Andrii Vlasov
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Andrii Vlasov has a total of 103 co-authors. Here are the top co-authors by number of shared publications:
- Olha Matiushchenko
State Scientific Research Institute of Armament and Military Equipment Testing and Certification
5 shared publications - I. Gukov4 shared publications
О.г. Матющенко
State Scientific Research Institute of Armament and Military Equipment Testing and Certification, Cherkasy, Ukraine
4 shared publicationsІ.о. Жуков
State Scientific Research Institute of Armament and Military Equipment Testing and Certification, Cherkasy, Ukraine
3 shared publications- Oleksandr Milov
National Technical University Kharkiv Polytechnic Institute,Department of Cyber Security,Kharkiv,Ukraine
2 shared publications - Olha Korol
National Technical University “Kharkiv Polytechnic Institute
2 shared publications
Latest Publications
- Open Access
- 1 October 2025
- Published by State Scientific Research Institute of Armament and Military Equipment Testing and Certification in Наукові праці Державного науково-дослідного інституту випробувань і сертифікації озброєння та військової техніки
- No. 3(25),p. 21-26
DEVELOPMENT OF THE METHOD FOR ASSESSING THE COMPATIBILITY OF THE AIR FORCE MANAGEMENT SYSTEM WITH THE MANAGEMENT SYSTEMS OF THE ARMED FORCES OF NATO COUNTRIES
The article proposes a methodology for evaluating the compatibility of the control system of the Air Force of the Armed Forces of Ukraine with the control systems of the armed forces of NATO countries, and improved the methodological apparatus for evaluating the effectiveness of the control systems of the Air Force when performing compatible tasks based on the experience of the russian-ukrainian war. For the synthesis of management organization options, it is advisable to use scenario analysis. To evaluate the effectiveness of the control system, it is proposed to use methods of solving multi-criteria problems and analogies. Comparative assessment of the degree of compatibility of management systems was carried out using interval and expert weighted assessment methods. In order to compare variants of control system models, it is proposed to use expert evaluations based on the methods of the representative theory of measurements. The developed methodical approaches to the evaluation of management systems and the comparison of their options made it possible to proceed to the generation of recommendations on the formation of a prospective management system of the Air Force of the Armed Forces of Ukraine. The obtained results make it possible to directly use the methods during the organization and management of the Air Forces of the Armed Forces of Ukraine, to substantiate recommendations for improving the effectiveness of the organization of management during the preparation and execution of tasks in operations (combat operations).
- 1 October 2025
- Published by State Scientific Research Institute of Armament and Military Equipment Testing and Certification in Наукові праці Державного науково-дослідного інституту випробувань і сертифікації озброєння та військової техніки
- No. 3(25),p. 21-26
Open AccessDEVELOPMENT OF THE METHOD FOR ASSESSING THE COMPATIBILITY OF THE AIR FORCE MANAGEMENT SYSTEM WITH THE MANAGEMENT SYSTEMS OF THE ARMED FORCES OF NATO COUNTRIES
The article proposes a methodology for evaluating the compatibility of the control system of the Air Force of the Armed Forces of Ukraine with the control systems of the armed forces of NATO countries, and improved the methodological apparatus for evaluating the effectiveness of the control systems of the Air Force when performing compatible tasks based on the experience of the russian-ukrainian war. For the synthesis of management organization options, it is advisable to use scenario analysis. To evaluate the effectiveness of the control system, it is proposed to use methods of solving multi-criteria problems and analogies. Comparative assessment of the degree of compatibility of management systems was carried out using interval and expert weighted assessment methods. In order to compare variants of control system models, it is proposed to use expert evaluations based on the methods of the representative theory of measurements. The developed methodical approaches to the evaluation of management systems and the comparison of their options made it possible to proceed to the generation of recommendations on the formation of a prospective management system of the Air Force of the Armed Forces of Ukraine. The obtained results make it possible to directly use the methods during the organization and management of the Air Forces of the Armed Forces of Ukraine, to substantiate recommendations for improving the effectiveness of the organization of management during the preparation and execution of tasks in operations (combat operations).
- Open Access
- 22 August 2025
- Published by European Scientific Platform (Publications) in Grail of Science
- No. 55,p. 489-501
ОСОБЛИВОСТІ ПОБУДОВИ НОМОГРАМИ РОЗРАХУНКУ ХАРАКТЕРИСТИК ЛАЗЕРНОГО ВИПРОМІНЮВАННЯ ДЛЯ ПЕРЕДАЧІ ДАНИХ ПРИ ОРГАНІЗАЦІЇ КОМУНІКАЦІЙ В КОМП'ЮТЕРНИХ МЕРЕЖАХ
В статті розглядаються особливості побудови номограми розрахунку характеристик лазерного випромінювання для передачі даних при організації комунікацій в комп'ютерних мережах. Розглянуто комп'ютерні мережі та класифікацію середовищ передачі даних. Передача даних за допомогою лазерного випромінювання через атмосферу забезпечує передачу великих об’ємів інформації з високою надійністю на відстанях у десятках кілометрів. За методом математичного моделювання можливо побудувати номограму розрахунку характеристик лазерного випромінювання для передачі даних та виявити взаємозв'язок між основними конструктивними характеристиками та параметрами лазерного випромінювання.
