Nguyen Thi Huong
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Nguyen Thi Huong has a total of 149 co-authors. Here are the top co-authors by number of shared publications:
Vu Minh Thanh
Institute of Materials, Biology and Environment , 17 Hoang Sam , Nghia Do
12 shared publicationsNguyen Ngoc Son
Institute of Materials, Biology and Environment
9 shared publicationsVu Quang Hung
Institute of Materials, Biology and Environment
4 shared publicationsNgoc Son Nguyen
3 shared publications- Nguyen Ngoc Son
Institute of Chemistry and Materials, 17 Hoang Sam, Cau Giay, Hanoi, Vietnam
3 shared publications Pham Thi Mai Huong
Hanoi University of Industry, 298 Cau Dien, Bac Tu Liem, Ha Noi 100000 , Vietnam
3 shared publications
Latest Publications
- Open Access
- 27 October 2026
- Published by American Chemical Society (ACS) in ACS Omega
- Vol. 11 (44) , 69336-69347
Calcium Alginate/Polyaniline-PSS Core–Shell Particles: Synthesis and Multi-Mechanism Water Vapor Adsorption Behavior
Core–shell composite particles combining a calcium alginate (Alg-Ca) hydrogel core with a polyaniline/polystyrene sulfonic acid (PANi/PSS) conductive polymer shell were synthesized and evaluated for water vapor adsorption applications. The resulting particles exhibited a well-defined, phase-separated architecture, comprising a highly hydrated, porous hydrogel core encapsulated by a structurally and chemically distinct shell, consistent with successful incorporation of the sulfonated conductive polymer onto the surface of the alginate network. The core and shell regions displayed markedly different thermal decomposition behavior, confirming their compositional distinction and demonstrating that the composite retains thermal stability within the operating range typical of gas-sensing applications. Kinetic analysis of water vapor adsorption as a function of relative humidity (RH, 50–95%) and temperature (25–45 °C) revealed a systematic transition among pseudo-first-order, pseudo-second-order, and Elovich kinetic models. At moderate RH, adsorption was governed by chemically homogeneous interactions at polar functional groups, while at near-saturation RH, the mechanism shifted toward multilayer adsorption and capillary condensation. Temperature-dependent measurements at fixed RH further revealed an unusual diffusion–reaction–diffusion transition across the studied temperature range. Across three adsorption–regeneration cycles, adsorption capacity increased progressively while the dominant kinetic model at each condition remained unchanged, indicating that regeneration preserves the fundamental water–material interaction mechanism while increasing the number of accessible active sites. These findings establish Alg-Ca@PANI–PSS as a structurally robust, reusable, and mechanistically well-characterized composite for humidity-responsive and gas-sensing applications.
- 27 October 2026
- Published by American Chemical Society (ACS) in ACS Omega
- Vol. 11 (44) , 69336-69347
Open AccessCalcium Alginate/Polyaniline-PSS Core–Shell Particles: Synthesis and Multi-Mechanism Water Vapor Adsorption Behavior
Core–shell composite particles combining a calcium alginate (Alg-Ca) hydrogel core with a polyaniline/polystyrene sulfonic acid (PANi/PSS) conductive polymer shell were synthesized and evaluated for water vapor adsorption applications. The resulting particles exhibited a well-defined, phase-separated architecture, comprising a highly hydrated, porous hydrogel core encapsulated by a structurally and chemically distinct shell, consistent with successful incorporation of the sulfonated conductive polymer onto the surface of the alginate network. The core and shell regions displayed markedly different thermal decomposition behavior, confirming their compositional distinction and demonstrating that the composite retains thermal stability within the operating range typical of gas-sensing applications. Kinetic analysis of water vapor adsorption as a function of relative humidity (RH, 50–95%) and temperature (25–45 °C) revealed a systematic transition among pseudo-first-order, pseudo-second-order, and Elovich kinetic models. At moderate RH, adsorption was governed by chemically homogeneous interactions at polar functional groups, while at near-saturation RH, the mechanism shifted toward multilayer adsorption and capillary condensation. Temperature-dependent measurements at fixed RH further revealed an unusual diffusion–reaction–diffusion transition across the studied temperature range. Across three adsorption–regeneration cycles, adsorption capacity increased progressively while the dominant kinetic model at each condition remained unchanged, indicating that regeneration preserves the fundamental water–material interaction mechanism while increasing the number of accessible active sites. These findings establish Alg-Ca@PANI–PSS as a structurally robust, reusable, and mechanistically well-characterized composite for humidity-responsive and gas-sensing applications.
