YMYuan Ma

Yuan Ma

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Yuan Ma has a total of 23 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Enhancing aerodynamic performance of high-speed trains under crosswind conditions: Analysis of windproof steps

    by Masoud Mohebbi, Yuan Ma, Rasul Mohebbi

    This research investigates the impact of crosswind conditions on the aerodynamic performance of high-speed trains and explores the effectiveness of windproof steps in mitigating the associated adverse effects. Using advanced numerical simulations based on the lattice Boltzmann method, the study examines the complex flow interactions between windproof steps and trains, considering various windproof device heights and configurations. The results reveal that barrier height plays a crucial role in determining flow patterns and aerodynamic coefficients. The adoption of windproof steps leads to significant reductions in side force coefficients, with the 2 m windproof steps demonstrating superior performance. Moreover, the implementation of windproof steps effectively decreases the lift force coefficient, enhancing the overall stability of the train. Detailed analyses of moment coefficients, including rolling moment and lee-rolling moment, highlight consistent trends influenced by barrier height and type. These findings provide valuable insights for the design and optimization of windproof steps, enabling railway engineers to enhance the aerodynamic performance and safety of high-speed trains operating in crosswind conditions. The research outcomes contribute to the advancement of railway engineering practices, ensuring efficient and sustainable transportation systems.


  • Performance analysis of leaf-vein-inspired heat sink for enhanced nanofluid heat transfer

    by Rasul Mohebbi, Mohamed Bechir Ben Hamida, Yuan Ma

    This study investigates the heat transfer enhancement potential of leaf-vein-inspired heat sink structures using hybrid nanofluids under natural convection, which addresses a critical gap in thermal management technologies. Five distinct cases with evolving fractal geometries are analyzed through numerical simulations, evaluating the impact of the Rayleigh number (Ra) and nanoparticle volume fraction (φ) on the average Nusselt number (Nuavg). Results demonstrate that at Ra = 106, the geometric complexity progressively increases from case 1 to case 4, with Nuavg peaking at 44.3 for case 4, driven by stronger convection and improved surface area utilization. However, case 5, with four levels of branching, exhibits a decline in Nuavg, suggesting an optimal branching threshold beyond which the increased geometric complexity reduces efficiency. The addition of nanoparticles enhances thermal conductivity, although the improvement tends to diminish at higher concentrations. The numerical model developed in this study has been validated against previous studies, confirming the robustness of the proposed approach. These findings provide valuable insights for the design of efficient cooling systems for microelectronics and energy applications, thereby paving the way for more advanced thermal management solutions.


  • Three-dimensional flow structures through submerged vegetation patches with uniform and non-uniform stem spacing in an open channel

    by Yuan Ma, Yuan-Heng Zhang, Huan-Feng Duan

    This study uses large eddy simulation combined with the lattice Boltzmann method to analyze the three-dimensional flow structures through and around submerged finite vegetation patches in an open channel. Vegetation patches, modeled as arrays of circular stems arranged in alignment with varying streamwise and spanwise gaps, are distributed using three schemes: increasing gap, uniform gap, and decreasing gap along the channel. The findings reveal that increasing stem density results in smaller wake regions and a shift from large, organized coherent structures to smaller, more numerous and chaotic eddies. When both the streamwise and spanwise gaps are relatively small, the patch acts as a single stem with a complete horseshoe vortex and no detached vortices within the patch. On one hand, when the streamwise gap increases under a relatively small spanwise gap situation, the shear layers appear with reduced vortex shedding frequency and drag coefficient and allowing lateral fluid passage. On the other hand, as the spanwise gap also increases, it weakens the interactions between vortices generated from the adjacent stems, forming distinct horseshoe vortices and reducing the drag coefficient. Furthermore, for fixed vegetation patch dimensions, adjusting stem distribution along the channel alters flow structures by modifying wake length and vortex shedding patterns, with the drag coefficient decreasing from the increasing gap scheme (denser upstream, larger Cd), to uniform gap scheme (moderate Cd), and to the decreasing gap scheme (less dense upstream, smaller Cd), reflecting reduced flow resistance with upstream sparsity. Based on the results and findings of this study, lower upstream vegetation density is recommended for achieving reduced drag.

  • Natural convection heat transfer enhancement of hybrid nanofluids in snowflake-inspired heat sink structures

    by Rasul Mohebbi, Mohamed Bechir Ben Hamida, Yuan Ma, Masoud Mohebbi

    With the continuous growth of energy demand and the increasing urgency of environmental protection, enhancing energy conversion efficiency and reducing energy consumption have become particularly important. Nanotechnology, especially nanofluids, has shown great potential in improving thermal conductivity and heat transfer performance. This study investigates the enhancement of natural convection heat transfer using multi-walled carbon nanotube-Fe3O4/water hybrid nanofluids in different radiator structures through numerical simulations. The study considers various radiator geometries (circular and snowflake-shaped), nanoparticle volume fractions (0, 0.001, and 0.003), and Rayleigh numbers (Ra = 103–106). The results indicate that the introduction of nanoparticles enhances the average Nusselt number by up to 13% at the highest nanoparticle volume fraction compared to the base fluid. The dense-branch snowflake-shaped radiator (DB case) demonstrates superior heat transfer performance, achieving a 23% higher Nusselt number than the circular design at high Ra number. Furthermore, as the Ra increases, convective heat transfer is significantly enhanced. The study highlights the combined influence of nanofluids and geometric optimization in improving heat transfer and provides quantitative insights for designing efficient thermal management systems.


