Hao Xiong
Research Subjects
Research Interests
Hao Xiong has a total of 22 co-authors. Here are the top co-authors by number of shared publications:
Botao Kang
School of Energy Resources, China University of Geosciences, Beijing 100083, China
2 shared publicationsDeepak Devegowda
Mewbourne School of Petroleum and Geological Engineering The University of Oklahoma Norman Oklahoma USA
2 shared publications- Liangliang Huang
University of Oklahoma
2 shared publications Zhiwang Yuan
CNOOC Research Institute Ltd., Beijing 100028,China
2 shared publications- Gaoqiang Ma
Research Institute of Petroleum Exploration and Development, CNPC Key Laboratory of Oil and Gas Recovery, Beijing City, 100083, China.
1 shared publication - Guoqing Han
College of Petroleum Engineering, China University of Petroleum, Beijing 102249, China
1 shared publication
Latest Publications
- Open Access
- 2 August 2024
- Published by American Chemical Society (ACS) in ACS Omega
- Vol. 9 (32) , 34345-34357
Refined Prediction Method for Production Performance of Deep-Water Turbidite Sandstone Oilfield: A Case Study of AKPO in Niger Delta Basin, West Africa
Deep-water oilfields frequently employ large or superlarge well spacing, leading to significant production dynamics influenced by reservoir factors. Traditional methodologies often disregard these influences, resulting in poor accuracy. Therefore, an enhanced prediction methodology rooted in reservoir characteristics is proposed. This approach introduces the dynamic relative permeability law as a bridge, capturing macroscopic oil/water movement within the reservoir. For the first time, it integrates production dynamics with key controlling reservoir factors, encompassing reservoir architecture, injection-production connectivity, and reservoir heterogeneity. The results indicate that (1) In deep-water turbidite sandstone fields with ultralarge injector-producer well spacings, the distribution of oil-water movement is primarily influenced by reservoir connectivity and heterogeneity. The injection water sweeping ability coefficient can quantitatively describe the water flooding capacity, with a strong negative correlation between the injection water sweeping ability coefficient and interwell nonconnectivity coefficient and reservoir homogeneity coefficient. This suggests that better reservoir connectivity or weaker heterogeneity results in stronger water flooding capacity, leading to a wider range of water flooding under the same injection volume. (2) For regions with strong water flooding capacity (injection water sweeping ability coefficient 0.30-0.80), the water-free production period is the main production stage, with a focus on improving the planar flooding conditions. For regions with poor water flooding capacity (injection water sweeping ability coefficient 0.00-0.10), the middle and late water-cut periods are the main production stages, with a focus on improving interlayer dynamic differences in the later stages. For regions with moderate water flooding capacity (injection water sweeping ability coefficient 0.10-0.30), the initial focus should be on expanding planar flooding, followed by a focus on improving interlayer dynamic differences in the later stages. (3) The dynamic relative permeability law, capable of comprehensively portraying the reservoir's influence on macroscopic oil/water movement, emerges as a rational choice for production performance prediction in such contexts. Our method can improve the accuracy, compared with traditional method without geographical factors, from 45% to 90% during water-cut rising stage and 31% to 81% during production declining stage. The high prediction accuracy (90%) observed in the AKPO oilfields underscores the method's efficacy in directing on-site optimization and adjustments for the development of deep-water turbidite sandstone oilfields.