- 22 August 2025
- Published by European Scientific Platform (Publications) in Grail of Science
- No. 55,p. 489-501
Open AccessОСОБЛИВОСТІ ПОБУДОВИ НОМОГРАМИ РОЗРАХУНКУ ХАРАКТЕРИСТИК ЛАЗЕРНОГО ВИПРОМІНЮВАННЯ ДЛЯ ПЕРЕДАЧІ ДАНИХ ПРИ ОРГАНІЗАЦІЇ КОМУНІКАЦІЙ В КОМП'ЮТЕРНИХ МЕРЕЖАХ
В статті розглядаються особливості побудови номограми розрахунку характеристик лазерного випромінювання для передачі даних при організації комунікацій в комп'ютерних мережах. Розглянуто комп'ютерні мережі та класифікацію середовищ передачі даних. Передача даних за допомогою лазерного випромінювання через атмосферу забезпечує передачу великих об’ємів інформації з високою надійністю на відстанях у десятках кілометрів. За методом математичного моделювання можливо побудувати номограму розрахунку характеристик лазерного випромінювання для передачі даних та виявити взаємозв'язок між основними конструктивними характеристиками та параметрами лазерного випромінювання.
- Open Access
- 21 March 2025
- Published by European Scientific Platform (Publications) in Grail of Science
- No. 50,p. 551-559
ОСОБЛИВОСТІ РОЗРАХУНКУ ПОТУЖНОСТІ РАДІОМЕТРИЧНИХ ОБ’ЄКТІВ ТА ОЦІНКИ КОНТРАСТІВ ПОТУЖНОСТЕЙ СИГНАЛІВ З УРАХУВАННЯМ ВПЛИВУ АТМОСФЕРИ
У статті розкрито особливості розрахунку потужності радіометричних об’єктів та оцінки контрастів потужностей сигналів з урахуванням впливу атмосфери. Запропоновано варіант оцінки гладких поверхонь (дзеркально відбивають) та шершавих (дифузно розсіюють). Отримані значення температури атмосферного випромінювання, що «екранує» об’єкт вимірювання, з урахуванням сумарних втрат по трасі поширення радіометричних сигналів та коефіцієнту поглинання. Приведено графічний матеріал.
- 21 March 2025
- Published by European Scientific Platform (Publications) in Grail of Science
- No. 50,p. 551-559
Open AccessОСОБЛИВОСТІ РОЗРАХУНКУ ПОТУЖНОСТІ РАДІОМЕТРИЧНИХ ОБ’ЄКТІВ ТА ОЦІНКИ КОНТРАСТІВ ПОТУЖНОСТЕЙ СИГНАЛІВ З УРАХУВАННЯМ ВПЛИВУ АТМОСФЕРИ
У статті розкрито особливості розрахунку потужності радіометричних об’єктів та оцінки контрастів потужностей сигналів з урахуванням впливу атмосфери. Запропоновано варіант оцінки гладких поверхонь (дзеркально відбивають) та шершавих (дифузно розсіюють). Отримані значення температури атмосферного випромінювання, що «екранує» об’єкт вимірювання, з урахуванням сумарних втрат по трасі поширення радіометричних сигналів та коефіцієнту поглинання. Приведено графічний матеріал.
- Open Access
- 30 December 2024
- Published by State Scientific Research Institute of Armament and Military Equipment Testing and Certification in Наукові праці Державного науково-дослідного інституту випробувань і сертифікації озброєння та військової техніки
- Vol. 22 (4) , 31-40
PROSPECTIVE MODEL OF INTERNATIONAL SCIENTIFIC AND SCIENTIFIC-TECHNICAL COOPERATION IN THE INTERESTS OF THE ARMED FORCES OF UKRAINE
Taking into account the experience of Ukraine’s resistance to the armed aggression of the russian federation since 2014, the support of partners is crucial. The trust of partner countries can be caused by a number of factors, one of which is effective scientific and scientific-technical cooperation in the interests of the Armed Forces of Ukraine. As a result, the security and defense sector of Ukraine must and must systematically update the organization, planning and implementation of scientific and scientific-technical cooperation in accordance with the requirements of modernity and the experience of partner countries in this direction. As a result, the security and defense sector of Ukraine must and must systematically update the organization, planning and implementation of scientific and scientific-technical cooperation in accordance with the requirements of modernity and the experience of partner countries in this direction. The work presents the results of the analysis of the purpose and tasks of the current advisory and advisory bodies of the state, in the system of the Ministry of Defense of Ukraine, the main partner states, their interrelationships and coordinating actions, the main principles of activity, the model of scientific and scientific and technical cooperation of Ukraine is summarized and formed with partner countries in the interests of the Armed Forces of Ukraine, which currently exists, proposals are given for priority measures to organize cooperation and coordination of actions with the NATO Science & Technology Organization (STO), a perspective model of scientific and scientific and technical cooperation of Ukraine with partner countries is built, priority measures for effective cooperation in the field of international scientific and scientific-technical cooperation in the interests of the Armed Forces of Ukraine have been determined, namely: identification and authorization by the Cabinet of Ministers of Ukraine of a national coordinator for the organization of interdepartmental interaction within the state and international cooperation with partner countries; formation of a network of independent experts-specialists in the military sphere in various scientific areas and fields of knowledge (with a high degree of scientific and technical affinity to the main areas of activity of the Science & Technology Board STO); the appointment of national representatives for direct cooperation on a permanent basis with the expert committees of the II level of the NATO Science &Technology Organization; creation of a separate consultative and advisory center in the Armed Forces of Ukraine for the implementation and implementation of international scientific and scientific-technical cooperation in the interests of the Armed Forces of Ukraine.
