Iryna Zasornova
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Iryna Zasornova has a total of 33 co-authors. Here are the top co-authors by number of shared publications:
Khmelnytskyi National University
5 shared publicationsVolodymyr Dahl East Ukrainian National University
5 shared publications- Galyna Ripka
Ukrainian Scientific Research Institute of Medicine of Transport, Odesa, Ukraine
4 shared publications - Tetiana Hovorushchenko
Khmelnytskyi National University, Khmelnytskyi
4 shared publications - Alexander Zasornov3 shared publications
- Artem Boyarchuk
Tallinn University of Technology
3 shared publications
Latest Publications
- Open Access
- 29 May 2026
- Published by Kyiv National University of Culture and Arts in Digital Platform: Information Technologies in Sociocultural Sphere
- Vol. 9 (1) , 149-164
Substantiation of the Selection of Tools for Various Areas of Graphic and Digital Design Based on a Comprehensive Comparative Analysis of Software
The purpose of this research is to ground the selection of tools for contemporary graphic and digital design based on a comprehensive comparative analysis of technical, functional and operational-practical characteristics of market-dominant software tools of various specialisations. The study aims to determine their production suitability, level of integration into professional design workflows, and the appropriateness of their use for raster and vector graphics, prepress preparation and layout, UI/UX design, 3D modelling, motion graphics and compositing. Research methodology. The structured methodological approach of this study incorporates a structural-functional analysis, a comparative (comparativist) approach, a content analysis of official technical documentation of the software tools. The software is systematised according to functional classification criteria, as well as according to the support of professional colour-management standards, the availability of AI-based features, cloud services and inter-software integrations. To ensure the objectivity of comparisons, standardised feature tables ae used, structured into technical and practical blocks. Based on key parameters, two integral indices are offered: the Production Index and the Connectedness Index, which enable generalised cross-class comparison of software tools. The scientific novelty lies in the development of a structured methodological approach for analyzing and substantiating the selection of tools in graphic and digital design, which integrates the technical, functional and integration characteristics of software tools into a unified comparison system. This research offers structured tables of technical and practical parameters, as well as two integral indices – the Production Index and the Connectedness Index – that enable cross-class comparison of tools with different specialisations. This approach creates a scientifically grounded basis for further research in digital design and for the evaluation of professional software tools. Conclusions. As a result of the study, a universal toolkit for the substantiated selection of software tools is formed according to the specificity of professional tasks in graphic and digital design. The proposed structured methodological approach enables designers to improve the decision-making process regarding software selection for various domains of graphic and digital design. The research findings can serve as an analytical foundation for updating professional standards, improving design workflows within the creative industries and formulating requirements for software tools in production environments. The obtained results are implemented into the educational process of training students in the academic programmes B2 “Design. Graphic Design” and B2 “Graphic Design and Fashion Industry”.
- 29 May 2026
- Published by Kyiv National University of Culture and Arts in Digital Platform: Information Technologies in Sociocultural Sphere
- Vol. 9 (1) , 149-164
Open AccessSubstantiation of the Selection of Tools for Various Areas of Graphic and Digital Design Based on a Comprehensive Comparative Analysis of Software
The purpose of this research is to ground the selection of tools for contemporary graphic and digital design based on a comprehensive comparative analysis of technical, functional and operational-practical characteristics of market-dominant software tools of various specialisations. The study aims to determine their production suitability, level of integration into professional design workflows, and the appropriateness of their use for raster and vector graphics, prepress preparation and layout, UI/UX design, 3D modelling, motion graphics and compositing. Research methodology. The structured methodological approach of this study incorporates a structural-functional analysis, a comparative (comparativist) approach, a content analysis of official technical documentation of the software tools. The software is systematised according to functional classification criteria, as well as according to the support of professional colour-management standards, the availability of AI-based features, cloud services and inter-software integrations. To ensure the objectivity of comparisons, standardised feature tables ae used, structured into technical and practical blocks. Based on key parameters, two integral indices are offered: the Production Index and the Connectedness Index, which enable generalised cross-class comparison of software tools. The scientific novelty lies in the development of a structured methodological approach for analyzing and substantiating the selection of tools in graphic and digital design, which integrates the technical, functional and integration characteristics of software tools into a unified comparison system. This research offers structured tables of technical and practical parameters, as well as two integral indices – the Production Index and the Connectedness Index – that enable cross-class comparison of tools with different specialisations. This approach creates a scientifically grounded basis for further research in digital design and for the evaluation of professional software tools. Conclusions. As a result of the study, a universal toolkit for the substantiated selection of software tools is formed according to the specificity of professional tasks in graphic and digital design. The proposed structured methodological approach enables designers to improve the decision-making process regarding software selection for various domains of graphic and digital design. The research findings can serve as an analytical foundation for updating professional standards, improving design workflows within the creative industries and formulating requirements for software tools in production environments. The obtained results are implemented into the educational process of training students in the academic programmes B2 “Design. Graphic Design” and B2 “Graphic Design and Fashion Industry”.
