Birgit Kanngießer
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Birgit Kanngießer has a total of 19 co-authors. Here are the top co-authors by number of shared publications:
- Andreas Germanos Karydas
Institute of Nuclear and Particle Physics, National Centre for Scientific Research Demokritos, 15310 Athens, Greece
2 shared publications Dimosthenis Sokaras
Institute of Nuclear Physics, NCSR Demokritos, Athens, Greece
2 shared publicationsRoman Schütz
Institute for Optic and Atomic Physics, Technical University of Berlin, Hardenbergstr. 36, 10623 Berlin, Germany
2 shared publicationsWolfgang Malzer
2 shared publicationsCharalambos Zarkadas
Institute of Nuclear Physics, NCSR “Demokritos”, Athens, Greece
1 shared publicationGundolf Weseloh
1 shared publication
Latest Publications
- 29 February 2008
- Published by Royal Society of Chemistry (RSC) in Journal of Analytical Atomic Spectrometry
- Vol. 23 (6) , 814-819
Non-destructive, depth resolved investigation of corrosion layers of historical glass objects by 3D Micro X-ray fluorescence analysis
3D Micro X-ray fluorescence analysis was used for the investigation of reverse-glass paintings. The material-specific combination used in reverse-glass paintings leads to damage phenomena reinforced by glass corrosion. To elucidate the mechanism of corrosion processes taking place in the glass object depth profiles of mobile elements are of interest. In order to obtain elemental depth profiles of such kind of fragile objects the method of choice should be non-destructive. Our first results demonstrate the usefulness of the 3D Micro-XRF measurements for this kind of investigations. The assumption that certain binding media may initiate corrosion processes beginning at the interface glass/binding material could be confirmed.
- 29 February 2008
- Published by Royal Society of Chemistry (RSC) in Journal of Analytical Atomic Spectrometry
- Vol. 23 (6) , 814-819
Non-destructive, depth resolved investigation of corrosion layers of historical glass objects by 3D Micro X-ray fluorescence analysis
3D Micro X-ray fluorescence analysis was used for the investigation of reverse-glass paintings. The material-specific combination used in reverse-glass paintings leads to damage phenomena reinforced by glass corrosion. To elucidate the mechanism of corrosion processes taking place in the glass object depth profiles of mobile elements are of interest. In order to obtain elemental depth profiles of such kind of fragile objects the method of choice should be non-destructive. Our first results demonstrate the usefulness of the 3D Micro-XRF measurements for this kind of investigations. The assumption that certain binding media may initiate corrosion processes beginning at the interface glass/binding material could be confirmed.
- 14 September 2007
- Published by Elsevier in Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms
- Vol. 264 (2) , 383-388
3D Micro-PIXE at atmospheric pressure: A new tool for the investigation of art and archaeological objects
- 14 September 2007
- Published by Elsevier in Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms
- Vol. 264 (2) , 383-388
3D Micro-PIXE at atmospheric pressure: A new tool for the investigation of art and archaeological objects
- 28 July 2007
- Published by Springer Nature in Analytical and Bioanalytical Chemistry
- Vol. 389 (4) , 1171-1176
Three-dimensional micro-XRF under cryogenic conditions: a pilot experiment for spatially resolved trace analysis in biological specimens
Three-dimensional micro-XRF is a recently developed microprobe which facilitates three-dimensional resolved chemical analyses with a resolution of around 20 μm. Arbitrary sites or sections of samples can be investigated without the need to section specimens physically. In this paper we demonstrate the use of the microprobe in combination with a cold nitrogen gas stream for the cryogenic fixation of specimens. A 3D micro-XRF setup at the new microfocus beamline at BESSY II was equipped with a nitrogen cryogenic stream. The distribution of Ca, Fe, Zn and Cu across virtual cross sections of a water-rich sample, the root of common duckweed, could be investigated without further sample preparation. This paper demonstrates the capabilities of 3D micro-XRF under cryogenic conditions for investigations of biological specimens.
- 28 July 2007
- Published by Springer Nature in Analytical and Bioanalytical Chemistry
- Vol. 389 (4) , 1171-1176
Three-dimensional micro-XRF under cryogenic conditions: a pilot experiment for spatially resolved trace analysis in biological specimens
Three-dimensional micro-XRF is a recently developed microprobe which facilitates three-dimensional resolved chemical analyses with a resolution of around 20 μm. Arbitrary sites or sections of samples can be investigated without the need to section specimens physically. In this paper we demonstrate the use of the microprobe in combination with a cold nitrogen gas stream for the cryogenic fixation of specimens. A 3D micro-XRF setup at the new microfocus beamline at BESSY II was equipped with a nitrogen cryogenic stream. The distribution of Ca, Fe, Zn and Cu across virtual cross sections of a water-rich sample, the root of common duckweed, could be investigated without further sample preparation. This paper demonstrates the capabilities of 3D micro-XRF under cryogenic conditions for investigations of biological specimens.
- 27 June 2007
- Published by Royal Society of Chemistry (RSC) in Journal of Analytical Atomic Spectrometry
- Vol. 22 (10) , 1260-1265
3D Micro PIXE—a new technique for depth-resolved elemental analysis
A novel experimental technique, 3D micro-particle-induced X-ray emission (PIXE) is described in the present paper. 3D Micro-PIXE is realized by using an X-ray optic in front of the detector, thus creating a confocal arrangement together with the focused proton micro-beam. This confocal setup defines a probing volume from which information on elemental distribution is obtained. If a sample is moved through the probing volume, depth-resolved measurements become possible. The confocal setup was characterized with respect to its spatial and depth resolution. As an example of application for this new non-destructive analytical technique, an archaeological ceramic fragment was examined. A first approach to simulate the complex experimental results is performed. The potential of 3D micro-PIXE to provide advanced qualitative information on the elemental distribution in the sample is discussed.
- 27 June 2007
- Published by Royal Society of Chemistry (RSC) in Journal of Analytical Atomic Spectrometry
- Vol. 22 (10) , 1260-1265
3D Micro PIXE—a new technique for depth-resolved elemental analysis
A novel experimental technique, 3D micro-particle-induced X-ray emission (PIXE) is described in the present paper. 3D Micro-PIXE is realized by using an X-ray optic in front of the detector, thus creating a confocal arrangement together with the focused proton micro-beam. This confocal setup defines a probing volume from which information on elemental distribution is obtained. If a sample is moved through the probing volume, depth-resolved measurements become possible. The confocal setup was characterized with respect to its spatial and depth resolution. As an example of application for this new non-destructive analytical technique, an archaeological ceramic fragment was examined. A first approach to simulate the complex experimental results is performed. The potential of 3D micro-PIXE to provide advanced qualitative information on the elemental distribution in the sample is discussed.