Xudong Fu

Waste concrete is a large amount of solid waste produced in the process of urban construction and renewal in China. Its resource utilization is of great significance for saving mineral resources and improving urban environmental quality. The present study was designed to investigate the effects of mechanical grinding time on the particle size distribution and activity of recycled waste concrete powder (RWCP). Combined with unconfined compressive strength, slump, electric flux and chloride ion penetration resistance tests, the effects of RWCP on the mechanical properties, working performance and impermeability of concrete were analyzed, and the phase and microstructure of concrete containing RWCP were analyzed by XRD and SEM. The results showed that the RWCP is mainly composed of quartz, gismondine, C₂S, cancrinite and portlandite. The optimum activity of RWCP obtained by ball milling for 45 min was 44.41%. RWCP can improve the fluidity of concrete and shorten the initial setting time of concrete. When the blast furnace slag in the concrete was replaced by the RWCP, the early strength and impermeability of the concrete decreased. When RWCP replaced blast furnace slag by 69.1%, the UCS of the concrete at 1, 3, 7, and 14 d decreased from 9.56, 22.1, 34.1, and 41.2 MPa to 5.9, 14.5, 22.7, and 33.2 MPa, respectively. While RWCP replaced fly ash, the normal strength of concrete increased with the increase in fly ash replacement amount. When RWCP completely replaced FA in concrete, the 28-day strength of the concrete increased from 45.2 MPa to 50.8 MPa. The impermeability results showed that the appropriate substitution of RWCP for fly ash was beneficial to increase the impermeability of concrete while excessive substitution reduced. Based on these results, the RWCP has the potential for large-scale application in the preparation of concrete.

The shaft friction in clay is essential to bearing capacity of pipe piles. Reasonable selection of design methods and parameters is very important for offshore piles. This paper focuses on the current popular vertical load design methods based on undrained strength for pipe piles, especially for offshore piles. Based on the database, the accuracy and reliability of various pile design methods based on undrained strength s_u in clay were reviewed. The small-scale model tests were conducted to evaluate s_u-based methods. For the shortcomings of small-diameter piles in the database, a field test of full-scale offshore pile was carried out and analysed. By comparing the calculated and the measured capacity for each method, the reliability of various design methods is evaluated for large-diameter piles. For the design methods based on undrained strength, it demonstrates the importance and reliability of the determination of undrained strength parameters. In view of the vertical loading conditions of offshore large-diameter steel pipe piles, reasonable suggestions for design methods and parameters determination are given.

With the use of the particle flow code in two dimensions, a fractal model is established with the number of particles of different particle fractions used as the statistics to study the fractal characteristics of particle size distribution. Numerically simulated specimens obtained by four scale methods are subjected to the relative density test and the biaxial compression test to explore the influences of fractal dimension D on the macroscopic and mesomechanical properties of specimens, as well as to study the relationship between fractal dimension D and different mechanical performance indexes. Results show that the particle size distribution of each of the four groups after scale exhibits fractal characteristics, with the fractal dimension D ranging from 1.27 to 2.03. The number of fine particles in the specimen increases with the fractal dimension D, the particle aggregates become more compact, the macroscopic mechanical properties of the specimens are improved, and a linear relationship exists between the fractal dimension D and different mechanical performance indexes. A large fractal dimension D corresponds to a great mesoparticle coordination number.

The cracks are likely to initiate on a lateral loaded pile and would cause greater deflection at the pile head. However, there is a lack of thorough investigation into the effect of cracking on the response of the lateral loaded pile. In this article, a full‐scale field test was carried out to investigate the behavior of Drilled and Postgrouted Concrete Pipe Pile under lateral loads. A novel analysis method for the lateral loaded pile, which can take the cracking effects into consideration, was proposed, and the validity was verified by the test results. With the proposed method, the cracking effects on flexural rigidity, displacement, rotation, and bending moment of the pile were studied. In brief, cracking effect would dramatically reduce the flexural rigidity of the pile, remarkable increase the displacement and rotation of the pile top, and slightly decrease bending moment of the pile. Unambiguously, the results show that the proposed method can excellently predict the response of laterally loaded piles under cracking effects.

Using the model test technology of the rock-socketed pile in soft rock in consideration of the influence of the overburden, the physical model test with different overburden pressure and different rock-socketed depth is carried out. The vertical bearing mechanism and law of the rock-socketed pile in soft rock are analysed through the results of axial force distribution, shaft resistance distribution, load sharing ratio of shaft resistance and base resistance, shaft resistance relationship between shaft resistance and displacement, and relationship between base resistance and displacement, etc. Based on the accurate qualitative analysis of indoor model test results, and combined with the measured data and engineering experience at home and abroad, the vertical bearing characteristics of the rock-socketed pile in soft rock are comprehensively interpreted, and the vertical bearing mechanism and its influencing factors of the rock-socketed pile in soft rock are revealed.

Computed tomography (CT) technology is a kind of nondestructive image reconstruction technology. CT visualization technology is introduced into the physical model test of a single pile, which can visualize a rock-socketed pile in soft rock under different pile top loads. In this article, the visualization process of a model test of a rock-socketed pile in soft rock is carried out by medical CT. The implementation procedure, the composition of the device, and the technical requirements of the test equipment, as well as the CT scanning operation of nondestructive visualization technique of the single pile model test, are introduced in detail. The influence of a marked layer setting, side wall effect, size of the model cylinder, and model pile on the visualization effect of a single pile model test is discussed. The feasibility and reliability of the model test visualization technology of a rock-socketed pile in soft rock are demonstrated by examples, and the failure mode of rock-socketed pile in soft rock is intuitively revealed to be the spherical cavity expansion mode of the pile end.

The main purpose of this study was to establish a data-driven approach and assess its potential for shallow landslide susceptibility mapping of the Shennongjia Forestry District, China. For the data processing, Fisher segmenting was used for the classification of topographical factors (gradient, relief amplitude, plan curvature, and normalized difference vegetation index) and the improved Otsu method was used to determine the buffer length thresholds of the locational factors (proximity to roads, rivers and faults). The computations show that these two objective methods help to avoid the uncertainty caused by the subjective judgments and the obtained thresholds are more consistent with actual conditions. Considering the different data types, the locational and topographical factors were evaluated by fuzzy comprehensive evaluation while the geological factors were evaluated by frequency index, and then the three separate evaluations were combined using radar chart analysis. The validation result shows that the susceptibility map based on a data-driven approach has a high accuracy of prediction and this approach will be salutary for risk mitigation and land-use management in mountainous regions.