- Open Access
- 24 April 2026
- Published by Publishing House Helvetica (Publications) in Theory and practice of design
- No. 1 (39),p. 257-265
DESIGNING A DEPARTMENT LOGO BASED ON THE TYPOLOGICAL ANALYSIS OF HIGHER EDUCATION INSTITUTION LOGOS
Мета дослідження полягає у проведенні типологічного аналізу логотипів закладів вищої освіти (ЗВО), як елементів візуальної ідентичності, узагальненні характерних візуально-графічних рішень і кількісних закономірностей їх використання, а також у науково обґрунтованому проєктуванні логотипу кафедри дизайну та індустрії моди Східноукраїнського національного університету імені Володимира Даля. Методологія. Для досягнення поставленої мети застосовано візуально-аналітичний метод, порівняльно-типологічний аналіз та елементи контент-аналізу. Об’’єктом дослідження стала вибірка із 100 логотипів українських і європейських ЗВО. Аналіз виконано за структурним поділом логотипів (текстові, символьні, комбіновані), а також за такими критеріями: читабельність, композиційна цілісність, рівень деталізації, масштабованість, адаптивність до цифрових форматів, відтворюваність у кольорі і монохромному варіанті. Результати. У результаті проведеного типологічного аналізу 100 логотипів закладів вищої освіти встановлено кількісний розподіл видів: 44% – текстові, 40% – комбіновані, 16% – символьні. Домінування текстових і комбінованих логотипів свідчить про їхню поширеність у формуванні візуальної ідентичності. Результати узагальнено та візуалізовано у вигляді діаграми й прикладів логотипів за видами. На основі отриманих даних виконано проєктування логотипу кафедри дизайну та індустрії моди Східноукраїнського національного університету імені Володимира Даля. У проєкті використано шрифт Exotc350 Bd BT та кольорову палітру #EF7F1A і #1A87F0. Адаптивність логотипу забезпечено можливістю використання в цифрових середовищах і поліграфічній продукції, уу кольоровому та монохромному варіантах. Наукова новизна.. Наукова новизна дослідження полягає у виконанні порівняльного типологічного аналізу логотипів українських та європейських ЗВО із визначенням кількісного співвідношення текстових, символьних і комбінованих видів, а також у застосуванні отриманих результатів для проєктування логотипу кафедри дизайну та індустрії моди Східноукраїнського національного університету імені Володимира Даля з урахуванням вимог цифрової адаптивності. Практична значущість. Отримані результати можуть використовуватись для проєктування та модернізації логотипів ЗВО та їхніх підрозділів, а також для формування методичних рекомендацій щодо застосування айдентики в цифровому середовищі (соціальні мережі, офіційні вебсторінки, презентаційні матеріали, тощо) і поліграфічній продукції. Запропонований підхід може бути інтегрований у навчальний процес підготовки здобувачів вищої освіти за освітніми програмами В2 «Дизайн. Графічний дизайн», В2 «Графічний дизайн і фешн-індустрія», а також використаний у практичній діяльності дизайнерів
- 24 April 2026
- Published by Publishing House Helvetica (Publications) in Theory and practice of design
- No. 1 (39),p. 257-265
Open AccessDESIGNING A DEPARTMENT LOGO BASED ON THE TYPOLOGICAL ANALYSIS OF HIGHER EDUCATION INSTITUTION LOGOS
Мета дослідження полягає у проведенні типологічного аналізу логотипів закладів вищої освіти (ЗВО), як елементів візуальної ідентичності, узагальненні характерних візуально-графічних рішень і кількісних закономірностей їх використання, а також у науково обґрунтованому проєктуванні логотипу кафедри дизайну та індустрії моди Східноукраїнського національного університету імені Володимира Даля. Методологія. Для досягнення поставленої мети застосовано візуально-аналітичний метод, порівняльно-типологічний аналіз та елементи контент-аналізу. Об’’єктом дослідження стала вибірка із 100 логотипів українських і європейських ЗВО. Аналіз виконано за структурним поділом логотипів (текстові, символьні, комбіновані), а також за такими критеріями: читабельність, композиційна цілісність, рівень деталізації, масштабованість, адаптивність до цифрових форматів, відтворюваність у кольорі і монохромному варіанті. Результати. У результаті проведеного типологічного аналізу 100 логотипів закладів вищої освіти встановлено кількісний розподіл видів: 44% – текстові, 40% – комбіновані, 16% – символьні. Домінування текстових і комбінованих логотипів свідчить про їхню поширеність у формуванні візуальної ідентичності. Результати узагальнено та візуалізовано у вигляді діаграми й прикладів логотипів за видами. На основі отриманих даних виконано проєктування логотипу кафедри дизайну та індустрії моди Східноукраїнського національного університету імені Володимира Даля. У проєкті використано шрифт Exotc350 Bd BT та кольорову палітру #EF7F1A і #1A87F0. Адаптивність логотипу забезпечено можливістю використання в цифрових середовищах і поліграфічній продукції, уу кольоровому та монохромному варіантах. Наукова новизна.. Наукова новизна дослідження полягає у виконанні порівняльного типологічного аналізу логотипів українських та європейських ЗВО із визначенням кількісного співвідношення текстових, символьних і комбінованих видів, а також у застосуванні отриманих результатів для проєктування логотипу кафедри дизайну та індустрії моди Східноукраїнського національного університету імені Володимира Даля з урахуванням вимог цифрової адаптивності. Практична значущість. Отримані результати можуть використовуватись для проєктування та модернізації логотипів ЗВО та їхніх підрозділів, а також для формування методичних рекомендацій щодо застосування айдентики в цифровому середовищі (соціальні мережі, офіційні вебсторінки, презентаційні матеріали, тощо) і поліграфічній продукції. Запропонований підхід може бути інтегрований у навчальний процес підготовки здобувачів вищої освіти за освітніми програмами В2 «Дизайн. Графічний дизайн», В2 «Графічний дизайн і фешн-індустрія», а також використаний у практичній діяльності дизайнерів