- 30 December 2024
- Published by State Scientific Research Institute of Armament and Military Equipment Testing and Certification in Наукові праці Державного науково-дослідного інституту випробувань і сертифікації озброєння та військової техніки
- Vol. 22 (4) , 31-40
Open AccessPROSPECTIVE MODEL OF INTERNATIONAL SCIENTIFIC AND SCIENTIFIC-TECHNICAL COOPERATION IN THE INTERESTS OF THE ARMED FORCES OF UKRAINE
Taking into account the experience of Ukraine’s resistance to the armed aggression of the russian federation since 2014, the support of partners is crucial. The trust of partner countries can be caused by a number of factors, one of which is effective scientific and scientific-technical cooperation in the interests of the Armed Forces of Ukraine. As a result, the security and defense sector of Ukraine must and must systematically update the organization, planning and implementation of scientific and scientific-technical cooperation in accordance with the requirements of modernity and the experience of partner countries in this direction. As a result, the security and defense sector of Ukraine must and must systematically update the organization, planning and implementation of scientific and scientific-technical cooperation in accordance with the requirements of modernity and the experience of partner countries in this direction. The work presents the results of the analysis of the purpose and tasks of the current advisory and advisory bodies of the state, in the system of the Ministry of Defense of Ukraine, the main partner states, their interrelationships and coordinating actions, the main principles of activity, the model of scientific and scientific and technical cooperation of Ukraine is summarized and formed with partner countries in the interests of the Armed Forces of Ukraine, which currently exists, proposals are given for priority measures to organize cooperation and coordination of actions with the NATO Science & Technology Organization (STO), a perspective model of scientific and scientific and technical cooperation of Ukraine with partner countries is built, priority measures for effective cooperation in the field of international scientific and scientific-technical cooperation in the interests of the Armed Forces of Ukraine have been determined, namely: identification and authorization by the Cabinet of Ministers of Ukraine of a national coordinator for the organization of interdepartmental interaction within the state and international cooperation with partner countries; formation of a network of independent experts-specialists in the military sphere in various scientific areas and fields of knowledge (with a high degree of scientific and technical affinity to the main areas of activity of the Science & Technology Board STO); the appointment of national representatives for direct cooperation on a permanent basis with the expert committees of the II level of the NATO Science &Technology Organization; creation of a separate consultative and advisory center in the Armed Forces of Ukraine for the implementation and implementation of international scientific and scientific-technical cooperation in the interests of the Armed Forces of Ukraine.
- Open Access
- 7 November 2024
- Published by State Scientific Research Institute of Armament and Military Equipment Testing and Certification in Випробування та сертифікація
- No. 2(4),p. 29-40
FUNCTIONAL MODEL OF THE SYSTEM FOR ASSESSMENT OF CONFORMITY (CERTIFICATION) OF DEFENSE GOODS
Taking into account the experience of Ukraine's resistance to the armed aggression of the Russian Federation since 2014, the support of partners is crucial. The trust of partner countries can be caused by a number of factors, one of which is the functioning of the system of state quality assurance in the security and defense sector and its main components. As a result, the security and defense sector of Ukraine must and must systematically update the functioning of manufacturers/suppliers in accordance with world standards. The paper analyzes the regulatory and legal framework, which is the basis of the system of state quality assurance in the security and defense sector. A functional model was developed using the IDEF0 design methodology to determine the phasing of the creation of an effective system of state quality assurance and influencing factors. The creation of a unified conformity assessment (certification) system in the security and defense sector of Ukraine is, firstly, a necessary condition for creating the image of the state in the market of defense services, and secondly, it will become a reliable tool for ensuring the quality of products, which will allow establishing a high level of consumer trust due primarily to control quality management systems at enterprises producing defense products (the most effective way to ensure quality). The article identifies problematic issues of defense procurement, quality assurance, certification and ways to eliminate them. In order to form/develop and put into practice procedures for evaluating the conformity (certification) of key parameters, it is necessary to develop and implement new test methods, develop and use the latest laboratory base in priority directions for assessing the safety of operation and use.
- 7 November 2024
- Published by State Scientific Research Institute of Armament and Military Equipment Testing and Certification in Випробування та сертифікація
- No. 2(4),p. 29-40
Open AccessFUNCTIONAL MODEL OF THE SYSTEM FOR ASSESSMENT OF CONFORMITY (CERTIFICATION) OF DEFENSE GOODS
Taking into account the experience of Ukraine's resistance to the armed aggression of the Russian Federation since 2014, the support of partners is crucial. The trust of partner countries can be caused by a number of factors, one of which is the functioning of the system of state quality assurance in the security and defense sector and its main components. As a result, the security and defense sector of Ukraine must and must systematically update the functioning of manufacturers/suppliers in accordance with world standards. The paper analyzes the regulatory and legal framework, which is the basis of the system of state quality assurance in the security and defense sector. A functional model was developed using the IDEF0 design methodology to determine the phasing of the creation of an effective system of state quality assurance and influencing factors. The creation of a unified conformity assessment (certification) system in the security and defense sector of Ukraine is, firstly, a necessary condition for creating the image of the state in the market of defense services, and secondly, it will become a reliable tool for ensuring the quality of products, which will allow establishing a high level of consumer trust due primarily to control quality management systems at enterprises producing defense products (the most effective way to ensure quality). The article identifies problematic issues of defense procurement, quality assurance, certification and ways to eliminate them. In order to form/develop and put into practice procedures for evaluating the conformity (certification) of key parameters, it is necessary to develop and implement new test methods, develop and use the latest laboratory base in priority directions for assessing the safety of operation and use.
