Shiqiao Tian
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Shiqiao Tian has a total of 39 co-authors. Here are the top co-authors by number of shared publications:
- Chunyu Xiao
Institute of Rail Transit, Tongji University, Shanghai, China
10 shared publications - Xiangping Luo
Institute of Rail Transit, Tongji University, Shanghai, China
10 shared publications - Jing Zeng
Southwest Jiaotong University
5 shared publications - Lai Wei
Southwest Jiaotong University
5 shared publications Jinsong Zhou
Tong Ji University
4 shared publications- Jinsong Zhou
Tongji University
4 shared publications
Latest Publications
- 10 October 2026
- Published by SAGE Publications in Journal of Vibration and Control
Analysis of abnormal low-frequency lateral carbody sway in metro vehicles induced by alternating side wear of rails
Low-frequency carbody sway in the range of 2–3 Hz is a recurrent abnormal vibration phenomenon in metro systems, degrading ride comfort and operational stability. Field observations indicate that this vibration is concentrated in specific line sections and is closely associated with deterministic geometric excitation caused by alternating side wear of rails, hereafter termed rail alternate side wear, in which lateral wear alternates periodically between the left and right rails. The excitation mechanism of wear-induced low-frequency carbody sway is investigated through an integrated approach combining field measurements, wheel and rail profile inspection, vehicle–track coupled multibody dynamics simulation, and wear-evolution analysis. Measurements show that the abnormal vibration is dominated by a coupled lateral-roll motion of the carbody with a nearly constant dominant frequency of approximately 2.5 Hz. A mileage-dependent generalised lateral irregularity is reconstructed from the measured wheel and rail profiles to quantify the equivalent periodic geometric excitation induced by rail alternate side wear. Numerical simulations incorporating mileage-dependent wheel–rail contact conditions reasonably reproduce the dominant vibration characteristics observed in the field tests and demonstrate that low equivalent conicity and insufficient secondary lateral damping significantly promote frequency locking and response amplification. By linking the measured wear morphology, mileage-dependent wheel–rail contact geometry, vehicle modal response, and iterative wear evolution, the results clarify the feedback interaction between rail alternate side wear and low-frequency carbody sway, and indicate that coordinated control of rail wear and vehicle suspension parameters can mitigate this abnormal response.
- 10 October 2026
- Published by SAGE Publications in Journal of Vibration and Control
Analysis of abnormal low-frequency lateral carbody sway in metro vehicles induced by alternating side wear of rails
Low-frequency carbody sway in the range of 2–3 Hz is a recurrent abnormal vibration phenomenon in metro systems, degrading ride comfort and operational stability. Field observations indicate that this vibration is concentrated in specific line sections and is closely associated with deterministic geometric excitation caused by alternating side wear of rails, hereafter termed rail alternate side wear, in which lateral wear alternates periodically between the left and right rails. The excitation mechanism of wear-induced low-frequency carbody sway is investigated through an integrated approach combining field measurements, wheel and rail profile inspection, vehicle–track coupled multibody dynamics simulation, and wear-evolution analysis. Measurements show that the abnormal vibration is dominated by a coupled lateral-roll motion of the carbody with a nearly constant dominant frequency of approximately 2.5 Hz. A mileage-dependent generalised lateral irregularity is reconstructed from the measured wheel and rail profiles to quantify the equivalent periodic geometric excitation induced by rail alternate side wear. Numerical simulations incorporating mileage-dependent wheel–rail contact conditions reasonably reproduce the dominant vibration characteristics observed in the field tests and demonstrate that low equivalent conicity and insufficient secondary lateral damping significantly promote frequency locking and response amplification. By linking the measured wear morphology, mileage-dependent wheel–rail contact geometry, vehicle modal response, and iterative wear evolution, the results clarify the feedback interaction between rail alternate side wear and low-frequency carbody sway, and indicate that coordinated control of rail wear and vehicle suspension parameters can mitigate this abnormal response.