  • Open Access

    Hybrid Nanoparticle-Enhanced Fluid Flow and Heat Transfer Behaviors in a Parabolic Cavity with a Heat Source

    by Rasul Mohebbi, Yuan Ma

    Natural convection of nanofluids holds considerable importance in both scientific research and engineering applications due to their exceptional heat transfer capabilities, which occur spontaneously without the need for additional energy input. In this paper, the natural convection of nanofluid inside a parabolic cavity containing a hot obstacle is studied numerically. The shape of the hot obstacle is selected as either circular or elliptical. Additionally, the effects of the Rayleigh number, nanoparticle volume fraction, and the position of the heat source are investigated. The computational fluid dynamics model was computed using COMSOL Multiphysics. It is observed that the average Nusselt number tends to increase with both the Rayleigh number and the volume fraction of nanoparticles in the fluid. When the heat source moves from the bottom region to the top area, the heat transfer performance of the heat source increases. When Ra ≤ 105, the cases with circular heat sources exhibit better heat transfer performance than those with elliptical heat sources. However, at Ra = 106, the average Nusselt number of the elliptical heat source is higher than that of the circular one.


  • Vortex synchronization-enabled heat-transfer enhancement in a channel with backward- and forward-facing steps

    by Yuan Ma, Feng Ren, Hui Tang, Chenglei Wang

    A channel with one backward-facing step and one forward-facing step is a typical configuration in engineering applications. In the channel, good heat transfer performance is often required, and the enhancement is usually achieved by employing different passive control methods, such as modification of geometric configuration or application of nanofluid. However, the other control method, i.e., active flow control (AFC), which is likely more effective, has been rarely applied in such a scenario. This study aims to bridge this gap by exploring how a rigid plate affects the heat transfer of the channel. The plate either is stationary or actively rotates, corresponding to passive flow control or AFC. The influences of the horizontal position of the plate (S) and its orientation angle (θ) on the heat transfer performance are studied when the plate is stationary to provide a baseline. Compared to the baseline, the effects of S, θ, and the rotation frequency (fr) are revealed when the plate undergoes a sinusoidal rotation. Such a thermo-fluid dynamic problem is numerically simulated by the immersed-boundary lattice Boltzmann method. The results show that the plate can improve the heat transfer performance no matter whether it rotates or not, compared to the case without a plate. The rotating plate outperforms the stationary one when θ and fr are properly chosen at each S. Substantial improvement can be achieved when vortex synchronization or resonance occurs in the channel, i.e., when the natural vortex shedding frequency is close or equal to fr.


  • Open Access

    Enhancement of an Air-Cooled Battery Thermal Management System Using Liquid Cooling with CuO and Al2O3 Nanofluids under Steady-State and Transient Conditions

    by Peyman Soleymani, Ehsan Saffarifard, Jalal Jahanpanah, Meisam Babaie, Amir Nourian, Rasul Mohebbi, Zineb Aakcha, Yuan Ma

    Lithium-ion batteries are a crucial part of transportation electrification. Various battery thermal management systems (BTMS) are employed in electric vehicles for safe and optimum battery operation. With the advancement in power demand and battery technology, there is an increasing interest in enhancing BTMS’ performance. Liquid cooling is gaining a lot of attention recently due to its higher heat capacity compared to air. In this study, an air-cooled BTMS is replaced by a liquid cooled with nanoparticles, and the impacts of different nanoparticles and flow chrematistics are modeled. Furthermore, a unique approach that involves transient analysis is employed. The effects of nanofluid in enhancing the thermal performance of lithium-ion batteries are assessed for two types of nanoparticles (CuO and Al2O3) at four different volume concentrations (0.5%, 2%, 3%, and 5%) and three fluid velocities (0.05, 0.075, and 0.1 m/s). To simulate fluid flow behavior and analyze the temperature distribution within the battery pack, a conventional k-ε turbulence model is used. The results indicate that the cooling efficiency of the system can be enhanced by introducing a 5% volume concentration of nanofluids at a lower fluid velocity as compared to pure liquid. Al2O3 and CuO reduce the temperature by 7.89% and 4.73% for the 5% volume concentration, respectively. From transient analysis, it is also found that for 600 s of operation at the highest power, the cell temperature is within the safe range for the selected vehicle with nanofluid cooling. The findings from this study are expected to contribute to improving BTMS by quantifying the benefits of using nanofluids for battery cooling under both steady-state and transient conditions.