Ilias Efthymiopoulos
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Ilias Efthymiopoulos has a total of 161 co-authors. Here are the top co-authors by number of shared publications:
- A. Farricker
Cockroft Institute (A36), Liverpool University, Warrington WA4 4AD, UK
2 shared publications - A. Kayis Topaksu
Department of Physics, Faculty of Science and Letters, University of Cukurova, 01330 Adana, Turkey
2 shared publications - Alessio Giarnetti
Dipartimento di Matematica e Fisica, Università di Roma Tre, Via della Vasca Navale 84, 00146 Rome, Italy
2 shared publications - Andrea Longhin
INFN, Sezione di Padova
2 shared publications - Antonio Branca
University of Milano-Bicocca and INFN Sez. di Milano-Bicocca, 20126 Milano, Italy
2 shared publications - B. Bolling
European Spallation Source, Box 176, 221 00 Lund, Sweden
2 shared publications
Latest Publications
- Open Access
Study of Supernova Neutrinos at ESSnuSB
In this paper, we have studied the sensitivity of the ESSnuSB far detector to supernova neutrinos. ESSnuSB is a proposed long-baseline neutrino experiment in Sweden, which will use a 538 kt water Cherenkov detector to probe the leptonic phase by studying the second oscillation maximum. However, given the very large detector volume, it will have an excellent sensitivity to supernova neutrinos if a supernova explosion occurs during the run-time of ESSnuSB. Motivated by this, we first estimate the expected event rates at the ESSnuSB far detector for three different supernova flux models and then we probe its capability to distinguish these flux models. Additionally, we also investigate the impact of systematic errors and detector efficiency. Our results show that depending on the model of the supernova neutrinos, the expected number of events detected at Earth varies significantly. Our results also show that the ESSnuSB far detector may have excellent potential in distinguishing these flux models depending upon the distance of the supernova explosion, systematic errors and detector efficiency.Open AccessStudy of Supernova Neutrinos at ESSnuSB
In this paper, we have studied the sensitivity of the ESSnuSB far detector to supernova neutrinos. ESSnuSB is a proposed long-baseline neutrino experiment in Sweden, which will use a 538 kt water Cherenkov detector to probe the leptonic phase by studying the second oscillation maximum. However, given the very large detector volume, it will have an excellent sensitivity to supernova neutrinos if a supernova explosion occurs during the run-time of ESSnuSB. Motivated by this, we first estimate the expected event rates at the ESSnuSB far detector for three different supernova flux models and then we probe its capability to distinguish these flux models. Additionally, we also investigate the impact of systematic errors and detector efficiency. Our results show that depending on the model of the supernova neutrinos, the expected number of events detected at Earth varies significantly. Our results also show that the ESSnuSB far detector may have excellent potential in distinguishing these flux models depending upon the distance of the supernova explosion, systematic errors and detector efficiency. - Open Access
The ESSnuSB Design Study: Overview and Future Prospects
ESSnuSB is a design study for an experiment to measure the CP violation in the leptonic sector at the second neutrino oscillation maximum using a neutrino beam driven by the uniquely powerful ESS linear accelerator. The reduced impact of systematic errors on sensitivity at the second maximum allows for a very precise measurement of the CP violating parameter. This review describes the fundamental advantages of measurement at the second maximum, the necessary upgrades to the ESS linac in order to produce a neutrino beam, the near and far detector complexes, and the expected physics reach of the proposed ESSnuSB experiment, concluding with the near future developments aimed at the project realization.
Open AccessThe ESSnuSB Design Study: Overview and Future Prospects
ESSnuSB is a design study for an experiment to measure the CP violation in the leptonic sector at the second neutrino oscillation maximum using a neutrino beam driven by the uniquely powerful ESS linear accelerator. The reduced impact of systematic errors on sensitivity at the second maximum allows for a very precise measurement of the CP violating parameter. This review describes the fundamental advantages of measurement at the second maximum, the necessary upgrades to the ESS linac in order to produce a neutrino beam, the near and far detector complexes, and the expected physics reach of the proposed ESSnuSB experiment, concluding with the near future developments aimed at the project realization.
- Open Access
- 20 January 2020
- Published by EDP Sciences in EPJ Web of Conferences
- Vol. 225, 01008
Metu-Defocusing Beamline : A 15-30 Mev Proton Irradiation Facility and Beam Measurement System
Middle East Technical University – Defocusing Beam Line (METU-DBL) project is an irradiation facility providing 15 MeV to 30 MeV kinetic energy protons for testing various high radiation level applications, ranging from Hi-Lumi LHC upgrade, space electronic components to nuclear material research. The project located inside the premises of the TAEA (Turkish Atomic Energy Agency) SANAEM (Saraykoy Nuclear Education and Research Center) close to Ankara, provides users a wide selectable flux menu (105–1010 p/cm2/s). The facility is now being commissioned and the facility will be providing a large test area (20 cm x 15 cm) for material, detector and electronics tests. The proton beam is monitored along the beamline using aluminum oxide screens and the flux and uniformity is measured using three detectors attached to the robotic system for cross- checks. A fiber scintillator detector scans the large irradiation area while small area diamond detector and Timepix3 detector are used for spot checks for calibration. Several samples can be radiated simultaneously inside the irradiation area and the robotic system provides 5 separate holders for samples which can be moved in or out, providing users flexibility for the desired fluence. This talk will first introduce METU- DBL as a radiation test facility, then discuss the radiation monitoring of the beam area and the radiation room, while highlighting how this facility can be used for future testing of materials for radiation tolerance.
