Paritosh Mohanty
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Paritosh Mohanty has a total of 111 co-authors. Here are the top co-authors by number of shared publications:
Raeesh Muhammad
11 shared publications- Anuj Rawat
Functional Materials Laboratory, Department of Chemistry
9 shared publications Sudiksha Aggrawal
Functional Materials Laboratory, Department of Chemistry, Indian Institute of Technology Roorkee, Roorkee, Uttarakhand 247667, India
7 shared publicationsAnuj Rawat
6 shared publications- Arun Kumar
Functional Materials Laboratory, Department of Chemistry
5 shared publications - Indu Chauhan
Department of Biotechnology, Dr. B. R. Ambedkar National Institute of Technology Jalandhar, Jalandhar, India
5 shared publications
Latest Publications
- 13 November 2026
- Published by Wiley in Advanced Optical Materials
Nanoporous Stacked Polytriazine With Sulfur Enrichment for Detection of Near Infrared Radiation
Structural reorientation owing to the incorporation of sulfur in nitrogen enriched nanoporous polytriazine (SNENP) leads to the formation of a stacked polymeric framework. This stacking aligns the electron density in the framework through facilitating the delocalization of electrons leading to a reduction in the bandgap with an increase in electrical conductivity. A significant reduction in bandgap from 3.10 eV in the pristine nitrogen enriched nanoporous polytriazine (NENP) to 1.14 eV in SNENP was observed, which indicates a transition in optical absorption from ultraviolet (UV) to near infrared (NIR) region. The sulfur enrichment improves the electrical conductivity from 6.54 to 28.84 S m −1 at room temperature. The SNENP‐based photodetector devices show a high photocurrent of 10.63 mA (vs 1.01 mA in NENP) and a responsivity of 107.69 A W −1 (vs 34.61 A W −1 in NENP) at a voltage of −10 V with an 808 nm incident light with optical power density of 1.0 µW mm −2 . This enhanced photodetection performance is associated with the increased charge carrier density, high electrical conductivity, and reduced trap density within stacked nanoporous structure of SNENP. These findings demonstrate that dual‐heteroatom nanoporous polytriazine framework (SNENP) provides an effective platform for the development of high‐performance NIR photodetectors.
- 13 November 2026
- Published by Wiley in Advanced Optical Materials
Nanoporous Stacked Polytriazine With Sulfur Enrichment for Detection of Near Infrared Radiation
Structural reorientation owing to the incorporation of sulfur in nitrogen enriched nanoporous polytriazine (SNENP) leads to the formation of a stacked polymeric framework. This stacking aligns the electron density in the framework through facilitating the delocalization of electrons leading to a reduction in the bandgap with an increase in electrical conductivity. A significant reduction in bandgap from 3.10 eV in the pristine nitrogen enriched nanoporous polytriazine (NENP) to 1.14 eV in SNENP was observed, which indicates a transition in optical absorption from ultraviolet (UV) to near infrared (NIR) region. The sulfur enrichment improves the electrical conductivity from 6.54 to 28.84 S m −1 at room temperature. The SNENP‐based photodetector devices show a high photocurrent of 10.63 mA (vs 1.01 mA in NENP) and a responsivity of 107.69 A W −1 (vs 34.61 A W −1 in NENP) at a voltage of −10 V with an 808 nm incident light with optical power density of 1.0 µW mm −2 . This enhanced photodetection performance is associated with the increased charge carrier density, high electrical conductivity, and reduced trap density within stacked nanoporous structure of SNENP. These findings demonstrate that dual‐heteroatom nanoporous polytriazine framework (SNENP) provides an effective platform for the development of high‐performance NIR photodetectors.
- 24 June 2026
- Published by Wiley in Chemnanomat
- Vol. 12 (6) , e202500798
Microwave‐Enabled Immobilization of Cu 2 O on Cellulosic Paper for Antimicrobial Performance Against Gram‐Positive and Gram‐Negative Bacteria
Immobilization of Cu 2 O on cellulose fibers has been successfully conducted by a microwave‐assisted synthesis approach at 60°C and 300 W power within 7 min. A Cu 2 O loading of 15.3 wt% was achieved in this short experimental time without employing any linker, binder, or retention aid. The particle size of Cu 2 O was estimated to be in the range from 260 nm to 1.3 µm. Paper sheets have been fabricated without (blank paper designated as BP) and with Cu 2 O‐immobilized cellulosic fibers using a TAPPI (Technical Association of the Pulp and Paper Industry) Handsheet former, according to TAPPI test method 205 sp‐02. The immobilization of Cu 2 O on paper matrices altered the surface hydrophilicity, resulting in a substantial increase in the contact angle, reaching up to 83°. The tensile strength was increased from 595 N/m in BP to 1303 N/m for Cu 2 O‐immobilized matrices. The antimicrobial activity has been substantially improved in Cu 2 O‐immobilized paper matrices against both Gram‐positive ( S. aureus ) and Gram‐negative ( E. coli ) bacterial species. A prominent inhibition zone of 6–18 mm against S. aureus and 6–16 mm against E. coli was observed within a 12‐h incubation period, accompanied by maximum % reduction in bacterial count of 98% and 95%, respectively, within 2 h of visible light exposure.
