THTing-Chen Hu

Ting-Chen Hu

*This is an algorithmically generated author record based on publicly available information.

Ting-Chen Hu has a total of 54 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Diamondlike carbon thin film fabrication by plasma-enhanced chemical vapor deposition using CH4/N2 gas mixtures for use as a hard mask

    by J. Chong, R. Kopf, J. Kaufman, C. Xu, M. Cappuzzo, A. Tate, T. Hu, M. Earnshaw

    Diamondlike carbon (DLC) thin films have been deposited by plasma-enhanced chemical vapor deposition on silicon wafers with methane as a precursor gas and nitrogen as a balancing gas. The optimization of DLC deposition was carried out by varying the experimental parameters of chamber pressure, rf plasma power, and flow rate of the precursor gas. Energy-dispersive spectroscopy of the layers was used to determine the elemental analysis of the DLC thin films. Micro-Raman spectroscopy was used to determine the ratio of disordered graphite from the DLC in the films and to identify the optimal deposition conditions. The surface morphology for the optimum reaction condition was investigated by atomic force microscopy. Chemical stability tests have been performed systematically and have shown that the DLC films are chemically stable with common semiconductor processing chemicals. The films can be removed using oxygen plasma treatment. Ion-coupled plasma/reactive ion etching was performed on the films having almost vertical sidewalls with no trenching at the corners of the pattern. Our DLC films are, therefore, a great candidate as a hard mask for plasma etching.

  • High Power, Locker-Free, Compact Hybrid Integrated Tunable Laser

    by Mark Earnshaw, Cris Bolle, Tzu-Yung Huang, Rose Kopf, Mark A. Cappuzzo, Al Tate, Ting-Chen Hu, Ayed Sayem, David J. Apigo, Rishav Roy, et al.

    We demonstrate a compact, high power tunable laser based on free-space hybrid integration of indium phosphide gain chips with thermally tuned low loss silicon etalons. By optimization of filter fabrication and laser cavity design we achieve 17.6 dBm output power. Integrated thermal control elements enable accurate and wide tuning without the typical external optical feedback or wavelength locking components.


  • Optical Packaging of Surface-Normal Electroabsorption Modulator Arrays Using Passive Alignment

    by Stefano Grillanda, Nagesh Basavanhally, Ting-Chen Hu, Rick Papazian, Mark Cappuzzo, Alaric Tate, Mark Earnshaw, Rose Kopf, Flavio Pardo

    Surface-normal electroabsorption modulators (SNEAMs) are devices with unique characteristics, such as small size, wide bandwidth and polarization insensitive behavior; however, due to the surface-normal configuration and since they operate in reflection, it is challenging to package fiber arrays to SNEAM arrays with many channels. Here, we present a novel approach to package fiber arrays to SNEAM arrays based on passive alignment. We realize an expanded-beam, multi-channel, optical coupling scheme by using a prism lens array and a lens array in between a SNEAM array chip and a standard single mode fiber array. We use this approach to assemble a SNEAM array engine with 8 channels without any active optical alignment. We show that our SNEAM array engine has coupling loss from the fiber inputs to the SNEAMs ranging from 1.2 dB for the best channel to 1.7 dB for the worst channel. Also, we validate our passive alignment packaging scheme by modulating the channels at 25 Gbit/s NRZ-OOK and show that the fiber array is pluggable into the SNEAM array engine. Finally, our approach is independent of the specific SNEAM design, and potentially can be extended to other surface-normal devices, such as lasers or photodiodes.

  • Open Access

    Unveiling the origins of quasi-phase matching spectral imperfections in thin-film lithium niobate frequency doublers

    by Jie Zhao, Xiaoting Li, Ting-Chen Hu, Ayed Al Sayem, Haochuan Li, Alaric Tate, Kwangwoong Kim, Rose Kopf, Pouria Sanjari, Mark Earnshaw, et al.

