Ling Du
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Ling Du has a total of 39 co-authors. Here are the top co-authors by number of shared publications:
- Yufeng Guo
Nanjing University of Posts and Telecommunications
7 shared publications - Jiafei Yao
Nanjing University of Posts and Telecommunications
6 shared publications - Jun Zhang
College of Integrated Circuit Science and Engineering (College of Industry-Education Integration), Nanjing University of Posts and Telecommunications, Nanjing, China
6 shared publications Man Li
College of Integrated Circuit Science and Engineering, and the National and Local Joint Engineering Laboratory for RF Integration and Micro-Packaging Technologies, Nanjing University of Posts and Telecommunications, Nanjing, China
4 shared publications- Maolin Zhang
Nanjing University of Posts and Telecommunications
4 shared publications - Jianhua Liu
College of Integrated Circuit Science and Engineering, Nanjing University of Posts and Telecommunications, Nanjing 210023, China
3 shared publications
Latest Publications
- 11 August 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 72 (10) , 5571-5579
Threshold Voltage Stability of Copolymer-Based Lateral Drift Region Organic Field-Effect Transistors Under Ambient Air Conditions and Gate-Bias Stress
The impact of bias stability on the threshold voltage shift in copolymer lateral drift region organic field-effect transistors (LDR-OFETs) is examined. The fabricated LDR-OFETs feature a diketopyrrolopyrrole-based polymer (DPPT-TT) and a poly(methyl methacrylate) (PMMA) film as the semiconductor and gate dielectric layers, respectively. Under ambient air conditions, the LDR-OFETs maintain normal functionality without significant degradation for up to 4320 h of continuous exposure, demonstrating robust stability. However, LDR-OFETs under bias stress exhibit more pronounced degradation compared with those under atmospheric stress. Notably, negative and positive biases differently impact the threshold voltage shift, while their effect on breakdown voltage (BV) remains consistent. This distinct degradation behavior of copolymer-based LDR-OFETs is analyzed and elucidated, focusing on bias-stress effects. The trap state density between the organic dielectric layer and the organic semiconductor (OSC) layer is identified as a key factor contributing to the threshold voltage shift when subjected to electrical stress. The study highlights the exceptional resilience of fabricated copolymer OSC-based devices against degradation induced by ambient conditions and gate-bias stress, showcasing their potential for achieving reliable and commercially viable organic power devices.
- 11 August 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 72 (10) , 5571-5579
Threshold Voltage Stability of Copolymer-Based Lateral Drift Region Organic Field-Effect Transistors Under Ambient Air Conditions and Gate-Bias Stress
The impact of bias stability on the threshold voltage shift in copolymer lateral drift region organic field-effect transistors (LDR-OFETs) is examined. The fabricated LDR-OFETs feature a diketopyrrolopyrrole-based polymer (DPPT-TT) and a poly(methyl methacrylate) (PMMA) film as the semiconductor and gate dielectric layers, respectively. Under ambient air conditions, the LDR-OFETs maintain normal functionality without significant degradation for up to 4320 h of continuous exposure, demonstrating robust stability. However, LDR-OFETs under bias stress exhibit more pronounced degradation compared with those under atmospheric stress. Notably, negative and positive biases differently impact the threshold voltage shift, while their effect on breakdown voltage (BV) remains consistent. This distinct degradation behavior of copolymer-based LDR-OFETs is analyzed and elucidated, focusing on bias-stress effects. The trap state density between the organic dielectric layer and the organic semiconductor (OSC) layer is identified as a key factor contributing to the threshold voltage shift when subjected to electrical stress. The study highlights the exceptional resilience of fabricated copolymer OSC-based devices against degradation induced by ambient conditions and gate-bias stress, showcasing their potential for achieving reliable and commercially viable organic power devices.
