DPDony Perdana

Dony Perdana

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Dony Perdana has a total of 41 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Generalized Regression Neural Network-Based Analysis of the Effectiveness of Cryogenic Machining on SS316

    by Muhamad Nur Rohman, Dony Perdana, Wiji Lestariningsih, Luki Trihardani

    This study develops a generalized regression neural network (GRNN) model to analyze the effectiveness of cryogenic machining compared to dry and wet machining. The model was trained using datasets derived from face milling experiments on SS316 stainless steel, involving variations in spindle speed, feed rate, and depth of cut, with surface roughness (Ra) as the measured output. Cryogenic machining consistently produced lower Ra values, as confirmed by Interval Plot analysis. The GRNN model accurately predicted Ra, achieving low Mean Absolute Percentage Error values (2.31% for training and 2.05% for testing), along with high coefficients of determination (R² = 0.9957 for training and 0.9956 for testing). The GRNN model was then utilized for sensitivity analysis and response surface analysis. Perturbation-based sensitivity analysis identified the machining technique as the most influential parameter. Response surface analysis further confirmed the superiority of cryogenic machining across all parameter settings.

  • Open Access

    Integration of renewable energy for sustainable electric vehicle charging in Sidoarjo, Indonesia: a techno-economic perspective

    by Mochamad Choifin, Yuki Trisnoaji, Zainal Arifin, Mochamad Subchan Mauludin, Marsya Aulia Rizkita, Singgih Dwi Prasetyo, Dony Perdana

    This study explores the techno-economic feasibility of integrating solar photovoltaic (PV) systems for electric vehicle (EV) charging infrastructure in Sidoarjo, Indonesia. Through simulation using HOMER Pro software, both standalone PV and PV-grid hybrid configurations were evaluated under real-world EV load profiles. The analysis reveals that the PV-grid hybrid system demonstrates superior economic performance, achieving an annual energy production of 39,214 kWh, a levelized cost of energy (LCOE) of $0.3975/kWh, and a return on investment (ROI) of 62.01% over 20 years, despite a payback period exceeding 30 years. Sensitivity analysis confirms that the system remains moderately resilient under a 10% reduction in solar irradiance or a 20% increase in EV demand. The study also compares the standalone PV configuration, which, while suitable for off-grid applications, results in significant energy underutilization. Moreover, the PV-grid model supports surplus electricity sales, enhancing financial viability. These findings provide actionable insights for stakeholders, energy planners, and policymakers aiming to scale EV charging infrastructure sustainably in Indonesia’s urban environments.

  • Open Access

    The role of bio-additive and attractive magnetic fields on flame behavior and hydrocarbon gas in palm oil droplets combustion

    by Dony Perdana, Mochammad Khoirul Rosidin, Wahyu Dwi Purnama

    The availability of fossil fuels is increasingly diminishing, while the global energy demand continues to rise. Alternative energy sources currently available from various vegetable oils include jatropha, palm, kapok seed, coconut, and cottonseed oil as substitutes for fossil fuels. When used directly in diesel engines, these oils can lead to several issues, including high viscosity and elevated flash points, which hinder proper fuel combustion and result in carbon deposits within the combustion chamber. Several solutions have been proposed to address these issues, including blending vegetable oils with diesel fuel at various ratios, preheating the vegetable oils, mixing them with additives, and utilizing exhaust gas recirculation and combustion chamber modification. This study investigates the role of bio-additive and applied magnetic fields in influencing flame characteristics and hydrocarbon gas emissions during palm oil droplet combustion. The experimental procedure involved direct testing on palm oil by incorporating a 3% eucalyptus oil-based bio additive and applying an attractive magnetic field (U-S), with droplet diameters ranging between 0.3-0.4 mm. Thermocouples diameter of 0.12 mm were placed on both sides of the magnet with a magnetic field intensity of 1.1 Tesla, and heating wires as the heat source were positioned beneath the thermocouples. The study found that combining eucalyptus oil bio-additive and an attractive magnetic field (U-S) resulted in the shortest flame evolution time of 1760 ms. The flame height and hydrocarbon gas concentration also reached their lowest values at 5.74 mm and 296 ppm, respectively. Meanwhile, the same treatment produced of highest temperature of 846.5 °C compared to other experimental conditions.

