Goran Panic
Research Subjects
Goran Panic has a total of 28 co-authors. Here are the top co-authors by number of shared publications:
- Lukasz Lopacinski
Leibniz-Institut fr Innovative Mikroelektronik (IHP), Frankfurt an der Oder, Germany
6 shared publications - Nebojsa Maletic
IHP-Leibniz-Institut fr innovative Mikroelektronik, Frankfurt (Oder), Germany
5 shared publications - Eckhard Grass
Computer Science Department, Humboldt University of Berlin, Berlin, Germany
4 shared publications - Alireza Hasani
IHP Leibniz-Institut fr innovative Mikroelektronik,Frankfurt Oder,Germany
3 shared publications - Milos Krstic
IHPLeibniz-Institut fr innovative Mikroelektronik, Frankfurt (Oder), Germany
3 shared publications - Andrea Malignaggi
IHPLeibniz Institute for High Performance Microelectronics Frankfurt (Oder), Frankfurt, Germany
2 shared publications
Latest Publications
- 9 June 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-5
Green ICT - Measurement Hubs and Testbeds for mm-Wave and sub-THz Communication Devices
This paper presents the activities of IHP within the Green ICT project, which aims to provide measurement centers and testbeds to collect data relevant for the life cycle assessment of millimeter-wave and sub-THz communication devices. These include the setup of an anechoic chamber and a near-field scanner for the characterization of radios and antennas, as well as the construction of a standalone 5 G testbed for real-time outdoor experiments on fronthaul and backhaul data links. The installed measurement infrastructure was validated by measurements on reference designs.
- 9 June 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-5
Green ICT - Measurement Hubs and Testbeds for mm-Wave and sub-THz Communication Devices
This paper presents the activities of IHP within the Green ICT project, which aims to provide measurement centers and testbeds to collect data relevant for the life cycle assessment of millimeter-wave and sub-THz communication devices. These include the setup of an anechoic chamber and a near-field scanner for the characterization of radios and antennas, as well as the construction of a standalone 5 G testbed for real-time outdoor experiments on fronthaul and backhaul data links. The installed measurement infrastructure was validated by measurements on reference designs.
- 3 October 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-6
High-Speed SC Decoder for Polar Codes achieving 1.7 Tb/s in 28 nm CMOS
This paper compares three hardware variants of successive cancelation (SC) decoders for polar codes. The fastest implementation, based on the basic SC, provides decoding throughput up to 1700 Gb/s, when implemented in a 28 nm CMOS technology at the worst-case timing corner. This is the fastest polar decoder published so far, to the best of our knowledge. We also discuss the difficulties of implementing single-parity-check nodes and repetition nodes in fast simplified SC (Fast-SSC) decoding algorithm. These two node types are the primary sources of clock frequency reduction, and special care needs to be taken when these elements are implemented. The Fast-SSC decoder requires ~3 times fewer hardware resources than the base version of SC, but achieves ~10% lower decoding throughput.
- 3 October 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-6
High-Speed SC Decoder for Polar Codes achieving 1.7 Tb/s in 28 nm CMOS
This paper compares three hardware variants of successive cancelation (SC) decoders for polar codes. The fastest implementation, based on the basic SC, provides decoding throughput up to 1700 Gb/s, when implemented in a 28 nm CMOS technology at the worst-case timing corner. This is the fastest polar decoder published so far, to the best of our knowledge. We also discuss the difficulties of implementing single-parity-check nodes and repetition nodes in fast simplified SC (Fast-SSC) decoding algorithm. These two node types are the primary sources of clock frequency reduction, and special care needs to be taken when these elements are implemented. The Fast-SSC decoder requires ~3 times fewer hardware resources than the base version of SC, but achieves ~10% lower decoding throughput.
- Open Access
- 14 January 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 10, 8673-8692
Real-Valued Spreading Sequences for PSSS Based High-Speed Wireless Systems
In past years, Parallel Sequence Spread Spectrum (PSSS) has attracted significant attention as a modulation technique for wireless communication systems targeting data rates of 100 Gb/s and beyond. PSSS allows designing high-speed baseband processors, which can be partially implemented in the analog domain. It uses multiple analog-to-digital converters (ADCs) to sample the received baseband signal in parallel, significantly relaxing the sampling rate and ADC complexity. However, due to the sidelobe effects of bipolar $m$ -sequences, PSSS shows lower performance than standard digital modulation schemes. This paper proposes real-valued PSSS spreading sequences with attenuated autocorrelation sidelobes. Such sequences show excellent bit error rate (BER) performance. Moreover, our sequences do not have length restrictions of 2 m – 1, like in the case of $m$ -sequences, and reduce the chip area required to implement PSSS transceiver. The proposed sequences also reduce the peak-to-average power ratio (PAPR) of PSSS.
