to validate the feasibility of former method due to unavailability of any theoretical model. Impact of variation of blood perfusion term, laser pulse time and optical penetration depth on temperature response of skin tissue is captured. The tissue temperature decreases along with time of laser exposure with increasing the blood perfusion rate as it carries away large amount of heat. With the increase in laser pulse time, tissue temperature declines due to shorter pulse time resulting in higher energy consumed by electrons. The research outcome is successfully validated with less than 1% of error observed between the appointed analytical and numerical scheme.
- 22 April 2024
- Published by Springer Nature in Lasers in Medical Science
- Vol. 39 (1) , 1-12
Bio-thermal response during laser haemorrhoidoplasty: an exclusive analytical and numerical approach for theoretical investigation
Haemorrhoidal disease is identified by declension of the inflamed and bleeding of vascular tissues of the anal canal. Traditionally, haemorrhoids are associated with chronic constipation and the most common symptoms are irritation in anus region, pain and discomfort, swelling around anus, tender lumps around the anus and rectal bleeding (depending upon the grade of haemorrhoid). Among the several conventional treatment procedures (commonly mentioned as, rubber band litigation, sclerotherapy and electrotherapy), laser haemorrhoidoplasty is an out-patient and less-invasive laparoscopic procedure. From literature survey it has been observed that an exclusive theoretical model depicting the impact of 1064 nm wavelength laser wave on living tissues subjected to haemorrhoid therapy is not available. This research work is a pioneering attempt to develop a theoretical study attributing specifically on laser therapy of haemorrhoid treatment based on Pennes’ biological heat transfer model. The corresponding mathematical model has been solved by analytical method to establish thermal response of tissue during the treatment and also the same has been solved a numerical approach based on finite difference method to validate the feasibility of former method due to unavailability of any theoretical model. Impact of variation of blood perfusion term, laser pulse time and optical penetration depth on temperature response of skin tissue is captured. The tissue temperature decreases along with time of laser exposure with increasing the blood perfusion rate as it carries away large amount of heat. With the increase in laser pulse time, tissue temperature declines due to shorter pulse time resulting in higher energy consumed by electrons. The research outcome is successfully validated with less than 1% of error observed between the appointed analytical and numerical scheme.
- 1 August 2022
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering
- Vol. 239 (3) , 1042-1055
Evaluation of thermal characteristics of laser induced heating of microfilm in relation to printed circuit board manufacturing
The emerging field of microelectronics has expeditiously developed over recent decades, owing to the development of novel materials and state-of-the-art fabrication technologies, as it offers crucial solutions to specific and complicated challenges. Laser systems are effectively utilized in material processing applications due to their inherent capabilities that provide rapid, quality and flexibility to reduce production costs involved. Microelectronics manufacturing basically comprises circuit boards (printed circuit boards), semiconductor, IC wafers are a few applications where laser system has been employed over traditional manufacturing technologies. In the viewpoint of the importance of the application of laser in the arena of microelectronics, the present research work is dedicated to evaluate the thermal characteristics developed in laser heating of microfilm (printed circuit board). During the operation of laser heating on the substrate surface, the quantity of material removal is largely dependent on the high temperature induced by the laser. The parametric laser-substrate interaction phenomena are the prime deciding factor for the successful accomplishment of the manufacturing operation. From the literature review, it has been observed that not much concentration has been given to the application of non-Fourier’s model though it is specifically suited for microscale heat transfer. This research paper theoretically investigates the thermal characteristics (peak temperature, temperature distribution curvature, pulse time, optical penetration depth, time of laser exposure, laser absorption radius and so on) by employing non-Fourier’s heat conduction model with pulse laser heat source. The theoretical estimation will be validated by the existing experimental research outcomes. The present research paper might be an asset for deciding the design of process variables and protocols in terms of laser-based manufacturing in the arena of microelectronics.
- 1 August 2022
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering
- Vol. 239 (3) , 1042-1055
Evaluation of thermal characteristics of laser induced heating of microfilm in relation to printed circuit board manufacturing
The emerging field of microelectronics has expeditiously developed over recent decades, owing to the development of novel materials and state-of-the-art fabrication technologies, as it offers crucial solutions to specific and complicated challenges. Laser systems are effectively utilized in material processing applications due to their inherent capabilities that provide rapid, quality and flexibility to reduce production costs involved. Microelectronics manufacturing basically comprises circuit boards (printed circuit boards), semiconductor, IC wafers are a few applications where laser system has been employed over traditional manufacturing technologies. In the viewpoint of the importance of the application of laser in the arena of microelectronics, the present research work is dedicated to evaluate the thermal characteristics developed in laser heating of microfilm (printed circuit board). During the operation of laser heating on the substrate surface, the quantity of material removal is largely dependent on the high temperature induced by the laser. The parametric laser-substrate interaction phenomena are the prime deciding factor for the successful accomplishment of the manufacturing operation. From the literature review, it has been observed that not much concentration has been given to the application of non-Fourier’s model though it is specifically suited for microscale heat transfer. This research paper theoretically investigates the thermal characteristics (peak temperature, temperature distribution curvature, pulse time, optical penetration depth, time of laser exposure, laser absorption radius and so on) by employing non-Fourier’s heat conduction model with pulse laser heat source. The theoretical estimation will be validated by the existing experimental research outcomes. The present research paper might be an asset for deciding the design of process variables and protocols in terms of laser-based manufacturing in the arena of microelectronics.