- 5 August 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 69 (10) , 5595-5602
Synergetic Effect of Photoconductive Gain and Persistent Photocurrent in a High-Photoresponse Ga2O3Deep-Ultraviolet Photodetector
In this work, a metal–semiconductor–metal (MSM)$\beta $ -gallium oxide (Ga2O3) photodetector (PD) was constructed by microprocessing techniques, including UV photolithography, liftoff, and ion beam sputtering. The$\beta $ -Ga2O3 thin film was deposited on a sapphire substrate by a metalorganic chemical vapor deposition method. In addition to the high-quality thin film, the PD showed a photo-to-dark current ratio of$3.5\,\,{\times }\,\,10$ 7, a photoresponsivity of 509.78 A/W, a specific detectivity of$8.79\,\,{\times }\,\,10$ 14 Jones, an external quantum efficiency (EQE) of$2.5\,\,{\times }\,\,10$ 5%, and a linear dynamic range of 94.41 dB at 10 V with 254-nm UV light illumination. The PD photoconductive gain decreases with the incident light intensity and reaches up to 2490 under$2000 ~\mu \text{W}$ cm−2. Such high photoconductive gain due to recycling transport in the active layer may lead to persistent photocurrent. Together with high photoresponsivity and EQE, the substantial internal gain may well exist in the$\beta $ -Ga2O3 PD, suggesting a high deep-ultraviolet photoresponse for the$\beta $ -Ga2O3 MSM photodetector in this article.- 5 August 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 69 (10) , 5595-5602
Synergetic Effect of Photoconductive Gain and Persistent Photocurrent in a High-Photoresponse Ga2O3Deep-Ultraviolet Photodetector
In this work, a metal–semiconductor–metal (MSM)$\beta $ -gallium oxide (Ga2O3) photodetector (PD) was constructed by microprocessing techniques, including UV photolithography, liftoff, and ion beam sputtering. The$\beta $ -Ga2O3 thin film was deposited on a sapphire substrate by a metalorganic chemical vapor deposition method. In addition to the high-quality thin film, the PD showed a photo-to-dark current ratio of$3.5\,\,{\times }\,\,10$ 7, a photoresponsivity of 509.78 A/W, a specific detectivity of$8.79\,\,{\times }\,\,10$ 14 Jones, an external quantum efficiency (EQE) of$2.5\,\,{\times }\,\,10$ 5%, and a linear dynamic range of 94.41 dB at 10 V with 254-nm UV light illumination. The PD photoconductive gain decreases with the incident light intensity and reaches up to 2490 under$2000 ~\mu \text{W}$ cm−2. Such high photoconductive gain due to recycling transport in the active layer may lead to persistent photocurrent. Together with high photoresponsivity and EQE, the substantial internal gain may well exist in the$\beta $ -Ga2O3 PD, suggesting a high deep-ultraviolet photoresponse for the$\beta $ -Ga2O3 MSM photodetector in this article.- 15 December 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Electron Device Letters
- Vol. 43 (2) , 276-279
A 2.2kV Organic Semiconductor- Based Lateral Power Device
The application of organic field-effect transistors (OFETs) in the power device realm has not been explored yet. To achieve a high breakdown voltage, a novel lateral drift region OFET(LDR-OFET) is proposed in this letter. By employing the diketopyrrolopyrrole-based polymer(DPPT-TT) and Poly (methyl methacrylate) (PMMA) to form semiconductor and insulator layers respectively, the fabricated LDR-OFET, despite the simple process and low cost, exhibits an excellent off-state breakdown capability while maintaining a considerable on-state performance. With a $20~\mu \text{m}$ length of the drift region, the LDR-OFET realizes 2200V breakdown voltage on a spin-coated 50nm thick semiconductor layer. The average electric field of the proposed device reaches 1.18MV/cm before an avalanche-like breakdown occurs. The physical nature of the breakdown mechanism is explored using the 1-D PIN equivalent structure and avalanche breakdown theory. The correctness and effectiveness of the proposed LDR-OFET and breakdown analysis are well demonstrated and validated by experimental results. The LDR-OFETs are expected to fill the blank of organic power devices and be the core component of future organic power integrated circuits.
