John Bruce Ralphin Rose
Research Subjects
John Bruce Ralphin Rose has a total of 27 co-authors. Here are the top co-authors by number of shared publications:
- Veerapathiran Thangaraj Gopinathan
Department of Aeronautical Engineering, Hindusthan College of Engineering & Technology, Coimbatore 641032, India
3 shared publications - Bibal Benifa John Vijaya
Department of Computer Science and Engineering, Indian Institute of Information Technology Kottayam, Kottayam, India
2 shared publications L. Prawin
Department of Mechanical Engineering, Anna University Regional Campus, Chennai, India
2 shared publications- A. Auster Nesan
Anna University Regional Campus-Tirunelveli
1 shared publication A. Vasudevan
Department of Mechanical Engineering, Anna University Regional Campus, Tirunelveli, India
1 shared publicationAwni Al-Omran
Chemistry Department, University of Surrey, Guilford, Surrey GU2 5XH, UK
1 shared publication
Latest Publications
- 24 April 2026
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy
Investigation of wind turbine blade defects using hybrid YOLOv8 and vision transformer
Ongoing supervision of wind turbine blades and their frameworks is an essential element of Structural Health Monitoring (SHM) systems. Unmanned Aerial Vehicles (UAV) have become increasingly significant for automated inspections in contemporary studies because of the impracticality of constant human monitoring. The use of computer vision in conjunction with machine learning is essential one for identifying the damages from images captured by UAVs. The work herein presents a hybrid two-stage pipeline that integrates YOLOv8 with CNN (DarkNet53) and lightweight Vision Transformer models (Swin-Tiny and DeiT-Small) to evaluate the detection performance under different architectural configurations. Two variants of YOLO-based object detection frameworks were implemented using different backbone feature extractors, including the CNN(DarkNet53), the Swin-Tiny transformer, and the DeiT-Small transformer. This investigation evaluates the model’s capacity to distinguish among five essential types of defects in wind turbine blades: paint peeling, leading-edge erosion, open damage, missing vortex generator, and non-open cracks. The framework is assessed using both imbalanced and balanced datasets, with performance comparisons conducted for quantitative criteria including accuracy, mAP, F1-score, recall, and FPS. Qualitative measurements are derived from the visual evaluation of predictions as bounding boxes. The YOLOv8 + DeiT-Small configuration trained on a balanced dataset has achieved excellent performance among the evaluated configurations. Dataset balancing plays a critical role in maximizing model performance, thus yielding comparably better accuracy, improved mAP, and smoother convergence, particularly when combined with computationally efficient backbone architectures.
- 24 April 2026
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy
Investigation of wind turbine blade defects using hybrid YOLOv8 and vision transformer
Ongoing supervision of wind turbine blades and their frameworks is an essential element of Structural Health Monitoring (SHM) systems. Unmanned Aerial Vehicles (UAV) have become increasingly significant for automated inspections in contemporary studies because of the impracticality of constant human monitoring. The use of computer vision in conjunction with machine learning is essential one for identifying the damages from images captured by UAVs. The work herein presents a hybrid two-stage pipeline that integrates YOLOv8 with CNN (DarkNet53) and lightweight Vision Transformer models (Swin-Tiny and DeiT-Small) to evaluate the detection performance under different architectural configurations. Two variants of YOLO-based object detection frameworks were implemented using different backbone feature extractors, including the CNN(DarkNet53), the Swin-Tiny transformer, and the DeiT-Small transformer. This investigation evaluates the model’s capacity to distinguish among five essential types of defects in wind turbine blades: paint peeling, leading-edge erosion, open damage, missing vortex generator, and non-open cracks. The framework is assessed using both imbalanced and balanced datasets, with performance comparisons conducted for quantitative criteria including accuracy, mAP, F1-score, recall, and FPS. Qualitative measurements are derived from the visual evaluation of predictions as bounding boxes. The YOLOv8 + DeiT-Small configuration trained on a balanced dataset has achieved excellent performance among the evaluated configurations. Dataset balancing plays a critical role in maximizing model performance, thus yielding comparably better accuracy, improved mAP, and smoother convergence, particularly when combined with computationally efficient backbone architectures.