- Open Access
- 14 October 2026
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 16 (45) , 58606-58619
Core–shell alginate–sulfonic acid networks crosslinked by multivalent cations (Ca 2+ /Al 3+ ) for atmospheric water harvesting
A ternary core-shell hydrogel (Alg/CaAl@PSS) with a Ca 2+ /Al 3+ -alginate core and polyaniline/polystyrene sulfonic acid shell was synthesised through ionotropic gelation and interfacial polymerisation.
- 14 October 2026
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 16 (45) , 58606-58619
Open AccessCore–shell alginate–sulfonic acid networks crosslinked by multivalent cations (Ca 2+ /Al 3+ ) for atmospheric water harvesting
A ternary core-shell hydrogel (Alg/CaAl@PSS) with a Ca 2+ /Al 3+ -alginate core and polyaniline/polystyrene sulfonic acid shell was synthesised through ionotropic gelation and interfacial polymerisation.
- Open Access
- 30 September 2026
- Published by Vietnam Association of Catalysis and Adsorption in Vietnam Journal of Catalysis and Adsorption
- Vol. 15 (3) , 36-41
Effect of boric acid on the corrosion behavior of Pb-Sb alloy grids in lead-acid battery electrolyte solution
Positive grid corrosion in lead-acid batteries (LABs) remains one of the principal factors limiting battery service life. This study investigated the influence of boric acid on the corrosion behavior of Pb-Sb 2 wt% alloy grids in a sulfuric acid electrolyte (d = 1.27 g.cm-3) by cyclic voltammetry (CV), linear sweep voltammetry (LSV), and Raman spectroscopy. Boric acid markedly attenuated the electrochemical activity of the alloy, as evidenced by lower CV peak currents and reduced corrosion kinetics. Raman spectroscopy confirmed the formation of PbSO₄ and mixed sulfate/oxide corrosion products after cycling. Notably, the blank and boric-acid-containing samples exhibited identical peak positions but substantially different intensities, indicating that H₃BO₃ suppresses corrosion-film growth without altering the underlying corrosion chemistry. After 24 h, the corrosion-inhibiting effect of the boric acid additive becomes clearly evident compared to the additive-free sample: the corrosion current density Jcorr= 6.40 × 10⁻⁸ A cm⁻² is reduced by a factor of two, while the polarization resistance Rp = 428540 Ω increases by 2.6 times relative to the sample without an additive. Collectively, these results demonstrate that H₃BO₃ acts as an effective electrolyte additive, forming a thinner and more stable protective layer on Pb-Sb grids and thereby enhancing their corrosion resistance in a lead-acid battery.
- 30 September 2026
- Published by Vietnam Association of Catalysis and Adsorption in Vietnam Journal of Catalysis and Adsorption
- Vol. 15 (3) , 36-41
Open AccessEffect of boric acid on the corrosion behavior of Pb-Sb alloy grids in lead-acid battery electrolyte solution
Positive grid corrosion in lead-acid batteries (LABs) remains one of the principal factors limiting battery service life. This study investigated the influence of boric acid on the corrosion behavior of Pb-Sb 2 wt% alloy grids in a sulfuric acid electrolyte (d = 1.27 g.cm-3) by cyclic voltammetry (CV), linear sweep voltammetry (LSV), and Raman spectroscopy. Boric acid markedly attenuated the electrochemical activity of the alloy, as evidenced by lower CV peak currents and reduced corrosion kinetics. Raman spectroscopy confirmed the formation of PbSO₄ and mixed sulfate/oxide corrosion products after cycling. Notably, the blank and boric-acid-containing samples exhibited identical peak positions but substantially different intensities, indicating that H₃BO₃ suppresses corrosion-film growth without altering the underlying corrosion chemistry. After 24 h, the corrosion-inhibiting effect of the boric acid additive becomes clearly evident compared to the additive-free sample: the corrosion current density Jcorr= 6.40 × 10⁻⁸ A cm⁻² is reduced by a factor of two, while the polarization resistance Rp = 428540 Ω increases by 2.6 times relative to the sample without an additive. Collectively, these results demonstrate that H₃BO₃ acts as an effective electrolyte additive, forming a thinner and more stable protective layer on Pb-Sb grids and thereby enhancing their corrosion resistance in a lead-acid battery.