- 24 June 2026
- Published by Wiley in Chemnanomat
- Vol. 12 (6) , e202500798
Microwave‐Enabled Immobilization of Cu 2 O on Cellulosic Paper for Antimicrobial Performance Against Gram‐Positive and Gram‐Negative Bacteria
Immobilization of Cu 2 O on cellulose fibers has been successfully conducted by a microwave‐assisted synthesis approach at 60°C and 300 W power within 7 min. A Cu 2 O loading of 15.3 wt% was achieved in this short experimental time without employing any linker, binder, or retention aid. The particle size of Cu 2 O was estimated to be in the range from 260 nm to 1.3 µm. Paper sheets have been fabricated without (blank paper designated as BP) and with Cu 2 O‐immobilized cellulosic fibers using a TAPPI (Technical Association of the Pulp and Paper Industry) Handsheet former, according to TAPPI test method 205 sp‐02. The immobilization of Cu 2 O on paper matrices altered the surface hydrophilicity, resulting in a substantial increase in the contact angle, reaching up to 83°. The tensile strength was increased from 595 N/m in BP to 1303 N/m for Cu 2 O‐immobilized matrices. The antimicrobial activity has been substantially improved in Cu 2 O‐immobilized paper matrices against both Gram‐positive ( S. aureus ) and Gram‐negative ( E. coli ) bacterial species. A prominent inhibition zone of 6–18 mm against S. aureus and 6–16 mm against E. coli was observed within a 12‐h incubation period, accompanied by maximum % reduction in bacterial count of 98% and 95%, respectively, within 2 h of visible light exposure.
- 19 June 2026
- Published by American Chemical Society (ACS) in Energy & Fuels
- Vol. 40 (26) , 14152-14162
Triazine-Functionalized Cellulose Fibers as Electrocatalysts for Nitrate-to-Ammonia Conversion
- 19 June 2026
- Published by American Chemical Society (ACS) in Energy & Fuels
- Vol. 40 (26) , 14152-14162
Triazine-Functionalized Cellulose Fibers as Electrocatalysts for Nitrate-to-Ammonia Conversion
- 29 March 2026
- Published by American Chemical Society (ACS) in Langmuir
- Vol. 42 (14) , 9898-9909
Nickel Single Atoms Embedded in 2D Stacked Polytriazine as an Electrocatalyst for Oxygen Evolution Reaction
Synthesis of single-atom catalysts (SACs) remains challenging, particularly to achieve high metal loading while preserving atomic dispersion. Here, we report a low-temperature synthesis strategy that effectively stabilizes individual single metal atoms on a 2D stacked polytriazine framework (g-C3N4) with a high metal loading. In this context, a microwave-assisted method was utilized for the synthesis of Ni-based SACs embedded in 2D stacked polytriazine at 140 °C for 30 min. A thorough analysis of XRD, XPS, and XAS reveals the co-ordination of Ni with N in the polytriazine structure, which not only facilitates stacking of polytriazine sheets but also helps in the stabilization of Ni single atoms. Both density functional theory (DFT) calculation and EXAFS curve fittings reveal that Ni2+ is present in-plane being coordinated with four N atoms and between two layers of the polytriazine framework in co-ordination with six N atoms. The resulting SAC achieves a Ni metal loading of up to 2.8 wt %, with a specific surface area (SABET) of 418 m2 g–1. This system exhibits not only Ni single atomic active sites but also strong Ni–N co-ordination, which could be effective for electrochemical oxygen evolution reaction (OER). Further, the SAC demonstrates high electrocatalytic performance toward OER, with a low overpotential of 330 mV at 10 mA cm–2 and a low Tafel slope of 84 mV dec–1 in 1 M KOH. The combined effect of both Ni single atomic active sites and stacked polytriazine leads to a high turnover frequency (TOF) of 0.05 s–1 and stability up to 50 h without any appreciable change in the microstructure.
