Yong Jun Cho
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Yong Jun Cho has a total of 22 co-authors. Here are the top co-authors by number of shared publications:
Korean Society Of Coastal Disaster Prevention
8 shared publicationsIn Ho Kim
2 shared publicationsYong Hee Kim
Technical Standards center for Ports & Harbours Korea Ports & Harbours Association Seoul, Republic of Korea
2 shared publicationsHan Rim Choi
1 shared publicationHyung Jae Lee
Department of Civil Engineering University of Seoul 163 Seoulsiripdaero Dongdaemun-gu 02504 Seoul Korea
1 shared publicationIn-Ho Kim
Department of Earth and Environmental Engineering Kangwon National University Samcheok, Republic of Korea
1 shared publication
Latest Publications
- Open Access
- 4 November 2024
- Published by Springer Nature in Research Square
Numerical Analysis of Nonlinear Shoaling and Its Impact on Suspended Sediment Dynamics across Surf and Swash Zones: A Navier–Stokes Approach Enhanced by Lagrangian Dynamic Smagorinsky Modeling with SPH
To develop a phase-resolving wave driver and establish a foundation for a comprehensive morphology model aimed at understanding the year-long circulation processes of sandy beaches and addressing beach erosion, the author introduced a wave driver based on the spatially averaged Navier–Stokes equations. Numerical investigations were conducted to evaluate the nonlinear shoaling characteristics of regular waves and their effects on suspended sediment dynamics across the surf and swash zones. To thoroughly validate the wave driver, bottom shear stress data from Sumer et al. (2013) were utilized, as bottom shear stress is a critical factor influencing the performance of morphology models. The author modeled the residual stress in the spatially averaged Navier–Stokes equations using the Lagrangian Dynamic Smagorinsky approach (Meneveau et al., 1996), which effectively resolves the turbulent flow of coherent structures—an essential feature in the surf and swash zones. Despite the importance of accurately capturing small-scale turbulent flows with coherent structures, many previous studies have relied on the standard Smagorinsky model, which is less effective in representing such turbulence. The author then numerically integrated the new wave driver using Smoothed Particle Hydrodynamics (SPH) with a Gaussian kernel function. The simulation successfully replicated complex wave dynamics, including severely deformed free water surfaces, free-falling water particles from wave crests, splashes upon particle impacts with the surface, and wave fingers formed by structured vortices on the up-wave side (Narayanaswamy and Dalrymple, 2002)—features that are notoriously challenging to replicate in computational fluid dynamics. Further analysis revealed that the widely used standard Smagorinsky model (\(\:{C}_{S}=0.12\)) excessively dampened the water surface profile due to overestimated energy dissipation from wave breaking. This led to the loss of critical flow features, such as reverse breaking, which are observed both in nature and in simulations using the Lagrangian Dynamic Smagorinsky model. Furthermore, instead of relying on the traditional quadratic friction law with a fixed friction coefficient, the author estimated bottom shear stress directly from the numerically simulated velocity profile and the dynamic Smagorinsky coefficient. These simulations showed that maximum bottom shear stress occurred when a broken wave, or bore, surged into the deep swash zone. The overall agreement with the measured data from Sumer et al. (2013) confirmed the accuracy and reliability of the new wave driver. The study demonstrated that the evolution of bottom shear stress within a wave period—particularly its asymmetric behavior in the surf zone, where most sediment movement occurs—can be accurately simulated using the new wave driver. These detailed characteristics of bottom shear stress are crucial for a morphology model that aims to capture the year-long circulation processes of sandy beaches and effectively address beach erosion. This is especially important because the seasonal migration of offshore bars is strongly influenced by asymmetrically accelerated flow and the resulting enhanced under-tow. The effectiveness of the newly proposed wave driver in capturing these key features, including boundary layer streaming, was further validated through numerical simulations, which demonstrated the evolution of suspended sediment across the surf and swash zones, with a sediment cloud gradually drifting offshore due to the intensified under-tow.- 4 November 2024
- Published by Springer Nature in Research Square
Open AccessNumerical Analysis of Nonlinear Shoaling and Its Impact on Suspended Sediment Dynamics across Surf and Swash Zones: A Navier–Stokes Approach Enhanced by Lagrangian Dynamic Smagorinsky Modeling with SPH
To develop a phase-resolving wave driver and establish a foundation for a comprehensive morphology model aimed at understanding the year-long circulation processes of sandy beaches and addressing beach erosion, the author introduced a wave driver based on the spatially averaged Navier–Stokes equations. Numerical investigations were conducted to evaluate the nonlinear shoaling characteristics of regular waves and their effects on suspended sediment dynamics across the surf and swash zones. To thoroughly validate the wave driver, bottom shear stress data from Sumer et al. (2013) were utilized, as bottom shear stress is a critical factor influencing the performance of morphology models. The author modeled the residual stress in the spatially averaged Navier–Stokes equations using the Lagrangian Dynamic Smagorinsky approach (Meneveau et al., 1996), which effectively resolves the turbulent flow of coherent structures—an essential feature in the surf and swash zones. Despite the importance of accurately capturing small-scale turbulent flows with coherent structures, many previous studies have relied on the standard Smagorinsky model, which is less effective in representing such turbulence. The author then numerically integrated the new wave driver using Smoothed Particle Hydrodynamics (SPH) with a Gaussian kernel function. The simulation successfully replicated complex wave dynamics, including severely deformed free water surfaces, free-falling water particles from wave crests, splashes upon particle impacts with the surface, and wave fingers formed by structured vortices on the up-wave side (Narayanaswamy and Dalrymple, 2002)—features that are notoriously challenging to replicate in computational fluid dynamics. Further analysis revealed that the widely used standard Smagorinsky model (\(\:{C}_{S}=0.12\)) excessively dampened the water surface profile due to overestimated energy dissipation from wave breaking. This led to the loss of critical flow features, such as reverse breaking, which