- 23 August 2026
- Published by SAGE Publications in Journal of Vibration and Control
Experimental and numerical analysis of vortex-induced vibrations of a passenger train in curved tunnels
Train vortex-induced vibrations in tunnels pose significant challenges to the passenger ride comfort. This study investigates train vortex-induced vibrations within tunnels through an integrated approach combining full-scale field experiments and numerical simulations. Firstly, the field tests are conducted to reveal the vortex-induced vibrations of a passenger train traversing tunnel clusters. Subsequently, a coupled train–tunnel dynamic model is established via computational fluid dynamics and multibody dynamics, where unsteady aerodynamic loads are computed and fed into the vehicle dynamics simulation for validation. The results indicate that unsteady yaw and lateral aerodynamic forces, along with centrifugal effects, serve as the primary excitations for carbody lateral oscillations in curved sections. Furthermore, parametric studies are performed to evaluate the influence of suspension components, leading to a field-validated mitigation strategy.
- 23 August 2026
- Published by SAGE Publications in Journal of Vibration and Control
Experimental and numerical analysis of vortex-induced vibrations of a passenger train in curved tunnels
Train vortex-induced vibrations in tunnels pose significant challenges to the passenger ride comfort. This study investigates train vortex-induced vibrations within tunnels through an integrated approach combining full-scale field experiments and numerical simulations. Firstly, the field tests are conducted to reveal the vortex-induced vibrations of a passenger train traversing tunnel clusters. Subsequently, a coupled train–tunnel dynamic model is established via computational fluid dynamics and multibody dynamics, where unsteady aerodynamic loads are computed and fed into the vehicle dynamics simulation for validation. The results indicate that unsteady yaw and lateral aerodynamic forces, along with centrifugal effects, serve as the primary excitations for carbody lateral oscillations in curved sections. Furthermore, parametric studies are performed to evaluate the influence of suspension components, leading to a field-validated mitigation strategy.
- 20 May 2026
- Published by SAGE Publications in Journal of Vibration and Control
Dynamic interaction between straddle monorail bogies and elastic track beams: Shimmy onset, growth, and suppression
This study investigates the shimmy dynamics of straddle-type monorail bogies under elastic coupling with the track beam. A dynamic model is developed incorporating the bogie, rubber tires, and an elastic track beam, capturing nonlinear lateral forces at the wheel–rail interface. Comparative simulations of standalone and bogie–bridge–coupled (BBC) systems reveal that nonlinear lateral sliding forces drive coupled yaw–roll shimmy, with frequency locking at the yaw mode of the bogie. Track beam elasticity shifts system stability boundaries and increases the critical damping required for stability, highlighting the effectiveness of yaw damping enhancement. The absence of preload significantly enlarges limit cycles, degrading dynamic performance. The results provide guidance for suspension tuning and elastic track design in monorail systems.
- 20 May 2026
- Published by SAGE Publications in Journal of Vibration and Control
Dynamic interaction between straddle monorail bogies and elastic track beams: Shimmy onset, growth, and suppression
This study investigates the shimmy dynamics of straddle-type monorail bogies under elastic coupling with the track beam. A dynamic model is developed incorporating the bogie, rubber tires, and an elastic track beam, capturing nonlinear lateral forces at the wheel–rail interface. Comparative simulations of standalone and bogie–bridge–coupled (BBC) systems reveal that nonlinear lateral sliding forces drive coupled yaw–roll shimmy, with frequency locking at the yaw mode of the bogie. Track beam elasticity shifts system stability boundaries and increases the critical damping required for stability, highlighting the effectiveness of yaw damping enhancement. The absence of preload significantly enlarges limit cycles, degrading dynamic performance. The results provide guidance for suspension tuning and elastic track design in monorail systems.