- 1 December 2023
- Published by Pleiades Publishing Ltd in Theoretical Foundations of Chemical Engineering
- Vol. 57 (6) , 1572-1584
Bioinspired Superhydrophobic Material with Nafion Polymer for Anti-Icing Coating on Aluminium Alloy Surface
Aircraft icing is the formation and accumulation of ice on an aircraft’s windward surface. The impingement of super-cooled water droplets floating in clouds against a solid surface is the primary cause. Because it affects the aerodynamic form and poses a rising hazard to flight safety. This research gives a technique to overcome the ice accretion problemby preparation of Superhydrophobic coatings that can be utilized in aircraft. To create superhydrophobic surfaces, scientists have used many surface-modified functional coating methods based on perfluorinated polymer mixed with biomaterials. Herein, a plant leaf extract (Senna auriculata (Avaram in Tamil) which possesses good self-cleaning properties and better water-repellant properties like a lotus leaf, and exhibits several industrial applications such as anti-corrosive, anti-fogging, and anti-icing. The dried leaf extract is blend with Nafion polymer in ethanol and the as-prepared mixture coated on the polished surface of the aluminum alloy plate by using spray coating technique. The modified aluminum alloy (AA6061) plate surface was characterized with the help of a metallurgical microscope in different magnifications, scanning electron microscope and the measured contact angle (θ → 153°) is in good agreement with the superhydrophobicity requirements. High-speed optical microscopy helped to identify steady coalescence-induced droplet jumping during atmospheric water vapor condensation. This experimental result provides a new avenue for the environmentally benign fabrication of superhydrophobic metal-modified surfaces for various automotive applications.
- 1 December 2023
- Published by Pleiades Publishing Ltd in Theoretical Foundations of Chemical Engineering
- Vol. 57 (6) , 1572-1584
Bioinspired Superhydrophobic Material with Nafion Polymer for Anti-Icing Coating on Aluminium Alloy Surface
Aircraft icing is the formation and accumulation of ice on an aircraft’s windward surface. The impingement of super-cooled water droplets floating in clouds against a solid surface is the primary cause. Because it affects the aerodynamic form and poses a rising hazard to flight safety. This research gives a technique to overcome the ice accretion problemby preparation of Superhydrophobic coatings that can be utilized in aircraft. To create superhydrophobic surfaces, scientists have used many surface-modified functional coating methods based on perfluorinated polymer mixed with biomaterials. Herein, a plant leaf extract (Senna auriculata (Avaram in Tamil) which possesses good self-cleaning properties and better water-repellant properties like a lotus leaf, and exhibits several industrial applications such as anti-corrosive, anti-fogging, and anti-icing. The dried leaf extract is blend with Nafion polymer in ethanol and the as-prepared mixture coated on the polished surface of the aluminum alloy plate by using spray coating technique. The modified aluminum alloy (AA6061) plate surface was characterized with the help of a metallurgical microscope in different magnifications, scanning electron microscope and the measured contact angle (θ → 153°) is in good agreement with the superhydrophobicity requirements. High-speed optical microscopy helped to identify steady coalescence-induced droplet jumping during atmospheric water vapor condensation. This experimental result provides a new avenue for the environmentally benign fabrication of superhydrophobic metal-modified surfaces for various automotive applications.
- Open Access
Investigation of Aeroelastic Energy Extraction from Cantilever Structures under Sustained Oscillations
The present article is focused on a detailed computationalinvestigation of energy production capacity of various lightweight materials that are employed with piezoelectric vibration energy harvesters (PVEHs) subjected to various aeroelastic effects. Piezoelectric transducers are primarily employed to capture vibrational energy, which yields predictable and locally storable electrical energy. Higher energy extraction is possible under larger deflections of the structures when they are employed with PVEHs. In order to estimate the largest possible deflection of the structures, the response of them under external perturbations is estimated. An airplane wing consists of tapered planform, an advanced wind turbine blade, and the rectangular wings of an unmanned aerial vehicle (UAV) are considered for the vibrational analysis as the feasibility of achieving larger deflection is high compared with other aerodynamic surfaces. The stated elastic structures are modelled with different lightweight materials such as aluminium alloy, glass fibre-reinforced polymer (GFRP), titanium alloy, carbon fibre-reinforced polymer (CFRP), and Kevlar fibre-reinforced polymer (KFRP). Advanced partly coupled computational simulations are carried out with computational fluid dynamics (CFDs), and structural and vibrational effects to investigate the energy harvesting potential from the perturbations. Based on the outcomes of vibrational analysis, the raw transformable power production capacity of different lightweight materials that are employed with a cantilevered PVEH is estimated. The most suitable combination of material and associated aeroelastic effect which yields a significant amount of raw energy in each application is proposed and discussed with findings.