- 2 August 2024
- Published by American Chemical Society (ACS) in ACS Omega
- Vol. 9 (32) , 34345-34357
Open AccessRefined Prediction Method for Production Performance of Deep-Water Turbidite Sandstone Oilfield: A Case Study of AKPO in Niger Delta Basin, West Africa
Deep-water oilfields frequently employ large or superlarge well spacing, leading to significant production dynamics influenced by reservoir factors. Traditional methodologies often disregard these influences, resulting in poor accuracy. Therefore, an enhanced prediction methodology rooted in reservoir characteristics is proposed. This approach introduces the dynamic relative permeability law as a bridge, capturing macroscopic oil/water movement within the reservoir. For the first time, it integrates production dynamics with key controlling reservoir factors, encompassing reservoir architecture, injection-production connectivity, and reservoir heterogeneity. The results indicate that (1) In deep-water turbidite sandstone fields with ultralarge injector-producer well spacings, the distribution of oil-water movement is primarily influenced by reservoir connectivity and heterogeneity. The injection water sweeping ability coefficient can quantitatively describe the water flooding capacity, with a strong negative correlation between the injection water sweeping ability coefficient and interwell nonconnectivity coefficient and reservoir homogeneity coefficient. This suggests that better reservoir connectivity or weaker heterogeneity results in stronger water flooding capacity, leading to a wider range of water flooding under the same injection volume. (2) For regions with strong water flooding capacity (injection water sweeping ability coefficient 0.30-0.80), the water-free production period is the main production stage, with a focus on improving the planar flooding conditions. For regions with poor water flooding capacity (injection water sweeping ability coefficient 0.00-0.10), the middle and late water-cut periods are the main production stages, with a focus on improving interlayer dynamic differences in the later stages. For regions with moderate water flooding capacity (injection water sweeping ability coefficient 0.10-0.30), the initial focus should be on expanding planar flooding, followed by a focus on improving interlayer dynamic differences in the later stages. (3) The dynamic relative permeability law, capable of comprehensively portraying the reservoir's influence on macroscopic oil/water movement, emerges as a rational choice for production performance prediction in such contexts. Our method can improve the accuracy, compared with traditional method without geographical factors, from 45% to 90% during water-cut rising stage and 31% to 81% during production declining stage. The high prediction accuracy (90%) observed in the AKPO oilfields underscores the method's efficacy in directing on-site optimization and adjustments for the development of deep-water turbidite sandstone oilfields.
- 13 March 2024
- Published by American Chemical Society (ACS) in Energy & Fuels
- Vol. 38 (7) , 5766-5776
Factor Analysis and Prediction on Recovery Efficiency in Offshore Sandstone Reservoirs with Thick–Thin Interbedding
- 13 March 2024
- Published by American Chemical Society (ACS) in Energy & Fuels
- Vol. 38 (7) , 5766-5776
Factor Analysis and Prediction on Recovery Efficiency in Offshore Sandstone Reservoirs with Thick–Thin Interbedding
- Open Access
Evaluating the Reliability of AlphaFold 2 for Unknown Complex Structures with Deep Learning
Recently released AlphaFold 2 shows a high accuracy when predicting most of the well- structured single protein chains, and subsequent works have also shown that providing pseudo-multimer inputs to the single-chain AlphaFold 2 can predict complex interactions among which the accuracy of predicted complexes can be easily determined by ground truth structures. However, for unknown complex structures without homologs, how to evaluate the reliability of the predicted structures remains a major challenge. Here, we have developed AlphaFold-Eva, a deep learning-based method that learns geometry information from complex structures to evaluate AlphaFold 2. Using different types of sub-complexes of the central apparatus and recently released PDB data, we demonstrate that the reliability of unknown complex structures predicted by AlphaFold 2 is significantly affected by surface ratio, contact surface and dimension ratio. Our findings suggest that the reliability of predicted structures can be directly learned from the intrinsic structural information itself. Therefore, AlphaFold-Eva provides a promising solution to quantitatively validate the predicted structures of unknown complexes, even without a reference.
Open AccessEvaluating the Reliability of AlphaFold 2 for Unknown Complex Structures with Deep Learning
Recently released AlphaFold 2 shows a high accuracy when predicting most of the well- structured single protein chains, and subsequent works have also shown that providing pseudo-multimer inputs to the single-chain AlphaFold 2 can predict complex interactions among which the accuracy of predicted complexes can be easily determined by ground truth structures. However, for unknown complex structures without homologs, how to evaluate the reliability of the predicted structures remains a major challenge. Here, we have developed AlphaFold-Eva, a deep learning-based method that learns geometry information from complex structures to evaluate AlphaFold 2. Using different types of sub-complexes of the central apparatus and recently released PDB data, we demonstrate that the reliability of unknown complex structures predicted by AlphaFold 2 is significantly affected by surface ratio, contact surface and dimension ratio. Our findings suggest that the reliability of predicted structures can be directly learned from the intrinsic structural information itself. Therefore, AlphaFold-Eva provides a promising solution to quantitatively validate the predicted structures of unknown complexes, even without a reference.