  • Open Access

    Effect on saturated and unsaturated fatty acids on various vegetable oils on droplet combustion characteristic

    by Dony Perdana, Muhamad Nur Rohman, Mochamad Choifin

    Vegetable oils have composed of triglycerides, which one consist of 3 fatty acids combined with glycerol. Each saturated and unsaturated fatty acid has a different effect on burning characteristics. This study aimed to investigated effect of fatty acids at ceiba pentandra and jatropha oils on the flame behavior of the droplet combustion process. The combustion characteristic was observed by an ignited droplet at the junction using a thermocouple and a high-speed camera (120 fps). Results showed that a higher saturated fatty acid content resulted in long-life and steady flames. This is because more oleic and linoleic acid carbon atoms leave the droplet area and react with air. Jatropha oil produces a higher temperature of 780 °C than ceiba pentandra oil. Temperature of a vegetable oils flame is influenced by number of carbon chains, double bond, and heating value. Ceiba pentandra oil has a higher burning rate of 0.185 mm/s than jatropha oil at 0.155 mm/s. The chain content of polyunsaturated fatty acids has significant effect on rate of combustion, which is due to the weak van der Waals dispersion forces, such that heat absorption is more active and energetic. The highest flame height for ceiba pentandra oil is 55.03 mm compared to for jatropha oil it is 46.82 mm. Long-chain unsaturated double bonds and glycerol cause micro-explosions. This micro-explosion caused the shape of the flame to split and expand so that evaporation occurred faster, thus increasing the size of the flame.

  • Open Access

    OPTIMALISASI KUALITAS PRODUK DENGAN PENDEKATAN METODE DMAI DALAM PENERAPAN SIX SIGMA PADA PT. RM

    by Dony Perdana, Ika Widya Ardhyani, Wiji Lestariningsih, Sherly Ardhya Garini

    ABSTRAK Kebutuhan mendesak terkait optimalisasi kualitas produk dan daya saing suatu perusahaan di tengah persaingan pasar yang ketat menjadi alasan utama dilakukan penelitian ini. Tingginya tingkat cacat dan kerusakan produk berdampak pada peningkatan biaya produksi, rusaknya reputasi perusahaan serta turunnya kepuasan pelanggan. Untuk mengatasi masalah ini, penelitian menerapkan metode Six Sigma dengan pendekatan DMAI (Define, Measure, Analyze, Improve) pada PT. RM, sebuah perusahaan patungan Jepang-Indonesia di industri furnitur. Hasil dari tahap define mengidentifikasi cacat utama, yaitu pecah V-Cut 49% dengan persentase 49% dari total cacat. Tahap measure menunjukkan tingkat cacat produk melebihi target optimal, dengan DPMO sebesar 47.667 dan nilai sigma rata-rata 3,2. Melalui tahap analyze, ditemukan faktor utama penyebab cacat, yakni ketidaksesuaian proses pemotongan, kebersihan material, dan kurangnya kontrol kualitas. Solusi pada tahap improve mencakup perbaikan prosedur kerja, pelatihan karyawan, dan pemeliharaan rutin mesin. Hasil penelitian diharapkan mampu mengurangi frekuensi cacat produk, meningkatkan efisiensi operasional, dan memperkuat daya saing PT. RM di pasar domestik maupun internasional, serta mendukung keuntungan jangka panjang bagi perusahaan ABSTRACT The urgent need to optimize product quality and a company’s competitiveness amid intense market competition is the primary motivation for this research. High defect and damage rates increase production costs, damage the company’s reputation, and reduce customer satisfaction. To address this issues, this study applies the Six Sigma methodology using the DMAI (Define, Measure, Analyze, Improve) approach at PT RM, a Japanese-Indonesian joint venture in the furniture industry. In the define stage, the main defect identified was V-Cut breakage, accounting for 49% of total defects. The measure stage revealed that the product defect rate exceeded the optimal target, with a DPMO of 47,667 and an average sigma value of 3.2 The analyze stage identified inconsistencies in the cutting process, material cleanliness issues, and inadequate quality control as the primary causes of defects. To address these problems, the improve stage proposed solutions such as refining work procedures, conducting employee training, and implementing routine machine maintenance. The study’s findings are expected to reduce product defect frequency, enhance operational efficiency, and strengthen PT RM's competitiveness in domestic and international markets, ultimately supporting the company’s long-term profitability.

