ESEric Samakinwa

Eric Samakinwa

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Eric Samakinwa has a total of 78 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Mean-state warming loads Germany’s extreme summer heat burden

    by Eric Samakinwa, Leon Scheiber, Jan-Christopher Cohrs, Susanne Pfeifer, Diana Rechid

    European summers are warming rapidly, increasing the frequency and intensity of hazardous heat. Here, we quantify how mean-state warming has increased Germany’s extreme summer heat burden and how that risk scales with global-warming level (GWL). We develop OMS (observation-based mean-shift), an observation-based counterfactual framework that preserves observed day-to-day weather variability while shifting only the seasonal mean state. Using OMS, we estimate Germany’s JJA mean-temperature sensitivity to global mean surface temperature (GMST) and translate observed summers to pre-industrial (PI), + 1.5 ∘ C , and + 2.0 ∘ C climates by shifting the observed daily JJA series by β times the change in GMST. Because only the seasonal mean is adjusted, OMS isolates the weather-preserving mean-state contribution to heat burden while leaving circulation statistics unchanged. Germany exhibits strong regional amplification, with an estimated sensitivity of 2.63 ∘ C of local summer warming per 1 ∘ C of global warming (95% confidence interval: 1.62–3.62). To connect warming to exposure-relevant outcomes, we define the extreme-heat burden (EHD), measured in ∘ C d, as the cumulative degrees above a fixed national summer 95th-percentile threshold for 1991–2020. We apply OMS to the selected extreme summers of 2018, 2019, and 2022 within the 2004–2024 study period to construct GWL-consistent counterfactual realizations for each case while retaining intra-seasonal variability. Across all three summers, anthropogenic warming yields a substantial increase in EHD from PI to present-day conditions, with further marked increases toward + 1.5 ∘ C and + 2.0 ∘ C . Subnational analyses show coherent increases across all federal states, but substantial heterogeneity in magnitude, highlighting where risk intensifies most strongly as warming progresses. We additionally quantify per-capita EHD using population data and assess distributional equity across states. These observation-based estimates provide a transparent basis for heat-risk planning and adaptation by separating the realized anthropogenic contribution from the additional mean-state burden associated with higher GWLs.

  • Open Access

    Mean-state warming loads Germany’s extreme-summer heat burden

    by Eric Samakinwa, Leon Scheiber, Jan-Christopher Cohrs, Sussane Pfeifer, Tim Tewes, Diana Rechid

    European summers are warming rapidly, increasing the frequency and intensity of hazardous heat. Here we quantify how mean-state warming has increased Germany's summer extreme-heat burden and how that risk scales with global warming level (GWL). We introduce OMS (Observation-based Mean-Shift), an observation-based counterfactual framework that preserves observed day-to-day weather variability while shifting only the seasonal mean state. Using OMS, we quantify Germany's sensitivity of June--August mean temperature to global mean surface temperature and translate observed summers to pre-industrial, +1.5 °C, and +2.0 °C climates by shifting the observed daily JJA series. Because only the seasonal mean is adjusted, OMS isolates the thermodynamic signal while leaving circulation statistics unchanged, providing a conservative baseline.Germany exhibits strong regional amplification, with an estimated sensitivity of +2.63 °C of local summer warming per +1 °C of global warming and a 95% confidence interval of 1.62–3.62. To connect warming to exposure-relevant outcomes, we define the extreme-heat burden, EHD, in °C·days as cumulative degrees above a fixed national summer 95th-percentile threshold for 1991–2020. We evaluate the high-impact summers of 2018, 2019, and 2022, producing warming-level-consistent counterfactual realizations for each event while retaining intra-seasonal variability. Across these events, anthropogenic warming yields a substantial increase in EHD from pre-industrial to present-day conditions, with sharp further escalation toward +1.5 °C and +2.0 °C. Subnational analyses show coherent increases across all federal states but with substantial heterogeneity in magnitude, highlighting where risk intensifies most strongly as warming progresses. We additionally quantify per-capita burden using population data and assess distributional equity using Lorenz curves and Gini coefficients. Gini coefficients show that total extreme-heat burden is distributed fairly evenly across years, whereas per-capita extreme-heat burden is notably more concentrated. This implies that while the overall hazard is broadly spread across federal states, population-normalized exposure is substantially more unequal, with a disproportionate share of per-capita heat burden concentrated in a subset of states.