- Open Access
- 7 November 2024
- Published by State Scientific Research Institute of Armament and Military Equipment Testing and Certification in Випробування та сертифікація
- No. 2(4),p. 14-21
METHOD FOR PRELIMINARY ASSESSMENT OF THE TECHNO-ECONOMIC LEVEL OF MECHANICAL SYSTEMS FOR HUMANITARIAN DEMINING
Currently, Ukraine is suffering from the pressure of an aggressor who is doing everything in its power to wipe our country off the face of the earth. However, the Armed Forces of Ukraine and other Defense Forces are putting up a worthy resistance. The war continues. Nevertheless, life does not stand still. Problems arise that need to be addressed now, without waiting for the end of the conflict. One such problem is the presence of mined territories. A methodology for assessing the techno-economic level of mechanical systems for humanitarian demining has been proposed, utilizing only a priori data without conducting field tests, the methodology of which is implemented in CWA 15044. The initial data for the methodology include all available technical, operational, and other characteristics provided by the manufacturer of the mechanical demining system, existing data on the experience of its use in demining tasks, and information on previous or other types of tests of the sample. The initial data for the methodology include all available technical, operational, and other characteristics provided by the manufacturer of the mechanical demining system, as well as existing data on its usage experience (if available) in demining tasks, the availability of working design documentation, standard operating procedures, information on previous or other types of tests of the sample (if any), and other relevant data. The limitation of the methodology is that it only uses the data provided (claimed by the manufacturer), and no experimental field tests are conducted (such tests may be carried out later if a positive assessment of the initial evaluation of the sample is received). The methodology is based on the theory of expert evaluation. In the first stage, an expert commission is formed to conduct the expert assessment of the techno-economic level of the mechanical demining system sample. In the second stage, the initial data are compiled. Experts analyze the informational materials provided by the developer regarding the prospective project, as well as any other necessary documented information. In the third stage, the techno-economic level of the proposed sample is assessed in relation to existing known samples (R1), and the best mechanical demining systems with similar purposes are selected for comparison. The advantage of this methodology compared to more complex evaluation algorithms is that, as a result of the sequential execution of all stages, a single number (scalar) can be obtained for each competing sample, reflecting its techno-economic level. This allows for easy comparison, unlike cases where vector methods of comparison are used.
- 7 November 2024
- Published by State Scientific Research Institute of Armament and Military Equipment Testing and Certification in Випробування та сертифікація
- No. 2(4),p. 14-21
Open AccessMETHOD FOR PRELIMINARY ASSESSMENT OF THE TECHNO-ECONOMIC LEVEL OF MECHANICAL SYSTEMS FOR HUMANITARIAN DEMINING
Currently, Ukraine is suffering from the pressure of an aggressor who is doing everything in its power to wipe our country off the face of the earth. However, the Armed Forces of Ukraine and other Defense Forces are putting up a worthy resistance. The war continues. Nevertheless, life does not stand still. Problems arise that need to be addressed now, without waiting for the end of the conflict. One such problem is the presence of mined territories. A methodology for assessing the techno-economic level of mechanical systems for humanitarian demining has been proposed, utilizing only a priori data without conducting field tests, the methodology of which is implemented in CWA 15044. The initial data for the methodology include all available technical, operational, and other characteristics provided by the manufacturer of the mechanical demining system, existing data on the experience of its use in demining tasks, and information on previous or other types of tests of the sample. The initial data for the methodology include all available technical, operational, and other characteristics provided by the manufacturer of the mechanical demining system, as well as existing data on its usage experience (if available) in demining tasks, the availability of working design documentation, standard operating procedures, information on previous or other types of tests of the sample (if any), and other relevant data. The limitation of the methodology is that it only uses the data provided (claimed by the manufacturer), and no experimental field tests are conducted (such tests may be carried out later if a positive assessment of the initial evaluation of the sample is received). The methodology is based on the theory of expert evaluation. In the first stage, an expert commission is formed to conduct the expert assessment of the techno-economic level of the mechanical demining system sample. In the second stage, the initial data are compiled. Experts analyze the informational materials provided by the developer regarding the prospective project, as well as any other necessary documented information. In the third stage, the techno-economic level of the proposed sample is assessed in relation to existing known samples (R1), and the best mechanical demining systems with similar purposes are selected for comparison. The advantage of this methodology compared to more complex evaluation algorithms is that, as a result of the sequential execution of all stages, a single number (scalar) can be obtained for each competing sample, reflecting its techno-economic level. This allows for easy comparison, unlike cases where vector methods of comparison are used.
