Yanjun Fang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Yanjun Fang has a total of 228 co-authors. Here are the top co-authors by number of shared publications:
Deren Yang
26 shared publicationsLixiang Wang
State Key Laboratory of Silicon and Advanced Semiconductor Materials, School of Materials Science and Engineering, and Zhejiang Provincial Key Laboratory of Optoelectronic Functional Materials and Devices, Zhejiang University, Hangzhou, China
16 shared publicationsMinxing Yan
State Key Laboratory of Silicon and Advanced Semiconductor Materials and School of Materials Science and Engineering Zhejiang University Hangzhou 310027 P. R. China
11 shared publications- Qingfeng Dong
State Key Laboratory of Supramolecular Structure and Materials, College of Chemistry, Jilin University, Changchun 130012, P. R. China
10 shared publications Hui Liu
State Key Laboratory of Silicon and Advanced Semiconductor Materials School of Materials Science and Engineering Zhejiang University Hangzhou 310027 P. R. China
9 shared publicationsJing Wang
State Key Laboratory of Silicon Materials, School of Materials Science and Engineering, Zhejiang University, Hangzhou, China
9 shared publications
Latest Publications
- 13 November 2026
- Published by Wiley in Advanced Functional Materials
Organic Photodetectors With Surpassing 50% External Quantum Efficiency at 1100 nm Using a Narrow Bandgap Donor Polymer
Organic photodetectors (OPDs) have garnered significant attention for their low‐cost fabrication, mechanical flexibility, and tunable spectral response. However, low external quantum efficiency (EQE) in short‐wave infrared (SWIR), especially above silicon's cutoff (≈1100 nm), limits their application. Herein, we report SWIR‐OPDs using a narrow‐bandgap donor polymer, PDCBT‐DP2O, blended with the acceptor BTPCN. The devices achieve an EQE of 51.1% at 1100 nm under −3 V bias. The incorporation of 5,6‐dicyano‐2,1,3‐benzothiadiazole and 3,3′‐dimethoxy‐2,2′‐bithiophene units significantly narrows the polymer bandgap, pushing absorption past silicon's limit. Moreover, the finely tuned alkyl side chains improve the skeleton coplanarity and solid‐state packing, resulting in a longer exciton diffusion length, higher carrier mobility, and reduced trap density. These combined effects facilitate the conversion of absorbed photons into collected charge carriers. As a result, the OPD achieves detectivity ( D sh * ) over 10 11 Jones across 320–1250 nm at −0.5 V, which ranks among the highest reported for SWIR‐OPDs. We also demonstrate sensitive SWIR sensing in representative application prototypes including optical communication, noncontact photoplethysmography, broadband spectroscopy and SWIR imaging. This work proves narrow bandgap donor polymers as a distinct material pathway for high‐performance SWIR photodetection.
- 13 November 2026
- Published by Wiley in Advanced Functional Materials
Organic Photodetectors With Surpassing 50% External Quantum Efficiency at 1100 nm Using a Narrow Bandgap Donor Polymer
Organic photodetectors (OPDs) have garnered significant attention for their low‐cost fabrication, mechanical flexibility, and tunable spectral response. However, low external quantum efficiency (EQE) in short‐wave infrared (SWIR), especially above silicon's cutoff (≈1100 nm), limits their application. Herein, we report SWIR‐OPDs using a narrow‐bandgap donor polymer, PDCBT‐DP2O, blended with the acceptor BTPCN. The devices achieve an EQE of 51.1% at 1100 nm under −3 V bias. The incorporation of 5,6‐dicyano‐2,1,3‐benzothiadiazole and 3,3′‐dimethoxy‐2,2′‐bithiophene units significantly narrows the polymer bandgap, pushing absorption past silicon's limit. Moreover, the finely tuned alkyl side chains improve the skeleton coplanarity and solid‐state packing, resulting in a longer exciton diffusion length, higher carrier mobility, and reduced trap density. These combined effects facilitate the conversion of absorbed photons into collected charge carriers. As a result, the OPD achieves detectivity ( D sh * ) over 10 11 Jones across 320–1250 nm at −0.5 V, which ranks among the highest reported for SWIR‐OPDs. We also demonstrate sensitive SWIR sensing in representative application prototypes including optical communication, noncontact photoplethysmography, broadband spectroscopy and SWIR imaging. This work proves narrow bandgap donor polymers as a distinct material pathway for high‐performance SWIR photodetection.
