Miloš Nikolić
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Miloš Nikolić has a total of 40 co-authors. Here are the top co-authors by number of shared publications:
- Milica Šelmić
University of Belgrade
3 shared publications - Predrag Grozdanović
University of Belgrade , Faculty of Transport and Traffic Engineering , Serbia
3 shared publications Aleksandra Ivanović
2 shared publicationsDušan Teodorović
2 shared publications- Dušan Teodorović
Faculty of Transport and Traffic Engineering, University of Belgrade, Belgrade, Serbia
2 shared publications - Jasenka Rakas
Department of Civil & Environmental Engineering, NEXTOR III, University of California, Berkeley, CA 94720-1710, United States of America
2 shared publications
Latest Publications
- 20 November 2026
- Published by University of Belgrade - Faculty of Transport and Traffic Engineering
MULTI-OBJECTIVE OPTIMIZATION MODEL FOR RAILWAY TUNNEL RESILIENCE MANAGEMENT
Tunnel infrastructure is a critical component of railway transport systems, where disruptions may cause significant safety and operational impacts. This paper proposes a multi-objective binary mixed-integer optimization model for planning and prioritizing tunnel resilience enhancement measures under budget constraints. The model integrates operational impacts, risk reduction, and regulatory compliance within a unified optimization framework solved by a lexicographic approach. Tested on the Vračar railway tunnel, the model identifies a set of measures balancing safety, operational performance, and compliance requirements. Sensitivity analysis shows that different priority rankings of the objective functions produce mutually non-dominated Pareto-optimal solutions, confirming the model's applicability for robust decision-making in tunnel resilience management.
- 20 November 2026
- Published by University of Belgrade - Faculty of Transport and Traffic Engineering
MULTI-OBJECTIVE OPTIMIZATION MODEL FOR RAILWAY TUNNEL RESILIENCE MANAGEMENT
Tunnel infrastructure is a critical component of railway transport systems, where disruptions may cause significant safety and operational impacts. This paper proposes a multi-objective binary mixed-integer optimization model for planning and prioritizing tunnel resilience enhancement measures under budget constraints. The model integrates operational impacts, risk reduction, and regulatory compliance within a unified optimization framework solved by a lexicographic approach. Tested on the Vračar railway tunnel, the model identifies a set of measures balancing safety, operational performance, and compliance requirements. Sensitivity analysis shows that different priority rankings of the objective functions produce mutually non-dominated Pareto-optimal solutions, confirming the model's applicability for robust decision-making in tunnel resilience management.
- Open Access
- 10 November 2025
- Published by IOP Publishing in Environmental Research: Infrastructure and Sustainability
- Vol. 5 (4) , 041001
A model for selecting the best sustainable airport technology alternatives
Air transport is a continually expanding industry, a fact that has become even more evident with the recovery of the aviation industry post-COVID-19. This expansion amplified energy consumption at airports, which was already significantly high. Airport decision-makers are increasingly focusing on improving sustainability and addressing social, economic, and environmental criteria across airports worldwide. In this article, we propose a decision-making model for identifying a sustainable airport technology solution that minimizes the energy consumption of airport lighting while considering economic, emission, and life-cycle criteria. The proposed model combines data envelopment analysis and multi-criteria decision making techniques. We applied the model to the Dallas/Fort Worth International Airport (DFW) as a case study, considering eight lighting technology solutions, each with five luminous flux alternatives. Our model identified the best lighting technology solution for DFW outdoor and indoor environments based on the following criteria: luminous flux, capital costs, life-cycle costs, energy consumption, and emissions (CO 2 e, NO x , SO 2 , and PM 2.5 ). The designed model is customizable to any airport and is applicable to a wide range of airport lighting technologies. In our analysis, Light-Emitting Diode lighting emerged as the most sustainable technology option. It ranked first in most cases due to its balance of high efficacy, long lifespan, low life-cycle cost, low capital cost, and lower emissions across all pollutants.