are observed both in nature and in simulations using the Lagrangian Dynamic Smagorinsky model. Furthermore, instead of relying on the traditional quadratic friction law with a fixed friction coefficient, the author estimated bottom shear stress directly from the numerically simulated velocity profile and the dynamic Smagorinsky coefficient. These simulations showed that maximum bottom shear stress occurred when a broken wave, or bore, surged into the deep swash zone. The overall agreement with the measured data from Sumer et al. (2013) confirmed the accuracy and reliability of the new wave driver. The study demonstrated that the evolution of bottom shear stress within a wave period—particularly its asymmetric behavior in the surf zone, where most sediment movement occurs—can be accurately simulated using the new wave driver. These detailed characteristics of bottom shear stress are crucial for a morphology model that aims to capture the year-long circulation processes of sandy beaches and effectively address beach erosion. This is especially important because the seasonal migration of offshore bars is strongly influenced by asymmetrically accelerated flow and the resulting enhanced under-tow. The effectiveness of the newly proposed wave driver in capturing these key features, including boundary layer streaming, was further validated through numerical simulations, which demonstrated the evolution of suspended sediment across the surf and swash zones, with a sediment cloud gradually drifting offshore due to the intensified under-tow. - Open Access
- 22 October 2024
- Published by Springer Nature in Scientific Reports
- Vol. 14 (1) , 1-29
Optimal design of deep stormwater drainage tunnels to address urban flooding in Korea
Deep stormwater drainage tunnels play a crucial role in mitigating severe urban flooding in Korea, particularly as climate change leads to more extreme weather events. These tunnels typically consist of an entrance reservoir, a circular reinforced concrete culvert with a flat slope, a downstream reservoir, and an outlet to a nearby river. In this system, the flow within the circular culvert is driven solely by the momentum of free-falling stormwater runoff. However, concerns have emerged within the Korean water resources engineering community about the drainage capacity of these tunnels, even with a substantial fall height of approximately 30 m. Intensified localized rainfall, the abrupt transition from flood waves to pressurized flow within the circular culvert, and trapped air pockets can also pose significant challenges to the tunnel’s drainage efficiency. Conventional design methods often fail to optimize the culvert’s diameter and spatial configuration, leading to suboptimal performance. In response, this study utilizes 3D numerical simulations with the interFoam solver from the OpenFOAM toolbox to address these issues. The results indicate that smaller culvert diameters—provided they do not exceed the maximum permissible flow velocity—enhance drainage capacity by reducing the impact of shock waves and stabilizing flow. These findings challenge the prevailing design practice in Korea, which holds that larger culverts inherently offer superior drainage capacity. Moreover, the simulations suggest that as culvert diameters increase, the size of trapped air pockets grows, further reducing efficiency. Although air chambers can help mitigate the retarding effects of trapped air pockets, their effectiveness diminishes if positioned near the origin of shock waves, where they risk being filled with stormwater. Based on these insights, several key recommendations are proposed: First, the design of deep stormwater tunnels should prioritize minimizing the extent of trapped air pockets, even when air chambers are used. Second, the current focus on detention capacity in design practices should be reevaluated, as excessive detention capacity may exacerbate air pocket formation. Finally, modifying the inlet channel to induce spiral flow within the entrance reservoir could reduce impulsive forces, lower maintenance costs related to armoring rocks at the reservoir bottom, and stabilize flow more quickly, thereby enhancing overall drainage capacity.
- 22 October 2024
- Published by Springer Nature in Scientific Reports
- Vol. 14 (1) , 1-29
Open AccessOptimal design of deep stormwater drainage tunnels to address urban flooding in Korea
Deep stormwater drainage tunnels play a crucial role in mitigating severe urban flooding in Korea, particularly as climate change leads to more extreme weather events. These tunnels typically consist of an entrance reservoir, a circular reinforced concrete culvert with a flat slope, a downstream reservoir, and an outlet to a nearby river. In this system, the flow within the circular culvert is driven solely by the momentum of free-falling stormwater runoff. However, concerns have emerged within the Korean water resources engineering community about the drainage capacity of these tunnels, even with a substantial fall height of approximately 30 m. Intensified localized rainfall, the abrupt transition from flood waves to pressurized flow within the circular culvert, and trapped air pockets can also pose significant challenges to the tunnel’s drainage efficiency. Conventional design methods often fail to optimize the culvert’s diameter and spatial configuration, leading to suboptimal performance. In response, this study utilizes 3D numerical simulations with the interFoam solver from the OpenFOAM toolbox to address these issues. The results indicate that smaller culvert diameters—provided they do not exceed the maximum permissible flow velocity—enhance drainage capacity by reducing the impact of shock waves and stabilizing flow. These findings challenge the prevailing design practice in Korea, which holds that larger culverts inherently offer superior drainage capacity. Moreover, the simulations suggest that as culvert diameters increase, the size of trapped air pockets grows, further reducing efficiency. Although air chambers can help mitigate the retarding effects of trapped air pockets, their effectiveness diminishes if positioned near the origin of shock waves, where they risk being filled with stormwater. Based on these insights, several key recommendations are proposed: First, the design of deep stormwater tunnels should prioritize minimizing the extent of trapped air pockets, even when air chambers are used. Second, the current focus on detention capacity in design practices should be reevaluated, as excessive detention capacity may exacerbate air pocket formation. Finally, modifying the inlet channel to induce spiral flow within the entrance reservoir could reduce impulsive forces, lower maintenance costs related to armoring rocks at the reservoir bottom, and stabilize flow more quickly, thereby enhancing overall drainage capacity.
