Luca Mendicino
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Luca Mendicino has a total of 32 co-authors. Here are the top co-authors by number of shared publications:
- Nicola Sorrentino
Department of Mechanical, Energy and Management Engineering, University of Calabria, 87036 Rende, Italy
6 shared publications - Anna Pinnarelli
Department of Mechanical, Energy and Management Engineering, University of Calabria, 87036 Rende, Italy
5 shared publications - Daniele Menniti
Department of Mechanical, Energy and Management Engineering, University of Calabria, 87036 Rende, Italy
5 shared publications A. Pinnarelli
Dept. of Mechanical,Energy and Management Engineering, University of Calabria, Italy
4 shared publications- Alessandro Burgio
Independent Researcher, 87036 Rende, Italy
4 shared publications D. Menniti
Dept. of Mechanical,Energy and Management Engineering, University of Calabria, Italy
4 shared publications
Latest Publications
- Open Access
Enabling Technologies for Energy Communities: Some Experimental Use Cases
It is known that the energy transition can be achieved not only with the use of renewable energy sources but also with a new conception and management of the electricity system. Renewable energy communities are then introduced as organizations for maximizing the self-consumption of energy produced from renewable energy sources. To ensure that these energy communities can operate, there is a need for enabling technologies that allow for monitoring, data and algorithms processing as well as the enabling of the same algorithms. There exists a huge confusion in the actual technologies useful to implement the energy communities. This paper first describes and groups the main enabling technologies, analyzing the services that can be offered. The scope is to emphasize the importance of having accurate, efficient and effective technologies that allow the implementation of such communities, underlining how such technologies interact with each other. Using such technologies is important to observing the possible technical and energetic results; indeed, use cases concerning the use of these enabling technologies are proposed and analyzed, showing their operating and their good environmental and energy impact.
Open AccessEnabling Technologies for Energy Communities: Some Experimental Use Cases
It is known that the energy transition can be achieved not only with the use of renewable energy sources but also with a new conception and management of the electricity system. Renewable energy communities are then introduced as organizations for maximizing the self-consumption of energy produced from renewable energy sources. To ensure that these energy communities can operate, there is a need for enabling technologies that allow for monitoring, data and algorithms processing as well as the enabling of the same algorithms. There exists a huge confusion in the actual technologies useful to implement the energy communities. This paper first describes and groups the main enabling technologies, analyzing the services that can be offered. The scope is to emphasize the importance of having accurate, efficient and effective technologies that allow the implementation of such communities, underlining how such technologies interact with each other. Using such technologies is important to observing the possible technical and energetic results; indeed, use cases concerning the use of these enabling technologies are proposed and analyzed, showing their operating and their good environmental and energy impact.
- Top Cited Papers
- 7 April 2022
- Published by Elsevier in Energy Policy
- Vol. 165
Energy communities and key features emerged from business models review
- 7 April 2022
- Published by Elsevier in Energy Policy
- Vol. 165
Top Cited PapersEnergy communities and key features emerged from business models review
- Open Access
DSO Flexibility Market Framework for Renewable Energy Community of Nanogrids
With the introduction of the renewable energy communities in the current electrical market environment, it becomes possible to aggregate small generation resources and users’ loads to exchange power within the aggregation and at the same time provide services to the electrical system. The renewable energy community of users equipped with nanogrid technology allows performing an adequate level of flexibility. It may be the solution to coordinate in the best possible way the energy resources in order to increase the community self-consumption and to provide ancillary services to the grid. In this paper, a model for the interaction between the Distribution System Operator (DSO)—Transmission System Operator (TSO) and the energy community based on nanogrids is proposed and an operational example is presented.