- 10 November 2025
- Published by IOP Publishing in Environmental Research: Infrastructure and Sustainability
- Vol. 5 (4) , 041001
Open AccessA model for selecting the best sustainable airport technology alternatives
Air transport is a continually expanding industry, a fact that has become even more evident with the recovery of the aviation industry post-COVID-19. This expansion amplified energy consumption at airports, which was already significantly high. Airport decision-makers are increasingly focusing on improving sustainability and addressing social, economic, and environmental criteria across airports worldwide. In this article, we propose a decision-making model for identifying a sustainable airport technology solution that minimizes the energy consumption of airport lighting while considering economic, emission, and life-cycle criteria. The proposed model combines data envelopment analysis and multi-criteria decision making techniques. We applied the model to the Dallas/Fort Worth International Airport (DFW) as a case study, considering eight lighting technology solutions, each with five luminous flux alternatives. Our model identified the best lighting technology solution for DFW outdoor and indoor environments based on the following criteria: luminous flux, capital costs, life-cycle costs, energy consumption, and emissions (CO 2 e, NO x , SO 2 , and PM 2.5 ). The designed model is customizable to any airport and is applicable to a wide range of airport lighting technologies. In our analysis, Light-Emitting Diode lighting emerged as the most sustainable technology option. It ranked first in most cases due to its balance of high efficacy, long lifespan, low life-cycle cost, low capital cost, and lower emissions across all pollutants.
- Open Access
- 1 January 2025
- Published by Centre for Evaluation in Education and Science (CEON/CEES) in Vojnotehnicki glasnik
- Vol. 73 (2) , 496-518
Planning vehicle routes to optimize fuel consumption
Introduction/purpose: Models developed for routing transport vehicles with an environmental focus are predominantly dedicated to reverse logistics or transporting environmentally hazardous cargo. Few models in the relevant literature consider the ecological factors for routing vehicles involved in the distribution of consumer goods. Methods: This paper presents a model for planning vehicle routes to optimize fuel consumption, considering the time windows required for service and payload capacity of vehicles. A heuristic algorithm was developed to minimize fuel consumption. A Simulated Annealing metaheuristic was applied to enhance the solutions obtained by the proposed heuristic. Results: The results from the heuristic algorithm for fuel consumption minimization and the improved results using the Simulated Annealing metaheuristic are presented. All tests were conducted on Solomons instances. Conclusion: The developed approach to vehicle routing ensures a compromise between transport companies and ecology. The results show that applying this approach can simultaneously minimize the costs of the transport company and CO2 emissions.
- 1 January 2025
- Published by Centre for Evaluation in Education and Science (CEON/CEES) in Vojnotehnicki glasnik
- Vol. 73 (2) , 496-518
Open AccessPlanning vehicle routes to optimize fuel consumption
Introduction/purpose: Models developed for routing transport vehicles with an environmental focus are predominantly dedicated to reverse logistics or transporting environmentally hazardous cargo. Few models in the relevant literature consider the ecological factors for routing vehicles involved in the distribution of consumer goods. Methods: This paper presents a model for planning vehicle routes to optimize fuel consumption, considering the time windows required for service and payload capacity of vehicles. A heuristic algorithm was developed to minimize fuel consumption. A Simulated Annealing metaheuristic was applied to enhance the solutions obtained by the proposed heuristic. Results: The results from the heuristic algorithm for fuel consumption minimization and the improved results using the Simulated Annealing metaheuristic are presented. All tests were conducted on Solomons instances. Conclusion: The developed approach to vehicle routing ensures a compromise between transport companies and ecology. The results show that applying this approach can simultaneously minimize the costs of the transport company and CO2 emissions.
- 3 October 2024
- Published by Taylor & Francis in Engineering Optimization
- Vol. 57 (10) , 2649-2674
A metaheuristic-based optimization model for flight procedure design
- 3 October 2024
- Published by Taylor & Francis in Engineering Optimization
- Vol. 57 (10) , 2649-2674
A metaheuristic-based optimization model for flight procedure design
- Open Access
- 30 September 2024
- Published by The Road Association of Serbia Via-vita in Put i saobraćaj
- Vol. 70 (3) , 47-53
Determining the required number of base stations for winter road maintenance and their locations by integer linear programming
Cold weather and precipitation that occur even in the winter can significantly threaten the normal functioning of road traffic. Therefore, winter road maintenance activities are significant and need to be planned. Some of the decisions related to winter road maintenance can include determining the number and location of base stations, determining the structure of the vehicle fleet, defining the amount of road-spreading material that needs to be procured, etc. This paper focused on determining the number and locations of base stations for winter road maintenance. This is an important problem of a strategic nature, which was solved in two steps in the paper. In the first step, the minimum required number of base stations is determined to cover the entire observed region. In the second step, specific locations of facilities are determined, to minimize the total distance that vehicles need to travel during road maintenance. In both steps, the solution is performed using integer linear programming. In the paper, the model was tested using the example of road maintenance in the Banat district. Excel Solver was used to solve integer linear programs.