- Open Access
- 25 September 2026
- Published by Springer Nature in Nature Communications
- Vol. 17 (1)
High-sensitivity deep shortwave infrared organic photodetectors enabled by selenium-integrated quinoidal molecular semiconductor
Developing organic photodetectors (OPDs) that can detect in deep shortwave infrared (deep-SWIR) region (1.2–1.6 μm) is technologically important. Yet, the performance of the state-of-the-art deep-SWIR OPDs remains substantially limited. Herein, we report a selenium-integrated quinoidal small molecular acceptor, SeBz-4Cl, enabling highly sensitive deep-SWIR photodetection. Selenium incorporation enhances quinoidal character along the conjugated backbone of the molecules, thus expanding absorption approaching 1.5 μm. Moreover, SeBz-4Cl with strengthened intermolecular interactions led to an ideal film morphology, which reduced Urbach energy and favored charge dynamics. Under −1 V voltage bias, the SeBz-4Cl-based OPD achieved a low dark current density of 2.97 × 10−7 A cm−2 and an external quantum efficiency (EQE) of 7.8% at 1310 nm, together with a high specific detectivity (D*) exceeding 1011 Jones across 500–1400 nm, representing advanced deep-SWIR OPD performance. Furthermore, an optical communication system and a flexible imager under 1.2 μm illumination were demonstrated, highlighting potential of these deep-SWIR OPDs for information electronics and next generation optoelectronic applications in future.
- 25 September 2026
- Published by Springer Nature in Nature Communications
- Vol. 17 (1)
Open AccessHigh-sensitivity deep shortwave infrared organic photodetectors enabled by selenium-integrated quinoidal molecular semiconductor
Developing organic photodetectors (OPDs) that can detect in deep shortwave infrared (deep-SWIR) region (1.2–1.6 μm) is technologically important. Yet, the performance of the state-of-the-art deep-SWIR OPDs remains substantially limited. Herein, we report a selenium-integrated quinoidal small molecular acceptor, SeBz-4Cl, enabling highly sensitive deep-SWIR photodetection. Selenium incorporation enhances quinoidal character along the conjugated backbone of the molecules, thus expanding absorption approaching 1.5 μm. Moreover, SeBz-4Cl with strengthened intermolecular interactions led to an ideal film morphology, which reduced Urbach energy and favored charge dynamics. Under −1 V voltage bias, the SeBz-4Cl-based OPD achieved a low dark current density of 2.97 × 10−7 A cm−2 and an external quantum efficiency (EQE) of 7.8% at 1310 nm, together with a high specific detectivity (D*) exceeding 1011 Jones across 500–1400 nm, representing advanced deep-SWIR OPD performance. Furthermore, an optical communication system and a flexible imager under 1.2 μm illumination were demonstrated, highlighting potential of these deep-SWIR OPDs for information electronics and next generation optoelectronic applications in future.
- 10 September 2026
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 18 (37) , 51326-51333
Suppressing Dark Current in Near-Infrared Organic Photodetectors by Employing a Donor–Insulator–Acceptor Architecture
Near-infrared organic photodetectors (NIR OPDs) have great potential for sensing and imaging systems. However, the high dark current level remains a major obstacle to achieving high sensitivity and weak light detection for NIR OPDs. Herein, we propose a strategy for dark current suppression by introducing an ultrathin insulating layer between the donor and acceptor, where the dark reverse-bias charge injection can be inhibited assisted by interfacial electrostatic modulation while efficient photoresponse is preserved. Based on that, the detector exhibits dark current density of 1.8 × 10−9 A cm−2 and spectral responsivity of 0.52 A W−1 at –1 V, yielding detectivity over 1013 Jones in the near-infrared region. Such low dark current and high detectivity enable detectors to realize noncontact physiological monitoring under NIR light. This work demonstrates the donor–insulator–acceptor architecture for suppressing dark current and improving weak optical detection, providing a general route toward high-performance NIR OPDs.