- Open Access
- 1 April 2024
- Published by State Scientific Research Institute of Armament and Military Equipment Testing and Certification in Наукові праці Державного науково-дослідного інституту випробувань і сертифікації озброєння та військової техніки
- Vol. 19 (1) , 14-24
ANALYSIS OF THE PROCEDURE FOR ORDERING RESEARCH AND DEVELOPMENT PROCUREMENT (R&D) IN THE INTERESTS OF THE ARMED FORCES OF UKRAINE ON THE TERRITORY OF UKRAINE AND ABROAD
Research and development (R&D) orders have a significant impact on the production and modernization of weapons and military equipment in Ukraine, and given the nature of current threats and strategic challenges, continued investment in research and development is key to maintaining effective defense and national security. R&D is an integral part of the unified innovation process "from idea to implementation", during which the results of R&D or acquired knowledge and experience are implemented in technical documentation to create prototypes of products that precede their mass production. However, the analysis of the regulatory framework of the current legislation on the organization of ordering R&D in the interests of the Armed Forces of Ukraine shows that currently there is no effective algorithm for ordering R&D abroad in the interests of the Armed Forces of Ukraine, and cases of ordering R&D are an exception and, as a rule, do not have a clear justification and implementation mechanism. Therefore, the issue requires cooperation at different levels and with different structures within the Ministry of Defense of Ukraine and the Armed Forces of Ukraine. In order to establish cooperation with foreign partners in the field of scientific and technical cooperation, there is an urgent need to harmonize national regulations on military products with international and NATO standards. In addition, coordination should be carried out systematically with the involvement of all stakeholders to ensure the successful ordering of R&D and the fulfillment of tasks, taking into account the requirements of other countries or partners, which is a key aspect of effective coordination at the international level. Therefore, there is a need to develop legal and regulatory documents that would regulate the ordering procedure and interaction of participants in the process of ordering and performing R&D in the interests of the Armed Forces of Ukraine abroad, to improve legislation and other regulations to a single conceptual, structural, functional and substantive understanding of the essence of the procedure for ordering R&D abroad. The article analyzes the legal framework of the process of ordering R&D in the interests of the Armed Forces of Ukraine, analyzes the scheme of ordering R&D in Ukraine, and provides proposals for organizing the ordering of R&D in the interests of the Armed Forces of Ukraine abroad.
- 1 April 2024
- Published by State Scientific Research Institute of Armament and Military Equipment Testing and Certification in Наукові праці Державного науково-дослідного інституту випробувань і сертифікації озброєння та військової техніки
- Vol. 19 (1) , 14-24
Open AccessANALYSIS OF THE PROCEDURE FOR ORDERING RESEARCH AND DEVELOPMENT PROCUREMENT (R&D) IN THE INTERESTS OF THE ARMED FORCES OF UKRAINE ON THE TERRITORY OF UKRAINE AND ABROAD
Research and development (R&D) orders have a significant impact on the production and modernization of weapons and military equipment in Ukraine, and given the nature of current threats and strategic challenges, continued investment in research and development is key to maintaining effective defense and national security. R&D is an integral part of the unified innovation process "from idea to implementation", during which the results of R&D or acquired knowledge and experience are implemented in technical documentation to create prototypes of products that precede their mass production. However, the analysis of the regulatory framework of the current legislation on the organization of ordering R&D in the interests of the Armed Forces of Ukraine shows that currently there is no effective algorithm for ordering R&D abroad in the interests of the Armed Forces of Ukraine, and cases of ordering R&D are an exception and, as a rule, do not have a clear justification and implementation mechanism. Therefore, the issue requires cooperation at different levels and with different structures within the Ministry of Defense of Ukraine and the Armed Forces of Ukraine. In order to establish cooperation with foreign partners in the field of scientific and technical cooperation, there is an urgent need to harmonize national regulations on military products with international and NATO standards. In addition, coordination should be carried out systematically with the involvement of all stakeholders to ensure the successful ordering of R&D and the fulfillment of tasks, taking into account the requirements of other countries or partners, which is a key aspect of effective coordination at the international level. Therefore, there is a need to develop legal and regulatory documents that would regulate the ordering procedure and interaction of participants in the process of ordering and performing R&D in the interests of the Armed Forces of Ukraine abroad, to improve legislation and other regulations to a single conceptual, structural, functional and substantive understanding of the essence of the procedure for ordering R&D abroad. The article analyzes the legal framework of the process of ordering R&D in the interests of the Armed Forces of Ukraine, analyzes the scheme of ordering R&D in Ukraine, and provides proposals for organizing the ordering of R&D in the interests of the Armed Forces of Ukraine abroad.