- 30 September 2024
- Published by The Road Association of Serbia Via-vita in Put i saobraćaj
- Vol. 70 (3) , 47-53
Open AccessDetermining the required number of base stations for winter road maintenance and their locations by integer linear programming
Cold weather and precipitation that occur even in the winter can significantly threaten the normal functioning of road traffic. Therefore, winter road maintenance activities are significant and need to be planned. Some of the decisions related to winter road maintenance can include determining the number and location of base stations, determining the structure of the vehicle fleet, defining the amount of road-spreading material that needs to be procured, etc. This paper focused on determining the number and locations of base stations for winter road maintenance. This is an important problem of a strategic nature, which was solved in two steps in the paper. In the first step, the minimum required number of base stations is determined to cover the entire observed region. In the second step, specific locations of facilities are determined, to minimize the total distance that vehicles need to travel during road maintenance. In both steps, the solution is performed using integer linear programming. In the paper, the model was tested using the example of road maintenance in the Banat district. Excel Solver was used to solve integer linear programs.
- Open Access
- 1 March 2024
- Published by Walter de Gruyter GmbH in Economic Themes
- Vol. 62 (1) , 1-17
Prediction of the Freight Train Energy Consumption With the Time Series Models
As the backbone of environmentally sustainable transport, rail transport is one of the most preferred modes since it emits three times less CO2 and particulates per ton-mile than road transport. Besides these ecological benefits, rail transport is the most cost-effective. The global energy crisis creates significant problems and challenges for rail companies when planning transportation activity costs. Companies must carefully consider energy spending and ways to decrease it. In this paper, the authors considered the problem of predicting freight train energy consumption to help companies plan their budgets. For that purpose, the authors applied three time series methods: the moving average, the weighted moving average, and the exponential smoothing method. These methods were applied to actual data collected in the Republic of Serbia. The results showed that the exponential smoothing method performs better than the other two approaches. Nevertheless, there is still room for improvement in the presented approaches, such as fine-tuning the parameters used and comparing them to other relevant techniques used for the forecast.
- 1 March 2024
- Published by Walter de Gruyter GmbH in Economic Themes
- Vol. 62 (1) , 1-17
Open AccessPrediction of the Freight Train Energy Consumption With the Time Series Models
As the backbone of environmentally sustainable transport, rail transport is one of the most preferred modes since it emits three times less CO2 and particulates per ton-mile than road transport. Besides these ecological benefits, rail transport is the most cost-effective. The global energy crisis creates significant problems and challenges for rail companies when planning transportation activity costs. Companies must carefully consider energy spending and ways to decrease it. In this paper, the authors considered the problem of predicting freight train energy consumption to help companies plan their budgets. For that purpose, the authors applied three time series methods: the moving average, the weighted moving average, and the exponential smoothing method. These methods were applied to actual data collected in the Republic of Serbia. The results showed that the exponential smoothing method performs better than the other two approaches. Nevertheless, there is still room for improvement in the presented approaches, such as fine-tuning the parameters used and comparing them to other relevant techniques used for the forecast.
- Open Access
- 22 November 2023
- Published by Elsevier in Engineering Applications of Artificial Intelligence
- Vol. 128
Formulation of the airport collaborative gate allocation problem and the Bee Colony Optimization solution approach
- 22 November 2023
- Published by Elsevier in Engineering Applications of Artificial Intelligence
- Vol. 128
Open AccessFormulation of the airport collaborative gate allocation problem and the Bee Colony Optimization solution approach
- Open Access
A New Model for Determining the Price of Product Distribution Based on Fuzzy Logic
Background: Distribution is a very important part of logistics and an activity that is present in every area today. One of the basic problems in distribution is how to correctly determine its price. For this reason, this paper presents a model created to determine the price of the product distribution service. Methods: The model first determines the base of the distribution price, which consists of a fixed and a variable part. The fixed part depends on the distance traveled, and the variable part is defined by fuzzy logic. To determine the variable part, a fuzzy logic system was created that depends on four input variables: inaccessibility of the client’s location, driving time, quantity of goods, and unloading time. The reason for applying fuzzy logic is its ability to set the distribution price for each client individually, without generalization. Certain criteria that affect the distribution price such as type of vehicle, quality of service, and type of goods, which could not be represented by fuzzy numbers, were considered as additional corrective factors. Results: The model was tested on hypothetical examples created by the authors from this field and on examples of company that provide distribution services. In the case study, a comparison was made between the distribution price obtained by applying the created fuzzy logic model and the price defined by the model used by the company "X". Conclusions: The model created in this way enables easy adaptation to constant changes in the prices of oil derivatives due to the COVID-19 pandemic and the war but also considers various unpredictable circumstances that may occur during delivery such as roadworks, crowds, vehicle breakdown, location inaccessibility due to bad weather, etc.