  • Open Access

    FOCAL Urban Pilot: Efficient exploration of climate data locally for data-driven decision-support in urban climate adaptation planning

    by Jan-Christopher Cohrs, Guy Brasseur, Suyeon Choi, Radovan Hilbert, Eva Klien, Kevin Kocon, Muthu Kumar, Noribeth Mariscal, Jiří Matějka, Elke Moors, et al.

    Climate change impacts are increasingly manifested at local scales, where mitigation and adaptation strategies are implemented. Despite the growing wealth of available climate data and services, their effective usage in local climate impact assessment and decision-making processes for mitigation and adaptation planning remains limited due to scale mismatches, computational constraints, complexity, and usability barriers for non-domain experts. Addressing these challenges requires both advanced computational methods and improved access to climate data and analysis tools. The EU Horizon project, FOCAL, bridges the gap between data, services, and their users by implementing an open compute platform that combines intelligent workflow management with high-performance computing (HPC) resources to allow for an efficient exploration of climate data on a local scale. In addition, innovative artificial intelligence (AI) tools are developed and made available to enhance climate data analysis in terms of speed, robustness, pattern detection, and localization; thereby expanding the toolkit of climate data analysis and impact assessment methods. A main objective of FOCAL is to support science-based, actionable decision-making processes in forestry and urban planning through its provided tools. In a co-design process involving developers and potential platform users from two forest pilot regions with contrasting ecological and management contexts (Forest Pilots) as well as a pilot city (Urban Pilot), web applications for intuitive user-platform-interaction and workflows, grounded in state-of-the-art climate science, to address concrete user questions in forestry and urban planning have been specified. As a result, decision makers can efficiently use climate data for the development of climate adaptation strategies.This contribution focuses on the Urban Pilot, implemented for the pilot city Constance (Baden-Württemberg, southern Germany), located at the western end of Lake Constance. Three core workflows have been developed:1) Regional climate change workflow: provision of robust regional climate change information for the past and the future under different global warming levels for urban areas, based on regional climate model and localized climate data, serving multi-sectoral local climate impact assessments;2) Urban hot and cool spot workflow: detection and high-spatial-resolution visual exploration of hot and cool spots in urban environments, supporting exposure assessment by integrating additional data (e.g., population or infrastructure data), risk assessment, and the planning of urban heat resilience measures and cooling spaces;3) Urban blue spot workflow: identification of blue spots (rainfall accumulation hazards) and provision of blue spot data in urban landscapes using processed precipitation data and extreme precipitation scenarios, supporting applications in hydrological modeling, flood risk management, and climate adaptation.By leveraging HPC-based data processing and AI-assisted analysis, these workflows translate complex climate data into actionable, locally relevant information. While demonstrated for the pilot city Constance, the methods and workflows are transferable to other urban areas, contributing to scalable and reproducible climate services.

  • Open Access

    Urban Heat Effects and Targeted Adaptation under Extreme Events in the Lakeside City: A Case Study of Konstanz, Germany

    by Suyeon Choi, Eric Samakinwa, Diana Rechid, Guy Brasseur

    Urban climate conditions in lakeside cities are shaped by the interaction between the urban morphology and atmospheric processes modified by the lake. It is essential to understand how and where the urban effect intensifies in order to develop effective adaptation strategies under increasingly frequent and intense extreme climate events. In this study, the city of Konstanz, located on Lake Constance, is used as a case study to examine urban-induced climate responses during extreme conditions.To assess urban climate impacts, high-resolution (1 km) simulations were conducted using the Weather Research and Forecasting (WRF) model with Building Effect Parametrization and Building Energy Model (BEP/BEM) integration. We simulated multiple extreme weather events, including heatwave and heavy rainfall events. Urban effects were quantified by contrasting current urban land use patterns with a hypothetical non-urban surface representation, allowing the evaluation of urban climate signals under lake-influenced conditions.Results indicate that the urban thermal effect is particularly pronounced under nighttime conditions. Compared to non-urban conditions, urban areas exhibit enhanced nighttime warming, with surface skin temperatures rising by approximately 1–2.5°C during heatwaves. These patterns suggest that urban heat storage and release significantly contribute to the nighttime thermal conditions. Furthermore, this nighttime warming varies with lake proximity and land-use characteristics, indicating that these factors influence the spatial distribution of urban heat during extreme events.Based on the findings, spatially targeted urban adaptation strategies are explored through the application of mitigation measures in areas experiencing persistent thermal stress. This study suggests that targeted approaches can effectively reduce local heat stress while limiting the extent of mitigation strategy application, emphasizing the potential for more strategic and efficient urban climate adaptation. This perspective provides useful context for climate-responsive urban planning approaches that give priority to impact-prone areas under increasing extreme events.