- 10 September 2026
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 18 (37) , 51326-51333
Suppressing Dark Current in Near-Infrared Organic Photodetectors by Employing a Donor–Insulator–Acceptor Architecture
Near-infrared organic photodetectors (NIR OPDs) have great potential for sensing and imaging systems. However, the high dark current level remains a major obstacle to achieving high sensitivity and weak light detection for NIR OPDs. Herein, we propose a strategy for dark current suppression by introducing an ultrathin insulating layer between the donor and acceptor, where the dark reverse-bias charge injection can be inhibited assisted by interfacial electrostatic modulation while efficient photoresponse is preserved. Based on that, the detector exhibits dark current density of 1.8 × 10−9 A cm−2 and spectral responsivity of 0.52 A W−1 at –1 V, yielding detectivity over 1013 Jones in the near-infrared region. Such low dark current and high detectivity enable detectors to realize noncontact physiological monitoring under NIR light. This work demonstrates the donor–insulator–acceptor architecture for suppressing dark current and improving weak optical detection, providing a general route toward high-performance NIR OPDs.
- Open Access
- 15 August 2026
- Published by Springer Nature in Nature Communications
- Vol. 17 (1) , 9826
Solution-phase transition zones govern crystallographic perfection in metal halide perovskite single crystals
- 15 August 2026
- Published by Springer Nature in Nature Communications
- Vol. 17 (1) , 9826
Open AccessSolution-phase transition zones govern crystallographic perfection in metal halide perovskite single crystals
- 30 June 2026
- Published by Wiley in Advanced Materials
- Vol. 38 (43) , e73895
Short‐Wave Infrared Organic Photodetectors With Ultralow Dark Current Density Under Biased Operating Conditions
Commercial photodetectors integrated on readout circuits typically operate under bias voltage, necessitating low dark current density ( J d ) to achieve high detectivity. However, suppressing J d remains a critical challenge for organic photodetectors (OPDs), particularly those operating in the short‐wave infrared (SWIR) region. Herein, we report SWIR‐OPDs that achieve ultralow J d under high bias voltage by developing a narrow bandgap p‐type polymer as the SWIR absorber, thereby establishing an alternative material platform for high‐performance SWIR‐OPDs. The new polymer PDCBT‐DTO2F adopts a push‐pull architecture comprising quaterthiophene donor units and 5,6‐dicyano‐2,1,3‐benzothiadiazole acceptor moieties. Substituting the alkyl chains on quaterthiophene units with alkoxy chains significantly enhanced the intramolecular charge transfer effect and backbone coplanarity. This modification simultaneously yielded intense SWIR absorption, high crystallinity, reduced trap density, and low energetic disorder. Through extensive device optimization, the SWIR‐OPD based on PDCBT‐DTO2F exhibited J d as low as 15.6 nA cm – 2 under −2 V and 58.1 nA cm −2 even under −5 V. Consequently, a detectivity of 1.04 × 10 12 Jones was realized at 1100 nm under −2 V bias, ranking among the best performance for SWIR‐OPDs operating under reverse bias.