- Open Access
- 29 June 2025
- Published by Institute for Digitalisation of Education of the National Academy of Educational Sciences of Ukraine in Information Technologies and Learning Tools
- Vol. 107 (3) , 222-238
DEVELOPMENT AND IMPLEMENTATION OF THE WEB-BASED INFORMATION SYSTEM "COMMON INFORMATION SPACE FOR VIRTUAL EXCHANGE PROGRAMS"
The increasing importance of online learning, blended learning, and virtual exchange programs in contemporary education necessitates the development of robust digital platforms. Virtual exchange programs are online platforms that help students from different countries connect and learn together. They allow students to communicate, share cultures, and develop important skills. These programs give everyone a chance to receive quality education, no matter where they live or what their background is. They also help students gain international experience, improve their professional skills, and prepare for future jobs. By doing so, virtual exchange programs support the labor market with well-trained specialists who meet high European standards. This paper presents design and implementation of a web-based information system titled "Common Information Space for Virtual Exchange Programs". This system aims to facilitate seamless virtual exchange programs by providing a comprehensive platform for collaboration, communication, and resource sharing among students and educators globally. By integrating online and blended learning methodologies, the system ensures that high-quality educational resources are accessible to students irrespective of their geographical location, fostering an inclusive and diverse learning environment. The blended learning approach allows for greater flexibility and personalization, catering to varied learning styles and needs. Moreover, virtual exchange programs promoted through this platform enhance cross-cultural understanding and global awareness, equipping students with the skills necessary for a globally interconnected world. The "Common Information Space for Virtual Exchange Programs" leverages these educational strategies to create an engaging and interactive learning ecosystem. It supports real-time communication and collaboration, significantly improving student engagement and participation. This, in turn, leads to more effective and meaningful learning outcomes.
- 29 June 2025
- Published by Institute for Digitalisation of Education of the National Academy of Educational Sciences of Ukraine in Information Technologies and Learning Tools
- Vol. 107 (3) , 222-238
Open AccessDEVELOPMENT AND IMPLEMENTATION OF THE WEB-BASED INFORMATION SYSTEM "COMMON INFORMATION SPACE FOR VIRTUAL EXCHANGE PROGRAMS"
The increasing importance of online learning, blended learning, and virtual exchange programs in contemporary education necessitates the development of robust digital platforms. Virtual exchange programs are online platforms that help students from different countries connect and learn together. They allow students to communicate, share cultures, and develop important skills. These programs give everyone a chance to receive quality education, no matter where they live or what their background is. They also help students gain international experience, improve their professional skills, and prepare for future jobs. By doing so, virtual exchange programs support the labor market with well-trained specialists who meet high European standards. This paper presents design and implementation of a web-based information system titled "Common Information Space for Virtual Exchange Programs". This system aims to facilitate seamless virtual exchange programs by providing a comprehensive platform for collaboration, communication, and resource sharing among students and educators globally. By integrating online and blended learning methodologies, the system ensures that high-quality educational resources are accessible to students irrespective of their geographical location, fostering an inclusive and diverse learning environment. The blended learning approach allows for greater flexibility and personalization, catering to varied learning styles and needs. Moreover, virtual exchange programs promoted through this platform enhance cross-cultural understanding and global awareness, equipping students with the skills necessary for a globally interconnected world. The "Common Information Space for Virtual Exchange Programs" leverages these educational strategies to create an engaging and interactive learning ecosystem. It supports real-time communication and collaboration, significantly improving student engagement and participation. This, in turn, leads to more effective and meaningful learning outcomes.