- 14 January 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 10, 8673-8692
Open AccessReal-Valued Spreading Sequences for PSSS Based High-Speed Wireless Systems
In past years, Parallel Sequence Spread Spectrum (PSSS) has attracted significant attention as a modulation technique for wireless communication systems targeting data rates of 100 Gb/s and beyond. PSSS allows designing high-speed baseband processors, which can be partially implemented in the analog domain. It uses multiple analog-to-digital converters (ADCs) to sample the received baseband signal in parallel, significantly relaxing the sampling rate and ADC complexity. However, due to the sidelobe effects of bipolar $m$ -sequences, PSSS shows lower performance than standard digital modulation schemes. This paper proposes real-valued PSSS spreading sequences with attenuated autocorrelation sidelobes. Such sequences show excellent bit error rate (BER) performance. Moreover, our sequences do not have length restrictions of 2 m – 1, like in the case of $m$ -sequences, and reduce the chip area required to implement PSSS transceiver. The proposed sequences also reduce the peak-to-average power ratio (PAPR) of PSSS.
- Open Access
- 7 January 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 10, 5378-5389
High-Throughput Multi-Frame Decoding of QC-LDPC Codes With Modified Rejection-Based Minimum Finding
The key computation in the min-sum decoding algorithm of a Low-Density Parity-Check (LDPC) is finding the first two minima and also the location of the first minimum among a set of messages passed from Variable Nodes (VNs) to Check Nodes (CNs) in a Tanner graph. In this paper, we propose a modified rejection-based scheme for this task which is able to find the one-hot sequence of the minimum location instead of its index. We show that this modification effectively reduces the complexity of min-sum decoding algorithm. Additionally, we reveal a pipelining potential in such a rejection-based architecture which facilitates the multi-frame decoding of Low-Density Parity-Check (LDPC) codes and therefore results in an improvement in decoding throughput with bearable hardware overhead. Synthesis and floorplanning in an industrial 28 nm CMOS technology show improved results in terms of throughput, power, and chip area.
- 7 January 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 10, 5378-5389
Open AccessHigh-Throughput Multi-Frame Decoding of QC-LDPC Codes With Modified Rejection-Based Minimum Finding
The key computation in the min-sum decoding algorithm of a Low-Density Parity-Check (LDPC) is finding the first two minima and also the location of the first minimum among a set of messages passed from Variable Nodes (VNs) to Check Nodes (CNs) in a Tanner graph. In this paper, we propose a modified rejection-based scheme for this task which is able to find the one-hot sequence of the minimum location instead of its index. We show that this modification effectively reduces the complexity of min-sum decoding algorithm. Additionally, we reveal a pipelining potential in such a rejection-based architecture which facilitates the multi-frame decoding of Low-Density Parity-Check (LDPC) codes and therefore results in an improvement in decoding throughput with bearable hardware overhead. Synthesis and floorplanning in an industrial 28 nm CMOS technology show improved results in terms of throughput, power, and chip area.
- 23 November 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-4
A D-Band Radio Module for Hybrid-Beamforming MIMO Communication and Localization
This paper presents a conceptual view and analysis of a D-Band radio module currently under development in the 6GKom project. The envisioned RF transceiver module is a highly modular unit supporting different MIMO (Multiple Input Multiple Output) configurations. The architecture of the target module, based on a FOWLP (Fan-Out Wafer Level Packaging) technology, which integrates SiGe-based phased-array radio chip and an integrated antenna array, is presented in this work. Also, the paper provides the analysis of the link budget for the envisioned system and discusses the capabilities of the system related to ranging and localization applications.
- 23 November 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-4
A D-Band Radio Module for Hybrid-Beamforming MIMO Communication and Localization
This paper presents a conceptual view and analysis of a D-Band radio module currently under development in the 6GKom project. The envisioned RF transceiver module is a highly modular unit supporting different MIMO (Multiple Input Multiple Output) configurations. The architecture of the target module, based on a FOWLP (Fan-Out Wafer Level Packaging) technology, which integrates SiGe-based phased-array radio chip and an integrated antenna array, is presented in this work. Also, the paper provides the analysis of the link budget for the envisioned system and discusses the capabilities of the system related to ranging and localization applications.