- Open Access
- 20 April 2024
- Published by Springer Nature in Scientific Reports
- Vol. 14 (1) , 1-30
Reliability-based design optimization for a vertical-type breakwater with multiple limit-state equations under Korean marine environments varying from sea to sea
In this study, as part of basic research aimed at enhancing the accuracy of load and resistance coefficients to ensure their suitability for practical design and promoting the application of underutilized reliability-based design in Korea, the author conducts optimal design based on the reliability analysis of a vertical-type breakwater in the seas off of Haeundae, Yeosu, Mokpo, Gunsan, and Incheon—representative ports in Korea. In doing so, the author utilized the double-loop approach, which simultaneously addresses a reliability problem nested within an optimization process, employing the Polak–He optimization algorithm. To mitigate the substantial numerical effort required by the double-loop approach based on the Polak–He optimization algorithm, which necessitates the gradients of both cost and constraint functions, the subset simulation method was employed. In this process, the author deliberately refrained from using design waves of a specific return period and linear probabilistic models such as the Gaussian distribution, especially concerning wave and lift forces, often viewed as barriers to the widespread application of reliability-based design in Korea. Instead, the author focused on characterizing the uncertainties associated with the wave force, lift force, and overturning moment—variables that significantly impact the integrity of vertical-type breakwaters—by developing probabilistic models for these random variables directly from long-term in situ wave data. These models capture the varied characteristics of the Korean marine environment from sea to sea. In this way, the need for additional assumptions concerning the interrelationship between significant wave and maximum wave heights, along with the wave period, can be eliminated. Following Occam's razor principle, which suggests that explanations constructed with the smallest possible set of assumptions are superior, the reliability-based design optimization of a vertical-type breakwater presented in this study demonstrates promise in terms of simplicity and practicality. The limit state of the vertical-type breakwater was defined to encompass sliding, overturning, and collapse failures, and the strong interrelations between the wave force, lift force, and overturning moment were described using the Nataf joint distribution. As anticipated, simulation results show that solely considering sliding failure, as in the current reliability-based design platform in Korea, leads to an underestimated failure probability. Furthermore, ensuring a consistent failure probability for vertical-type breakwaters using design waves with a specific return period, as in past studies, is not feasible. In contrast, this study demonstrated that breakwaters optimally designed to meet the reliability index requirement of β = 3.5–4 consistently maintain a target failure probability in all sea areas.
- 20 April 2024
- Published by Springer Nature in Scientific Reports
- Vol. 14 (1) , 1-30
Open AccessReliability-based design optimization for a vertical-type breakwater with multiple limit-state equations under Korean marine environments varying from sea to sea
In this study, as part of basic research aimed at enhancing the accuracy of load and resistance coefficients to ensure their suitability for practical design and promoting the application of underutilized reliability-based design in Korea, the author conducts optimal design based on the reliability analysis of a vertical-type breakwater in the seas off of Haeundae, Yeosu, Mokpo, Gunsan, and Incheon—representative ports in Korea. In doing so, the author utilized the double-loop approach, which simultaneously addresses a reliability problem nested within an optimization process, employing the Polak–He optimization algorithm. To mitigate the substantial numerical effort required by the double-loop approach based on the Polak–He optimization algorithm, which necessitates the gradients of both cost and constraint functions, the subset simulation method was employed. In this process, the author deliberately refrained from using design waves of a specific return period and linear probabilistic models such as the Gaussian distribution, especially concerning wave and lift forces, often viewed as barriers to the widespread application of reliability-based design in Korea. Instead, the author focused on characterizing the uncertainties associated with the wave force, lift force, and overturning moment—variables that significantly impact the integrity of vertical-type breakwaters—by developing probabilistic models for these random variables directly from long-term in situ wave data. These models capture the varied characteristics of the Korean marine environment from sea to sea. In this way, the need for additional assumptions concerning the interrelationship between significant wave and maximum wave heights, along with the wave period, can be eliminated. Following Occam's razor principle, which suggests that explanations constructed with the smallest possible set of assumptions are superior, the reliability-based design optimization of a vertical-type breakwater presented in this study demonstrates promise in terms of simplicity and practicality. The limit state of the vertical-type breakwater was defined to encompass sliding, overturning, and collapse failures, and the strong interrelations between the wave force, lift force, and overturning moment were described using the Nataf joint distribution. As anticipated, simulation results show that solely considering sliding failure, as in the current reliability-based design platform in Korea, leads to an underestimated failure probability. Furthermore, ensuring a consistent failure probability for vertical-type breakwaters using design waves with a specific return period, as in past studies, is not feasible. In contrast, this study demonstrated that breakwaters optimally designed to meet the reliability index requirement of β = 3.5–4 consistently maintain a target failure probability in all sea areas.