- Open Access
- 28 February 2024
- Published by Private Company Technology Center in Eastern-European Journal of Enterprise Technologies
- Vol. 1 (9 (127)) , 34-51
Development of the sociocyberphysical systems` multi-contour security methodology
The constant increase in the number of threats to the security of critical infrastructure objects, which include socio-cyberphysical systems, leads to a decrease in the quality of security services and the level of security of infrastructure elements. The object of research is the process of building a complex system of protection in socio-cyberphysical systems. The imperfection of the mechanisms for ensuring the security of critical infrastructure objects, which include socio-cyberphysical systems, the technological complexity of identifying new security threats necessitates an urgent need for a radical revision of the current approaches to its provision. So, it becomes clear that the development of a new approach to ensuring the security of information resources in socio-cyberphysical systems is needed. The article proposes a new approach to the methodological foundations of building multi-contour information protection systems with internal and external circuits on each of the platforms of socio-cyberphysical systems. This approach is based on a universal classifier of threats, which takes into account not the technical aspect of threats, but also their integration with social engineering methods, their synergy of hybridity. The sociopolitical influence on the realization of threats is taken into account, and practical mechanisms for providing basic security services based on post-quantum algorithms are also proposed. To provide basic security services in the proposed multi-contour protection system, it is proposed to use post-quantum algorithms – McEliece crypto-code constructions, which provide Perr=10-9–10-12, safe time Tsec=1025–1035 group operations. Within the framework of the proposed approach, the problem of increasing the level of information security has been formalized and further ways of solving it have been determined Постійно кількість загроз безпеці об'єктів критичної інфраструктури, до яких належать і соціокіберфізичні системи призводить до зниження якості послуг безпеки та рівня захищеності елементів інфраструктури. Об'єктом дослідження є процес побудови комплексної системи захисту в соціокіберфізичних системах. Недосконалість механізмів забезпечення безпеки об'єктів критичної інфраструктури, до яких належать і соціокіберфізичні системи, технологічна складність виявлення нових загроз безпеці зумовлює нагальну необхідність кардинального перегляду чинних підходів до її забезпечення. Отже, ставати зрозуміло, що розробка нового підходу до забезпечення безпеки інформаційних ресурсів у соціокіберфізичних системах. У статті запропоновано новий підхід методологічних засад побудови багатоконтурних систем захисту інформації із внутрішнім та зовнішнім контурами на кожній із платформ соціокіберфізичних систем. Такий підхід формується на універсальному класифікаторі загроз, який враховує не технічний аспект загроз, а і їх комплексування з методами соціальної інженерії, їхньої синергії гібридності. Враховується соціополітичний вплив на реалізацію загроз, а також запропоновано практичні механізми забезпечення основних послуг безпеки на основі постквантових алгоритмів. Для забезпечення основних послуг безпеки у запропонованої багатоконтурної системи захисту пропонується використовувати постквантові алгоритми – крипто-кодові конструкції Мак-Еліса, які забезпечують Рпом=10-9–10-12,безпечній час Тбезп =1025–1035 групових операцій. У рамках запропонованого підходу у загальному вигляді формалізовано проблему підвищення рівня захищеності інформації та визначено подальші шляхи її вирішення
- 28 February 2024
- Published by Private Company Technology Center in Eastern-European Journal of Enterprise Technologies
- Vol. 1 (9 (127)) , 34-51
Open AccessDevelopment of the sociocyberphysical systems` multi-contour security methodology
The constant increase in the number of threats to the security of critical infrastructure objects, which include socio-cyberphysical systems, leads to a decrease in the quality of security services and the level of security of infrastructure elements. The object of research is the process of building a complex system of protection in socio-cyberphysical systems. The imperfection of the mechanisms for ensuring the security of critical infrastructure objects, which include socio-cyberphysical systems, the technological complexity of identifying new security threats necessitates an urgent need for a radical revision of the current approaches to its provision. So, it becomes clear that the development of a new approach to ensuring the security of information resources in socio-cyberphysical systems is needed. The article proposes a new approach to the methodological foundations of building multi-contour information protection systems with internal and external circuits on each of the platforms of socio-cyberphysical systems. This approach is based on a universal classifier of threats, which takes into account not the technical aspect of threats, but also their integration with social engineering methods, their synergy of hybridity. The sociopolitical influence on the realization of threats is taken into account, and practical mechanisms for providing basic security services based on post-quantum algorithms are also proposed. To provide basic security services in the proposed multi-contour protection system, it is proposed to use post-quantum algorithms – McEliece crypto-code constructions, which provide Perr=10-9–10-12, safe time Tsec=1025–1035 group operations. Within the framework of the proposed approach, the problem of increasing the level of information security has been formalized and further ways of solving it have been determined Постійно кількість загроз безпеці об'єктів критичної інфраструктури, до яких належать і соціокіберфізичні системи призводить до зниження якості послуг безпеки та рівня захищеності елементів інфраструктури. Об'єктом дослідження є процес побудови комплексної системи захисту в соціокіберфізичних системах. Недосконалість механізмів забезпечення безпеки об'єктів критичної інфраструктури, до яких належать і соціокіберфізичні системи, технологічна складність виявлення нових загроз безпеці зумовлює нагальну необхідність кардинального перегляду чинних підходів до її забезпечення. Отже, ставати зрозуміло, що розробка нового підходу до забезпечення безпеки інформаційних ресурсів у соціокіберфізичних системах. У статті запропоновано новий підхід методологічних засад побудови багатоконтурних систем захисту інформації із внутрішнім та зовнішнім контурами на кожній із платформ соціокіберфізичних систем. Такий підхід формується на універсальному класифікаторі загроз, який враховує не технічний аспект загроз, а і їх комплексування з методами соціальної інженерії, їхньої синергії гібридності. Враховується соціополітичний вплив на реалізацію загроз, а також запропоновано практичні механізми забезпечення основних послуг безпеки на основі постквантових алгоритмів. Для забезпечення основних послуг безпеки у запропонованої багатоконтурної системи захисту пропонується використовувати постквантові алгоритми – крипто-кодові конструкції Мак-Еліса, які забезпечують Рпом=10-9–10-12,безпечній час Тбезп =1025–1035 групових операцій. У рамках запропонованого підходу у загальному вигляді формалізовано проблему підвищення рівня захищеності інформації та визначено подальші шляхи її вирішення
- Open Access
- 27 December 2023
- Published by State Scientific Research Institute of Armament and Military Equipment Testing and Certification in Випробування та сертифікація
- No. 2(2),p. 12-18
CERTIFICATION OF ELEMENTS OF PROTECTIVE STRUCTURES: PROBLEM ISSUES AND THE WAYS OF THEIR SOLUTIONS
With the beginning of armed aggression on the russia, the pace of production of protective structures, which are a necessity for the protection of the civilian population and for use in the defense sector, is increasing. Together with the requirement to increase the pace of production of protective structures, there is a question of standardizing requirements for construction products used in production and assessing the conformity of finished products. In order to determine the problematic issues of certification of elements of protective structures, an analysis of regulatory and legal documentation in the specified field was carried out in the work. Currently, there are no requirements for the Technical Regulations of construction products for their manufacture. At the same time, manufacturers are forced to carry out parallel procedures for assessing the conformity of products in accordance with the requirements of the Technical Regulations and other requirements to confirm the ability of products to be used in the construction of protective structures. The paper proposes steps to optimize the assessment of the compliance of elements of protective structures, which will lead to a reduction in the terms of certification work, and therefore costs.