Open AccessDSO Flexibility Market Framework for Renewable Energy Community of Nanogrids
With the introduction of the renewable energy communities in the current electrical market environment, it becomes possible to aggregate small generation resources and users’ loads to exchange power within the aggregation and at the same time provide services to the electrical system. The renewable energy community of users equipped with nanogrid technology allows performing an adequate level of flexibility. It may be the solution to coordinate in the best possible way the energy resources in order to increase the community self-consumption and to provide ancillary services to the grid. In this paper, a model for the interaction between the Distribution System Operator (DSO)—Transmission System Operator (TSO) and the energy community based on nanogrids is proposed and an operational example is presented.
- Open Access
Smart Management of the Production–Demand Binomial and the Active Participation of End-User through the Smart Metering Support
At global level nowadays, there is a general movement towards the goal of a ‘zero-emission’ energy systems. It will require a necessary energy transition characterized by a continuous increase of generation facilities from renewable energy sources (RES), from a massive increase in energy efficiency and, contemporary, an increased use of electricity to meet the energy needs traditionally required through the direct use of fossil fuels. In order to provide end-users with a greater knowledge and awareness of their energy consumption and the benefits of distributed use of renewable energy sources, it is fundamental to employ a smart metering progress which can enable an evolved and ‘smart’ management of the production–demand binomial and an active participation in the energy system. The importance of functionalities implemented in a smart meter—for end-user engagement, empowerment, and awareness—is presented in the paper. For instance, we present a simple optimization functionality for photovoltaic (PV) and storage system sizing based on load and production duration curves and historical data collected by the smart meter with fine resolution. The ease of this functionality uses a data history with extremely high resolutions, which are able to measure the power ramps that occur when an appliance or any other load is connected. An example of application of the smart meter functionality and test cases’ analysis are reported to demonstrate the effectiveness of the tool.
Open AccessSmart Management of the Production–Demand Binomial and the Active Participation of End-User through the Smart Metering Support
At global level nowadays, there is a general movement towards the goal of a ‘zero-emission’ energy systems. It will require a necessary energy transition characterized by a continuous increase of generation facilities from renewable energy sources (RES), from a massive increase in energy efficiency and, contemporary, an increased use of electricity to meet the energy needs traditionally required through the direct use of fossil fuels. In order to provide end-users with a greater knowledge and awareness of their energy consumption and the benefits of distributed use of renewable energy sources, it is fundamental to employ a smart metering progress which can enable an evolved and ‘smart’ management of the production–demand binomial and an active participation in the energy system. The importance of functionalities implemented in a smart meter—for end-user engagement, empowerment, and awareness—is presented in the paper. For instance, we present a simple optimization functionality for photovoltaic (PV) and storage system sizing based on load and production duration curves and historical data collected by the smart meter with fine resolution. The ease of this functionality uses a data history with extremely high resolutions, which are able to measure the power ramps that occur when an appliance or any other load is connected. An example of application of the smart meter functionality and test cases’ analysis are reported to demonstrate the effectiveness of the tool.
- 23 September 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-6
Management model of Nanogrid based Community Energy Storage
- 23 September 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-6
Management model of Nanogrid based Community Energy Storage
- Open Access
- 18 January 2020
- Published by Wiley in International Journal of Photoenergy
- Vol. 2020, 1-14
Analysis of the Power Cloud Framework Benefits and the Role of the City Energy Provider in the New Italian Electricity Tariff Scenario
The need to consume less and better energy pushes more and more to find efficient solutions at the individual end-user and community levels. The concept of an energy community is becoming increasingly popular, and recently, many studies try to demonstrate how an aggregation of end-users, which produces energy according to a distributed generation concept, is a mechanism able to overcome the increasingly tight constraints imposed by the electricity market, both for the end-user and for the network and market operators. In this context, the paper is aimed at verifying the convenience for both end-user and aggregator sides to operate in an aggregate form considering the new tariff scenario imposed in some European countries like Italy.