- 30 June 2026
- Published by Wiley in Advanced Materials
- Vol. 38 (43) , e73895
Short‐Wave Infrared Organic Photodetectors With Ultralow Dark Current Density Under Biased Operating Conditions
Commercial photodetectors integrated on readout circuits typically operate under bias voltage, necessitating low dark current density ( J d ) to achieve high detectivity. However, suppressing J d remains a critical challenge for organic photodetectors (OPDs), particularly those operating in the short‐wave infrared (SWIR) region. Herein, we report SWIR‐OPDs that achieve ultralow J d under high bias voltage by developing a narrow bandgap p‐type polymer as the SWIR absorber, thereby establishing an alternative material platform for high‐performance SWIR‐OPDs. The new polymer PDCBT‐DTO2F adopts a push‐pull architecture comprising quaterthiophene donor units and 5,6‐dicyano‐2,1,3‐benzothiadiazole acceptor moieties. Substituting the alkyl chains on quaterthiophene units with alkoxy chains significantly enhanced the intramolecular charge transfer effect and backbone coplanarity. This modification simultaneously yielded intense SWIR absorption, high crystallinity, reduced trap density, and low energetic disorder. Through extensive device optimization, the SWIR‐OPD based on PDCBT‐DTO2F exhibited J d as low as 15.6 nA cm – 2 under −2 V and 58.1 nA cm −2 even under −5 V. Consequently, a detectivity of 1.04 × 10 12 Jones was realized at 1100 nm under −2 V bias, ranking among the best performance for SWIR‐OPDs operating under reverse bias.
- Open Access
- 15 June 2026
- Published by Wiley in Interdisciplinary Materials
Curing Perovskite Photovoltaics With Organic Functional Molecules: Progress, Mechanism, and Prospect
Perovskite solar cells (PSCs) are recognized as the most promising next‐generation photovoltaic technology, whose performance is critically dependent on the quality of the perovskite light‐absorber and synergistic effects among the functional layers. To control and optimize the film quality of PSCs, additives with organic functional groups, especially medicinally derived molecules, have attracted significant attention in recent years due to distinctive advantages, particularly the precision‐targeted design of functional groups, which allows function‐oriented molecular structure screening and modification. Moreover, beyond the perovskite layer, organic functional molecules also play important roles by multiple effects within the carrier transport layers, encapsulation layer, and at the electrode interfaces. This paper details the application of medicinally derived organic functional molecules across different functional layers of PSCs, elucidating their working mechanisms from aspects such as defect passivation, energy level alignment, crystallization regulation, and inhibiting ion migration. Attributed to the diverse functional groups and versatile molecular geometries, these molecules confer the ability to interact with each functional layer at multiple sites through various effects, facilitating multifunctional modification. Notably, with the advantages of mature manufacturing, well‐established structure‐function relationship, extensive database, low toxicity, and biodegradability, the prospects and challenges of interdisciplinary integration of medicinally derived molecules and PSCs are highlighted. Finally, AI‐assisted structure‐function design and prediction, as well as high‐throughput screening system, will also promote a bright future at the interdisciplinary frontier of medicinal chemistry and perovskite photovoltaics.
- 15 June 2026
- Published by Wiley in Interdisciplinary Materials
Open AccessCuring Perovskite Photovoltaics With Organic Functional Molecules: Progress, Mechanism, and Prospect
Perovskite solar cells (PSCs) are recognized as the most promising next‐generation photovoltaic technology, whose performance is critically dependent on the quality of the perovskite light‐absorber and synergistic effects among the functional layers. To control and optimize the film quality of PSCs, additives with organic functional groups, especially medicinally derived molecules, have attracted significant attention in recent years due to distinctive advantages, particularly the precision‐targeted design of functional groups, which allows function‐oriented molecular structure screening and modification. Moreover, beyond the perovskite layer, organic functional molecules also play important roles by multiple effects within the carrier transport layers, encapsulation layer, and at the electrode interfaces. This paper details the application of medicinally derived organic functional molecules across different functional layers of PSCs, elucidating their working mechanisms from aspects such as defect passivation, energy level alignment, crystallization regulation, and inhibiting ion migration. Attributed to the diverse functional groups and versatile molecular geometries, these molecules confer the ability to interact with each functional layer at multiple sites through various effects, facilitating multifunctional modification. Notably, with the advantages of mature manufacturing, well‐established structure‐function relationship, extensive database, low toxicity, and biodegradability, the prospects and challenges of interdisciplinary integration of medicinally derived molecules and PSCs are highlighted. Finally, AI‐assisted structure‐function design and prediction, as well as high‐throughput screening system, will also promote a bright future at the interdisciplinary frontier of medicinal chemistry and perovskite photovoltaics.