- 25 August 2026
- Published by Academy of Military Science and Technology in Journal of Military Science and Technology
- Vol. 113, 96-103
Research on the microstructure transformation and mechanical properties of lead alloy layer covering copper electrodes of high-capacity lead-acid batteries upon heat treatment
The lead alloy layer on the copper electrodes of high-capacity lead-acid batteries is manufactured by gravity casting. In the cast state, the lead alloy layer exhibits a dendritic, unbalanced crystal structure, a high hardness of 27.9 HV, high residual internal stress, and a high resistance of 0.312 ÷ 0.420 mΩ, making it prone to microcracks and unfavourable for the battery. Through heat treatment, including quenching at 220 °C for 60 minutes followed by aging at 110 °C for 7 hours, the cast microstructure transforms into a more balanced, polygonal, axial crystal structure. The hardened phase forms, achieving an optimal hardness of 16.2 HV, and the average resistance is reduced to 0.06 mΩ, making it suitable for the manufacture of high-capacity lead-acid batteries.
- 25 August 2026
- Published by Academy of Military Science and Technology in Journal of Military Science and Technology
- Vol. 113, 96-103
Research on the microstructure transformation and mechanical properties of lead alloy layer covering copper electrodes of high-capacity lead-acid batteries upon heat treatment
The lead alloy layer on the copper electrodes of high-capacity lead-acid batteries is manufactured by gravity casting. In the cast state, the lead alloy layer exhibits a dendritic, unbalanced crystal structure, a high hardness of 27.9 HV, high residual internal stress, and a high resistance of 0.312 ÷ 0.420 mΩ, making it prone to microcracks and unfavourable for the battery. Through heat treatment, including quenching at 220 °C for 60 minutes followed by aging at 110 °C for 7 hours, the cast microstructure transforms into a more balanced, polygonal, axial crystal structure. The hardened phase forms, achieving an optimal hardness of 16.2 HV, and the average resistance is reduced to 0.06 mΩ, making it suitable for the manufacture of high-capacity lead-acid batteries.
- Open Access
- 29 June 2026
- Published by SAGE Publications in Natural Product Communications
- Vol. 21 (6)
Microwave-Ultrasound Assisted Extraction and Characterization of Phenolic Compounds From Heliotropium foertherianum : Optimization, Isolation, and Biological Activity Evaluation
Objective: This study aimed to optimize microwave-ultrasound-assisted extraction (MUAE) for the recovery of phenolic acids from Heliotropium foertherianum leaves collected on the Truong Sa Islands, Vietnam, with a particular focus on rosmarinic acid (RA), caffeic acid (CA), and ferulic acid (FA), and to investigate the biological relevance of the obtained fractions and isolated compounds. Methods: Extraction parameters were optimized using response surface methodology (RSM), with ethanol concentration, liquid-to-solid ratio, and extraction time as independent variables, and RA, CA, and FA contents, determined by HPLC, as response variables. The crude extract was further partitioned into n -hexane, chloroform, ethyl acetate, n -butanol, and aqueous fractions, which were evaluated for antioxidant, antimicrobial, and anti-inflammatory activities using DPPH radical scavenging, agar-well diffusion, and nitric oxide inhibition assays, respectively. The major phenolic acids were subsequently isolated and structurally characterized by MS, FT-IR, Raman, and NMR analyses. Results: The optimized MUAE conditions were 50% ethanol, a liquid-to-solid ratio of 1:15, and an extraction time of 40 min, under which RA, FA, and CA reached 8.356, 3.92, and 0.125 mg/g, respectively. Among the fractions, the n -butanol extract was the most enriched in phenolics, with RA representing 58.2% of the total phenolic compounds, and it displayed the strongest antioxidant, anti-inflammatory, and antimicrobial activities. Conclusion: These findings demonstrate that MUAE is an effective and environmentally favorable strategy for recovering bioactive phenolic acids from H.foertherianum , particularly RA-rich fractions.