- Open Access
- 26 September 2024
- Published by Khmelnytskyi National University in Computer Systems and Information Technologies
- No. 3,p. 51-57
OVERVIEW OF THE METHODS AND TOOLS FOR ENVIRONMENTAL COMPONENTS MONITORING
Monitoring of environmental components is an important process for determining the level of pollution and tracking changes in the environment, and plays a key role in ensuring the health and comfort of residents, as well as in preserving the environment. Continuous monitoring of environmental components is key to ensuring human health, protecting nature and reducing the negative impact on the climate and ecosystems, as well as achieving sustainable development. In order to combat environmental pollution, it is necessary to implement effective measures to limit emissions of harmful substances, use environmentally friendly technologies and green solutions in all sectors of the economy, and raise public awareness of the problem of environmental pollution. From the analysis of the sources reviewed, a pattern was identified that the information technologies mainly used to monitor environmental components are either Internet of Things (IoT) technologies using modern sensors and data transmission components or artificial intelligence technologies such as computer vision. Less commonly, the use of robots, UAVs, and digital twins is being traced. Based on a critical analysis of methods and tools for environmental components monitoring, there is a need to develop such methods and tools for environmental components monitoring that would: perform cheaper and more versatile environmental components monitoring than existing analogues, but at the same time have no less accuracy and speed; monitor the state of the environment; identify sources of environmental pollution; warn of environmental disasters; assess the state of natural resources; support environmental decision-making; collect and analyze various environmental indicators in real time; assessed the level of quality and safety of environmental components, which will allow immediate response to quality changes and promptly take the necessary measures, etc., which will be the focus of the authors' further efforts.
- 26 September 2024
- Published by Khmelnytskyi National University in Computer Systems and Information Technologies
- No. 3,p. 51-57
Open AccessOVERVIEW OF THE METHODS AND TOOLS FOR ENVIRONMENTAL COMPONENTS MONITORING
Monitoring of environmental components is an important process for determining the level of pollution and tracking changes in the environment, and plays a key role in ensuring the health and comfort of residents, as well as in preserving the environment. Continuous monitoring of environmental components is key to ensuring human health, protecting nature and reducing the negative impact on the climate and ecosystems, as well as achieving sustainable development. In order to combat environmental pollution, it is necessary to implement effective measures to limit emissions of harmful substances, use environmentally friendly technologies and green solutions in all sectors of the economy, and raise public awareness of the problem of environmental pollution. From the analysis of the sources reviewed, a pattern was identified that the information technologies mainly used to monitor environmental components are either Internet of Things (IoT) technologies using modern sensors and data transmission components or artificial intelligence technologies such as computer vision. Less commonly, the use of robots, UAVs, and digital twins is being traced. Based on a critical analysis of methods and tools for environmental components monitoring, there is a need to develop such methods and tools for environmental components monitoring that would: perform cheaper and more versatile environmental components monitoring than existing analogues, but at the same time have no less accuracy and speed; monitor the state of the environment; identify sources of environmental pollution; warn of environmental disasters; assess the state of natural resources; support environmental decision-making; collect and analyze various environmental indicators in real time; assessed the level of quality and safety of environmental components, which will allow immediate response to quality changes and promptly take the necessary measures, etc., which will be the focus of the authors' further efforts.
- 27 June 2024
- Published by Khmelnytskyi National University in Computer Systems and Information Technologies
- No. 2,p. 53-58
OPTIMIZATION OF CYBER-PHYSICAL SYSTEM PARAMETERS BASED ON INTELLIGENT IOT SENSORS DATA
The optimization of cyber-physical systems (CPS) parameters is researched with focusing on the integration of computation, networking, and physical processes with the Internet of Things (IoT). The use of intelligent IoT sensors is crucial for collecting real-time data, which is necessary for enhancing the efficiency, reliability, and performance of CPS. Various methods of CPS parameters optimization are analyzed and categorized into model-based approaches, data-driven approaches, and hybrid approaches. The model-based approaches rely on mathematical models to describe CPS behavior and use optimization algorithms like linear programming and evolutionary algorithms to predict system responses and optimize parameters. But, the limitations of model-based approaches are related to complex systems with uncertain or dynamic behavior. The data-driven approaches are more suitable for complex cyber-physical systems. These approaches utilize machine learning and data analytics techniques to extract patterns from sensor data, which are then used to adjust system parameters. The hybrid approaches combine elements of both model-based and data-driven methods. The method of cyber-physical system parameters optimization based on intelligent IoT sensors data processing is developed with using of distributed neural network. The optimization problem is formulated with constraints for the system parameters. The neural network mathematical model and learning algorithm are proposed. The performed research shows the importance of developing optimization methods for CPS parameters based on intelligent IoT sensor data, considering the evolving nature of IoT technology. The integrating intelligent sensors into CPS offers new opportunities for optimizing system performance but also presents challenges in data management and security that should be addressed in future.