Open AccessInvestigation of Aeroelastic Energy Extraction from Cantilever Structures under Sustained Oscillations
The present article is focused on a detailed computationalinvestigation of energy production capacity of various lightweight materials that are employed with piezoelectric vibration energy harvesters (PVEHs) subjected to various aeroelastic effects. Piezoelectric transducers are primarily employed to capture vibrational energy, which yields predictable and locally storable electrical energy. Higher energy extraction is possible under larger deflections of the structures when they are employed with PVEHs. In order to estimate the largest possible deflection of the structures, the response of them under external perturbations is estimated. An airplane wing consists of tapered planform, an advanced wind turbine blade, and the rectangular wings of an unmanned aerial vehicle (UAV) are considered for the vibrational analysis as the feasibility of achieving larger deflection is high compared with other aerodynamic surfaces. The stated elastic structures are modelled with different lightweight materials such as aluminium alloy, glass fibre-reinforced polymer (GFRP), titanium alloy, carbon fibre-reinforced polymer (CFRP), and Kevlar fibre-reinforced polymer (KFRP). Advanced partly coupled computational simulations are carried out with computational fluid dynamics (CFDs), and structural and vibrational effects to investigate the energy harvesting potential from the perturbations. Based on the outcomes of vibrational analysis, the raw transformable power production capacity of different lightweight materials that are employed with a cantilevered PVEH is estimated. The most suitable combination of material and associated aeroelastic effect which yields a significant amount of raw energy in each application is proposed and discussed with findings.
- 10 January 2023
- Published by Springer Nature in Journal of Bionic Engineering
- Vol. 20 (3) , 1083-1102
Analysis of Bio-inspired Fishbone Based Corrugated Rib for Adaptive Camber Morphing
- 10 January 2023
- Published by Springer Nature in Journal of Bionic Engineering
- Vol. 20 (3) , 1083-1102
Analysis of Bio-inspired Fishbone Based Corrugated Rib for Adaptive Camber Morphing
- 1 September 2022
- Published by Springer Nature in International Journal on Interactive Design and Manufacturing (IJIDeM)
- Vol. 16 (3) , 1273-1300
Enhancement of train braking efficiency by optimal flow control characteristics with aerodynamic braking system
- 1 September 2022
- Published by Springer Nature in International Journal on Interactive Design and Manufacturing (IJIDeM)
- Vol. 16 (3) , 1273-1300
Enhancement of train braking efficiency by optimal flow control characteristics with aerodynamic braking system
- 4 June 2022
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering
- Vol. 237 (3) , 561-586
Aerodynamic performance characterization of bio-inspired wings with leading edge tubercles at low Reynolds number
On the observation of biomimetic Humpback Whale (HW) flippers, the airfoil aerodynamic performance characteristics are explored. The Leading Edge (LE) tubercle geometry was inspired by the flipper of HW that has rounded LE protuberances and tapered trailing edge configurations. The tubercles have excellent flow control characteristics at the post-stall region. Aerodynamic characteristics of airfoils such as NACA0015 and NACA4415 with LE tubercles are experimentally and numerically investigated at the low Reynolds number about Re = 1.83 × 105. The bio-inspired modified airfoils (HUMP 0015 and 4415) are designed with the amplitude to wavelength ratio [ ] of 0.05. The numerical simulation over the modified airfoils shows that, at higher Angle of Attack the flow separation is delayed in the peak region whereas the early flow separation is observed in the trough region adjacent to the LE. The boundary layer flow separation analysis is done extensively through numerical simulations and the velocity vector profiles are captured at different chordwise positions. The stall delay phenomenon is observed through the outcome of this research that specifically insists at the peak region of tubercles. Computation of Coefficient of pressure [ ] distribution is also done by both numerical and wind tunnel experiments. Analysis of [ ] distribution allows the identification of critical regions that initiate the adverse pressure gradient and region of flow separation. It is a novel effort to predict the Coefficients of Lift [ ] and Drag [ ] concerning the bio-inspired airfoils through [ ] distribution such that the influence of flow separation and vortex distribution are characterized for the modified and baseline airfoils. Comparison of [ ], [ ], and [ ] between the baseline and modified airfoils reveal the enhanced momentum transfer characteristics of bio-inspired tubercles.