- 18 January 2020
- Published by Wiley in International Journal of Photoenergy
- Vol. 2020, 1-14
Open AccessAnalysis of the Power Cloud Framework Benefits and the Role of the City Energy Provider in the New Italian Electricity Tariff Scenario
The need to consume less and better energy pushes more and more to find efficient solutions at the individual end-user and community levels. The concept of an energy community is becoming increasingly popular, and recently, many studies try to demonstrate how an aggregation of end-users, which produces energy according to a distributed generation concept, is a mechanism able to overcome the increasingly tight constraints imposed by the electricity market, both for the end-user and for the network and market operators. In this context, the paper is aimed at verifying the convenience for both end-user and aggregator sides to operate in an aggregate form considering the new tariff scenario imposed in some European countries like Italy.
- 1 November 2019
- Published by Elsevier in Applied Energy
- Vol. 253
Corporate power purchase agreement: Formulation of the related levelized cost of energy and its application to a real life case study
- 1 November 2019
- Published by Elsevier in Applied Energy
- Vol. 253
Corporate power purchase agreement: Formulation of the related levelized cost of energy and its application to a real life case study
- 1 June 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-5
Towards a Single Balancing Market for Europe: Imbalance Costs for a 1MW PV Plant in Italy and Spain
The EU Commission within the so-called “balancing guidelines” is oriented towards a common imbalances policy at European level; this policy is still in a definition phase to date. In this framework, this paper studies the imbalance mechanisms currently in force in Italy and Spain; it also identifies the differences between the mechanisms of these two EU Countries and evaluates their implications in the practice. To this aim, the paper illustrates the results of numerical calculations on a real case study, that is a 1MW photovoltaic plant. The numerical calculations take into account the imbalances measured over an entire year and the corresponding costs, in accordance with the Italian and Spanish regulatory framework about imbalances.
- 1 June 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-5
Towards a Single Balancing Market for Europe: Imbalance Costs for a 1MW PV Plant in Italy and Spain
The EU Commission within the so-called “balancing guidelines” is oriented towards a common imbalances policy at European level; this policy is still in a definition phase to date. In this framework, this paper studies the imbalance mechanisms currently in force in Italy and Spain; it also identifies the differences between the mechanisms of these two EU Countries and evaluates their implications in the practice. To this aim, the paper illustrates the results of numerical calculations on a real case study, that is a 1MW photovoltaic plant. The numerical calculations take into account the imbalances measured over an entire year and the corresponding costs, in accordance with the Italian and Spanish regulatory framework about imbalances.
- 1 March 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-6
A compact nanogrid with a behavior-tree control for islanded applications and remote areas
This paper proposes a compact nanogrid for home applications, in remote or isolated areas. The nanogrid is designed to easy the installation and to avoid relevant changes to existing equipment nor to the local electric system in the case of existing dwellings. The proposed nanogrid implements a centralized control; a single microcontroller performs low-level controllers of each power converter and dispatches powers in real time. The energy management system governs the nanogrid and applies specially designed rules; the authors propose a behavior tree to formalize these rules. The paper also presents a 1kW single-phase laboratory prototype of the proposed nanogrid along with a cost-effective solution useful for the remote monitoring and control of the nanogrid the nanogrid. Lastly, the paper ends by illustrating how the proposed nanogrid easily integrates with a commercial home automation system.
- 1 March 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-6
A compact nanogrid with a behavior-tree control for islanded applications and remote areas
This paper proposes a compact nanogrid for home applications, in remote or isolated areas. The nanogrid is designed to easy the installation and to avoid relevant changes to existing equipment nor to the local electric system in the case of existing dwellings. The proposed nanogrid implements a centralized control; a single microcontroller performs low-level controllers of each power converter and dispatches powers in real time. The energy management system governs the nanogrid and applies specially designed rules; the authors propose a behavior tree to formalize these rules. The paper also presents a 1kW single-phase laboratory prototype of the proposed nanogrid along with a cost-effective solution useful for the remote monitoring and control of the nanogrid the nanogrid. Lastly, the paper ends by illustrating how the proposed nanogrid easily integrates with a commercial home automation system.