- Open Access
- 13 April 2024
- Published by Korean Society of Coastal and Ocean Engineers in Journal of Korean Society of Coastal and Ocean Engineers
- Vol. 36 (2) , 50-60
Reliability-Based Design Optimization for a Vertical-Type Breakwater with an Emphasis on Sliding, Overturn, and Collapse Failure
요 지 : 우리나라 해안공학계에서 신뢰성 기반설계가 빠르게 체화되는 계기를 제공하기 위해 다 수의 한계상태를 지닌 직립방파제 신뢰성 해석과 신뢰성 기반 최적 설계를 우리나라를 대표하는 항이 운영 중인 부산, 군산 전면해 역을 대상으로 수행하였다. 이 과정에서 상당한 정도의 신뢰성 해석을 수행하기 위해, 특정 재현 빈도의 설계 파 사 용은 지양하였으며, 직립방파제의 파괴 여부를 결정하는 확률변수인 파력, 양력, 전도 모멘트에 내재한 불확실성은 장기 파랑 관측자료를 빈도 해석하여 얻은 확률모형을 사용하여 기술하였다. 직립식 방파제의 한계상태는 활동, 전 도, 지지력을 고려하여 세 개로 구성하였으며, 파력과 양력, 모멘트 사이의 밀접한 상관성은 Nataf 결합확률분포를 사용하여 기술하였다. 모의 결과, 쉽게 예상해볼 수 있듯 활동만을 고려하는 경우 파괴확률이 과소하게 산출되는 것을 확인하였으며, 특정 재현 빈도에 근거한 설계 파랑으로는 방파제 파괴확률을 일정하게 담보할 수 없다는 것을 확인하였다
- 13 April 2024
- Published by Korean Society of Coastal and Ocean Engineers in Journal of Korean Society of Coastal and Ocean Engineers
- Vol. 36 (2) , 50-60
Open AccessReliability-Based Design Optimization for a Vertical-Type Breakwater with an Emphasis on Sliding, Overturn, and Collapse Failure
요 지 : 우리나라 해안공학계에서 신뢰성 기반설계가 빠르게 체화되는 계기를 제공하기 위해 다 수의 한계상태를 지닌 직립방파제 신뢰성 해석과 신뢰성 기반 최적 설계를 우리나라를 대표하는 항이 운영 중인 부산, 군산 전면해 역을 대상으로 수행하였다. 이 과정에서 상당한 정도의 신뢰성 해석을 수행하기 위해, 특정 재현 빈도의 설계 파 사 용은 지양하였으며, 직립방파제의 파괴 여부를 결정하는 확률변수인 파력, 양력, 전도 모멘트에 내재한 불확실성은 장기 파랑 관측자료를 빈도 해석하여 얻은 확률모형을 사용하여 기술하였다. 직립식 방파제의 한계상태는 활동, 전 도, 지지력을 고려하여 세 개로 구성하였으며, 파력과 양력, 모멘트 사이의 밀접한 상관성은 Nataf 결합확률분포를 사용하여 기술하였다. 모의 결과, 쉽게 예상해볼 수 있듯 활동만을 고려하는 경우 파괴확률이 과소하게 산출되는 것을 확인하였으며, 특정 재현 빈도에 근거한 설계 파랑으로는 방파제 파괴확률을 일정하게 담보할 수 없다는 것을 확인하였다
- Open Access
- 12 February 2024
- Published by Korean Society of Coastal and Ocean Engineers in Journal of Korean Society of Coastal and Ocean Engineers
- Vol. 36 (1) , 20-36
Development of Probabilistic Models Optimized for Korean Marine Environment Varying from Sea to Sea Based on the Three-parameter Weibull Distribution
요 지 : 본 연구에서는 먼저 우리나라 해역별 해양환경 특성이 담긴 장기 파랑 관측자료로부터 Goda 모형을 활용하여 파력과 양력 시계열자료를 생성하였다. 이어 이렇게 생성된 시계열자료부터 Three-parameter Weibull distribution에 기반한 파력과 양력 확률모형을 개발하였다. 해역별로 다른 우리나라 해양환경은 파력과 양력 확 률모형 모수에서도 그 차이를 확연하게 드러내었다. 충분히 발달한 풍성 파가 우월한 남해안의 경우 큰 Scale Coefficient, 작은 Location Coefficient, 1.3 전후의 Shape Coefficient로 특정되는 것을 확인하였다. 이에 비해 파랑의 성장이 취송거리에 의해 제한되는 서해를 마주하고 있는 군산의 경우 작은 Scale Coefficient, 큰 Location Coefficient, 2.0 전후의 Shape Coefficient로 특정되었다. 서해와 남해가 만나는 해역을 마주하고 있는 목포의 경우 작은 Scale Coefficient, 큰 Location Coefficient, 제일 작은 Shape Coefficient를 지녀 남해와
- 12 February 2024
- Published by Korean Society of Coastal and Ocean Engineers in Journal of Korean Society of Coastal and Ocean Engineers
- Vol. 36 (1) , 20-36
Open AccessDevelopment of Probabilistic Models Optimized for Korean Marine Environment Varying from Sea to Sea Based on the Three-parameter Weibull Distribution
요 지 : 본 연구에서는 먼저 우리나라 해역별 해양환경 특성이 담긴 장기 파랑 관측자료로부터 Goda 모형을 활용하여 파력과 양력 시계열자료를 생성하였다. 이어 이렇게 생성된 시계열자료부터 Three-parameter Weibull distribution에 기반한 파력과 양력 확률모형을 개발하였다. 해역별로 다른 우리나라 해양환경은 파력과 양력 확 률모형 모수에서도 그 차이를 확연하게 드러내었다. 충분히 발달한 풍성 파가 우월한 남해안의 경우 큰 Scale Coefficient, 작은 Location Coefficient, 1.3 전후의 Shape Coefficient로 특정되는 것을 확인하였다. 이에 비해 파랑의 성장이 취송거리에 의해 제한되는 서해를 마주하고 있는 군산의 경우 작은 Scale Coefficient, 큰 Location Coefficient, 2.0 전후의 Shape Coefficient로 특정되었다. 서해와 남해가 만나는 해역을 마주하고 있는 목포의 경우 작은 Scale Coefficient, 큰 Location Coefficient, 제일 작은 Shape Coefficient를 지녀 남해와
- Open Access
- 8 February 2024
- Published by Springer Nature in Research Square
Numerical Analysis of Nonlinear Shoaling Characteristics in the Surf and Swash Zones: Spatially Averaged Navier–Stokes Equations with Lagrangian Dynamic Smagorinsky Model and SPH
As part of an effort to develop a phase-resolving wave driver and establish a robust foundation for a comprehensive morphology model capable of describing the year-long circulation process of sandy beaches and addressing beach erosion, the authors introduced a wave driver comprising the spatially averaged Navier–Stokes equations. To verify the newly proposed wave driver, the authors numerically investigated the nonlinear shoaling characteristics of the surf and swash zones. The authors also tested the validity of the eddy viscosity model for Reynolds stress due to wave breaking using data from the Super Tank Laboratory Data Collection Project (Krauss et al., 1992). The characteristic length scale of the breaking-induced current is not negligible, posing a clear contradiction to the applicability of widely used eddy viscosity models, such as the, and instead favoring large eddy simulation (LES) with finer grids. In light of these observations, the residual stress in the spatially averaged Navier‒Stokes equation is modeled based on the Lagrangian dynamic Smagorinsky approach (Meneveau et al., 1996). The authors numerically integrate newly proposed wave driver using SPH with a Gaussian kernel function. A severely deformed free water surface profile, free-falling water particles from the wave crest, queuing splashes after water particles land on the free surface, and wave fingers resulting from structured vortices on the up-wave side of the