- 27 June 2024
- Published by Khmelnytskyi National University in Computer Systems and Information Technologies
- No. 2,p. 53-58
OPTIMIZATION OF CYBER-PHYSICAL SYSTEM PARAMETERS BASED ON INTELLIGENT IOT SENSORS DATA
The optimization of cyber-physical systems (CPS) parameters is researched with focusing on the integration of computation, networking, and physical processes with the Internet of Things (IoT). The use of intelligent IoT sensors is crucial for collecting real-time data, which is necessary for enhancing the efficiency, reliability, and performance of CPS. Various methods of CPS parameters optimization are analyzed and categorized into model-based approaches, data-driven approaches, and hybrid approaches. The model-based approaches rely on mathematical models to describe CPS behavior and use optimization algorithms like linear programming and evolutionary algorithms to predict system responses and optimize parameters. But, the limitations of model-based approaches are related to complex systems with uncertain or dynamic behavior. The data-driven approaches are more suitable for complex cyber-physical systems. These approaches utilize machine learning and data analytics techniques to extract patterns from sensor data, which are then used to adjust system parameters. The hybrid approaches combine elements of both model-based and data-driven methods. The method of cyber-physical system parameters optimization based on intelligent IoT sensors data processing is developed with using of distributed neural network. The optimization problem is formulated with constraints for the system parameters. The neural network mathematical model and learning algorithm are proposed. The performed research shows the importance of developing optimization methods for CPS parameters based on intelligent IoT sensor data, considering the evolving nature of IoT technology. The integrating intelligent sensors into CPS offers new opportunities for optimizing system performance but also presents challenges in data management and security that should be addressed in future.
- 3 May 2024
- Published by Academy of Cognitive and Natural Sciences
- p. 208-222
The Concept of Information Technology for Ensuring Accessibility to Art Objects for the Visually Impaired Persons
The current challenge is to ensure accessibility to art objects for the visually impaired persons by developing information technology, that provides converting 2D images into 3D models and generating descriptions for them in Braille. The brain of a blind person is able to convert tactile information into visual images, so tactile paintings created using 3D modeling and 3D printing technologies will allow blind people to "see" artistic masterpieces with their fingertips. The variable height of volumetric elements when creating tactile graphics for blind people can effectively and intuitively transmit various types of information, so when developing information technology for ensuring accessibility to art objects for the visually impaired persons, an important and urgent task is to recognize a 2D image and its 3D modeling (building up the relief to obtain an image of a three- dimensional object, as well as a mathematical model that describes the structure of the object, the location of its points in space, and a mathematical description of the object's surfaces). The analysis of the known methods and tools for 2D image recognition and their 3D modeling has shown that the methods and tools for rendering art objects (paintings) in 3D models are currently underdeveloped. The proposed information technology for ensuring accessibility to art objects for the visually impaired persons automates (in order to simplify the implementation) the transformation of a 2D picture into its 3D model, ready for printing on a 3D printer, and also generates a description of the picture in Braille, ready for printing on a typhloprinter.
- 3 May 2024
- Published by Academy of Cognitive and Natural Sciences
- p. 208-222
The Concept of Information Technology for Ensuring Accessibility to Art Objects for the Visually Impaired Persons
The current challenge is to ensure accessibility to art objects for the visually impaired persons by developing information technology, that provides converting 2D images into 3D models and generating descriptions for them in Braille. The brain of a blind person is able to convert tactile information into visual images, so tactile paintings created using 3D modeling and 3D printing technologies will allow blind people to "see" artistic masterpieces with their fingertips. The variable height of volumetric elements when creating tactile graphics for blind people can effectively and intuitively transmit various types of information, so when developing information technology for ensuring accessibility to art objects for the visually impaired persons, an important and urgent task is to recognize a 2D image and its 3D modeling (building up the relief to obtain an image of a three- dimensional object, as well as a mathematical model that describes the structure of the object, the location of its points in space, and a mathematical description of the object's surfaces). The analysis of the known methods and tools for 2D image recognition and their 3D modeling has shown that the methods and tools for rendering art objects (paintings) in 3D models are currently underdeveloped. The proposed information technology for ensuring accessibility to art objects for the visually impaired persons automates (in order to simplify the implementation) the transformation of a 2D picture into its 3D model, ready for printing on a 3D printer, and also generates a description of the picture in Braille, ready for printing on a typhloprinter.