- 11 April 2026
- Published by World Scientific Pub Co Pte Ltd in International Journal of Structural Stability and Dynamics
Sound Transmission Loss Analysis and Improvement of Honeycomb Sandwich Panels Under General Constraint Boundaries
Honeycomb sandwich panels (HSPs) are extensively applied in numerous industrial fields due to their advantages such as low density and high strength. In scenarios like aerospace and rail transit, where noise control requirements are stringent, the sound insulation performance of HSPs has garnered significant attention. To establish a vibro-acoustic model of HSPs under general boundary constraints and clarify the effects of structural parameters and boundary conditions on their sound transmission loss (STL), this paper derives the energy functional of HSPs based on the first-order shear deformation theory (FSDT) and the equivalent mechanical model of honeycombs. The governing equations of the system are established via Hamilton’s principle, and a semi-analytical solution is obtained using the improved Ritz method. Distinguished from traditional approaches, this paper employs the virtual spring technique to simulate general elastic boundary constraints, enabling precise modeling of various complex engineering scenarios. Simultaneously, a modified shear correction factor is introduced to replace the conventional fixed value, thereby improving calculation accuracy for soft-core structures. The accuracy of the proposed model is further validated through numerical examples. Through parametric analysis, the influence of boundary stiffness, honeycomb wall thickness, cell side length, and core height on STL is elucidated. Finally, to address the poor low-frequency sound insulation, an electromagnetic shunt damping strategy based on a negative inductance negative resistance (NINR) circuit is proposed to enhance the insulation potential in the resonance region. By optimizing the relevant circuit parameters, the sound insulation performance of the panel is significantly improved, and the effective insulation bandwidth is broadened.
- 11 April 2026
- Published by World Scientific Pub Co Pte Ltd in International Journal of Structural Stability and Dynamics
Sound Transmission Loss Analysis and Improvement of Honeycomb Sandwich Panels Under General Constraint Boundaries
Honeycomb sandwich panels (HSPs) are extensively applied in numerous industrial fields due to their advantages such as low density and high strength. In scenarios like aerospace and rail transit, where noise control requirements are stringent, the sound insulation performance of HSPs has garnered significant attention. To establish a vibro-acoustic model of HSPs under general boundary constraints and clarify the effects of structural parameters and boundary conditions on their sound transmission loss (STL), this paper derives the energy functional of HSPs based on the first-order shear deformation theory (FSDT) and the equivalent mechanical model of honeycombs. The governing equations of the system are established via Hamilton’s principle, and a semi-analytical solution is obtained using the improved Ritz method. Distinguished from traditional approaches, this paper employs the virtual spring technique to simulate general elastic boundary constraints, enabling precise modeling of various complex engineering scenarios. Simultaneously, a modified shear correction factor is introduced to replace the conventional fixed value, thereby improving calculation accuracy for soft-core structures. The accuracy of the proposed model is further validated through numerical examples. Through parametric analysis, the influence of boundary stiffness, honeycomb wall thickness, cell side length, and core height on STL is elucidated. Finally, to address the poor low-frequency sound insulation, an electromagnetic shunt damping strategy based on a negative inductance negative resistance (NINR) circuit is proposed to enhance the insulation potential in the resonance region. By optimizing the relevant circuit parameters, the sound insulation performance of the panel is significantly improved, and the effective insulation bandwidth is broadened.
- 1 October 2025
- Published by Springer Nature in Nonlinear Dynamics
- Vol. 113 (22) , 31255-31278
Limit cycle characterization of shimmy in pneumatic-rubber-tired rail vehicle
- 1 October 2025
- Published by Springer Nature in Nonlinear Dynamics
- Vol. 113 (22) , 31255-31278
Limit cycle characterization of shimmy in pneumatic-rubber-tired rail vehicle
- 29 August 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Vehicular Technology
- Vol. 75 (2) , 2267-2279
Active Steering Control Strategy and Fault-Tolerant Method for Railway Vehicles Based on Bogie Active Yaw Control
A co-simulation model incorporating bogie active yaw control (BAYC) was initially developed using Simpack and Simulink. Subsequent investigation into the active steering control mechanism of railway vehicles, facilitated by this model, delineated the distinctions and interconnections between the two targets of mitigating wheel-rail wear and balancing wheelset lateral force. This elucidation aimed to clarify the preferred control target of the BAYC system. To realize this target, an evaluation of the merits and demerits of two control strategies was conducted across various dimensions. The control effects, control efforts, stability, robustness, and vibration transmission characteristics of different control strategies were then demonstrated. Additionally, discussions ensued concerning the alignment between actuator drifting mode characteristics and the running safety of vehicle, thus furnishing an engineering framework for the implementation of passive fault-tolerant control (FTC). Ultimately, the active FTC following actuator failure was effectuated leveraging the over-drive characteristics inherent to the BAYC system.
