CCCarlos Camacho-Gómez

Carlos Camacho-Gómez

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Carlos Camacho-Gómez has a total of 9 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Design of a Multi-Band Microstrip Textile Patch Antenna for LTE and 5G Services with the CRO-SL Ensemble

    by Carlos Camacho-Gomez, Rocio Sanchez-Montero, Diego Martínez-Villanueva, Pablo-Luís López-Espí, Sancho Salcedo-Sanz

    A textile multi-band antenna for LTE and 5G communication services, composed by a rectangular microstrip patch, two concentric annular slots and a U-Shaped slot, is considered in this paper. In the ground plane, three sleeved meanders have been introduced to modify the surface current distribution, leading to a bandwidth improvement. The U-Shaped slot, the dual circular slots, and the meanders shape have been optimized by means of the Coral Reefs Optimization with Substrate Layer algorithm (CRO-SL). This population-based meta-heuristic approach is a kind of ensemble algorithm for optimization (multi-method), in which different search operators are considered within the algorithm. We show that the CRO-SL is able to obtain a robust multi-band textile antenna, including LTE and 5G frequency bands. For the optimization process, the CRO-SL is guided by means of a fitness function obtained after the antenna simulation by a specific simulation software for electromagnetic analysis in the high frequency range.


  • Open Access

    Optimal Microgrid Topology Design and Siting of Distributed Generation Sources Using a Multi-Objective Substrate Layer Coral Reefs Optimization Algorithm

    by Silvia Jiménez-Fernández, Carlos Camacho-Gómez, Ricardo Mallol-Poyato, Juan Carlos Fernández, Javier Del Ser, Antonio Portilla-Figueras, Sancho Salcedo-Sanz

    In this work, a problem of optimal placement of renewable generation and topology design for a Microgrid (MG) is tackled. The problem consists of determining the MG nodes where renewable energy generators must be optimally located and also the optimization of the MG topology design, i.e., deciding which nodes should be connected and deciding the lines’ optimal cross-sectional areas (CSA). For this purpose, a multi-objective optimization with two conflicting objectives has been used, utilizing the cost of the lines, C, higher as the lines’ CSA increases, and the MG energy losses, E, lower as the lines’ CSA increases. To characterize generators and loads connected to the nodes, on-site monitored annual energy generation and consumption profiles have been considered. Optimization has been carried out by using a novel multi-objective algorithm, the Multi-objective Substrate Layers Coral Reefs Optimization algorithm (Mo-SL-CRO). The performance of the proposed approach has been tested in a realistic simulation of a MG with 12 nodes, considering photovoltaic generators and micro-wind turbines as renewable energy generators, as well as the consumption loads from different commercial and industrial sites. We show that the proposed Mo-SL-CRO is able to solve the problem providing good solutions, better than other well-known multi-objective optimization techniques, such as NSGA-II or multi-objective Harmony Search algorithm.


  • Open Access

    Optimal Design of a Planar Textile Antenna for Industrial Scientific Medical (ISM) 2.4 GHz Wireless Body Area Networks (WBAN) with the CRO-SL Algorithm

    by Rocío Sánchez-Montero, Carlos Camacho-Gómez, Pablo-Luís López-Espí, Sancho Salcedo-Sanz

    This paper proposes a low-profile textile-modified meander line Inverted-F Antenna (IFA) with variable width and spacing meanders, for Industrial Scientific Medical (ISM) 2.4-GHz Wireless Body Area Networks (WBAN), optimized with a novel metaheuristic algorithm. Specifically, a metaheuristic known as Coral Reefs Optimization with Substrate Layer (CRO-SL) is used to obtain an optimal antenna for sensor systems, which allows covering properly and resiliently the 2.4–2.45-GHz industrial scientific medical bandwidth. Flexible pad foam has been used to make the designed prototype with a 1.1-mm thickness. We have used a version of the algorithm that is able to combine different searching operators within a single population of solutions. This approach is ideal to deal with hard optimization problems, such as the design of the proposed meander line IFA. During the optimization phase with the CRO-SL, the proposed antenna has been simulated using CST Microwave Studio software, linked to the CRO-SL by means of MATLAB implementation and Visual Basic Applications (VBA) code. We fully describe the antenna design process, the adaptation of the CRO-SL approach to this problem and several practical aspects of the optimization and details on the algorithm’s performance. To validate the simulation results, we have constructed and measured two prototypes of the antenna, designed with the proposed algorithm. Several practical aspects such as sensitivity during the antenna manufacturing or the agreement between the simulated and constructed antenna are also detailed in the paper.