- Open Access
- 6 April 2026
- Published by Springer Nature in Nature Communications
- Vol. 17 (1)
Solution epitaxy of single-crystal ferroelectric p-i-n structure with ultrahigh photovoltaic response
Ferroelectric materials with a switchable polarization are appealing for optoelectronic applications because of their above-bandgap photovoltage with a potential to exceed the Shockley-Queisser limit efficiency within classic p-n junctions. However, the intrinsic photovoltaic current in ferroelectrics remains far below the junction ones by orders, hindering their practical applications. Here we report an extremely large photovoltaic current density of 130 mA cm−2 with a photovoltage of 1.31 V under 375 nm light illumination in single-domain lead titanate films. Its photoresponsivity surpasses all available ferroelectric materials by two orders of magnitude. Systematic investigations reveal that an interfacial Ta dopant layer during solution epitaxy drives a polarization converting of the film via the flexoelectric effect, where surface charged Pb vacancy layer was generated for polarization screening. These two layers produce a p-i-n structure throughout the film, accounting for the ultrahigh photovoltaic response. Furthermore, a self-powered X-ray detector made of such film was explored to achieve a sensitivity of 4.73 C Gyair−1 cm−3, three orders of magnitude higher than that of commercial amorphous Se detectors. Our findings may pave the way for exploring novel detection and imaging devices based on ferroelectric materials.
- 6 April 2026
- Published by Springer Nature in Nature Communications
- Vol. 17 (1)
Open AccessSolution epitaxy of single-crystal ferroelectric p-i-n structure with ultrahigh photovoltaic response
Ferroelectric materials with a switchable polarization are appealing for optoelectronic applications because of their above-bandgap photovoltage with a potential to exceed the Shockley-Queisser limit efficiency within classic p-n junctions. However, the intrinsic photovoltaic current in ferroelectrics remains far below the junction ones by orders, hindering their practical applications. Here we report an extremely large photovoltaic current density of 130 mA cm−2 with a photovoltage of 1.31 V under 375 nm light illumination in single-domain lead titanate films. Its photoresponsivity surpasses all available ferroelectric materials by two orders of magnitude. Systematic investigations reveal that an interfacial Ta dopant layer during solution epitaxy drives a polarization converting of the film via the flexoelectric effect, where surface charged Pb vacancy layer was generated for polarization screening. These two layers produce a p-i-n structure throughout the film, accounting for the ultrahigh photovoltaic response. Furthermore, a self-powered X-ray detector made of such film was explored to achieve a sensitivity of 4.73 C Gyair−1 cm−3, three orders of magnitude higher than that of commercial amorphous Se detectors. Our findings may pave the way for exploring novel detection and imaging devices based on ferroelectric materials.
- 1 September 2025
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
Efficient Wavelength-Selective Self-Powered Organic Photodetectors Based on Electron Acceptors Diluted by Transparent Polymer Donors
Organic photodetectors (OPDs) have great potential in optical communication and biomedical imaging. Wavelength-selective response can be achieved by employing filter-free OPDs with various organic semiconductors. Herein, solution-processed OPDs are fabricated with typical electron acceptors (i.e., PC60BM, ITCC, IT4F, BTP-S2, Y6, and IEICO4F) diluted by transparent polymer donor PTAA. The optical profiles of acceptors drive tunable wavelength detection covering ultraviolet (UV), visible (VIS), to near-infrared (NIR) regions. Compared to a silicon photodetector with nearly uniform photoresponse across wavelengths, fine-tuning the composition of OPDs enables wavelength-selective detection in the UV, VIS, and NIR bands, with higher response than that in out-of-band wavelengths. All the detectors realize specific detectivity over 1011 Jones (based on noise current), fast photoresponse time (<10 μs), and linear photocurrent response around 110 dB at zero bias. Additionally, transient absorption spectroscopy confirms efficient charge generation in PTAA:acceptor blends, which is significantly enhanced by the addition of 1,8-diiodooctane. Besides, the mixed molecular orientations induce spontaneous energetic offsets in the neat acceptor phase, further facilitating charge generation. Therefore, our work demonstrates a universal strategy to realize efficient wavelength-selective self-powered OPDs without optical filters.