  • Open Access

    Changing humid heat exposure in Germany – where senior citizens will be most affected and why

    by Leon Scheiber, Eric Samakinwa, Jan-Christopher Cohrs, Torsten Weber, Susanne Pfeifer, Diana Rechid

    Europe is currently the fastest warming continent and even in temperate countries such as Germany the number of extreme temperature days has been rising. These pose increasing risks to human health and wellbeing. Yet, while dry heat and urban heat islands have received substantial scientific attention, humid heat episodes have historically been rare in Central Europe. Recent observations, however, indicate that their frequency and intensity are growing, and projections suggest that regions once considered climatically temperate may increasingly encounter conditions previously confined to the tropics. In this study, we examine humid heat stress in terms of days with exceptionally high vapor pressure exceeding a critical threshold of 18.8 hPa. With a particular focus on elderly populations (65+), we quantify humid heat stress in Germany for a historical reference period (1961-1990) calculated from ERA5 re-analysis, and for the future under a global warming level of +2 °C using an ensemble of convection permitting RCM simulations at 3 km resolution. An integration with official population counts and projections yields humid heat exposure estimates. Beyond spatio-temporal trends, the analysis decomposes the drivers of change into three components: (i) climate change, (ii) population growth or decline, and (iii) demographic ageing.Data analysis for the reference period revealed pronounced spatial disparities: average annual humid heat days peak in Berlin and Brandenburg, whereas humid heat is most seldom in Thuringia and Schleswig-Holstein. While population densities are the highest in the three German city states and lowest in the eastern part of Germany, this pattern is also reflected in the proportion of senior citizens. By combining humid heat frequency, population, and elderly share, we derive the number of “senior citizen humid heat events.” In the reference period, this indicator is dominated by population distribution resulting in maximum exposure in Berlin, Hamburg and Bremen. Preliminary results for +2 °C global warming suggest significant changes in climatic hotspots. Ongoing work will assess how these and other spatial patterns are expected to propagate in detail, before quantifying the relative contributions of climate, population, and demographic change to future humid heat exposure in Germany.

  • Open Access

    Past hydroclimate extremes in Europe driven by Atlantic jet stream and recurrent weather patterns

    by Stefan Brönnimann, Jörg Franke, Veronika Valler, Ralf Hand, Eric Samakinwa, Elin Lundstad, Angela-Maria Burgdorf, Laura Lipfert, Lucas Pfister, Noemi Imfeld, et al.

    The jet stream over the Atlantic–European sector is relevant for weather and climate in Europe. It generates temperature extremes and steers moisture and flood-propelling weather systems to Europe or facilitates the development of atmospheric blocks, which can lead to drought. Ongoing climate change may alter the jet characteristics, affecting weather extremes. However, little is known about the past interannual-to-decadal variability of the jet stream. Here we analyse the strength, tilt and latitude of the Atlantic–European jet from 1421 to 2023 in an ensemble of monthly and daily reconstructions of atmospheric fields. We compare the variability of these jet indices with blocking frequency and cyclonic activity data and with drought and flood reconstructions in Europe. Summer drought is enhanced in Central Europe in periods with a poleward-shifted jet. An equatorward-shifted jet associated with decreased blocking leads to frequent floods in Western Europe and the Alps, particularly in winter. Recurrent weather patterns causing floods often characterize an entire season, such that an association between peak discharge and jet indices is seen on seasonal or even annual scales. Jet strength and tilt are significantly influenced by volcanic eruptions. Our 600-year perspective shows that recent changes in the jet indices are within the past variability and cannot be drivers of increasing flood and drought frequency.


