Kerstin Glaser
Research Interests
Kerstin Glaser has a total of 9 co-authors. Here are the top co-authors by number of shared publications:
- André Zimmermann
Institute for Micro Integration (IFM), Faculty 7—Engineering Design, Production Engineering and Automotive Engineering, University of Stuttgart, Allmandring 9b, 70569 Stuttgart, Germany
2 shared publications Wolfgang Eberhardt
Hahn-Schickard, Stuttgart, Germany
2 shared publications- Daniel Juric
Hahn-Schickard, Allmandring 9b, 70569 Stuttgart, Germany
1 shared publication - Eugen Ermantraut
University of Stuttgart, Institute for Micro Integration (IFM), Allmandring 9b, Stuttgart, Germany
1 shared publication - Haiying Hao
University of Stuttgart, Institute for Micro Integration (IFM), Allmandring 9b, Stuttgart, Germany
1 shared publication - Jonas Jaeger
Hahn-Schickard, Allmandring 9b, 70569 Stuttgart, Germany
1 shared publication
Latest Publications
- 22 April 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Components, Packaging and Manufacturing Technology
- Vol. 12 (7) , 1232-1240
Contacting Inkjet-Printed Silver Structures and SMD by ICA and Solder
Digitally printed conductive structures often need to be electrically connected to batteries, microcontrollers, or other devices. A consensus of industry and research is that such hybrid printed electronics will play a major part in the future of printed electronics. To promote the technology of hybrid printed electronics, surface mount technologies for electronic components using isotropic conductive adhesives (ICAs) and low melting tin bismuth solders on inkjet-printed silver structures on injection molded liquid crystal polymer (LCP) substrates were investigated in this publication. The special needs for inkjet-printed electronics were considered as well as the reliability of assembled surface mounted devices (SMDs) and their failure mechanisms. Connected 0603 and 1206 SMD components achieved a characteristic fatigue life of more than 3500 cycles during thermal cycling at +125 °C/−40 °C and withstood over 1000 h under a damp-heat atmosphere of +85 °C/85% RH. The coefficient of thermal expansion (CTE) of the substrate and the selection of solder have major impacts on the reliability of the assemblies.
- 22 April 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Components, Packaging and Manufacturing Technology
- Vol. 12 (7) , 1232-1240
Contacting Inkjet-Printed Silver Structures and SMD by ICA and Solder
Digitally printed conductive structures often need to be electrically connected to batteries, microcontrollers, or other devices. A consensus of industry and research is that such hybrid printed electronics will play a major part in the future of printed electronics. To promote the technology of hybrid printed electronics, surface mount technologies for electronic components using isotropic conductive adhesives (ICAs) and low melting tin bismuth solders on inkjet-printed silver structures on injection molded liquid crystal polymer (LCP) substrates were investigated in this publication. The special needs for inkjet-printed electronics were considered as well as the reliability of assembled surface mounted devices (SMDs) and their failure mechanisms. Connected 0603 and 1206 SMD components achieved a characteristic fatigue life of more than 3500 cycles during thermal cycling at +125 °C/−40 °C and withstood over 1000 h under a damp-heat atmosphere of +85 °C/85% RH. The coefficient of thermal expansion (CTE) of the substrate and the selection of solder have major impacts on the reliability of the assemblies.
- 15 October 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Components, Packaging and Manufacturing Technology
- Vol. 10 (2) , 325-331
Laser Irradiation for Improving the Wetting of Nanoparticle Gold Inks for Printed Electronics
Digital printing technologies such as inkjet or Aerosol Jet are becoming increasingly interesting for the manufacturing of electronic devices. As a maskless and contactless process it offers the potential for low-cost deposition of functional materials onto flat, flexible or 3D-substrates. Common inks used for printed electronics are nanoparticle metal inks. Silver (Ag) is widely used because of its excellent conductivity, but also gold (Au) inks are of interest for several applications. By using nanoparticle inks it is possible to integrate conductive paths and sensors onto temperature sensitive substrate materials such as polymers. Polymers often need a pretreatment like a plasma treatment for improving the wetting. Plasma treatment usually changes the wetting behavior of the complete substrate surface. This could be critical for some applications, e.g. fluidic applications, where the original properties of the substrate should be kept. Low pressure plasma as a vacuum process is also difficult for implementation into an existing process. In this work laser irradiation for local improvement of wetting of an inkjet-printed gold ink on polymer substrates is investigated. The experiments show that laser irradiation is a very promising technique for the modification of polymer surfaces and suitable for inkjet printing nanoparticle inks on hydrophobic polymer surfaces. This offers new opportunities for printed electronics, which could be easily integrated into existing processes.
- 15 October 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Components, Packaging and Manufacturing Technology
- Vol. 10 (2) , 325-331
Laser Irradiation for Improving the Wetting of Nanoparticle Gold Inks for Printed Electronics
Digital printing technologies such as inkjet or Aerosol Jet are becoming increasingly interesting for the manufacturing of electronic devices. As a maskless and contactless process it offers the potential for low-cost deposition of functional materials onto flat, flexible or 3D-substrates. Common inks used for printed electronics are nanoparticle metal inks. Silver (Ag) is widely used because of its excellent conductivity, but also gold (Au) inks are of interest for several applications. By using nanoparticle inks it is possible to integrate conductive paths and sensors onto temperature sensitive substrate materials such as polymers. Polymers often need a pretreatment like a plasma treatment for improving the wetting. Plasma treatment usually changes the wetting behavior of the complete substrate surface. This could be critical for some applications, e.g. fluidic applications, where the original properties of the substrate should be kept. Low pressure plasma as a vacuum process is also difficult for implementation into an existing process. In this work laser irradiation for local improvement of wetting of an inkjet-printed gold ink on polymer substrates is investigated. The experiments show that laser irradiation is a very promising technique for the modification of polymer surfaces and suitable for inkjet printing nanoparticle inks on hydrophobic polymer surfaces. This offers new opportunities for printed electronics, which could be easily integrated into existing processes.