  • Open Access

    Pengaruh Variasi Campuran 2,5-Dimethylfuran–Minyak Kelapa pada Pembakaran Dropled terhadap Perilaku Nyala Api

    by Dony Perdana, Moh Badrus Afandi

    Tujuan dari penelitian ini untuk mengetahui pengaruh variasi campuran 2,5-dimethylfuran- minyak kelapa pembakaran droplet terhadap evolusi nyala api, tinggi nyala api dan emisi hydrocarbon. Minyak nabati dan turunannya serta penambahan bioaditif 2,5-dimethylfuran sangat dibutuhkan untuk dilakukan penelitian sebagai pengganti bahan bakar fosil. Bahan bakar menggunakan variasi campuran 2,5-dimethylfuran-minyak kelapa. Dilakukan penelitian secara eksperimental dengan menempatkan sebuah tetesan campuran 2,5-dimethylfuran- minyak kelapa pada thermocouple type K dengan diameter tetesan 0.3 mm. Hasil penelitian menemukan campuran 2,5-dimethylfuran 15%-minyak kelapa bahwa bahan bakar mudah menguap disebabkan nilai viskositas 2,5-dimethylfuran lebih rendah daripada minyak kelapa. Sehingga molekul bahan bakar bergerak sangat leluasa menghasilkan proses nukleasi pada droplet menjadi lebih singkat. Adanya senyawa 2,5-dimethylfuran yang menghasilkan ikatan baru itu berpotensi meningkatkan panjang karbon rantai minyak kelapa. Dampaknya jarak antar molekul bahan bakar menjadi lebih kecil, sehingga kemungkinan untuk efektif tabrakan sangat besar. Fenomena ini dapat meningkatkan reaktivitas molekul bahan bakar sehingga mudah terbakar dan laju pembakaran difusi meningkat menghasilkan nyala api bulat, tinggi nyala api rendah dan emisi hydrocarbon menurun dan lebih stabil dibandingkan dengan campuran 2,5-dimethylfuran lainnya.

  • Open Access

    Peranan medan magnet dan campuran etanol-biodiesel minyak jelantah pada pembakaran droplet terhadap perilaku api dan emisi gas buang

    by D. Perdana, S.F.W.A. Fiyanto

    Petroleum reserves are increasingly depleting, causing a scarcity of petroleum fuel caused by the rapid progress of transportation and the manufacturing industry. This condition forces researchers to search for and develop new renewable energy source. The purpose of research is to understanding and determines role of north-south (U-S) and south-south (S-S) magnetic fields to blend waste cooking oil biodiesel-ethanol on flame evolution, flue gas emissions, and temperature during droplet combustion. Waste cooking oil biodiesel and ethanol were used in this research by adding variations in the direction of repulsive and attractive magnetic fields with an intensity of 11000 gauss. Diameter of droplets tested was 0.3 mm and was placed on a type K thermocouple wire with diameter of 0.1 mm. This research found the role of attractive magnetic field (U-S) in blend waste cooking oil biodiesel-ethanol 20% to produce the shortest flame evolution of 704 ms, lowest CO of 165 ppm, and highest temperature of 828.5 oC. This happens because ethanol has a low flash point and large oxygen content, causing the combustion reaction to occur rapidly. The attractive of magnetic field (U-S) plays a role on attracting oxygen around flame to enter combustion reaction, while the H2O resulting from combustion is pumped out of flame.

