JRJulio Alejandro Rodríguez-González

Julio Alejandro Rodríguez-González

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Julio Alejandro Rodríguez-González has a total of 39 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Eco-friendly smart strain sensors: Influence of Cu-nanoparticles on electrical and piezo-resistive performance of sustainable sisal fiber-reinforced thermoplastic elastomers

    by Antonio Salomón Morales-Torres, José Antonio Juárez Loyola, Julio Alejandro Rodríguez-González, Edgar Adrián Franco-Urquiza, Celso E. Cruz-González

    The development of sustainable self-sensing composites remains limited by the lack of recyclable polymer matrices reinforced with natural fibers that can simultaneously deliver adequate mechanical performance and reliable electrical functionality. Currently, a significant understanding of the mechanical behavior of fiber-reinforced composite structures, but an important gap in knowledge remains in the way Cu nanoparticles influence the electromechanical performance of thermoplastic elastomer/sisal composites. Consequently, this work aims to bridge the gap in understanding the effect of Cu nanoparticles on the electrical conductivity and piezo-resistive behavior of these composite materials. Sandwich laminates were manufactured using thermoplastic elastomer as matrix and sisal fibers coated with copper nanoparticles whose molar concentrations ranged from 0.2 to 0.8 M. The test specimens were tested via FTIR, scanning electron microscopy, and electromechanical tensile tests to evaluate piezo-resistive behavior. The microscopic observations showed that the 0.8 M test sample had an even nanoparticle distribution as well as better interlocking. The Young’s modulus reached 0.59 GPa, while 9.64 MPa for tensile strength. Also, electrical conductivity increased proportionally with molarity reching its higher value at 0.8 M (5.30 × 10 −1 S.m −1 ). These findings demonstrate that combining Cu nanoparticle-functionalized sisal fibers with a recyclable thermoplastic elastomer matrix constitutes a promising strategy for developing eco-friendly multifunctional composites for smart sensing applications within a circular economy framework.

  • Recycled basalt fiber-carbon nanotube/epoxy composite with piezoresistive behavior for strain and damage self-sensing

    by Julio Alejandro Rodríguez-González, Víctor Daniel Capetillo-Hernández, Eduardo José-Trujillo, María del Pilar de Urquijo-Ventura, Carlos Rubio-González, José Alfredo Manzo-Preciado

    The growing concern for the environmental has boosted the use of recycled fibers for second life applications. However, achieving recycled fiber reinforced polymers with good mechanical performance remains challenging. Herein, basalt fiber (BF) fabrics were first recovered via solvolysis using hydrogen peroxide and then spray-coated with multiwalled carbon nanotubes (MWCNTs). The resulting recycled BF fabric after spray-coating showed a remarkable reduction in electrical resistance (22.5 kΩ) and a homogeneous coverage distribution of MWCNTs onto their fiber surface. The BF fabrics modified with CNT were used to manufacture recycled basalt fiber reinforced polymer with MWCNTs (BFRP-CNT) by vacuum assisted resin infusion technique and then cut into beam specimens for electromechanical flexural testing. The piezoresistive characterization showed that the change in electrical resistance of the recycled BFRP-CNT composite followed the flexural stress-strain response until composite’s failure and yielded gage factor value of 7.31 for the tensile side and −1.01 for the compressive side, confirming its piezoresistive sensing capability. The findings suggest that the developed recycled BFRP-CNT composite holds promise as an environmentally sustainable material suitable for strain monitoring and damage sensing through the piezoresistive response obtained during monotonic three-point bending up to failure.

  • Inverse Calibration of Constituent Mechanical Properties in GFRP Using the Serial/Parallel Mixing Theory and FEM with Validation via Three-Point Bending Test

    by Eusebio García-Vásquez, José A. Manzo-Preciado, Jairo A. Paredes, Julio A. Rodríguez-González, Marco A. Villareal-Velásquez

  • Thermo-mechanical and flexural behavior of composite laminates remanufactured with recycled basalt fiber fabrics

    by Julio Alejandro Rodríguez-González, Víctor Daniel Capetillo-Hernández, Eduardo José-Trujillo, María del Pilar de Urquijo-Ventura, Gilberto Martínez-Saucedo, José Alfredo Manzo-Preciado