- Open Access
- 17 November 2020
- Published by Hindawi Limited in Geofluids
- Vol. 2020, 1-12
A Semianalytical Coupling Model between Reservoir and Horizontal Well with Different Well Completions
Although currently, large-scale and multilateral horizontal wells are an important way to improve the oil recovery in the unconventional reservoirs, the flow behavior of fluid from the reservoir into the horizontal wellbore becomes more challenged compared to the single small-scale horizontal well. One of the main challenges is that pressure loss from the well completion section and wellbore cannot be ignored in the coupling process between the reservoir and the horizontal well. In this paper, a new method is presented to solve the coupling flow between the reservoir and the horizontal well with different well completions. The new coupling model is compared with Ouyang’s model (1998) and Penmatcha’s model (1997), and the predicted data are consistent with each other at both early and late times. Meanwhile, four different cases have been proposed to verify the application of the new coupling model with different well completions, and the results indicate that the uneven inflow profile can be effectively alleviated via reasonable completion parameters and different well completions. Based on two types of flow-node units, it can quickly model and solve the coupling problem between the reservoir and the horizontal well with complex completion cases. It can also depict the inflow profile of the horizontal well with different well completions, which is conducive to understand the coupling process. The new coupling model can provide theoretical support for further optimization of completion parameters and well completions and finally improve oil recovery.
- 17 November 2020
- Published by Hindawi Limited in Geofluids
- Vol. 2020, 1-12
Open AccessA Semianalytical Coupling Model between Reservoir and Horizontal Well with Different Well Completions
Although currently, large-scale and multilateral horizontal wells are an important way to improve the oil recovery in the unconventional reservoirs, the flow behavior of fluid from the reservoir into the horizontal wellbore becomes more challenged compared to the single small-scale horizontal well. One of the main challenges is that pressure loss from the well completion section and wellbore cannot be ignored in the coupling process between the reservoir and the horizontal well. In this paper, a new method is presented to solve the coupling flow between the reservoir and the horizontal well with different well completions. The new coupling model is compared with Ouyang’s model (1998) and Penmatcha’s model (1997), and the predicted data are consistent with each other at both early and late times. Meanwhile, four different cases have been proposed to verify the application of the new coupling model with different well completions, and the results indicate that the uneven inflow profile can be effectively alleviated via reasonable completion parameters and different well completions. Based on two types of flow-node units, it can quickly model and solve the coupling problem between the reservoir and the horizontal well with complex completion cases. It can also depict the inflow profile of the horizontal well with different well completions, which is conducive to understand the coupling process. The new coupling model can provide theoretical support for further optimization of completion parameters and well completions and finally improve oil recovery.
- 19 May 2020
- Published by Wiley in AIChE Journal
- Vol. 66 (8)
Oil–water transport in clay‐hosted nanopores: Effects of long‐range electrostatic forces
Charged clay surfaces can impact the storage and mobility of hydrocarbon and water mixtures. Here, we use equilibrium molecular dynamics (MD) and nonequilibrium MD simulations to investigate hydrocarbon‐water mixtures and their transport in slit‐shaped illite nanopores. We construct two illite pore models with different surface chemistries: potassium–hydroxyl (PH) and hydroxyl–hydroxyl (HH) structures. In HH nanopore, we observe water adsorption on the clay surfaces. In PH nanopores, however, we observe the formation of water bridges because of the existence of a local, long‐range electric field. Our NEMD simulations demonstrate that the velocity profiles across the pore depend strongly on water concentration, pore width and the presence or absence of the water bridge. This fundamental study provides a theoretical basis for understanding nanofluidics with charged surfaces and can be applied in such as biological processes, chemical and physical fields, and the oil and gas extraction in clay‐rich formations.