- 27 December 2023
- Published by State Scientific Research Institute of Armament and Military Equipment Testing and Certification in Випробування та сертифікація
- No. 2(2),p. 12-18
Open AccessCERTIFICATION OF ELEMENTS OF PROTECTIVE STRUCTURES: PROBLEM ISSUES AND THE WAYS OF THEIR SOLUTIONS
With the beginning of armed aggression on the russia, the pace of production of protective structures, which are a necessity for the protection of the civilian population and for use in the defense sector, is increasing. Together with the requirement to increase the pace of production of protective structures, there is a question of standardizing requirements for construction products used in production and assessing the conformity of finished products. In order to determine the problematic issues of certification of elements of protective structures, an analysis of regulatory and legal documentation in the specified field was carried out in the work. Currently, there are no requirements for the Technical Regulations of construction products for their manufacture. At the same time, manufacturers are forced to carry out parallel procedures for assessing the conformity of products in accordance with the requirements of the Technical Regulations and other requirements to confirm the ability of products to be used in the construction of protective structures. The paper proposes steps to optimize the assessment of the compliance of elements of protective structures, which will lead to a reduction in the terms of certification work, and therefore costs.
- Open Access
- 29 June 2023
- Published by Private Company Technology Center
MODELS OF SOCIO-CYBER-PHYSICAL SYSTEMS SECURITY
The development of technologies and computing resources has not only expanded the range of digital services in all spheres of human activity, but also determined the range of targeted cyber attacks. Targeted attacks are aimed at destroying not only the business structure, but also its individual components that determine critical business processes. The continuity of such business processes is a critical component of any company, organization or enterprise of any form of ownership, which has a critical impact on making a profit or organizing production processes. The proposed concept of determining the security level of critical business processes is based on the need to use multiloop information security systems. This makes it possible to ensure the continuity of critical business processes through a timely objective assessment of the level of security and the timely formation of preventive measures. This approach is based on the proposed rules for determining the reach of a given security level, based on assessments of the integrity, availability and confidentiality of information arrays, as well as computer equipment for different points of the organization's business processes. The issues of applying situational management methods to ensure the safe functioning of objects of socio-cyberphysical systems, logical and transformational rules that form the foundation for building a situational type cybersecurity management system are considered. One of the main tasks of systems of this type is described – the task of replenishing the description of the situation. The use of pseudophysical logics, various types of pseudophysical logics, the method of their construction and their interconnection are proposed. Particular attention is paid to causal pseudophysical logic, as the least developed for the purposes of ensuring cybersecurity. The formation of smart technologies, as a rule, uses the wireless standards of communication channels IEEE 802.11X, IEEE 802.15.4, IEEE 802.16, which use only authentication protocols and privacy mechanisms that are formed on the basis of symmetric algorithms. In the conditions of the post-quantum period (the appearance of a full-scale quantum computer), the stability of such algorithms is questioned. Such systems, as a rule, are formed on the basis of the synthesis of socio-cyber-physical systems and cloud technologies, which simplifies the implementation of Advanced Persistent Threat attacks, both on the internal loop of control systems and on the external one. The proposed creation of multi-circuit information protection systems allows for an objective assessment of the flow state of the system as a whole and the formation of preventive measures against cyber threats. In the thied chapter, models of probable threats and information protection in public networks are proposed. The most general model of the formal description of the protection system is the model of the security system with full overlap, in which a complete list of protection objects and threats to information is determined, and means of ensuring security are determined from the point of view of their effectiveness and contribution to ensuring the security of the entire telecommunications system. It is also shown that the combination of four models (M1, M2, M3, M4) in various variants provides wide opportunities for modeling various known types of threats and their implementation. However, in connection with the continuity of the process of developing new and improving existing methods and means of implementing threats, it is necessary to use such approaches to ensuring information protection that allow detecting and preventing threats of unknown types and carrying out dynamic correction of protection behavior, adapting it to specific application conditions. The M5 basic model is described, which enables continuous refinement of threat classes and response measures, and continuous training of the adaptive component of the CSI, which, in turn, detects and prevents threats of unknown types. The M6 basic model is introduced with the aim of obtaining higher security due to the presence of a special module of internal diagnostics that diagnoses the entire protection system, decides on the correction of the SHI behavior algorithm, and makes it possible to achieve SHI fault tolerance; a special module that diagnoses the communication channel with subsequent changes in the level of protection, allows to achieve the adaptability of the SHI. The fourth chapter is deal with the development of cryptographic primitives based on cellular automata. The definition of a cellular automaton is given and the elementary rules of intercellular interaction are described. A number of generators of pseudorandom binary sequences have been developed based on a combination of elementary rules of intercellular interaction, as well as cell interaction according to a rule of our own development. In the “cryptographic sponge” architecture, a cryptographic hashing function with a shuffling function based on cellular automata was developed and its statistical characteristics and avalanche effect were investigated. A block cipher in the SP-network architecture is constructed, in which cellular automata are used to deploy the key, and the encryption process is based on elementary procedures of replacement and permutation. Substitution blocks are used from the well-known AES cipher, a description of a stream cipher is given, where a personal computer keyboard and mouse are used as the initial entropy. Random data received from the specified devices is processed by a proprietary hashing function based on a "cryptographic sponge". All developed cryptographic functions and primitives demonstrated good statistical characteristics and avalanche properties. The fifth chapter proposes a methodology for analyzing the quality of the mechanism for validating the identified vulnerabilities of a corporate network,...