    This work reports the basalt fiber (BF) recycling process via 50 wt.% hydrogen peroxide (H 2 O 2 ) assisted by solvolysis at low temperature (∼75°C) from a virgin basalt fiber reinforced polymer (BFRP) laminate and the remanufacturing of recycled BFRP composites by the vacuum assisted resin infusion. To evaluate the surface state of the recycled BF, morphological analysis and elemental composition were performed using scanning electron microscopy (SEM) with energy dispersive spectroscopy (EDS). SEM imaging demonstrated that the surface of recycled BF exhibits morphological changes, EDS analysis confirms an increase in oxygen content compared with virgin fibers and no change in fiber orientation was observed after the solvolysis process. After that, beam-type specimens were obtained from recycled BFRP laminates to evaluate their fiber volume fraction, thermo-mechanical, and flexural properties. The experimental results were compared with the virgin BFRP composites and showed that the fiber volume fraction and flexural modulus suffered an 11% and 13% decrease, respectively. However, the recycled BFRP composite had an increase of 28% in flexural strength due to the surface modification of basalt fibers during the solvolysis process with H 2 O 2, which increased surface roughness and mechanical interlocking, and no significant change in the glass transition temperature was observed. The recycling process results showed that the recovered BF from the virgin BFRP composites maintain their original woven configuration and can be reused to manufacture new composite laminates, thus promoting the circular economy.


  • Impact of the aging process in composite materials under solid particle impact wear

    by Abel Eslava Hernández, Edgar Ernesto Vera Cárdenas, Armando Irvin Martínez Pérez, Julio Rodríguez González, Carlos Rubio González

    In the present work, the effect of saline water on the tribological properties of laminated composite materials reinforced with marine glass and Kevlar fibers is studied for possible applications in hydrokinetic turbine blades. For the manufacture of the composites, the vacuum-assisted resin infusion process was used. Epoxy, vinylester, and hybrid polymer resins (epoxy with vinylester), reinforced with unidirectional glass fibers, applying on their surfaces layers of 0/90° bidirectional marine glass fiber and plain weave Kevlar fabric were used. The proportion used was 50% fiber and 50% resin. The specimens obtained (40 mm × 30 mm × 4 mm thick) were exposed to an accelerated aging process in saline water at 70°C for 1176 h, all up to the point of moisture saturation, which simulates seawater conditions. For the wear tests, sea sand particles were impacted at a pressure of 4.5 bar, impact angle of 90° and impact speed of 5.8 m/s. A diameter of 10 mm of the nozzle, a distance of 5 mm between nozzle and specimen and a total time exposure of 12 minutes were used. In aged composites, the one with the greatest depth of wear is presented in the VMGF material with 210.51 µm, compared to the EKF material with 31.51 µm, which represents a difference of 85.03%; while, in the unaged composites, the material with the greatest depth of wear is presented in the VMGF, with 606.55 µm, with respect to the EKF, with 84.52 µm, which represents a difference of 86.06%. The results demonstrate that saltwater-aged materials absorb greater impact energy with respect to unaged material, obtaining greater resistance to erosive wear.


  • Damage Evolution Analysis of Seawater Aged Glass Fiber‐ MWCNT /Epoxy Laminates Through Acoustic Emission and Piezoresistivity

    by Carlos Rubio‐González, Julio A. Rodríguez‐González, María del Pilar de Urquijo‐Ventura, Eduardo José‐Trujillo

    An analysis of damage evolution of aged glass fiber epoxy composites subjected to bending loading was performed by the combined use of acoustic emission (AE) and self‐monitoring ability enabled by the incorporation of multiwall carbon nanotube (MWCNT) networks. The acoustic signal analysis was conducted using a classification methodology based on the k‐means algorithm and principal component analysis (PCA). This approach enabled the detection of failure modes including matrix fiber‐matrix separation, matrix failure, fiber rupture, and delamination. The aged samples retained their piezoresistive response, and by monitoring changes in electrical resistance along with key acoustic emission (AE) parameters, it was possible to track specific failure events throughout the damage evolution of the composites. In order to monitor the damage evolution of samples with piezoresistive capability, and similarly to the definition of the sentry function (SF), a pseudo‐SF was proposed, but by utilizing the variation in electrical resistance instead of the cumulative acoustic energy as the SF is normally defined. Damage assessment of the failed specimens was performed through the use of x‐ray computed tomography and scanning electron microscopy (SEM). The collective use of piezoresistivity and AE techniques provides a reference for the structural health monitoring (SHM) of fiber‐reinforced materials in marine applications.