- Open Access
- 29 September 2023
- Published by Khmelnytskyi National University in Computer Systems and Information Technologies
- No. 3,p. 92-96
AUTOMATED TESTING OF WEB PROJECT FUNCTIONALITY WITH USING OF ERROR PROPAGATION ANALYSIS
Автоматизоване тестування є незамінним у сфері розробки програмного забезпечення, особливо для функціональності веб-проєктів, оскільки складність програмних систем продовжує зростати. У цій статті розглядається ключова роль автоматизованого тестування та те, як інтеграція аналізу поширення помилок, заснованого на теорії хаосу, може підвищити його ефективність. Мета полягає в тому, щоб з’ясувати значення цієї методології та її застосування для підвищення надійності та продуктивності веб-проєктів. Автоматизоване тестування автоматизує виконання попередньо визначених тестів, пропонуючи підвищення ефективності, зменшення людських помилок і швидке виявлення дефектів у розробці програмного забезпечення. Різні підходи до тестування, включаючи модульне тестування, інтеграційне тестування та регресійне тестування, задовольняють різні аспекти функціональності програмного забезпечення, забезпечуючи безперебійну роботу всіх компонентів. Функціональні можливості веб-проєкту є невід’ємною частиною взаємодії з користувачем, охоплюючи навігаційні меню, форми та функції пошуку. Тестування цієї функції є обов’язковим, щоб виявити невідповідності або помилки, які можуть поставити під загрозу задоволення користувачів і виконання завдань. У статті пропонується методологія автоматизованого тестування в поєднанні з аналізом розповсюдження помилок, що передбачає ретельний аналіз того, як помилки розвиваються в системі з часом. Теорія хаосу - це розділ математики, що вивчає поведінку складних систем, використовується для розуміння того, як незначні варіації початкових умов можуть спричинити значні зміни поведінки системи. Традиційний аналіз розповсюдження помилок базується на лінійних, детермінованих моделях, але реальні системи часто демонструють нелінійні, хаотичні характеристики, що робить такі моделі неадекватними. Нелінійна динаміка теорії хаосу моделює складну взаємодію між вхідними змінними та їхній вплив на результати, фіксуючи чутливість хаотичних систем до початкових умов. Цей підхід оцінює складність системи та заплутані цикли зворотного зв’язку, підвищуючи надійність і точність аналізу помилок. Однак застосування теорії хаосу створює складність і потребує обчислень, що вимагає балансу між складністю моделі та практичністю. Запропонована методологія розкриває цінну інформацію про розповсюдження помилок у функціональності веб-проєктів, визначаючи вразливі компоненти та області, які потребують вдосконалення. Переваги методології включають можливість виявлення потенційних проблем і вразливостей, що в кінцевому підсумку підвищує надійність веб-проєкту.
- 29 September 2023
- Published by Khmelnytskyi National University in Computer Systems and Information Technologies
- No. 3,p. 92-96
Open AccessAUTOMATED TESTING OF WEB PROJECT FUNCTIONALITY WITH USING OF ERROR PROPAGATION ANALYSIS
Автоматизоване тестування є незамінним у сфері розробки програмного забезпечення, особливо для функціональності веб-проєктів, оскільки складність програмних систем продовжує зростати. У цій статті розглядається ключова роль автоматизованого тестування та те, як інтеграція аналізу поширення помилок, заснованого на теорії хаосу, може підвищити його ефективність. Мета полягає в тому, щоб з’ясувати значення цієї методології та її застосування для підвищення надійності та продуктивності веб-проєктів. Автоматизоване тестування автоматизує виконання попередньо визначених тестів, пропонуючи підвищення ефективності, зменшення людських помилок і швидке виявлення дефектів у розробці програмного забезпечення. Різні підходи до тестування, включаючи модульне тестування, інтеграційне тестування та регресійне тестування, задовольняють різні аспекти функціональності програмного забезпечення, забезпечуючи безперебійну роботу всіх компонентів. Функціональні можливості веб-проєкту є невід’ємною частиною взаємодії з користувачем, охоплюючи навігаційні меню, форми та функції пошуку. Тестування цієї функції є обов’язковим, щоб виявити невідповідності або помилки, які можуть поставити під загрозу задоволення користувачів і виконання завдань. У статті пропонується методологія автоматизованого тестування в поєднанні з аналізом розповсюдження помилок, що передбачає ретельний аналіз того, як помилки розвиваються в системі з часом. Теорія хаосу - це розділ математики, що вивчає поведінку складних систем, використовується для розуміння того, як незначні варіації початкових умов можуть спричинити значні зміни поведінки системи. Традиційний аналіз розповсюдження помилок базується на лінійних, детермінованих моделях, але реальні системи часто демонструють нелінійні, хаотичні характеристики, що робить такі моделі неадекватними. Нелінійна динаміка теорії хаосу моделює складну взаємодію між вхідними змінними та їхній вплив на результати, фіксуючи чутливість хаотичних систем до початкових умов. Цей підхід оцінює складність системи та заплутані цикли зворотного зв’язку, підвищуючи надійність і точність аналізу помилок. Однак застосування теорії хаосу створює складність і потребує обчислень, що вимагає балансу між складністю моделі та практичністю. Запропонована методологія розкриває цінну інформацію про розповсюдження помилок у функціональності веб-проєктів, визначаючи вразливі компоненти та області, які потребують вдосконалення. Переваги методології включають можливість виявлення потенційних проблем і вразливостей, що в кінцевому підсумку підвищує надійність веб-проєкту.