  • Open Access

    ModE-Sim – a medium-sized atmospheric general circulation model (AGCM) ensemble to study climate variability during the modern era (1420 to 2009)

    by Ralf Hand, Eric Samakinwa, Laura Lipfert, Stefan Brönnimann

    We introduce ModE-Sim (Modern Era SIMulations), a medium-sized ensemble of simulations with the atmospheric general circulation model ECHAM6 in its LR (low-resolution) version (T63; approx. 1.8∘ horizontal grid width with 47 vertical levels). At the lower boundary we use prescribed sea surface temperatures and sea ice that reflect observed values while accounting for uncertainties in these. Furthermore we use radiative forcings that also reflect observed values while accounting for uncertainties in the timing and strength of volcanic eruptions. The simulations cover the period from 1420 to 2009. With 60 ensemble members between 1420 and 1850 and 36 ensemble members from 1850 to 2009, ModE-Sim consists of 31 620 simulated years in total. ModE-Sim is suitable for many applications as its various subsets can be used as initial-condition and boundary-condition ensembles to study climate variability. The main intention of this paper is to give a comprehensive description of the experimental setup of ModE-Sim and to provide an evaluation, mainly focusing on the two key variables, 2 m temperature and precipitation. We demonstrate ModE-Sim's ability to represent their mean state, to produce a reasonable response to external forcings, and to sample internal variability. Through the example of heat waves, we show that the ensemble is even capable of capturing certain types of extreme events.


  • Open Access

    Comment on egusphere-2023-209

    by Ralf Hand, Eric Samakinwa, Laura Lipfert, Stefan Brönnimann

    We introduce ModE-Sim, a medium size ensemble of simulations with the atmospheric general circulation model ECHAM6 in its LR version (T63/approx. 1.8° horizontal with 47 vertical levels) that covers the period from 1420 to 2009. With 60 ensemble members between 1420 and 1850 and 36 ensemble members from 1850 to 2009 ModE-Sim consists of 31620 simulated years in total. The dataset forms the input for a data assimilation procedure that combines historical climate informations with additional constraints from a climate model to produce a novel gridded 3-dimensional dataset of the modern era. Additionally, ModE-Sim on its own is also suitable for many other applications as its various subsets can be used as initial condition and boundary condition ensemble to study climate variability. The main intention of this paper is to give a comprehensive description of the experimental setup of ModE-Sim and to provide an evaluation of the two key variables 2m-temperature and precipitation. We demonstrate ModE-Sims ability to represent their mean state, to produce a reasonable response to external forcings and to sample internal variability. At the example of heat waves we show that the ensemble is even capable of capturing extreme events.

  • Open Access

    Comment on egusphere-2023-209

    by Ralf Hand, Eric Samakinwa, Laura Lipfert, Stefan Brönnimann

    We introduce ModE-Sim, a medium size ensemble of simulations with the atmospheric general circulation model ECHAM6 in its LR version (T63/approx. 1.8° horizontal with 47 vertical levels) that covers the period from 1420 to 2009. With 60 ensemble members between 1420 and 1850 and 36 ensemble members from 1850 to 2009 ModE-Sim consists of 31620 simulated years in total. The dataset forms the input for a data assimilation procedure that combines historical climate informations with additional constraints from a climate model to produce a novel gridded 3-dimensional dataset of the modern era. Additionally, ModE-Sim on its own is also suitable for many other applications as its various subsets can be used as initial condition and boundary condition ensemble to study climate variability. The main intention of this paper is to give a comprehensive description of the experimental setup of ModE-Sim and to provide an evaluation of the two key variables 2m-temperature and precipitation. We demonstrate ModE-Sims ability to represent their mean state, to produce a reasonable response to external forcings and to sample internal variability. At the example of heat waves we show that the ensemble is even capable of capturing extreme events.

  • Open Access

    Comment on egusphere-2023-209

    by Ralf Hand, Eric Samakinwa, Laura Lipfert, Stefan Brönnimann

    We introduce ModE-Sim, a medium size ensemble of simulations with the atmospheric general circulation model ECHAM6 in its LR version (T63/approx. 1.8° horizontal with 47 vertical levels) that covers the period from 1420 to 2009. With 60 ensemble members between 1420 and 1850 and 36 ensemble members from 1850 to 2009 ModE-Sim consists of 31620 simulated years in total. The dataset forms the input for a data assimilation procedure that combines historical climate informations with additional constraints from a climate model to produce a novel gridded 3-dimensional dataset of the modern era. Additionally, ModE-Sim on its own is also suitable for many other applications as its various subsets can be used as initial condition and boundary condition ensemble to study climate variability. The main intention of this paper is to give a comprehensive description of the experimental setup of ModE-Sim and to provide an evaluation of the two key variables 2m-temperature and precipitation. We demonstrate ModE-Sims ability to represent their mean state, to produce a reasonable response to external forcings and to sample internal variability. At the example of heat waves we show that the ensemble is even capable of capturing extreme events.