wave crest (Narayanaswamy and Dalrymple, 2002) are successfully duplicated in the numerical simulation of wave propagation over a uniform slope beach: these features have been regarded as very difficult to duplicate in computational fluid mechanics. The numerical simulation also indicates that the widely used Standard Smagorinsky model with in the literature results in an excessively dampened water surface profile, attributed to the overestimated energy dissipation from wave breaking, leading to the loss of picturesque features, such as reverse breaking, observed both in nature and in numerical simulations using the Dynamic Smagorinsky model. Furthermore, the bottom shearing stress was estimated using the numerically simulated velocity profile and dynamic Smagorinsky coefficient, rather than relying on the quadratic friction law with a friction coefficient, as in the literature. The observation revealed that the maximum bottom shearing stress occurred when a broken wave, commonly known as a bore, rushed into the deep swash zone. Additionally, the study demonstrated that every aspect of the evolution of bottom shear stress within a wave period, such as its asymmetric nature over the surf zone where most of the sediment available along the beach is activated, could be precisely simulated using the newly proposed wave driver. These features of bottom shear stress over the surf and swash zones are crucial prerequisites for a morphology model to accurately describe the year-long circulation process of sandy beaches and effectively address beach erosion. This is particularly important, as the seasonal migration of an offshore bar is closely related to asymmetrically accelerated flows.
- 8 February 2024
- Published by Springer Nature in Research Square
Open AccessNumerical Analysis of Nonlinear Shoaling Characteristics in the Surf and Swash Zones: Spatially Averaged Navier–Stokes Equations with Lagrangian Dynamic Smagorinsky Model and SPH
As part of an effort to develop a phase-resolving wave driver and establish a robust foundation for a comprehensive morphology model capable of describing the year-long circulation process of sandy beaches and addressing beach erosion, the authors introduced a wave driver comprising the spatially averaged Navier–Stokes equations. To verify the newly proposed wave driver, the authors numerically investigated the nonlinear shoaling characteristics of the surf and swash zones. The authors also tested the validity of the eddy viscosity model for Reynolds stress due to wave breaking using data from the Super Tank Laboratory Data Collection Project (Krauss et al., 1992). The characteristic length scale of the breaking-induced current is not negligible, posing a clear contradiction to the applicability of widely used eddy viscosity models, such as the, and instead favoring large eddy simulation (LES) with finer grids. In light of these observations, the residual stress in the spatially averaged Navier‒Stokes equation is modeled based on the Lagrangian dynamic Smagorinsky approach (Meneveau et al., 1996). The authors numerically integrate newly proposed wave driver using SPH with a Gaussian kernel function. A severely deformed free water surface profile, free-falling water particles from the wave crest, queuing splashes after water particles land on the free surface, and wave fingers resulting from structured vortices on the up-wave side of the wave crest (Narayanaswamy and Dalrymple, 2002) are successfully duplicated in the numerical simulation of wave propagation over a uniform slope beach: these features have been regarded as very difficult to duplicate in computational fluid mechanics. The numerical simulation also indicates that the widely used Standard Smagorinsky model with in the literature results in an excessively dampened water surface profile, attributed to the overestimated energy dissipation from wave breaking, leading to the loss of picturesque features, such as reverse breaking, observed both in nature and in numerical simulations using the Dynamic Smagorinsky model. Furthermore, the bottom shearing stress was estimated using the numerically simulated velocity profile and dynamic Smagorinsky coefficient, rather than relying on the quadratic friction law with a friction coefficient, as in the literature. The observation revealed that the maximum bottom shearing stress occurred when a broken wave, commonly known as a bore, rushed into the deep swash zone. Additionally, the study demonstrated that every aspect of the evolution of bottom shear stress within a wave period, such as its asymmetric nature over the surf zone where most of the sediment available along the beach is activated, could be precisely simulated using the newly proposed wave driver. These features of bottom shear stress over the surf and swash zones are crucial prerequisites for a morphology model to accurately describe the year-long circulation process of sandy beaches and effectively address beach erosion. This is particularly important, as the seasonal migration of an offshore bar is closely related to asymmetrically accelerated flows.