- 1 September 2025
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
Efficient Wavelength-Selective Self-Powered Organic Photodetectors Based on Electron Acceptors Diluted by Transparent Polymer Donors
Organic photodetectors (OPDs) have great potential in optical communication and biomedical imaging. Wavelength-selective response can be achieved by employing filter-free OPDs with various organic semiconductors. Herein, solution-processed OPDs are fabricated with typical electron acceptors (i.e., PC60BM, ITCC, IT4F, BTP-S2, Y6, and IEICO4F) diluted by transparent polymer donor PTAA. The optical profiles of acceptors drive tunable wavelength detection covering ultraviolet (UV), visible (VIS), to near-infrared (NIR) regions. Compared to a silicon photodetector with nearly uniform photoresponse across wavelengths, fine-tuning the composition of OPDs enables wavelength-selective detection in the UV, VIS, and NIR bands, with higher response than that in out-of-band wavelengths. All the detectors realize specific detectivity over 1011 Jones (based on noise current), fast photoresponse time (<10 μs), and linear photocurrent response around 110 dB at zero bias. Additionally, transient absorption spectroscopy confirms efficient charge generation in PTAA:acceptor blends, which is significantly enhanced by the addition of 1,8-diiodooctane. Besides, the mixed molecular orientations induce spontaneous energetic offsets in the neat acceptor phase, further facilitating charge generation. Therefore, our work demonstrates a universal strategy to realize efficient wavelength-selective self-powered OPDs without optical filters.
- 14 May 2025
- Published by Wiley in Physica Status Solidi (RRL) – Rapid Research Letters
- Vol. 19 (9)
Suppression of Defect Formation in CsPbBr 3 Nanocrystals via Stoichiometry Regulation for Sensitive and Stable Nanocomposite X–Ray Detectors
Perovskite nanocrystals (PNCs) have emerged as promising candidates for X‐ray detection due to their large X‐ray stopping power and their presynthesized crystalline nature, which enables high‐quality thick‐film deposition via a scalable spray coating process. However, the inherent high defect density at the surface of PNCs significantly hampers the charge collection efficiency and overall stability of X‐ray detectors. In this study, the Cs/Pb precursor ratio is identified as a critical factor in mitigating defect formation in CsPbBr 3 PNCs. By introducing a moderate Cs‐deficient stoichiometry, both defect density and self‐doping within the PNCs are effectively reduced. Additionally, PNCs are incorporated into organic bulk‐heterojunctions to fabricate nanocomposite X‐ray detectors, showing that this stoichiometry regulation not only enhances the detectors’ sensitivity but also decreases the dark current and significantly improves their environmental stability. These advancements hold substantial potential for high‐performance flat‐panel X‐ray imaging applications in the future.
- 14 May 2025
- Published by Wiley in Physica Status Solidi (RRL) – Rapid Research Letters
- Vol. 19 (9)
Suppression of Defect Formation in CsPbBr 3 Nanocrystals via Stoichiometry Regulation for Sensitive and Stable Nanocomposite X–Ray Detectors
Perovskite nanocrystals (PNCs) have emerged as promising candidates for X‐ray detection due to their large X‐ray stopping power and their presynthesized crystalline nature, which enables high‐quality thick‐film deposition via a scalable spray coating process. However, the inherent high defect density at the surface of PNCs significantly hampers the charge collection efficiency and overall stability of X‐ray detectors. In this study, the Cs/Pb precursor ratio is identified as a critical factor in mitigating defect formation in CsPbBr 3 PNCs. By introducing a moderate Cs‐deficient stoichiometry, both defect density and self‐doping within the PNCs are effectively reduced. Additionally, PNCs are incorporated into organic bulk‐heterojunctions to fabricate nanocomposite X‐ray detectors, showing that this stoichiometry regulation not only enhances the detectors’ sensitivity but also decreases the dark current and significantly improves their environmental stability. These advancements hold substantial potential for high‐performance flat‐panel X‐ray imaging applications in the future.