- 29 June 2026
- Published by SAGE Publications in Natural Product Communications
- Vol. 21 (6)
Open AccessMicrowave-Ultrasound Assisted Extraction and Characterization of Phenolic Compounds From Heliotropium foertherianum : Optimization, Isolation, and Biological Activity Evaluation
Objective: This study aimed to optimize microwave-ultrasound-assisted extraction (MUAE) for the recovery of phenolic acids from Heliotropium foertherianum leaves collected on the Truong Sa Islands, Vietnam, with a particular focus on rosmarinic acid (RA), caffeic acid (CA), and ferulic acid (FA), and to investigate the biological relevance of the obtained fractions and isolated compounds. Methods: Extraction parameters were optimized using response surface methodology (RSM), with ethanol concentration, liquid-to-solid ratio, and extraction time as independent variables, and RA, CA, and FA contents, determined by HPLC, as response variables. The crude extract was further partitioned into n -hexane, chloroform, ethyl acetate, n -butanol, and aqueous fractions, which were evaluated for antioxidant, antimicrobial, and anti-inflammatory activities using DPPH radical scavenging, agar-well diffusion, and nitric oxide inhibition assays, respectively. The major phenolic acids were subsequently isolated and structurally characterized by MS, FT-IR, Raman, and NMR analyses. Results: The optimized MUAE conditions were 50% ethanol, a liquid-to-solid ratio of 1:15, and an extraction time of 40 min, under which RA, FA, and CA reached 8.356, 3.92, and 0.125 mg/g, respectively. Among the fractions, the n -butanol extract was the most enriched in phenolics, with RA representing 58.2% of the total phenolic compounds, and it displayed the strongest antioxidant, anti-inflammatory, and antimicrobial activities. Conclusion: These findings demonstrate that MUAE is an effective and environmentally favorable strategy for recovering bioactive phenolic acids from H.foertherianum , particularly RA-rich fractions.
- Open Access
- 25 April 2026
- Published by Academy of Military Science and Technology in Journal of Military Science and Technology
- Vol. 110, 109-116
Investigative synthesis and optimization of Ca²⁺/Al³⁺ dual cross-linked alginate hydrogel beads for water vapor adsorption
Spherical alginate hydrogel beads simultaneously cross-linked by calcium and aluminium ions were fabricated via extrusion-gelation to investigate their potential for atmospheric water harvesting. Alginate concentration (1–5 wt%) and calcium/aluminium molar ratios (1:1, 1:3, 3:1) were systematically optimized. Scanning electron microscopy demonstrated that 2% alginate with a 1:1 cation ratio yielded the most uniform and porous surface morphology, while elevated aluminium content promoted undesirable surface crystallization. The highest specific surface area was confirmed (15.349 m²/g) for the 1:1 formulation with broad mesopore distribution. Fourier-transform infrared spectroscopy validated calcium-oxygen and aluminium-oxygen cross-links alongside characteristic alginate functional groups, and energy-dispersive X-ray mapping confirmed homogeneous elemental distribution via the egg-box mechanism. Thermogravimetric analysis revealed dehydration at 173.8 °C, alginate pyrolysis total 49.65% mass loss to 700 °C, and approximately 50% thermally stable residue. Water vapor adsorption reached 4.22 g/g at 90% relative humidity and 3.84 g/g at 70%, with over 80% uptake achieved within 15–20 hours. Thermal regeneration retained 92-97% capacity over three cycles, establishing these hydrogels as promising low-cost sorbents for atmospheric water harvesting.