- 19 May 2020
- Published by Wiley in AIChE Journal
- Vol. 66 (8)
Oil–water transport in clay‐hosted nanopores: Effects of long‐range electrostatic forces
Charged clay surfaces can impact the storage and mobility of hydrocarbon and water mixtures. Here, we use equilibrium molecular dynamics (MD) and nonequilibrium MD simulations to investigate hydrocarbon‐water mixtures and their transport in slit‐shaped illite nanopores. We construct two illite pore models with different surface chemistries: potassium–hydroxyl (PH) and hydroxyl–hydroxyl (HH) structures. In HH nanopore, we observe water adsorption on the clay surfaces. In PH nanopores, however, we observe the formation of water bridges because of the existence of a local, long‐range electric field. Our NEMD simulations demonstrate that the velocity profiles across the pore depend strongly on water concentration, pore width and the presence or absence of the water bridge. This fundamental study provides a theoretical basis for understanding nanofluidics with charged surfaces and can be applied in such as biological processes, chemical and physical fields, and the oil and gas extraction in clay‐rich formations.
- 7 January 2020
- Published by American Chemical Society (ACS) in Langmuir
- Vol. 36 (3) , 723-733
Water Bridges in Clay Nanopores: Mechanisms of Formation and Impact on Hydrocarbon Transport
Clays are prevalent in earth’s crust and usually deposited in the presence of water. An unusual finding in clays is that under certain conditions, water molecules can collectively form a bridge across a clay-hosted pore. However, there are relatively few studies focused on the formation mechanism of water bridge in clay nanopores. In this work, we use molecular dynamics simulations to investigate the formation of the water bridge and its influence on fluid transport in slit-shaped illite nanopores. Two different basal illite surface chemistries are constructed: potassium-hydroxyl (P-H) and hydroxyl-hydroxyl (H-H) structure. Because pore size and water concentration are expected to control the formation of water bridge, our simulations span a wide range of pore sizes and water concentrations. Generally, positive potassium layers and negative hydroxyl groups in P-H nanopore can induce partial charges which in return produce instant and local electric fields, favoring the formation of water bridge. In P-H nanopores, water bridge happens at a relatively low water concentration. However, in H-H nanopores water bridge only forms at high water concentrations. Additionally, smaller pore sizes favor the formation of water bridges. However, the presence of an electric field promotes the formation of a water bridge even in larger pore sizes in P-H pores. The results also indicate that in both P-H and H-H nanopores, water adsorption films initially create a smooth surface to promote hydrocarbon flow. In P-H nanopores, further increases in the water concentration causes a sharp decline in the self-diffusion coefficients of hydrocarbon and water due to the formation of water bridge. The presence of electric fields in P-H pores can however weaken the confinement effect of illite and promote hydrocarbon flow. In contrast, in H-H nanopores, the self-diffusion coefficients decline slowly with the increase of water concentration. This is because no water bridge is formed at low water concentrations in H-H nanopores.
- 7 January 2020
- Published by American Chemical Society (ACS) in Langmuir
- Vol. 36 (3) , 723-733
Water Bridges in Clay Nanopores: Mechanisms of Formation and Impact on Hydrocarbon Transport
Clays are prevalent in earth’s crust and usually deposited in the presence of water. An unusual finding in clays is that under certain conditions, water molecules can collectively form a bridge across a clay-hosted pore. However, there are relatively few studies focused on the formation mechanism of water bridge in clay nanopores. In this work, we use molecular dynamics simulations to investigate the formation of the water bridge and its influence on fluid transport in slit-shaped illite nanopores. Two different basal illite surface chemistries are constructed: potassium-hydroxyl (P-H) and hydroxyl-hydroxyl (H-H) structure. Because pore size and water concentration are expected to control the formation of water bridge, our simulations span a wide range of pore sizes and water concentrations. Generally, positive potassium layers and negative hydroxyl groups in P-H nanopore can induce partial charges which in return produce instant and local electric fields, favoring the formation of water bridge. In P-H nanopores, water bridge happens at a relatively low water concentration. However, in H-H nanopores water bridge only forms at high water concentrations. Additionally, smaller pore sizes favor the formation of water bridges. However, the presence of an electric field promotes the formation of a water bridge even in larger pore sizes in P-H pores. The results also indicate that in both P-H and H-H nanopores, water adsorption films initially create a smooth surface to promote hydrocarbon flow. In P-H nanopores, further increases in the water concentration causes a sharp decline in the self-diffusion coefficients of hydrocarbon and water due to the formation of water bridge. The presence of electric fields in P-H pores can however weaken the confinement effect of illite and promote hydrocarbon flow. In contrast, in H-H nanopores, the self-diffusion coefficients decline slowly with the increase of water concentration. This is because no water bridge is formed at low water concentrations in H-H nanopores.