- 29 June 2023
- Published by Private Company Technology Center
Open AccessMODELS OF SOCIO-CYBER-PHYSICAL SYSTEMS SECURITY
The development of technologies and computing resources has not only expanded the range of digital services in all spheres of human activity, but also determined the range of targeted cyber attacks. Targeted attacks are aimed at destroying not only the business structure, but also its individual components that determine critical business processes. The continuity of such business processes is a critical component of any company, organization or enterprise of any form of ownership, which has a critical impact on making a profit or organizing production processes. The proposed concept of determining the security level of critical business processes is based on the need to use multiloop information security systems. This makes it possible to ensure the continuity of critical business processes through a timely objective assessment of the level of security and the timely formation of preventive measures. This approach is based on the proposed rules for determining the reach of a given security level, based on assessments of the integrity, availability and confidentiality of information arrays, as well as computer equipment for different points of the organization's business processes. The issues of applying situational management methods to ensure the safe functioning of objects of socio-cyberphysical systems, logical and transformational rules that form the foundation for building a situational type cybersecurity management system are considered. One of the main tasks of systems of this type is described – the task of replenishing the description of the situation. The use of pseudophysical logics, various types of pseudophysical logics, the method of their construction and their interconnection are proposed. Particular attention is paid to causal pseudophysical logic, as the least developed for the purposes of ensuring cybersecurity. The formation of smart technologies, as a rule, uses the wireless standards of communication channels IEEE 802.11X, IEEE 802.15.4, IEEE 802.16, which use only authentication protocols and privacy mechanisms that are formed on the basis of symmetric algorithms. In the conditions of the post-quantum period (the appearance of a full-scale quantum computer), the stability of such algorithms is questioned. Such systems, as a rule, are formed on the basis of the synthesis of socio-cyber-physical systems and cloud technologies, which simplifies the implementation of Advanced Persistent Threat attacks, both on the internal loop of control systems and on the external one. The proposed creation of multi-circuit information protection systems allows for an objective assessment of the flow state of the system as a whole and the formation of preventive measures against cyber threats. In the thied chapter, models of probable threats and information protection in public networks are proposed. The most general model of the formal description of the protection system is the model of the security system with full overlap, in which a complete list of protection objects and threats to information is determined, and means of ensuring security are determined from the point of view of their effectiveness and contribution to ensuring the security of the entire telecommunications system. It is also shown that the combination of four models (M1, M2, M3, M4) in various variants provides wide opportunities for modeling various known types of threats and their implementation. However, in connection with the continuity of the process of developing new and improving existing methods and means of implementing threats, it is necessary to use such approaches to ensuring information protection that allow detecting and preventing threats of unknown types and carrying out dynamic correction of protection behavior, adapting it to specific application conditions. The M5 basic model is described, which enables continuous refinement of threat classes and response measures, and continuous training of the adaptive component of the CSI, which, in turn, detects and prevents threats of unknown types. The M6 basic model is introduced with the aim of obtaining higher security due to the presence of a special module of internal diagnostics that diagnoses the entire protection system, decides on the correction of the SHI behavior algorithm, and makes it possible to achieve SHI fault tolerance; a special module that diagnoses the communication channel with subsequent changes in the level of protection, allows to achieve the adaptability of the SHI. The fourth chapter is deal with the development of cryptographic primitives based on cellular automata. The definition of a cellular automaton is given and the elementary rules of intercellular interaction are described. A number of generators of pseudorandom binary sequences have been developed based on a combination of elementary rules of intercellular interaction, as well as cell interaction according to a rule of our own development. In the “cryptographic sponge” architecture, a cryptographic hashing function with a shuffling function based on cellular automata was developed and its statistical characteristics and avalanche effect were investigated. A block cipher in the SP-network architecture is constructed, in which cellular automata are used to deploy the key, and the encryption process is based on elementary procedures of replacement and permutation. Substitution blocks are used from the well-known AES cipher, a description of a stream cipher is given, where a personal computer keyboard and mouse are used as the initial entropy. Random data received from the specified devices is processed by a proprietary hashing function based on a "cryptographic sponge". All developed cryptographic functions and primitives demonstrated good statistical characteristics and avalanche properties. The fifth chapter proposes a methodology for analyzing the quality of the mechanism for validating the identified vulnerabilities of a corporate network,...