- 25 April 2026
- Published by Academy of Military Science and Technology in Journal of Military Science and Technology
- Vol. 110, 109-116
Open AccessInvestigative synthesis and optimization of Ca²⁺/Al³⁺ dual cross-linked alginate hydrogel beads for water vapor adsorption
Spherical alginate hydrogel beads simultaneously cross-linked by calcium and aluminium ions were fabricated via extrusion-gelation to investigate their potential for atmospheric water harvesting. Alginate concentration (1–5 wt%) and calcium/aluminium molar ratios (1:1, 1:3, 3:1) were systematically optimized. Scanning electron microscopy demonstrated that 2% alginate with a 1:1 cation ratio yielded the most uniform and porous surface morphology, while elevated aluminium content promoted undesirable surface crystallization. The highest specific surface area was confirmed (15.349 m²/g) for the 1:1 formulation with broad mesopore distribution. Fourier-transform infrared spectroscopy validated calcium-oxygen and aluminium-oxygen cross-links alongside characteristic alginate functional groups, and energy-dispersive X-ray mapping confirmed homogeneous elemental distribution via the egg-box mechanism. Thermogravimetric analysis revealed dehydration at 173.8 °C, alginate pyrolysis total 49.65% mass loss to 700 °C, and approximately 50% thermally stable residue. Water vapor adsorption reached 4.22 g/g at 90% relative humidity and 3.84 g/g at 70%, with over 80% uptake achieved within 15–20 hours. Thermal regeneration retained 92-97% capacity over three cycles, establishing these hydrogels as promising low-cost sorbents for atmospheric water harvesting.
- 27 February 2026
- Published by Thai Nguyen University in TNU Journal of Science and Technology
- Vol. 231 (02/S) , 277-286
INVESTIGATION AND MANUFACTURING OF SPECIALTY COMPOSITE FOR LEAD-ACID BATTERY CASINGS
Vỏ bình ắc quy chì-axit dung lượng lớn đòi hỏi vật liệu có độ bền cơ học cao, kháng axit, chống thấm nước đặc biệt trong các ứng dụng lưu trữ năng lượng tái tạo. Nghiên cứu sử dụng các phương pháp phân tích hiện đại: IR, SEM-EDX, TGA định danh nhóm vật liệu vỏ bình mẫu. Khảo sát ảnh hưởng tỉ lệ chất đóng rắn, xúc tác tới khả năng gia công, tính chất cơ lý để vật liệu composite đặc chủng vỏ bình ắc quy chì-axit tương đương sản phẩm của Nga. Trên cơ sở kết quả phân tích vật liệu mẫu, nghiên cứu đã lựa chọn vật liệu, gia công theo phương pháp lăn ép, đạt được độ bền kéo 328 MPa, độ bền uốn: 329,56 MPa, độ thấm ướt <0,1% sau 7 ngày, khả năng kháng axit tốt, không thay đổi đáng kể độ bền cơ lý sau khi ngâm trong dung dịch H2SO4 trong 14 ngày đáp ứng yêu cầu làm vật liệu vỏ bình cho ắc quy chì axit dung lượng lớn.
- 27 February 2026
- Published by Thai Nguyen University in TNU Journal of Science and Technology
- Vol. 231 (02/S) , 277-286
INVESTIGATION AND MANUFACTURING OF SPECIALTY COMPOSITE FOR LEAD-ACID BATTERY CASINGS
Vỏ bình ắc quy chì-axit dung lượng lớn đòi hỏi vật liệu có độ bền cơ học cao, kháng axit, chống thấm nước đặc biệt trong các ứng dụng lưu trữ năng lượng tái tạo. Nghiên cứu sử dụng các phương pháp phân tích hiện đại: IR, SEM-EDX, TGA định danh nhóm vật liệu vỏ bình mẫu. Khảo sát ảnh hưởng tỉ lệ chất đóng rắn, xúc tác tới khả năng gia công, tính chất cơ lý để vật liệu composite đặc chủng vỏ bình ắc quy chì-axit tương đương sản phẩm của Nga. Trên cơ sở kết quả phân tích vật liệu mẫu, nghiên cứu đã lựa chọn vật liệu, gia công theo phương pháp lăn ép, đạt được độ bền kéo 328 MPa, độ bền uốn: 329,56 MPa, độ thấm ướt <0,1% sau 7 ngày, khả năng kháng axit tốt, không thay đổi đáng kể độ bền cơ lý sau khi ngâm trong dung dịch H2SO4 trong 14 ngày đáp ứng yêu cầu làm vật liệu vỏ bình cho ắc quy chì axit dung lượng lớn.