- 23 September 2019
- Published by Society of Petroleum Engineers (SPE)
Determination of Total Organic Carbon for Organic Rich Shale Reservoirs by Means of Cores and Logs
Oil production from shale and tight formations will increase to more than 6 million barrels per day (b/d) in the coming decade, making up most of total U.S. oil production (> 50%). However, achieving an accurate formation evaluation of shale faces many complex challenges. One of the complexities is the accurate estimation of shale properties from well logs, which is initially designed for conventional reservoirs. When we use the well logs to obtain shale properties, they often cause some deviations. Therefore, in this work, we combine cores and well logs together to provide a more accurate guideline for estimation of total organic carbon, which is primarily of interest to petroleum geochemists and geologists. Our work is based on Archie's equation. Resistivity log will lead to some incorrect results, such as total resistivity, when we follow the conventional interpretation procedure in well logs. Porosity is another complex parameter, which cannot be determined only by well log, i.e. density, NMR, and Neutron log. Therefore, the flowchart of TOC calculation includes five main parts: (I) the shale content calculation using Gamma log; (II) the determination of shale distributions using Density and Neutron logs and cross-plot; (III) the calculation of total resistivity at different distribution types; (IV) obtaining porosity using core analysis, NMR and density logs; and (V) the calculation of TOC from modified Archie's equation. The results indicate that the shale content has a strong effect on estimation of water saturation and hydrocarbon saturation. Especially, the effect of shale content is exacerbated at a low water saturation. A more accurate flowchart for TOC calculation is established. Based on Archie's equation, we modify total resistivity and porosity by combining Gamma Log, Density Log, Neutron Log, NMR Log, and Cross-plot. An easier way to estimate porosity is provided. We combine the matrix density and kerogen density together and obtain them from core analysis. Poupon's et al. (1954) laminar model has some limitations when applying in shale reservoirs, especially at a low porosity. Literature surveys show few studies on the flowchart of TOC calculation in shale reservoirs. This paper provides some insights into challenges of well logs, core analysis in shale reservoirs and a more accurate guideline of TOC calculation in shale reservoirs.
- 23 September 2019
- Published by Society of Petroleum Engineers (SPE)
Determination of Total Organic Carbon for Organic Rich Shale Reservoirs by Means of Cores and Logs
Oil production from shale and tight formations will increase to more than 6 million barrels per day (b/d) in the coming decade, making up most of total U.S. oil production (> 50%). However, achieving an accurate formation evaluation of shale faces many complex challenges. One of the complexities is the accurate estimation of shale properties from well logs, which is initially designed for conventional reservoirs. When we use the well logs to obtain shale properties, they often cause some deviations. Therefore, in this work, we combine cores and well logs together to provide a more accurate guideline for estimation of total organic carbon, which is primarily of interest to petroleum geochemists and geologists. Our work is based on Archie's equation. Resistivity log will lead to some incorrect results, such as total resistivity, when we follow the conventional interpretation procedure in well logs. Porosity is another complex parameter, which cannot be determined only by well log, i.e. density, NMR, and Neutron log. Therefore, the flowchart of TOC calculation includes five main parts: (I) the shale content calculation using Gamma log; (II) the determination of shale distributions using Density and Neutron logs and cross-plot; (III) the calculation of total resistivity at different distribution types; (IV) obtaining porosity using core analysis, NMR and density logs; and (V) the calculation of TOC from modified Archie's equation. The results indicate that the shale content has a strong effect on estimation of water saturation and hydrocarbon saturation. Especially, the effect of shale content is exacerbated at a low water saturation. A more accurate flowchart for TOC calculation is established. Based on Archie's equation, we modify total resistivity and porosity by combining Gamma Log, Density Log, Neutron Log, NMR Log, and Cross-plot. An easier way to estimate porosity is provided. We combine the matrix density and kerogen density together and obtain them from core analysis. Poupon's et al. (1954) laminar model has some limitations when applying in shale reservoirs, especially at a low porosity. Literature surveys show few studies on the flowchart of TOC calculation in shale reservoirs. This paper provides some insights into challenges of well logs, core analysis in shale reservoirs and a more accurate guideline of TOC calculation in shale reservoirs.