    Thin-film lithium niobate (TFLN) based frequency doublers have widely been recognized as an essential component for both classical and quantum optical communications. Nonetheless, the efficiency (unit: %/W) of these devices is hindered by imperfections present in the quasi-phase matching (QPM) spectrum. In this report, we present a thorough experimental study of spectral imperfections in TFLN frequency doublers with varying lengths, ranging from 5 to 15 mm. A non-destructive diagnostic method based on scattered light imaging is proposed and employed to identify the waveguide sections and primary waveguide parameters contributing to the imperfections in the QPM spectrum. By applying this method, we obtain the evolution of the QPM spectrum along the waveguide’s length. Correlating this information with the measurements of the relevant geometric parameters along the waveguides suggests that the TFLN film thickness variation is the primary source for the measured spectral distortions. Furthermore, we numerically reproduce the QPM spectra with the mapped TFLN film thickness across the entire waveguiding regions. These findings align with and complement the simulation results from previous numerical studies, providing further evidence of the effectiveness of the developed diagnostic method. This comprehensive investigation offers valuable insights into the identification and mitigation of spectral imperfections in TFLN-based frequency doublers, paving the way for the realization of nonlinear optical devices with enhanced efficiency and improved spectral fidelity.


  • 4 × 53 Gbit/s Electro-Optic Engine With a Surface-Normal Electroabsorption Modulator Array

    by Stefano Grillanda, Cuong Tran, Di Che, Ting-Chen Hu, Nagesh Basavanhally, Rick Papazian, Rose Kopf, Alaric Tate, Mark Cappuzzo, Mark Earnshaw, et al.

    Short-reach communication systems use electro-optic transmission engines based on low-voltage, wide bandwidth modulators to achieve high capacity and low power operation. Here, we demonstrate, for the first time, integration of a 4-channel array of surface-normal electroabsorption modulators (SNEAMs) with a 4-channel array of electronic drivers with low output voltage (~1.25-1.45 Vpp). We use this 4-channel SNEAM-driver array electro-optic engine to demonstrate $4 \times 53$ Gbit/s non-return-to-zero on-off-keying transmission across up to 2 km of standard single mode fiber over a broad wavelength range (about 26 nm), the widest band of operation achieved with SNEAMs. Integration of a SNEAM array with a low output voltage driver array, a result that we achieved thanks to the use of SNEAMs that operate with low voltage swings, represents a fundamental milestone toward the realization of optical modules based on SNEAMs.


  • Photon-Pair Generation in Defect-Free Surface Modes

    by Matthew Weiner, Kw Kim, Ting-Chen Hu, Alexander Solntsev, Andrea Blanco-Redondo

    We experimentally demonstrate simultaneous generation and propagation of photon pairs in defect-free surface modes in an array of coupled sinusoidal waveguides. The measured biphoton correlations remain robust to tuning the curvature.

  • Power insensitive surface-normal electroabsorption modulators

    by Stefano Grillanda, Ting-Chen Hu, David Neilson, Mark Earnshaw

    Surface-normal electroabsorption modulators (SNEAMs) have unique electro-optic modulation properties; however, their behavior and performance at high light intensity is affected by thermal nonlinearities that take place in the modulator active volume. Here we show a novel, to the best of our knowledge, approach to make SNEAMs insensitive to optical power without the use of power-hungry heaters or feedback control systems. By passively compensating for the thermo-optic dependence of the SNEAM resonant cavity, we obtain an eight-fold reduction in the wavelength shift of the SNEAM response at 4 dBm of input power. Furthermore, we show no appreciable degradation in the SNEAM eye diagram at 25 Gbit/s, when the input power is increased up to 2 dBm, which is about four times higher than in conventional SNEAMs.


  • 107 Gb/s Ultra-High Speed, Surface-Normal Electroabsorption Modulator Devices

    by Stefano Grillanda, Ting-Chen Hu, David Neilson, Nagesh Basavanhally, Yee Low, Hugo Safar, Mark Cappuzzo, Rose Kopf, Alaric Tate, Gregory Raybon, et al.

    Short reach communication systems, such as datacenters and access networks, exhibit steep capacity growth and require opto-electronic technologies with small size, low complexity and low power consumption. Here, we demonstrate large-scale arrays of reflective surface normal electroabsorption modulators (SNEAMs). With very small active volumes, SNEAMs enable ultra-wide electro-optic bandwidth (>>65 GHz). We show modulation at 25 Gbit/s with 1 V $_{\text {pp}}$ drive voltage on packaged SNEAMs and ultra-high bit-rate modulation at 107 Gbit/s with bare chips. These modulators are polarization-independent and have very low total input/output coupling loss of 0.7 dB to single-mode-fibers. We package SNEAM arrays with arrayed waveguide gratings into wavelength division multiplexing transmitters. Due to their broad wavelength range of modulation, SNEAMs do not need power hungry wavelength tuning or locking systems. Future co-integration of SNEAM arrays with low-power electronic driver arrays will enable high-capacity, low-power electro-optic engines.