- 4 June 2022
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering
- Vol. 237 (3) , 561-586
Aerodynamic performance characterization of bio-inspired wings with leading edge tubercles at low Reynolds number
On the observation of biomimetic Humpback Whale (HW) flippers, the airfoil aerodynamic performance characteristics are explored. The Leading Edge (LE) tubercle geometry was inspired by the flipper of HW that has rounded LE protuberances and tapered trailing edge configurations. The tubercles have excellent flow control characteristics at the post-stall region. Aerodynamic characteristics of airfoils such as NACA0015 and NACA4415 with LE tubercles are experimentally and numerically investigated at the low Reynolds number about Re = 1.83 × 105. The bio-inspired modified airfoils (HUMP 0015 and 4415) are designed with the amplitude to wavelength ratio [ ] of 0.05. The numerical simulation over the modified airfoils shows that, at higher Angle of Attack the flow separation is delayed in the peak region whereas the early flow separation is observed in the trough region adjacent to the LE. The boundary layer flow separation analysis is done extensively through numerical simulations and the velocity vector profiles are captured at different chordwise positions. The stall delay phenomenon is observed through the outcome of this research that specifically insists at the peak region of tubercles. Computation of Coefficient of pressure [ ] distribution is also done by both numerical and wind tunnel experiments. Analysis of [ ] distribution allows the identification of critical regions that initiate the adverse pressure gradient and region of flow separation. It is a novel effort to predict the Coefficients of Lift [ ] and Drag [ ] concerning the bio-inspired airfoils through [ ] distribution such that the influence of flow separation and vortex distribution are characterized for the modified and baseline airfoils. Comparison of [ ], [ ], and [ ] between the baseline and modified airfoils reveal the enhanced momentum transfer characteristics of bio-inspired tubercles.
- 4 February 2022
- Published by Taylor & Francis
- p. 163-186
Application of Drones with Variable Area Nozzles for Effective Smart Farming Activities
Drone innovation is a sensational development that has the potential to change the standard manual farming activities into smart Internet of Things (IoT) enabled agriculture. Recently, the rural empowerment ventures proposed by the policymakers are focused on the effective utilization of unmanned aerial vehicles (UAV) to modernize agriculture activities across the globe. Drones are multi-rotor type UAVs having an inspirational framework with or without satellite routing and a fully developed Geographic Information System (GIS). The flight performance of the drones will be fully computerized with a high-resolution camera, master controller, and power systems based on the highlights of the application and payload requirements. The drones utilized for agrarian exercises are categorized as farming drones or agri-drones with certain unique characteristics such as special sensors, more powerful rotor systems, and digital imaging capabilities. Drones have revolutionized agriculture activities through a smart and swift survey of farmlands, crop health monitoring, pesticide spraying, livestock monitoring, and damage assessment in a cost-effective manner. However, the pesticide-spraying feature of drones is a crucial area because it creates adverse effects on the health of the farmers and crops if the volume of the fertilizer exceeds the allowable limits. Hence, a novel variable area nozzle (VAN) mechanism is proposed in this work to control the pesticide- and fertilizer-spraying process by using IoT-enabled sensors that offer better productivity, profitability, and a significant reduction in wastage. The key findings of the study are presented with the application IoT architecture of VAN and its feasibility for the extended smart farming activities.
- 4 February 2022
- Published by Taylor & Francis
- p. 163-186
Application of Drones with Variable Area Nozzles for Effective Smart Farming Activities
Drone innovation is a sensational development that has the potential to change the standard manual farming activities into smart Internet of Things (IoT) enabled agriculture. Recently, the rural empowerment ventures proposed by the policymakers are focused on the effective utilization of unmanned aerial vehicles (UAV) to modernize agriculture activities across the globe. Drones are multi-rotor type UAVs having an inspirational framework with or without satellite routing and a fully developed Geographic Information System (GIS). The flight performance of the drones will be fully computerized with a high-resolution camera, master controller, and power systems based on the highlights of the application and payload requirements. The drones utilized for agrarian exercises are categorized as farming drones or agri-drones with certain unique characteristics such as special sensors, more powerful rotor systems, and digital imaging capabilities. Drones have revolutionized agriculture activities through a smart and swift survey of farmlands, crop health monitoring, pesticide spraying, livestock monitoring, and damage assessment in a cost-effective manner. However, the pesticide-spraying feature of drones is a crucial area because it creates adverse effects on the health of the farmers and crops if the volume of the fertilizer exceeds the allowable limits. Hence, a novel variable area nozzle (VAN) mechanism is proposed in this work to control the pesticide- and fertilizer-spraying process by using IoT-enabled sensors that offer better productivity, profitability, and a significant reduction in wastage. The key findings of the study are presented with the application IoT architecture of VAN and its feasibility for the extended smart farming activities.
- 21 June 2021
- Published by Springer Nature in Reviews in Environmental Science and Bio/Technology
- Vol. 20 (3) , 645-677
Biomimetic flow control techniques for aerospace applications: a comprehensive review
- 21 June 2021
- Published by Springer Nature in Reviews in Environmental Science and Bio/Technology
- Vol. 20 (3) , 645-677
Biomimetic flow control techniques for aerospace applications: a comprehensive review