- Open Access
- 16 January 2024
- Published by Springer Nature in Research Square
Reliability-Based Design Optimization for a Vertical-Type Breakwater with Multiple Limit State Equations under Korean Marine Environments varying from Sea to Sea
In this study, as part of basic research aimed at enhancing the accuracy of load- and resistance coefficients to ensure their suitability for practical design and promoting the application of underutilized reliability-based design in Korea, the author conducts optimal design based on the reliability analysis of a vertical-type breakwater in the seas off Haeundae, Yeosu, Mokpo, Gunsan, and Incheon – representative ports in Korea. In doing so, the author utilized the double-loop approach that solves simultaneously a reliability problem nested in an optimization process. To alleviate the extremely large numerical efforts demanded in the double-loop approach, the Subset Simulation method was employed. In this process, the author deliberately refrained from using design waves of a specific return period and linear probabilistic models such as Gaussian distribution, especially concerning wave- and lift forces, often viewed as barriers to the widespread application of reliability-based design in Korea. Instead, the author focused on characterizing the uncertainties associated with wave force, lift force, and overturning moment —variables that significantly impact the integrity of vertical-type breakwaters- by developing probabilistic models for these random variables directly from long-term in-situ wave data, which captures the varied characteristics of the Korean marine environment from sea to sea. The limit state of the vertical-type breakwater was defined to encompass sliding, overturning, and collapse failures, and the strong interrelation between wave force, lift force, and overturning moment was described using the Nataf joint probability distribution. As anticipated, simulation results show that solely considering sliding failure, as in the current reliability-based design platform in Korea, leads to an underestimated failure probability. Furthermore, it becomes evident that ensuring a consistent failure probability for vertical-type breakwaters using design waves with a specific return period, as in past studies, is not feasible. In contrast, this study demonstrates that breakwaters optimally designed to meet the reliability index requirement of β-3.5 to 4 consistently maintain a target failure probability in all sea areas.
- 16 January 2024
- Published by Springer Nature in Research Square
Open AccessReliability-Based Design Optimization for a Vertical-Type Breakwater with Multiple Limit State Equations under Korean Marine Environments varying from Sea to Sea
In this study, as part of basic research aimed at enhancing the accuracy of load- and resistance coefficients to ensure their suitability for practical design and promoting the application of underutilized reliability-based design in Korea, the author conducts optimal design based on the reliability analysis of a vertical-type breakwater in the seas off Haeundae, Yeosu, Mokpo, Gunsan, and Incheon – representative ports in Korea. In doing so, the author utilized the double-loop approach that solves simultaneously a reliability problem nested in an optimization process. To alleviate the extremely large numerical efforts demanded in the double-loop approach, the Subset Simulation method was employed. In this process, the author deliberately refrained from using design waves of a specific return period and linear probabilistic models such as Gaussian distribution, especially concerning wave- and lift forces, often viewed as barriers to the widespread application of reliability-based design in Korea. Instead, the author focused on characterizing the uncertainties associated with wave force, lift force, and overturning moment —variables that significantly impact the integrity of vertical-type breakwaters- by developing probabilistic models for these random variables directly from long-term in-situ wave data, which captures the varied characteristics of the Korean marine environment from sea to sea. The limit state of the vertical-type breakwater was defined to encompass sliding, overturning, and collapse failures, and the strong interrelation between wave force, lift force, and overturning moment was described using the Nataf joint probability distribution. As anticipated, simulation results show that solely considering sliding failure, as in the current reliability-based design platform in Korea, leads to an underestimated failure probability. Furthermore, it becomes evident that ensuring a consistent failure probability for vertical-type breakwaters using design waves with a specific return period, as in past studies, is not feasible. In contrast, this study demonstrates that breakwaters optimally designed to meet the reliability index requirement of β-3.5 to 4 consistently maintain a target failure probability in all sea areas.