- 15 December 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Electron Device Letters
- Vol. 43 (2) , 276-279
A 2.2kV Organic Semiconductor- Based Lateral Power Device
The application of organic field-effect transistors (OFETs) in the power device realm has not been explored yet. To achieve a high breakdown voltage, a novel lateral drift region OFET(LDR-OFET) is proposed in this letter. By employing the diketopyrrolopyrrole-based polymer(DPPT-TT) and Poly (methyl methacrylate) (PMMA) to form semiconductor and insulator layers respectively, the fabricated LDR-OFET, despite the simple process and low cost, exhibits an excellent off-state breakdown capability while maintaining a considerable on-state performance. With a $20~\mu \text{m}$ length of the drift region, the LDR-OFET realizes 2200V breakdown voltage on a spin-coated 50nm thick semiconductor layer. The average electric field of the proposed device reaches 1.18MV/cm before an avalanche-like breakdown occurs. The physical nature of the breakdown mechanism is explored using the 1-D PIN equivalent structure and avalanche breakdown theory. The correctness and effectiveness of the proposed LDR-OFET and breakdown analysis are well demonstrated and validated by experimental results. The LDR-OFETs are expected to fill the blank of organic power devices and be the core component of future organic power integrated circuits.
- 8 December 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 69 (1) , 291-297
Field Plate-Adaptive Doping: A Novel Surface Electric Field Optimization Technique for SOI LDMOS With Gate Field Plate
The tradeoff between breakdown voltage (BV) and specific ON-resistance ( ${R}_{{\mathrm{\scriptscriptstyle ON},\text {sp}}}$ ) has always been the most crucial designing indicator to power devices. In this article, based on the effective concentration profile (ECP) concept, a novel field plate-adaptive doping (FAD) technique is proposed. Therefore, the benefits of the field plate (FP) structure and variation in lateral doping (VLD) technique are obtained simultaneously, while avoiding the inherent disadvantages of VLD and FP techniques. The new devices feature the gate FPs covering the part drift region with the FAD doping profile. The analytical model is therefore proposed to theoretically explore the breakdown mechanism. The good agreement between modeled and simulated results verifies the effectiveness of the FAD technique. The FAD achieves the advantages of low on-resistance and high BV by allowing a higher drift region doping concentration and suppressing the peak field at the FP side. Thus, compared with the FP and VLD, a better tradeoff between BV and ${R}_{{\mathrm{\scriptscriptstyle ON},\text {sp}}}$ can be obtained in the FAD lateral double-diffused metal–oxide–semiconductor (LDMOS).
- 8 December 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 69 (1) , 291-297
Field Plate-Adaptive Doping: A Novel Surface Electric Field Optimization Technique for SOI LDMOS With Gate Field Plate
The tradeoff between breakdown voltage (BV) and specific ON-resistance ( ${R}_{{\mathrm{\scriptscriptstyle ON},\text {sp}}}$ ) has always been the most crucial designing indicator to power devices. In this article, based on the effective concentration profile (ECP) concept, a novel field plate-adaptive doping (FAD) technique is proposed. Therefore, the benefits of the field plate (FP) structure and variation in lateral doping (VLD) technique are obtained simultaneously, while avoiding the inherent disadvantages of VLD and FP techniques. The new devices feature the gate FPs covering the part drift region with the FAD doping profile. The analytical model is therefore proposed to theoretically explore the breakdown mechanism. The good agreement between modeled and simulated results verifies the effectiveness of the FAD technique. The FAD achieves the advantages of low on-resistance and high BV by allowing a higher drift region doping concentration and suppressing the peak field at the FP side. Thus, compared with the FP and VLD, a better tradeoff between BV and ${R}_{{\mathrm{\scriptscriptstyle ON},\text {sp}}}$ can be obtained in the FAD lateral double-diffused metal–oxide–semiconductor (LDMOS).
- 1 December 2021
- Published by Elsevier in Superlattices and Microstructures
- Vol. 160
3-D analytical model of the high-voltage interconnection effect for SOI LDMOS
- 1 December 2021
- Published by Elsevier in Superlattices and Microstructures
- Vol. 160
3-D analytical model of the high-voltage interconnection effect for SOI LDMOS
- Open Access
- 18 September 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of the Electron Devices Society
- Vol. 8, 1031-1038
Analytical Study on the Breakdown Characteristics of Si-Substrated AlGaN/GaN HEMTs With Field Plates
The breakdown voltage model of Si-substrated AlGaN/GaN HEMTs with gate and drain field plates is proposed in this work. The silicon substrate and GaN buffer are considered as the depletion region in the modeling process. The analytical model shows great simplicity and veracity. It gives physical insights into the breakdown characteristics of the AlGaN/GaN HEMTs. The avalanche breakdown occurs at the field plate’s edge in lateral structure or at the interface in vertical structure. According to the analytical model, the relationship between the lateral breakdown and the vertical breakdown is demonstrated in this work. The breakdown location is affected by the variation of the structure parameters, including gate-to-drain distance, buffer thickness and field plates’ lengths. With the aid of the analytical model, effective guidance for device optimization to achieve high performance can be obtained.