- 29 March 2026
- Published by American Chemical Society (ACS) in Langmuir
- Vol. 42 (14) , 9898-9909
Nickel Single Atoms Embedded in 2D Stacked Polytriazine as an Electrocatalyst for Oxygen Evolution Reaction
Synthesis of single-atom catalysts (SACs) remains challenging, particularly to achieve high metal loading while preserving atomic dispersion. Here, we report a low-temperature synthesis strategy that effectively stabilizes individual single metal atoms on a 2D stacked polytriazine framework (g-C3N4) with a high metal loading. In this context, a microwave-assisted method was utilized for the synthesis of Ni-based SACs embedded in 2D stacked polytriazine at 140 °C for 30 min. A thorough analysis of XRD, XPS, and XAS reveals the co-ordination of Ni with N in the polytriazine structure, which not only facilitates stacking of polytriazine sheets but also helps in the stabilization of Ni single atoms. Both density functional theory (DFT) calculation and EXAFS curve fittings reveal that Ni2+ is present in-plane being coordinated with four N atoms and between two layers of the polytriazine framework in co-ordination with six N atoms. The resulting SAC achieves a Ni metal loading of up to 2.8 wt %, with a specific surface area (SABET) of 418 m2 g–1. This system exhibits not only Ni single atomic active sites but also strong Ni–N co-ordination, which could be effective for electrochemical oxygen evolution reaction (OER). Further, the SAC demonstrates high electrocatalytic performance toward OER, with a low overpotential of 330 mV at 10 mA cm–2 and a low Tafel slope of 84 mV dec–1 in 1 M KOH. The combined effect of both Ni single atomic active sites and stacked polytriazine leads to a high turnover frequency (TOF) of 0.05 s–1 and stability up to 50 h without any appreciable change in the microstructure.
- 17 December 2025
- Published by American Chemical Society (ACS) in ACS Sustainable Chemistry & Engineering
- Vol. 14 (1) , 497-508
Electrochemical Synthesis of Urea and Ammonia by Boron- and Nitrogen-Enriched Nanoporous Polymeric Material as a Metal-Free Electrocatalyst
- 17 December 2025
- Published by American Chemical Society (ACS) in ACS Sustainable Chemistry & Engineering
- Vol. 14 (1) , 497-508
Electrochemical Synthesis of Urea and Ammonia by Boron- and Nitrogen-Enriched Nanoporous Polymeric Material as a Metal-Free Electrocatalyst
- 8 October 2025
- Published by American Chemical Society (ACS) in Energy & Fuels
- Vol. 39 (42) , 20548-20557
S- and N-Enriched Cyclophosphazene- and Triazine-Based Inorganic–Organic Hybrid Nanoporous Electrocatalyst for Nitrate Upcycling to Ammonia
- 8 October 2025
- Published by American Chemical Society (ACS) in Energy & Fuels
- Vol. 39 (42) , 20548-20557
S- and N-Enriched Cyclophosphazene- and Triazine-Based Inorganic–Organic Hybrid Nanoporous Electrocatalyst for Nitrate Upcycling to Ammonia
- 2 May 2025
- Published by Wiley in Small Methods
- Vol. 9 (11) , e2500655
Low Temperature Complexation Approach for Immobilization of Single Copper Atom Catalyst in Stacked Polytriazine for Click Cycloaddition Reaction
A significant research gap in the field of synthesis of single atom catalysts (SACs) is addressed by developing a low‐temperature complexation approach to stabilize the single metal atoms on stacked polytiazine matrix (g‐C 3 N 4 ) with a good metal loading. Unlike conventional high‐energy (400–700 °C) and time‐intensive (120–300 min) methods typically used for embedding SACs in g‐C 3 N 4 matrices, the present synthesis utilizes a facile, microwave‐assisted method that operates at a low temperature of 140 °C and completes within 30 min. Comprehensive analysis reveal that complexation of the Cu 2+ /Cu + ions with nitrogen in the polytriazine structure facilitates layer stacking. Specifically, Cu⁺ ions promote sheet formation in co‐ordination with two nearby N atoms, while Cu 2+ ions stabilize the stacked layers of the polytriazine framework through co‐ordination with four N atoms. The resulting SAC exhibits a Cu metal loading up to 3.5 wt.%, with a specific surface area (SA BET ) of 330 m 2 g −1 and pore size distribution centered at 1.9 and 5 nm. The SAC demonstrates excellent catalytic performance for click cycloaddition reactions under base‐free conditions, with a high turnover frequency (TOF) of 120 h −1 , a broad substrate scope, and reusability across seven cycles without detectable Cu leaching, making it a promising SAC for triazole synthesis.