  • Open Access

    Biological testing unification for hemodialysis membranes evaluation: A step towards standardization

    by Mario Adrian Tienda-Vazquez, Paula Arredondo, Ximena Mejía-Delgadillo, Julio Alejandro Rodríguez-González, Jorge Alberto Soto-Cajiga, Ernesto Sabath, Omar Lozano, Yara C. Almanza-Arjona


  • Analysis and structural evaluation of seawater-aged composite tidal turbine blades using multi-walled carbon nanotubes and acoustic emission

    by Eduardo José-Trujillo, Carlos Rubio-González, Julio A. Rodríguez-González

    The main objective of this research was to evaluate the piezoresistive response and mechanical performance of seawater-aged blades manufactured with glass fiber/epoxy resin incorporating multi-walled carbon nanotubes (MWCNTs). MWCNTs content was 0.75 wt. %, which was sufficient to form an electric percolation network. MWCNTs were dispersed in the fiber using the spray-coating method, allowing the entire blade outer surface to gain strain self-sensing capability. Exposure of the blades with and without MWCNT to seawater caused a moisture absorption of 1.67% and 1.56%, respectively. This caused damage such as matrix cracking, and fiber/matrix interfacial debonding. These effects were manifested by an increase in tip displacement of 13% and 1.43% in the blades with and without MWCNTs, also local deformations on the blade increased. The MWCNTs induced a positive effect on piezoresistive capability, resulting in the development of sensitivity to deformation. This showed that MWCNTs in the specified content is efficient for damage detection in complex structural components even after seawater aging while retaining maximum electrical resistance change of 0.45% and 0.26% on the tensile and compressive side, respectively. With acoustic emission (AE), it was confirmed that the presence of MWCNTs acts as toughening mechanisms reducing damage such as micro-cracks in the matrix.


  • Open Access

    Evaluación de GIC en fibra de vidrio/epóxica usando emisión acústica

    by María del Pilar De-Urquijo-Ventura, Carlos Rubio-González, Julio Alejandro Rodríguez-González

    El uso de los materiales compuestos laminados de fibras de vidrio/epóxica ha aumentado en los últimos años debido a sus elevadas propiedades de sinergia logradas. Sin embargo, estos materiales tienden a sufrir delaminación lo cual puede propiciar fallas catastróficas en componentes estructurales como los álabes de turbinas eólicas, hélices de helicópteros o fuselajes de avión.Con esta motivación, en este trabajo se presenta una manera innovadora de evaluar el inicio y propagación de la delaminación en modo I por medio de dos Sensores de Emisión Acústica (SEA) que pueden monitorear simultáneamente y en tiempo real la delaminación de especímenes de fibras de vidrio/epóxica ensayadas de acuerdo con la norma ASTM D5528. Las posiciones de los SEA en la probeta son: SEA10 y SEA75 localizados a 10 y 75 mm antes y después del inicio de la grieta, respectivamente. Los resultados de la medición de la delaminación modo I mediante EA estuvieron en concordancia con los resultados obtenidos por los métodos de la norma ASTM; siendo el SEA10 el que mostró una mayor precisión en la detección de la delaminación.

  • Effect of seawater aging on the erosive wear response of aramid fiber reinforced composites

    by Abel Eslava-Hernández, Julio A Rodríguez-González, Carlos Rubio-González, Armando I Martínez-Pérez, Edgar E Vera-Cárdenas

    This study presents the effect caused by the saline environment (artificial seawater) on the physical and tribological properties of laminated composite materials reinforced with aramid fibers when they are subjected to erosive wear by sand particles. Composite materials made by epoxy resin and reinforced with glass fiber, carbon fiber and hybrid fiber (aramid with carbon) were studied. The laminates were superficially reinforced with layers of Kevlar fiber and prepared by the vacuum-assisted resin infusion process. The samples were subjected to a seawater accelerated aging process at 70°C for 1122 h. To reproduce erosive wear conditions of marine structural components, sea sand was used as solid particle under conditions of 4.5 bar of pressure, impact speed of 4.7 m/s and impact angle of 90°. The results showed that aged materials absorb more impact energy with respect to unaged counterparts, causing less material loss and a less depth in the wear track. The information generated by this research work may serve for the design and durability analysis of marine structures such as tidal turbine blades.