- 18 September 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of the Electron Devices Society
- Vol. 8, 1031-1038
Open AccessAnalytical Study on the Breakdown Characteristics of Si-Substrated AlGaN/GaN HEMTs With Field Plates
The breakdown voltage model of Si-substrated AlGaN/GaN HEMTs with gate and drain field plates is proposed in this work. The silicon substrate and GaN buffer are considered as the depletion region in the modeling process. The analytical model shows great simplicity and veracity. It gives physical insights into the breakdown characteristics of the AlGaN/GaN HEMTs. The avalanche breakdown occurs at the field plate’s edge in lateral structure or at the interface in vertical structure. According to the analytical model, the relationship between the lateral breakdown and the vertical breakdown is demonstrated in this work. The breakdown location is affected by the variation of the structure parameters, including gate-to-drain distance, buffer thickness and field plates’ lengths. With the aid of the analytical model, effective guidance for device optimization to achieve high performance can be obtained.
- 6 March 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 67 (4) , 1745-1750
The New Structure and Analytical Model of a High-Voltage Interconnection Shielding Structure With High-k Dielectric Pillar
The high-voltage interconnection (HVI) effect induces electric field crowding near the source region of power lateral double diffused metal oxide semiconductor field effect transistors (LDMOSs) and, therefore, weakens its breakdown voltage (BV) characteristic. To suppress such a detrimental effect, a novel HVI structure with a high-k dielectric pillar beneath the HVI metal line is proposed. An analytical model is proposed to reveal the mechanism of the proposed structure and explain the effects of the parameters of the structure. The analytical model indicates that the high-k dielectric pillar eliminates the electric field crowding near the source, promotes the depletion of the drift region, and avoids the premature breakdown. Meanwhile, due to the existence of the high-k dielectric pillar, the surface electric field profile in the drift region can be modulated, and the influence of HVI can be effectively suppressed. Thus, a higher BV is obtained. The simulation results indicate that the proposed structure presents better BV, which is the same as that of the reduced surface field (RESURF) structure without HVI.
- 6 March 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 67 (4) , 1745-1750
The New Structure and Analytical Model of a High-Voltage Interconnection Shielding Structure With High-k Dielectric Pillar
The high-voltage interconnection (HVI) effect induces electric field crowding near the source region of power lateral double diffused metal oxide semiconductor field effect transistors (LDMOSs) and, therefore, weakens its breakdown voltage (BV) characteristic. To suppress such a detrimental effect, a novel HVI structure with a high-k dielectric pillar beneath the HVI metal line is proposed. An analytical model is proposed to reveal the mechanism of the proposed structure and explain the effects of the parameters of the structure. The analytical model indicates that the high-k dielectric pillar eliminates the electric field crowding near the source, promotes the depletion of the drift region, and avoids the premature breakdown. Meanwhile, due to the existence of the high-k dielectric pillar, the surface electric field profile in the drift region can be modulated, and the influence of HVI can be effectively suppressed. Thus, a higher BV is obtained. The simulation results indicate that the proposed structure presents better BV, which is the same as that of the reduced surface field (RESURF) structure without HVI.
- Open Access
- 1 January 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of the Electron Devices Society
- Vol. 8 (1) , 49-56
An Analytical Breakdown Model for the SOI LDMOS With Arbitrary Drift Doping Profile by Using Effective Substrate Voltage Method
- 1 January 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of the Electron Devices Society
- Vol. 8 (1) , 49-56
Open AccessAn Analytical Breakdown Model for the SOI LDMOS With Arbitrary Drift Doping Profile by Using Effective Substrate Voltage Method