Guanhu Wang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Guanhu Wang has a total of 5 co-authors. Here are the top co-authors by number of shared publications:
- Liangcai Cai
Department of Airport Construction Engineering, Air Force Engineering University
3 shared publications - Xingang Shi
Department of Airport Construction Engineering, Air Force Engineering University
3 shared publications - Lei Liang
Department of Airport Construction Engineering, Air Force Engineering University
2 shared publications - Chaomei Meng
Air Force Logistics Training Base, Taian, China
1 shared publication - Duoyao Zhang
Department of Airport Construction Engineering, Air Force Engineering University
1 shared publication
Latest Publications
- Open Access
- 9 April 2021
- Published by Czech Technical University in Prague - Central Library in Stavební obzor - Civil Engineering Journal
- Vol. 30 (1) , 63-77
TRAFFIC VOLUMES TEST OF AIRPORT RUNWAY
Currently, airport pavement design only considers the different horizontal standard deviation at the end and the middle of the runway, which had ignored the longitudinal distribution of airport runway traffic volume (ARTV). Especially for short take-off and landing aircraft, the take-off and landing distribution are not full of the whole runway. In allusion to the characteristics of ARTV, this paper developed a test system for the wheel track distribution and conducted a test of a short take-off and landing aircraft. Based on the statistics and analysis of test results, the horizontal and longitudinal distribution statistical laws of ARTV were obtained. At last, the longitudinal passage factor was proposed, and the planar distribution model was established to evaluate the ARTV at each point of the runway. By comparison with current design specifications, it is indicated that the pavement thickness will be designed more conservative without considering the planar distribution of traffic volumes.
- 9 April 2021
- Published by Czech Technical University in Prague - Central Library in Stavební obzor - Civil Engineering Journal
- Vol. 30 (1) , 63-77
Open AccessTRAFFIC VOLUMES TEST OF AIRPORT RUNWAY
Currently, airport pavement design only considers the different horizontal standard deviation at the end and the middle of the runway, which had ignored the longitudinal distribution of airport runway traffic volume (ARTV). Especially for short take-off and landing aircraft, the take-off and landing distribution are not full of the whole runway. In allusion to the characteristics of ARTV, this paper developed a test system for the wheel track distribution and conducted a test of a short take-off and landing aircraft. Based on the statistics and analysis of test results, the horizontal and longitudinal distribution statistical laws of ARTV were obtained. At last, the longitudinal passage factor was proposed, and the planar distribution model was established to evaluate the ARTV at each point of the runway. By comparison with current design specifications, it is indicated that the pavement thickness will be designed more conservative without considering the planar distribution of traffic volumes.
- Open Access
- 26 March 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 8, 61384-61394
Runway Width Design Based on Wheel Trace Distribution Test
The current runway width design in China was still according to the aircraft size and the accumulated experience in the flight process, and there is no clear calculation method. This paper proposed a new runway width design method based on the wheel traces distribution of the aircraft. A laser test system was developed to measure the aircraft wheel tracks of 17 cross sections along the runway at a feeder airport. The test results indicated that when aircraft takes off or lands, the transverse wheels traces obeyed a normal distribution. The variation curve in landing was selected to fit a numerical formula, which was used to calculate the maximum landing variation within the forward motion range, and the expression of the wheel trace transverse distribution on the section with the maximum discretization was determined. At last, a failure probability of 0.0001% was chosen as the criterion to determine the runway width. It was showed that B737-30 should have at least 45 m width to ensure the 0.0001 % failure probability.
- 26 March 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 8, 61384-61394
Open AccessRunway Width Design Based on Wheel Trace Distribution Test
The current runway width design in China was still according to the aircraft size and the accumulated experience in the flight process, and there is no clear calculation method. This paper proposed a new runway width design method based on the wheel traces distribution of the aircraft. A laser test system was developed to measure the aircraft wheel tracks of 17 cross sections along the runway at a feeder airport. The test results indicated that when aircraft takes off or lands, the transverse wheels traces obeyed a normal distribution. The variation curve in landing was selected to fit a numerical formula, which was used to calculate the maximum landing variation within the forward motion range, and the expression of the wheel trace transverse distribution on the section with the maximum discretization was determined. At last, a failure probability of 0.0001% was chosen as the criterion to determine the runway width. It was showed that B737-30 should have at least 45 m width to ensure the 0.0001 % failure probability.
- Open Access
- 8 January 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 8, 10070-10087
A New Aircraft Taxiing Model Based on Filtering White Noise Method
The conversion relationship between power spectral density (PSD) and international roughness index (IRI) was studied based on the filtering white noise method with variable sampling frequency using a quarter vehicle model. Six-degree-of-freedom dynamic equations of the whole aircraft taxiing were obtained considering the lift, upstream and downward bump, roll and pitch motion of the airframe. And then the dynamic load factors of the aircraft wheels under different pavement roughness and various airspeeds were solved by SIMULINK toolbox. The results shown that the mean dynamic load is independent of the pavement roughness, whose values are approximately equal to the load when the aircraft glided on the smooth pavement. The worse the pavement roughness, the greater the maximum dynamic load factor. There are approximately linear relationships between IRI and the maximum dynamic load. When the aircraft glides at low airspeed, the dynamic load increases as the increasing of airspeed. Then the maximum dynamic load factor decreases with the increase of running velocity. Moreover, the formulas for calculating the wheel dynamic load factor under the coupling action of pavement roughness and airspeed were proposed, which could be used to calculated the distribution of the dynamic load in longitudinal direction of the runway and determine the dynamic load values in airport pavement design.
- 8 January 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 8, 10070-10087
Open AccessA New Aircraft Taxiing Model Based on Filtering White Noise Method
The conversion relationship between power spectral density (PSD) and international roughness index (IRI) was studied based on the filtering white noise method with variable sampling frequency using a quarter vehicle model. Six-degree-of-freedom dynamic equations of the whole aircraft taxiing were obtained considering the lift, upstream and downward bump, roll and pitch motion of the airframe. And then the dynamic load factors of the aircraft wheels under different pavement roughness and various airspeeds were solved by SIMULINK toolbox. The results shown that the mean dynamic load is independent of the pavement roughness, whose values are approximately equal to the load when the aircraft glided on the smooth pavement. The worse the pavement roughness, the greater the maximum dynamic load factor. There are approximately linear relationships between IRI and the maximum dynamic load. When the aircraft glides at low airspeed, the dynamic load increases as the increasing of airspeed. Then the maximum dynamic load factor decreases with the increase of running velocity. Moreover, the formulas for calculating the wheel dynamic load factor under the coupling action of pavement roughness and airspeed were proposed, which could be used to calculated the distribution of the dynamic load in longitudinal direction of the runway and determine the dynamic load values in airport pavement design.