Open AccessA New Model for Determining the Price of Product Distribution Based on Fuzzy Logic
Background: Distribution is a very important part of logistics and an activity that is present in every area today. One of the basic problems in distribution is how to correctly determine its price. For this reason, this paper presents a model created to determine the price of the product distribution service. Methods: The model first determines the base of the distribution price, which consists of a fixed and a variable part. The fixed part depends on the distance traveled, and the variable part is defined by fuzzy logic. To determine the variable part, a fuzzy logic system was created that depends on four input variables: inaccessibility of the client’s location, driving time, quantity of goods, and unloading time. The reason for applying fuzzy logic is its ability to set the distribution price for each client individually, without generalization. Certain criteria that affect the distribution price such as type of vehicle, quality of service, and type of goods, which could not be represented by fuzzy numbers, were considered as additional corrective factors. Results: The model was tested on hypothetical examples created by the authors from this field and on examples of company that provide distribution services. In the case study, a comparison was made between the distribution price obtained by applying the created fuzzy logic model and the price defined by the model used by the company "X". Conclusions: The model created in this way enables easy adaptation to constant changes in the prices of oil derivatives due to the COVID-19 pandemic and the war but also considers various unpredictable circumstances that may occur during delivery such as roadworks, crowds, vehicle breakdown, location inaccessibility due to bad weather, etc.
- Open Access
- 1 March 2023
- Published by Walter de Gruyter GmbH in Economic Themes
- Vol. 61 (1) , 1-18
Work Zone Scheduling Problem in the Urban Traffic Networks
A significant part of highway and street congestion is produced by work zones. Depending on the type of construction and/or rehabilitation activity, street capacity could be significantly decreased, or the street could be completely closed. The work zone generates traffic delays in the street where maintenance is performed. Additionally, the work zone generates additional traffic on the neighboring streets, since many drivers change their routes. There are numerous possible work zone schedules. The total travel time of all network users highly depends on the chosen work zones schedule. Work zones scheduling problem has a natural nested structure that requires to be modeled as a bi-level problem. We considered the bi-level work zones scheduling problem. The objective function in the upper level, which we try to minimize, represents the total travel time of all network users. Relations in the lower level, help us to compute User Equilibrium flows. The proposed solution to the problem is based on the combination of Integer Programming and a heuristic traffic assignment algorithm. The output of the developed model consists of the start time of each work zone. The Sioux Falls benchmark network is used to illustrate the proposed procedures and the achieved performances.
- 1 March 2023
- Published by Walter de Gruyter GmbH in Economic Themes
- Vol. 61 (1) , 1-18
Open AccessWork Zone Scheduling Problem in the Urban Traffic Networks
A significant part of highway and street congestion is produced by work zones. Depending on the type of construction and/or rehabilitation activity, street capacity could be significantly decreased, or the street could be completely closed. The work zone generates traffic delays in the street where maintenance is performed. Additionally, the work zone generates additional traffic on the neighboring streets, since many drivers change their routes. There are numerous possible work zone schedules. The total travel time of all network users highly depends on the chosen work zones schedule. Work zones scheduling problem has a natural nested structure that requires to be modeled as a bi-level problem. We considered the bi-level work zones scheduling problem. The objective function in the upper level, which we try to minimize, represents the total travel time of all network users. Relations in the lower level, help us to compute User Equilibrium flows. The proposed solution to the problem is based on the combination of Integer Programming and a heuristic traffic assignment algorithm. The output of the developed model consists of the start time of each work zone. The Sioux Falls benchmark network is used to illustrate the proposed procedures and the achieved performances.