- 1 February 2023
- Published by Coastal Education and Research Foundation in Journal of Coastal Research
- Vol. 116 (sp1) , 618-622
How the Beach Restoration Process, Driven by Bound Mode Infra-Gravity Waves Underlying Swells in a Mild Sea, is Affected by the Presence of Low Crested Breakwater [LCB]: A Numerical Study
Jo, Y.J. and Cho, Y.J., 2023. How the beach restoration process, driven by bound mode infra-gravity waves underlying swells in a mild sea, is affected by the presence of LCB: A numerical study. In: Lee, J.L.; Lee, H.; Min, B.I.; Chang, J.-I.; Cho, G.T.; Yoon, J.-S., and Lee, J. (eds.), Multidisciplinary Approaches to Coastal and Marine Management. Journal of Coastal Research, Special Issue No. 116, pp. 618-622. Charlotte (North Carolina), ISSN 0749-0208. This study aims to numerically investigate the impact of Low Crested Breakwater [LCB] on the beach restoration process driven by bound mode infra-gravity waves beneath swells in a mild sea. In doing so, the authors also delve into the evolving extent of boundedness of infra-gravity waves to a wave packet during shoaling. Additionally, the authors explore the effects of this evolution on sediment transport. The infra-gravity waves were extracted from a numerically simulated wave field using the Empirical Mode Decomposition method. Numerical results reveal a transition in the cross-correlation between a wave packet and infra-gravity waves from negative to positive during shoaling, especially when the phase of infra-gravity waves is initially shifted by as much as π. These correlation patterns align well with the wave data acquired by Abdelrahman and Thornton. Furthermore, the degree of boundedness of infra-gravity waves to a wave packet has a significant impact on the sediment transport rate. When fully phase-locked, a substantial amount of sand, in the form of bedload, escapes offshore through the open inlet between LCB. Approximately 5 × 10–3m3/m of sand exits the inner zone of LCB per unit amplitude modulation period of a wave packet. Conversely, with a phase shift of π, the primary sediment transport mode at the open inlet between LCB becomes bedload. Sand migrating toward the shore balances with offshore-directed sediment transport, marking a departure from previous studies focused on monochromatic waves only.
- 1 February 2023
- Published by Coastal Education and Research Foundation in Journal of Coastal Research
- Vol. 116 (sp1) , 618-622
How the Beach Restoration Process, Driven by Bound Mode Infra-Gravity Waves Underlying Swells in a Mild Sea, is Affected by the Presence of Low Crested Breakwater [LCB]: A Numerical Study
Jo, Y.J. and Cho, Y.J., 2023. How the beach restoration process, driven by bound mode infra-gravity waves underlying swells in a mild sea, is affected by the presence of LCB: A numerical study. In: Lee, J.L.; Lee, H.; Min, B.I.; Chang, J.-I.; Cho, G.T.; Yoon, J.-S., and Lee, J. (eds.), Multidisciplinary Approaches to Coastal and Marine Management. Journal of Coastal Research, Special Issue No. 116, pp. 618-622. Charlotte (North Carolina), ISSN 0749-0208. This study aims to numerically investigate the impact of Low Crested Breakwater [LCB] on the beach restoration process driven by bound mode infra-gravity waves beneath swells in a mild sea. In doing so, the authors also delve into the evolving extent of boundedness of infra-gravity waves to a wave packet during shoaling. Additionally, the authors explore the effects of this evolution on sediment transport. The infra-gravity waves were extracted from a numerically simulated wave field using the Empirical Mode Decomposition method. Numerical results reveal a transition in the cross-correlation between a wave packet and infra-gravity waves from negative to positive during shoaling, especially when the phase of infra-gravity waves is initially shifted by as much as π. These correlation patterns align well with the wave data acquired by Abdelrahman and Thornton. Furthermore, the degree of boundedness of infra-gravity waves to a wave packet has a significant impact on the sediment transport rate. When fully phase-locked, a substantial amount of sand, in the form of bedload, escapes offshore through the open inlet between LCB. Approximately 5 × 10–3m3/m of sand exits the inner zone of LCB per unit amplitude modulation period of a wave packet. Conversely, with a phase shift of π, the primary sediment transport mode at the open inlet between LCB becomes bedload. Sand migrating toward the shore balances with offshore-directed sediment transport, marking a departure from previous studies focused on monochromatic waves only.
- 1 February 2023
- Published by Coastal Education and Research Foundation in Journal of Coastal Research
- Vol. 116 (sp1) , 628-632
Beach Stabilization Effect of Asymmetric Ripple-Shaped Mat: A Numerical Study
Choi, J.G. and Cho, Y.J., 2023. Beach stabilization effect of an asymmetric ripple-shaped mat: A numerical study. In: Lee, J.L.; Lee, H.; Min, B.I.; Chang, J.-I.; Cho, G.T.; Yoon, J.-S., and Lee, J. (eds.), Multidisciplinary Approaches to Coastal and Marine Management. Journal of Coastal Research, Special Issue No. 116, pp. 628-632. Charlotte (North Carolina), ISSN 0749-0208. Structures deployed for beach stabilization should be designed such that these structures would not alter the year-long grand circulation process of sandy beaches over the course of which temporarily eroded beaches by harsh waves in rough sea are gradually restored. Nonetheless, massive structures such as LCB (Low-Crested Breakwater) are frequently deployed in coastal zone maintenance project run by the Korean Ministry of Ocean and Fisheries to mitigate beach erosions. In this rationale, the Asymmetric Ripple-shaped Mat (ARM) proposed by Irie et al. (1994) can be a viable alternative for beach stabilization due to its small size compared to the commonly used but inefficient massive LCB. The effectiveness of ARM depends on how effectively the eddies generated at the ARM's apex trap sand moving offshore during the run-down process. To test this hypothesis, the author conducted numerical simulations. The numerical results demonstrate that ARM effectively captures sediment through vortex shedding from its apex and returns it to the beach, which is considered the primary mechanism for ARM's beach stabilization effect.