- 14 April 2023
- Published by Academy of Cognitive and Natural Sciences
Theoretical and practical basics of creating a virtual microcontroller system of relay power supply of the heating element
Today, the issue of the economical use of energy sources is actual in the world, because of their significant price increase. Users should choose the heating method and system that is most effective in terms of safety, components costs, installation and commissioning, ergonomics, etc. Electric heating systems meet all these requirements. Despite the wide selection of modern heating elements, working with them is impossible without using a heating control system. All heating element systems are controlled by measuring the temperature of the coolant or the surface of the heating element. The high thermal inertia of the heating element makes it difficult to maintain the thermal regime. Knowing the main shortcomings of heating element control systems, it is proposed to create a virtual microcontroller system for the relay power supply of the heating element. This can be achieved by using a microcontroller for control, which will be able to evaluate the information and generate control pulses to turn on the DC source. This method of controlling the heating element will be carried out programmatically, without human intervention. For the development of a virtual microcontroller relay power system, theoretical foundations have been developed that take into account the capabilities of the experimental setup. To check the adequacy of the modeling, a comparison of the processes of heating (cooling) the heating element and charging (discharging) the capacitor was performed. A block diagram of the simulation program of two complete heating and cooling circulations has been developed. To check the operation of the virtual microcontroller system of the relay power supply of the heating element, the following was performed: simulation of two circulations of complete heating and cooling on an experimental installation; simulation of a gradual decrease in the temperature of the heater with three control pulses. Ways of further research are planned.
- 14 April 2023
- Published by Academy of Cognitive and Natural Sciences
Theoretical and practical basics of creating a virtual microcontroller system of relay power supply of the heating element
Today, the issue of the economical use of energy sources is actual in the world, because of their significant price increase. Users should choose the heating method and system that is most effective in terms of safety, components costs, installation and commissioning, ergonomics, etc. Electric heating systems meet all these requirements. Despite the wide selection of modern heating elements, working with them is impossible without using a heating control system. All heating element systems are controlled by measuring the temperature of the coolant or the surface of the heating element. The high thermal inertia of the heating element makes it difficult to maintain the thermal regime. Knowing the main shortcomings of heating element control systems, it is proposed to create a virtual microcontroller system for the relay power supply of the heating element. This can be achieved by using a microcontroller for control, which will be able to evaluate the information and generate control pulses to turn on the DC source. This method of controlling the heating element will be carried out programmatically, without human intervention. For the development of a virtual microcontroller relay power system, theoretical foundations have been developed that take into account the capabilities of the experimental setup. To check the adequacy of the modeling, a comparison of the processes of heating (cooling) the heating element and charging (discharging) the capacitor was performed. A block diagram of the simulation program of two complete heating and cooling circulations has been developed. To check the operation of the virtual microcontroller system of the relay power supply of the heating element, the following was performed: simulation of two circulations of complete heating and cooling on an experimental installation; simulation of a gradual decrease in the temperature of the heater with three control pulses. Ways of further research are planned.
- 14 April 2023
- Published by Academy of Cognitive and Natural Sciences
Mobile Information System for Determining the Level of Creatine in Food Products
The study of food products to determine the level of creatine in them is an actual task, taking into account the need for this substance for patients with Covid'19 and spinal muscular atrophy. The purpose of our research is to develop a mobile information system for determining the level of creatine in food products. The developed method for determining the level of creatine in food products by the user and the method for determining the level of creatine in food products using a mobile information system provide the user with the opportunity to quickly, conveniently, cheaply and effectively assess the presence and level of creatine in any food products, on the basis of which to build a rational diet from the point vision of body saturation with creatine. The proposed mobile information system for determining the level of creatine in food products provides convenience, low-cost, celerity, miniaturization and automation for measurement of concentration of creatine in any food products. The conclusion obtained from the system regarding the presence and level of creatine in this or that food product is useful and extremely important when preparing the diet of patients, especially patients with Covid'19 and/or spinal muscular atrophy. The proposed approach and mobile information system for determining the level of creatine in food products can be used not only for drawing up the diet of patients, especially patients with Covid'19 and/or spinal muscular atrophy, from the point vision of body saturation with creatine, but also for example, to check the quality of meat products.