- 2 May 2025
- Published by Wiley in Small Methods
- Vol. 9 (11) , e2500655
Low Temperature Complexation Approach for Immobilization of Single Copper Atom Catalyst in Stacked Polytriazine for Click Cycloaddition Reaction
A significant research gap in the field of synthesis of single atom catalysts (SACs) is addressed by developing a low‐temperature complexation approach to stabilize the single metal atoms on stacked polytiazine matrix (g‐C 3 N 4 ) with a good metal loading. Unlike conventional high‐energy (400–700 °C) and time‐intensive (120–300 min) methods typically used for embedding SACs in g‐C 3 N 4 matrices, the present synthesis utilizes a facile, microwave‐assisted method that operates at a low temperature of 140 °C and completes within 30 min. Comprehensive analysis reveal that complexation of the Cu 2+ /Cu + ions with nitrogen in the polytriazine structure facilitates layer stacking. Specifically, Cu⁺ ions promote sheet formation in co‐ordination with two nearby N atoms, while Cu 2+ ions stabilize the stacked layers of the polytriazine framework through co‐ordination with four N atoms. The resulting SAC exhibits a Cu metal loading up to 3.5 wt.%, with a specific surface area (SA BET ) of 330 m 2 g −1 and pore size distribution centered at 1.9 and 5 nm. The SAC demonstrates excellent catalytic performance for click cycloaddition reactions under base‐free conditions, with a high turnover frequency (TOF) of 120 h −1 , a broad substrate scope, and reusability across seven cycles without detectable Cu leaching, making it a promising SAC for triazole synthesis.
- Open Access
- 18 March 2025
- Published by Royal Society of Chemistry (RSC) in Nanoscale Advances
- Vol. 7 (9) , 2626-2633
A nitrogen and phosphorus enriched inorganic–organic hybrid material for electrochemical detection of selenium(iv) ions
A heteroatom (nitrogen and phosphorus) enriched pyridinic bridged inorganic–organic hybrid material (HPHM) was synthesized by polycondensing phosphonitrilic chloride trimer (PNC) and 2,6-diaminopyridine in DMSO at 140 °C. The synthesized material was used as an efficient electrode material for the electrochemical detection of selenium(IV) ions [Se(IV)] in aqueous solution. The HPHM electrode (active mass loading of 4.1 mg cm−2) achieves a detection range of 5–50 ppb at a deposition potential of −1.2 V and a deposition time of 170 s with a lower limit of detection (LOD) of 2.18 ppb. This LOD is significantly below the World Health Organization's (WHO) recommended maximum level for selenium in drinking water. Moreover, the electrode material maintains high selectivity for Se(IV) ions in the presence of various interfering ions and high sensitivity over 200 cycles with only a minimal (∼6.83%) decline in current density response. The higher Se(IV) ion detection capability is attributed to the strategic incorporation of nitrogen and phosphorus heteroatoms, enhancing the material's electrochemical properties.
- 18 March 2025
- Published by Royal Society of Chemistry (RSC) in Nanoscale Advances
- Vol. 7 (9) , 2626-2633
Open AccessA nitrogen and phosphorus enriched inorganic–organic hybrid material for electrochemical detection of selenium(iv) ions
A heteroatom (nitrogen and phosphorus) enriched pyridinic bridged inorganic–organic hybrid material (HPHM) was synthesized by polycondensing phosphonitrilic chloride trimer (PNC) and 2,6-diaminopyridine in DMSO at 140 °C. The synthesized material was used as an efficient electrode material for the electrochemical detection of selenium(IV) ions [Se(IV)] in aqueous solution. The HPHM electrode (active mass loading of 4.1 mg cm−2) achieves a detection range of 5–50 ppb at a deposition potential of −1.2 V and a deposition time of 170 s with a lower limit of detection (LOD) of 2.18 ppb. This LOD is significantly below the World Health Organization's (WHO) recommended maximum level for selenium in drinking water. Moreover, the electrode material maintains high selectivity for Se(IV) ions in the presence of various interfering ions and high sensitivity over 200 cycles with only a minimal (∼6.83%) decline in current density response. The higher Se(IV) ion detection capability is attributed to the strategic incorporation of nitrogen and phosphorus heteroatoms, enhancing the material's electrochemical properties.