  • Open Access

    Effect of variation concentrations of cajuput oil and magnets on engine performance and flue gas emissions

    by Dony Perdana, Nur Said, Rizalman Mamat

    This studies proposes the effect of variations concentration of cajupuut oil and magnetic field of attraction on internal combustion engine performance and flue gas emissions. The increasing demand for petroleum energy is increasing, in line with the rising levels of flue gas emissions produced using transportation and the industrial world. Therefore, environmentally friendly alternative fuels are needed. Because the availability of fossil fuels cannot be renewed and their existence is increasingly depleting. This problems can overcome by saving fuels consumption. One way to save fuels are by adding bio-additives from cajupuut oil and a magnetic field to the fuel line. This research uses a direct test method using tools like a chassis dynamometer and gas analyzer. Pertalite fuel is mixed with various concentrations of cajupuut oil, six cc, eight cc, and ten cc and with addition of a magnetic fields strength of 10,000 Gauss of the genio motorcycle fuel line. This research has found that influence of variation of concentration in cajupuut oil and the magnetic field of attraction significantly impact engine performance and flue gas emissions. A mixture of eucalyptus ten ml with a magnetic field of attraction produces the highest maximum power and torque of 8.35 Hp and 11.77 Nm, respectively. Meanwhile, CO emissions have a level of 0.1%, but the highest CO2 level is 9.6% compared to other concentrations.

  • Open Access

    Potential of Steam Generating by The PMMA Fresnel Lens Concentrator for Indoor Solar Cooker Application

    by Asrori Asrori, Pondi Udianto, Elka Faizal, Muhammad Akhlis Rizza, Kris Witono, Dony Perdana

    Solar power is an alternative energy source that can be used for cooking. It is a simple, secure, and useful way to cook food without using conventional fuels that pollute the air. Solar cookers offer various benefits to the user’s health, productivity, and income as well as to the environment. Solar energy is abundant in a tropical country like Indonesia, making it a dependable and sustainable of energy resource. The study’s goal is to analyze the potency of steam produced by a solar cooker that uses a Fresnel lens concentrator. The thermal performance of the Fresnel lens concentrator with a conical receiver on the solar cooker prototype is discussed in this research. In the construction of solar cookers, PMMA (Polymethyl-Methacrylate) Fresnel lenses, manual trackers, and conical receiver types are used. The research conducts an experimental analysis of the thermal performance of the prototype solar cooker using a Fresnel lens concentrator with a conical receiver. This empirical approach provides valuable data on the efficiency and effectiveness of the solar cooker design. The experiment result shows the cumulative average solar irradiation, the average collection of solar energy per time of Fresnel lens concentrator, and the heat utilized of steam from conical receiver are 709.09 W/m², 456.14 Watt, and 383.88 Watt, respectively. The results of this study suggest that Fresnel lens concentrators are a promising development for indoor solar cookers and therefore provide a pathway for increased utilization of solar cooking technology.


  • Open Access

    Flame Characteristic Of Premix Combustion Of Jatropha Curcas Oil And Cotton Seed The Addition Of Various Magnetic Field Directions

    by Mochammad Khoirul Rosidin, Dony Perdana, Khoirul Anam As Syukri, Firnanda Sumanjaya Putra, Muhamad Hanifudin

    This study investigates an effects of various magnetic fieldsdirection on flames characteristic of premix combustions. Research is important as a reserve a fossil fuel using environmental friendly vegetable oil.Jatrophacurcas oil is mixed with cotton seeds (50% blend) as fuel.Experimentare carried out on cylindrical type burner. Vegetable oils were loaded on boiler, then heated on LPG stoves, while air was obtained from the compressor. Grade N52 nickel neodymium magnets atintensitymagnetic fieldsof 1.1 T were used in this study. The combustion characteristics are identified from the flame image and the temperature signal at the burner tip. The flame image is recorded using a video camera at highspeed, 120 frames per second. This research found that the magnetic field of an attractive produces a brighter, wider, and more stable flame compared to a repulsive magnet and without. The magnetic field changes the orientation of the hydrocarbon from the para state to the ortho state, so that it tends to break down the fuel molecules resulting in more complete and faster combustion causing the flame temperature to increase, but the flame height decreases.