- 20 January 2020
- Published by EDP Sciences in EPJ Web of Conferences
- Vol. 225, 01008
Open AccessMetu-Defocusing Beamline : A 15-30 Mev Proton Irradiation Facility and Beam Measurement System
Middle East Technical University – Defocusing Beam Line (METU-DBL) project is an irradiation facility providing 15 MeV to 30 MeV kinetic energy protons for testing various high radiation level applications, ranging from Hi-Lumi LHC upgrade, space electronic components to nuclear material research. The project located inside the premises of the TAEA (Turkish Atomic Energy Agency) SANAEM (Saraykoy Nuclear Education and Research Center) close to Ankara, provides users a wide selectable flux menu (105–1010 p/cm2/s). The facility is now being commissioned and the facility will be providing a large test area (20 cm x 15 cm) for material, detector and electronics tests. The proton beam is monitored along the beamline using aluminum oxide screens and the flux and uniformity is measured using three detectors attached to the robotic system for cross- checks. A fiber scintillator detector scans the large irradiation area while small area diamond detector and Timepix3 detector are used for spot checks for calibration. Several samples can be radiated simultaneously inside the irradiation area and the robotic system provides 5 separate holders for samples which can be moved in or out, providing users flexibility for the desired fluence. This talk will first introduce METU- DBL as a radiation test facility, then discuss the radiation monitoring of the beam area and the radiation room, while highlighting how this facility can be used for future testing of materials for radiation tolerance.
- Open Access
Interface with Experiments
Chapter 8 in High-Luminosity Large Hadron Collider (HL-LHC) : Preliminary Design Report. The Large Hadron Collider (LHC) is one of the largest scientific instruments ever built. Since opening up a new energy frontier for exploration in 2010, it has gathered a global user community of about 7,000 scientists working in fundamental particle physics and the physics of hadronic matter at extreme temperature and density. To sustain and extend its discovery potential, the LHC will need a major upgrade in the 2020s. This will increase its luminosity (rate of collisions) by a factor of five beyond the original design value and the integrated luminosity (total collisions created) by a factor ten. The LHC is already a highly complex and exquisitely optimised machine so this upgrade must be carefully conceived and will require about ten years to implement. The new configuration, known as High Luminosity LHC (HL-LHC), will rely on a number of key innovations that push accelerator technology beyond its present limits. Among these are cutting-edge 11-12 tesla superconducting magnets, compact superconducting cavities for beam rotation with ultra-precise phase control, new technology and physical processes for beam collimation and 300 metre-long high-power superconducting links with negligible energy dissipation. The present document describes the technologies and components that will be used to realise the project and is intended to serve as the basis for the detailed engineering design of HL-LHC.
Open AccessInterface with Experiments
Chapter 8 in High-Luminosity Large Hadron Collider (HL-LHC) : Preliminary Design Report. The Large Hadron Collider (LHC) is one of the largest scientific instruments ever built. Since opening up a new energy frontier for exploration in 2010, it has gathered a global user community of about 7,000 scientists working in fundamental particle physics and the physics of hadronic matter at extreme temperature and density. To sustain and extend its discovery potential, the LHC will need a major upgrade in the 2020s. This will increase its luminosity (rate of collisions) by a factor of five beyond the original design value and the integrated luminosity (total collisions created) by a factor ten. The LHC is already a highly complex and exquisitely optimised machine so this upgrade must be carefully conceived and will require about ten years to implement. The new configuration, known as High Luminosity LHC (HL-LHC), will rely on a number of key innovations that push accelerator technology beyond its present limits. Among these are cutting-edge 11-12 tesla superconducting magnets, compact superconducting cavities for beam rotation with ultra-precise phase control, new technology and physical processes for beam collimation and 300 metre-long high-power superconducting links with negligible energy dissipation. The present document describes the technologies and components that will be used to realise the project and is intended to serve as the basis for the detailed engineering design of HL-LHC.
- Open Access
- 3 July 2015
- Published by Sissa Medialab Srl
- Vol. 213, 102
CERN-GIF++: a new irradiation facility to test large-area particle detectors for the high-luminosity LHC program
- 3 July 2015
- Published by Sissa Medialab Srl
- Vol. 213, 102
Open AccessCERN-GIF++: a new irradiation facility to test large-area particle detectors for the high-luminosity LHC program
- Open Access
- 31 May 2012
- Published by Sissa Medialab Srl
- Vol. 134, 041
Future neutrino oscillation facilities
- 31 May 2012
- Published by Sissa Medialab Srl
- Vol. 134, 041
Open AccessFuture neutrino oscillation facilities