- Open Access
- 30 September 2025
- Published by Vietnam Association of Catalysis and Adsorption in Vietnam Journal of Catalysis and Adsorption
- Vol. 14 (3) , 76-81
Synthesis and application of spherical Alginate/CaCl2 hydrogel beads for water harvesting from air
This study presents the synthesis and characterization of spherical hydrogel materials based on alginate cross-linked with Ca²⁺ cations, with particle diameters ranging from 0.20 to 0.25 cm. The structural properties of the synthesized materials were evaluated using X-ray diffraction, scanning electron microscopy (SEM), energy-dispersive X-ray mapping (EDX-mapping), Fourier-transform infrared spectroscopy (FT-IR), and Brunauer-Emmett-Teller (BET) surface area analysis. The water vapor adsorption capacity of the Alginate/CaCl₂ hydrogel spheres reached 220 – 270 wt% relative to the dry weight, depending on ambient humidity conditions, with equilibrium sorption capacity reaching 80% of the saturation value within 4 hours. Furthermore, the material demonstrated excellent regeneration capability at 140°C, maintaining 80-90% of its original sorption capacity after 3 cycles regeneration cycles. These results indicate the potential of alginate-based hydrogel spheres as efficient and recyclable sorbents for sustainable atmospheric water harvesting applications.
- 30 September 2025
- Published by Vietnam Association of Catalysis and Adsorption in Vietnam Journal of Catalysis and Adsorption
- Vol. 14 (3) , 76-81
Open AccessSynthesis and application of spherical Alginate/CaCl2 hydrogel beads for water harvesting from air
This study presents the synthesis and characterization of spherical hydrogel materials based on alginate cross-linked with Ca²⁺ cations, with particle diameters ranging from 0.20 to 0.25 cm. The structural properties of the synthesized materials were evaluated using X-ray diffraction, scanning electron microscopy (SEM), energy-dispersive X-ray mapping (EDX-mapping), Fourier-transform infrared spectroscopy (FT-IR), and Brunauer-Emmett-Teller (BET) surface area analysis. The water vapor adsorption capacity of the Alginate/CaCl₂ hydrogel spheres reached 220 – 270 wt% relative to the dry weight, depending on ambient humidity conditions, with equilibrium sorption capacity reaching 80% of the saturation value within 4 hours. Furthermore, the material demonstrated excellent regeneration capability at 140°C, maintaining 80-90% of its original sorption capacity after 3 cycles regeneration cycles. These results indicate the potential of alginate-based hydrogel spheres as efficient and recyclable sorbents for sustainable atmospheric water harvesting applications.
- Open Access
- 30 September 2025
- Published by Vietnam Association of Catalysis and Adsorption in Vietnam Journal of Catalysis and Adsorption
- Vol. 14 (3) , 50-56
Development and Characterization of Antimicrobial PLA/PVA/Ag Nanocomposite Films for Food Packaging Applications
This study presents the fabrication and characterization of biodegradable nanocomposite films based on a Polylactic acid (PLA) matrix, incorporating Polyvinyl alcohol (PVA) and silver nanoparticles (AgNPs), for active food packaging applications. PVA/Ag nanocomposites were synthesized via an ultrasound-assisted chemical reduction method before their integration into the PLA matrix using a solvent casting technique. Characterization analyses (FT-IR, SEM, TEM) confirmed the successful formation of the composite material with a relatively uniform dispersion of silver nanoparticles within the polymer matrix. The PLA/PVA/Ag film with a 1.0 wt% content (F/1.0) exhibited optimal mechanical properties, with a tensile strength of 5.77 MPa, nearly 20% higher than the neat PLA control film. Notably, the composite material demonstrated broad-spectrum antimicrobial activity, effectively inhibiting the growth of B. subtilis, E. coli, and S. cerevisiae in a dose-dependent manner. These findings affirm the potential of PLA/PVA/Ag films as an advanced, sustainable, and effective packaging material for the food preservation industry.