- 27 September 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Microwave Theory and Techniques
- Vol. 68 (1) , 239-251
Frequency Interleaving IF Transmitter and Receiver for 240-GHz Communication in SiGe:C BiCMOS
This article presents a fully integrated modular wideband frequency interleaving (FI) transmitter and receiver for high data rate communication applications. At the transmitter side, three independent in-phase and quadrature-phase (IQ) baseband channels are upconverted to different intermediate frequencies (IFs) and then interleaved. At the receiver side, the interleaved signals are downconverted and separated back to each independent channel. Single-ended inputs and outputs are utilized to reduce the pin count, for a more practical realization and higher potential toward future system scaling. Special design techniques are followed to minimize crosstalk and intermodulation products between the channels. All circuits are manufactured and measured in a 130-nm SiGe:C BiCMOS technology with fT,/,fmax,=,300/500 GHz. The FI transmitter achieves a channel bandwidth of 2.5 GHz with less than 3-dB difference across different channels until 15-GHz IF. It consumes 560 mW from 2.5 and 3.3 V supplies and occupies a silicon area of 1.9 mm². The FI receiver achieves a baseband channel bandwidth of 2.5 GHz with a 1-dB difference between the channels until the same IF. It consumes 860 mW from 2.5 and 3.3 V supplies and has a chip area of 1.55 mm². The circuits are deployed in a communication experiment; first, in a back-to-back test with a direct cable connection, demonstrating a data rate of 15.6 Gb/s across the three IQ channels with a 16-QAM modulation scheme and a worst case transmitter-to-receiver error vector magnitude (EVM) of -18.6 dB. Then, a wireless experiment is performed with a 240-GHz front end with on-chip antenna, demonstrating a data rate of 7.8 Gb/s with QPSK modulation and a worst case EVM of -8.3 dB, across a wireless link of 15 cm. To the best of our knowledge, this is the first article that demonstrates a wireless transmission at sub-terahertz (sub-THz) carrier frequencies utilizing FI architectures.
- 27 September 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Microwave Theory and Techniques
- Vol. 68 (1) , 239-251
Frequency Interleaving IF Transmitter and Receiver for 240-GHz Communication in SiGe:C BiCMOS
This article presents a fully integrated modular wideband frequency interleaving (FI) transmitter and receiver for high data rate communication applications. At the transmitter side, three independent in-phase and quadrature-phase (IQ) baseband channels are upconverted to different intermediate frequencies (IFs) and then interleaved. At the receiver side, the interleaved signals are downconverted and separated back to each independent channel. Single-ended inputs and outputs are utilized to reduce the pin count, for a more practical realization and higher potential toward future system scaling. Special design techniques are followed to minimize crosstalk and intermodulation products between the channels. All circuits are manufactured and measured in a 130-nm SiGe:C BiCMOS technology with fT,/,fmax,=,300/500 GHz. The FI transmitter achieves a channel bandwidth of 2.5 GHz with less than 3-dB difference across different channels until 15-GHz IF. It consumes 560 mW from 2.5 and 3.3 V supplies and occupies a silicon area of 1.9 mm². The FI receiver achieves a baseband channel bandwidth of 2.5 GHz with a 1-dB difference between the channels until the same IF. It consumes 860 mW from 2.5 and 3.3 V supplies and has a chip area of 1.55 mm². The circuits are deployed in a communication experiment; first, in a back-to-back test with a direct cable connection, demonstrating a data rate of 15.6 Gb/s across the three IQ channels with a 16-QAM modulation scheme and a worst case transmitter-to-receiver error vector magnitude (EVM) of -18.6 dB. Then, a wireless experiment is performed with a 240-GHz front end with on-chip antenna, demonstrating a data rate of 7.8 Gb/s with QPSK modulation and a worst case EVM of -8.3 dB, across a wireless link of 15 cm. To the best of our knowledge, this is the first article that demonstrates a wireless transmission at sub-terahertz (sub-THz) carrier frequencies utilizing FI architectures.
- 1 May 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-3
Modular Wideband 1–15 GHz Transmitter Channelizer for High Data Rate Communication
This work presents a modular wideband transmitter channelizer for high data rate communication applications, manufactured in a 130 nm SiGe:C BiCMOS technology with fT/f max = 300/500 GHz. Three independent I/Q baseband signals are upconverted to different intermediate frequencies and then bonded in current domain. A local oscillator leakage cancellation functionality is implemented on chip within the input stage to enhance the dynamic range. Single ended inputs were utilized in order to reduce the pin count, for a more practical realization and higher potential toward future system scaling. The transmitter channelizer achieves an output 3-dB bandwidth of 15 GHz. LO rejection of 74 dBc at the center frequency was measured after calibration. It dissipates 355 m W and occupies 1.5 mm 2 . With these specifications the presented circuitry suits well as a practical solution for wideband channelization for high data rate transmission scenario's, such as THz and sub-THz communications applications, with a potential scaling-up to higher number of channels.
- 1 May 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-3
Modular Wideband 1–15 GHz Transmitter Channelizer for High Data Rate Communication
This work presents a modular wideband transmitter channelizer for high data rate communication applications, manufactured in a 130 nm SiGe:C BiCMOS technology with fT/f max = 300/500 GHz. Three independent I/Q baseband signals are upconverted to different intermediate frequencies and then bonded in current domain. A local oscillator leakage cancellation functionality is implemented on chip within the input stage to enhance the dynamic range. Single ended inputs were utilized in order to reduce the pin count, for a more practical realization and higher potential toward future system scaling. The transmitter channelizer achieves an output 3-dB bandwidth of 15 GHz. LO rejection of 74 dBc at the center frequency was measured after calibration. It dissipates 355 m W and occupies 1.5 mm 2 . With these specifications the presented circuitry suits well as a practical solution for wideband channelization for high data rate transmission scenario's, such as THz and sub-THz communications applications, with a potential scaling-up to higher number of channels.