- 10 March 2021
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 129 (10) , 105102
Hybrid analytical models to estimate non-equilibrium temperatures in live-tissues based on appropriate initial thermal-field and non-invasive therapeutic heating
This study develops an exact analysis of various bio-heat models, namely, classical, single-phase-lag, and dual-phase-lag models, for heat transfer in a single layer of living tissue. A new hybrid scheme coupled with the separation of variables and finite Fourier transform method has been employed for the closed-form solution. The skin surface of living tissues is heated by constant or unique oscillating heat sources to facilitate non-invasive therapeutic treatment. The existing literature survey highlights that most of the research works were associated with a constant initial temperature of tissues, whereas the present work reveals an implementation of a variable initial temperature to justify the prediction of thermal flow in living tissues before the therapy process to be initiated. Two unique oscillating (time-dependent) heat sources at the skin surface are implemented for the comparative aspect to find out an effective therapeutic condition. The results conclude that a sinusoidal heat source is a better option for the longer duration of the therapeutic heating to reach the thermal equilibrium, while a cosine heat source is more applicable for the short time span of treatment with a range of time-lags in the dual-phase-lag bioheat model. Finally, for the accuracy aspect of the model, the present work was validated with the published work by considering a design case. For the accurately analytical establishment, the present work can predict an actual thermal response which may help to decide a proper treatment protocol for thermal therapies.
- 10 March 2021
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 129 (10) , 105102
Hybrid analytical models to estimate non-equilibrium temperatures in live-tissues based on appropriate initial thermal-field and non-invasive therapeutic heating
This study develops an exact analysis of various bio-heat models, namely, classical, single-phase-lag, and dual-phase-lag models, for heat transfer in a single layer of living tissue. A new hybrid scheme coupled with the separation of variables and finite Fourier transform method has been employed for the closed-form solution. The skin surface of living tissues is heated by constant or unique oscillating heat sources to facilitate non-invasive therapeutic treatment. The existing literature survey highlights that most of the research works were associated with a constant initial temperature of tissues, whereas the present work reveals an implementation of a variable initial temperature to justify the prediction of thermal flow in living tissues before the therapy process to be initiated. Two unique oscillating (time-dependent) heat sources at the skin surface are implemented for the comparative aspect to find out an effective therapeutic condition. The results conclude that a sinusoidal heat source is a better option for the longer duration of the therapeutic heating to reach the thermal equilibrium, while a cosine heat source is more applicable for the short time span of treatment with a range of time-lags in the dual-phase-lag bioheat model. Finally, for the accuracy aspect of the model, the present work was validated with the published work by considering a design case. For the accurately analytical establishment, the present work can predict an actual thermal response which may help to decide a proper treatment protocol for thermal therapies.
- 1 November 2020
- Published by Pleiades Publishing Ltd in Journal of Applied Mechanics and Technical Physics
- Vol. 61 (6) , 955-963
EXACT ANALYSIS FOR THE TEMPERATURE RESPONSE IN TUMOURS FOR THREE-DIMENSIONAL HEAT TRANSFER DURING THE THERAPEUTIC TIME
This article addresses the formulation of an exact analytical solution of a three-dimensional dual-phase-lag bioheat model in relation to living tissues of human organs subjected to regional hyperthermia treatment. The solution methodology is employed as a finite integral transform in combination with a filtered approach. A renovated initial condition with appropriate boundary conditions is imposed in the present modelling. Isotherms in different cross sections of the physical domain are generated and discussed with different thermal and geometric variables for establishing the exact temperature field. The present research output is compared with the published experimental work. The results show the necessity of a 3D analysis for an accurate prediction of the temperature response in tumour cells.
- 1 November 2020
- Published by Pleiades Publishing Ltd in Journal of Applied Mechanics and Technical Physics
- Vol. 61 (6) , 955-963
EXACT ANALYSIS FOR THE TEMPERATURE RESPONSE IN TUMOURS FOR THREE-DIMENSIONAL HEAT TRANSFER DURING THE THERAPEUTIC TIME
This article addresses the formulation of an exact analytical solution of a three-dimensional dual-phase-lag bioheat model in relation to living tissues of human organs subjected to regional hyperthermia treatment. The solution methodology is employed as a finite integral transform in combination with a filtered approach. A renovated initial condition with appropriate boundary conditions is imposed in the present modelling. Isotherms in different cross sections of the physical domain are generated and discussed with different thermal and geometric variables for establishing the exact temperature field. The present research output is compared with the published experimental work. The results show the necessity of a 3D analysis for an accurate prediction of the temperature response in tumour cells.