- 1 February 2023
- Published by Coastal Education and Research Foundation in Journal of Coastal Research
- Vol. 116 (sp1) , 628-632
Beach Stabilization Effect of Asymmetric Ripple-Shaped Mat: A Numerical Study
Choi, J.G. and Cho, Y.J., 2023. Beach stabilization effect of an asymmetric ripple-shaped mat: A numerical study. In: Lee, J.L.; Lee, H.; Min, B.I.; Chang, J.-I.; Cho, G.T.; Yoon, J.-S., and Lee, J. (eds.), Multidisciplinary Approaches to Coastal and Marine Management. Journal of Coastal Research, Special Issue No. 116, pp. 628-632. Charlotte (North Carolina), ISSN 0749-0208. Structures deployed for beach stabilization should be designed such that these structures would not alter the year-long grand circulation process of sandy beaches over the course of which temporarily eroded beaches by harsh waves in rough sea are gradually restored. Nonetheless, massive structures such as LCB (Low-Crested Breakwater) are frequently deployed in coastal zone maintenance project run by the Korean Ministry of Ocean and Fisheries to mitigate beach erosions. In this rationale, the Asymmetric Ripple-shaped Mat (ARM) proposed by Irie et al. (1994) can be a viable alternative for beach stabilization due to its small size compared to the commonly used but inefficient massive LCB. The effectiveness of ARM depends on how effectively the eddies generated at the ARM's apex trap sand moving offshore during the run-down process. To test this hypothesis, the author conducted numerical simulations. The numerical results demonstrate that ARM effectively captures sediment through vortex shedding from its apex and returns it to the beach, which is considered the primary mechanism for ARM's beach stabilization effect.
- 1 February 2023
- Published by Coastal Education and Research Foundation in Journal of Coastal Research
- Vol. 116 (sp1) , 623-627
Reliability-Based Design of Vertical-Type Breakwaters Considering Varied Characteristics of Korean Marine Environment from Sea to Sea
Kim, Y.H. and Cho, Y.J., 2023. Reliability-based design of vertical-type breakwaters considering varied characteristics of Korean marine environment from sea to sea. In: Lee, J.L.; Lee, H.; Min, B.I.; Chang, J.-I.; Cho, G.T.; Yoon, J.-S., and Lee, J. (eds.), Multidisciplinary Approaches to Coastal and Marine Management. Journal of Coastal Research, Special Issue No. 116, pp. 623-627. Charlotte (North Carolina), ISSN 0749-0208. This study addresses the often-neglected aspect of wave period's inherent randomness and its significant engineering value in assessing wave- and lifting forces acting on a breaker. Probabilistic models for these forces were directly derived from long-term in-situ wave data, incorporating the diverse characteristics of the Korean marine environment that vary from sea to sea. With this probabilistic model, the authors conducted a reliability analysis of a vertical-type breaker in the seas off Haeundae, and Gunsan—locations near major ports in South and West Korea. This analysis takes into account the correlation between shore-directed wave- and lifting forces, a factor overlooked in previous studies on the reliability-based design of breakwaters. The results of the reliability analysis simulation can be summarized as follows: A notable improvement in agreement was observed when utilizing a three-parameter Weibull distribution as the underlying probability distribution. This highlights the structural differences in the Korean marine environment compared to Europe and the United States, with distinct characteristics manifesting in the probability coefficients. The introduction of a location coefficient in the three-parameter Weibull distribution offered valuable insights into the varying characteristics of the Korean marine environment from sea to sea. Consequently, this had a significant impact on the outcomes of the reliability analysis for the breakwater. The long-term in-situ wave data used in the study revealed an enhanced positive correlation between wave- and lifting forces, leading to an increased probability of failure for the breaker in all the sea areas considered in this study.
- 1 February 2023
- Published by Coastal Education and Research Foundation in Journal of Coastal Research
- Vol. 116 (sp1) , 623-627
Reliability-Based Design of Vertical-Type Breakwaters Considering Varied Characteristics of Korean Marine Environment from Sea to Sea
Kim, Y.H. and Cho, Y.J., 2023. Reliability-based design of vertical-type breakwaters considering varied characteristics of Korean marine environment from sea to sea. In: Lee, J.L.; Lee, H.; Min, B.I.; Chang, J.-I.; Cho, G.T.; Yoon, J.-S., and Lee, J. (eds.), Multidisciplinary Approaches to Coastal and Marine Management. Journal of Coastal Research, Special Issue No. 116, pp. 623-627. Charlotte (North Carolina), ISSN 0749-0208. This study addresses the often-neglected aspect of wave period's inherent randomness and its significant engineering value in assessing wave- and lifting forces acting on a breaker. Probabilistic models for these forces were directly derived from long-term in-situ wave data, incorporating the diverse characteristics of the Korean marine environment that vary from sea to sea. With this probabilistic model, the authors conducted a reliability analysis of a vertical-type breaker in the seas off Haeundae, and Gunsan—locations near major ports in South and West Korea. This analysis takes into account the correlation between shore-directed wave- and lifting forces, a factor overlooked in previous studies on the reliability-based design of breakwaters. The results of the reliability analysis simulation can be summarized as follows: A notable improvement in agreement was observed when utilizing a three-parameter Weibull distribution as the underlying probability distribution. This highlights the structural differences in the Korean marine environment compared to Europe and the United States, with distinct characteristics manifesting in the probability coefficients. The introduction of a location coefficient in the three-parameter Weibull distribution offered valuable insights into the varying characteristics of the Korean marine environment from sea to sea. Consequently, this had a significant impact on the outcomes of the reliability analysis for the breakwater. The long-term in-situ wave data used in the study revealed an enhanced positive correlation between wave- and lifting forces, leading to an increased probability of failure for the breaker in all the sea areas considered in this study.