- 30 September 2025
- Published by Vietnam Association of Catalysis and Adsorption in Vietnam Journal of Catalysis and Adsorption
- Vol. 14 (3) , 50-56
Open AccessDevelopment and Characterization of Antimicrobial PLA/PVA/Ag Nanocomposite Films for Food Packaging Applications
This study presents the fabrication and characterization of biodegradable nanocomposite films based on a Polylactic acid (PLA) matrix, incorporating Polyvinyl alcohol (PVA) and silver nanoparticles (AgNPs), for active food packaging applications. PVA/Ag nanocomposites were synthesized via an ultrasound-assisted chemical reduction method before their integration into the PLA matrix using a solvent casting technique. Characterization analyses (FT-IR, SEM, TEM) confirmed the successful formation of the composite material with a relatively uniform dispersion of silver nanoparticles within the polymer matrix. The PLA/PVA/Ag film with a 1.0 wt% content (F/1.0) exhibited optimal mechanical properties, with a tensile strength of 5.77 MPa, nearly 20% higher than the neat PLA control film. Notably, the composite material demonstrated broad-spectrum antimicrobial activity, effectively inhibiting the growth of B. subtilis, E. coli, and S. cerevisiae in a dose-dependent manner. These findings affirm the potential of PLA/PVA/Ag films as an advanced, sustainable, and effective packaging material for the food preservation industry.
- Open Access
- 29 July 2025
- Published by American Chemical Society (ACS) in ACS Omega
- Vol. 10 (31) , 34331-34341
Graphene/Fe3O4/CuO Nanocomposite as an Evaluation of Enhanced Thermal Decomposition of Ammonium Perchlorate via the Ultrasonic-Assisted Method
Graphene/Fe3O4/CuO nanocomposites were successfully synthesized using an ultrasonic-assisted method, with Fe3O4 and CuO nanoparticles (10 to 20 nm in size) uniformly distributed on graphene sheets. The synthesis process was optimized through X-ray diffraction (XRD) analysis, and the nanocomposites were further characterized for morphology, elemental distribution, specific surface area, and bonding dynamics. Differential scanning calorimetry (DSC) revealed that adding 2 and 5 wt % of the composite reduced the thermal decomposition temperatures of ammonium perchlorate (AP) by 86.8 and 91.2 °C, decreased activation energy from 357.2 to 226.6 and 182.0 kJ/mol, and increased the heat of high-temperature decomposition (HTD) by 72.1% and 70.0%, respectively. Compared to other graphene-based catalysts, the synthesized composite demonstrated superior catalytic efficiency, highlighting its potential as a promising additive for enhancing the thermal decomposition of AP in future applications.
- 29 July 2025
- Published by American Chemical Society (ACS) in ACS Omega
- Vol. 10 (31) , 34331-34341
Open AccessGraphene/Fe3O4/CuO Nanocomposite as an Evaluation of Enhanced Thermal Decomposition of Ammonium Perchlorate via the Ultrasonic-Assisted Method
Graphene/Fe3O4/CuO nanocomposites were successfully synthesized using an ultrasonic-assisted method, with Fe3O4 and CuO nanoparticles (10 to 20 nm in size) uniformly distributed on graphene sheets. The synthesis process was optimized through X-ray diffraction (XRD) analysis, and the nanocomposites were further characterized for morphology, elemental distribution, specific surface area, and bonding dynamics. Differential scanning calorimetry (DSC) revealed that adding 2 and 5 wt % of the composite reduced the thermal decomposition temperatures of ammonium perchlorate (AP) by 86.8 and 91.2 °C, decreased activation energy from 357.2 to 226.6 and 182.0 kJ/mol, and increased the heat of high-temperature decomposition (HTD) by 72.1% and 70.0%, respectively. Compared to other graphene-based catalysts, the synthesized composite demonstrated superior catalytic efficiency, highlighting its potential as a promising additive for enhancing the thermal decomposition of AP in future applications.