- 14 April 2023
- Published by Academy of Cognitive and Natural Sciences
Mobile Information System for Determining the Level of Creatine in Food Products
The study of food products to determine the level of creatine in them is an actual task, taking into account the need for this substance for patients with Covid'19 and spinal muscular atrophy. The purpose of our research is to develop a mobile information system for determining the level of creatine in food products. The developed method for determining the level of creatine in food products by the user and the method for determining the level of creatine in food products using a mobile information system provide the user with the opportunity to quickly, conveniently, cheaply and effectively assess the presence and level of creatine in any food products, on the basis of which to build a rational diet from the point vision of body saturation with creatine. The proposed mobile information system for determining the level of creatine in food products provides convenience, low-cost, celerity, miniaturization and automation for measurement of concentration of creatine in any food products. The conclusion obtained from the system regarding the presence and level of creatine in this or that food product is useful and extremely important when preparing the diet of patients, especially patients with Covid'19 and/or spinal muscular atrophy. The proposed approach and mobile information system for determining the level of creatine in food products can be used not only for drawing up the diet of patients, especially patients with Covid'19 and/or spinal muscular atrophy, from the point vision of body saturation with creatine, but also for example, to check the quality of meat products.
- 23 February 2023
- Published by Khmelnytskyi National University in Herald of Khmelnytskyi National University. Technical sciences
- Vol. 317 (1)
ANALYTICAL REVIEW OF INFORMATION FOR TESTING THE OPEN PARAMETRIC SYSTEM OF AUTOMATED PROJECTION «VALENTINA»
The article analyzes proprietary systems, such as Lectra systems (France), Gerber Garment Technology (USA), Investronika (Spain), Assyst GmbH (Germany), Wild Ginger Software (USA) and open PatternViewer (USA), Valentina (Ukraine) automated design systems for sewing production. An analytical review of the information for testing the open parametric system of automated projection and design «Valentina» was performed. It was determined that the theoretical foundations of automated testing of automated design systems are currently an incompletely resolved problem. The minimum list of data for qualitative testing is presented, which contains 10 items, the main of which are: listings of source texts of software products, external specification, test plan and methods, test options and obtained results. The article provides a list of Internet sources of the «Valentina» software product distribution, a list of communication methods, as well as a list of external specification items required for testing the «Valentina» software product. Various versions of the «Valentina» were considered, as well as the changes made in the test version v0.7.52 compared to the previous version v0.7.51. Various types of errors that occur during the development of new functions of software products are analyzed, including the inability to perform one of the functions; inability to complete a function; the appearance on the screen of symbols or program primitives that do not correspond to the action; involuntary closing of the program window; closing the program window without warnings about saving data; other errors. The information obtained for testing the open parametric system of automated projection «Valentina» can be used in the future for the analysis of methods of testing software products and their improvement, as well as for the development of automated tests that can be implemented in the processes of creating and operating software products.
- 23 February 2023
- Published by Khmelnytskyi National University in Herald of Khmelnytskyi National University. Technical sciences
- Vol. 317 (1)
ANALYTICAL REVIEW OF INFORMATION FOR TESTING THE OPEN PARAMETRIC SYSTEM OF AUTOMATED PROJECTION «VALENTINA»
The article analyzes proprietary systems, such as Lectra systems (France), Gerber Garment Technology (USA), Investronika (Spain), Assyst GmbH (Germany), Wild Ginger Software (USA) and open PatternViewer (USA), Valentina (Ukraine) automated design systems for sewing production. An analytical review of the information for testing the open parametric system of automated projection and design «Valentina» was performed. It was determined that the theoretical foundations of automated testing of automated design systems are currently an incompletely resolved problem. The minimum list of data for qualitative testing is presented, which contains 10 items, the main of which are: listings of source texts of software products, external specification, test plan and methods, test options and obtained results. The article provides a list of Internet sources of the «Valentina» software product distribution, a list of communication methods, as well as a list of external specification items required for testing the «Valentina» software product. Various versions of the «Valentina» were considered, as well as the changes made in the test version v0.7.52 compared to the previous version v0.7.51. Various types of errors that occur during the development of new functions of software products are analyzed, including the inability to perform one of the functions; inability to complete a function; the appearance on the screen of symbols or program primitives that do not correspond to the action; involuntary closing of the program window; closing the program window without warnings about saving data; other errors. The information obtained for testing the open parametric system of automated projection «Valentina» can be used in the future for the analysis of methods of testing software products and their improvement, as well as for the development of automated tests that can be implemented in the processes of creating and operating software products.