- 29 August 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Vehicular Technology
- Vol. 75 (2) , 2267-2279
Active Steering Control Strategy and Fault-Tolerant Method for Railway Vehicles Based on Bogie Active Yaw Control
A co-simulation model incorporating bogie active yaw control (BAYC) was initially developed using Simpack and Simulink. Subsequent investigation into the active steering control mechanism of railway vehicles, facilitated by this model, delineated the distinctions and interconnections between the two targets of mitigating wheel-rail wear and balancing wheelset lateral force. This elucidation aimed to clarify the preferred control target of the BAYC system. To realize this target, an evaluation of the merits and demerits of two control strategies was conducted across various dimensions. The control effects, control efforts, stability, robustness, and vibration transmission characteristics of different control strategies were then demonstrated. Additionally, discussions ensued concerning the alignment between actuator drifting mode characteristics and the running safety of vehicle, thus furnishing an engineering framework for the implementation of passive fault-tolerant control (FTC). Ultimately, the active FTC following actuator failure was effectuated leveraging the over-drive characteristics inherent to the BAYC system.
- 26 June 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Vehicular Technology
- Vol. 74 (11) , 17109-17122
Robust State Estimation Method for Nonlinear Active Steering Bogie Based on Distributed Actuation-Sensing Configuration
Wheel-rail force and state estimation constitute a pivotal and intricate issue within the realm of rail vehicle dynamics. To address this problem, an innovative approach has been proposed in which measured wheel–rail forces are used to correct bogie state estimations. The distributed actuation–sensing configuration of the active steering bogie provides a robust hardware foundation for implementing this concept. The primary contribution of this study is the development of a technical method to realize the proposed innovation based on this hardware architecture. Initially, the force and moment equilibrium equations of the bogie are formulated, facilitating the realization of measuring wheel-rail longitudinal force and wheelset lateral force based on actuator displacement and force feedback. Subsequent steps involve the establishment of an active steering bogie model, design of a Kalman filter-based bogie state estimation scheme, proposition of a method for real-time calculation of pure roll line position, and introduction of measurement results pertaining to wheel-rail force. These elements collectively constitute a bogie state observer characterized by a dual-observer structure, enabling the estimation of the nonlinear bogie state. Findings indicate that the incorporation of wheel-rail force not only mitigates the error stemming from the nonlinearity of the wheel-rail contact relationship on estimated values but also enhances the parameter robustness of the state estimation.
- 26 June 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Vehicular Technology
- Vol. 74 (11) , 17109-17122
Robust State Estimation Method for Nonlinear Active Steering Bogie Based on Distributed Actuation-Sensing Configuration
Wheel-rail force and state estimation constitute a pivotal and intricate issue within the realm of rail vehicle dynamics. To address this problem, an innovative approach has been proposed in which measured wheel–rail forces are used to correct bogie state estimations. The distributed actuation–sensing configuration of the active steering bogie provides a robust hardware foundation for implementing this concept. The primary contribution of this study is the development of a technical method to realize the proposed innovation based on this hardware architecture. Initially, the force and moment equilibrium equations of the bogie are formulated, facilitating the realization of measuring wheel-rail longitudinal force and wheelset lateral force based on actuator displacement and force feedback. Subsequent steps involve the establishment of an active steering bogie model, design of a Kalman filter-based bogie state estimation scheme, proposition of a method for real-time calculation of pure roll line position, and introduction of measurement results pertaining to wheel-rail force. These elements collectively constitute a bogie state observer characterized by a dual-observer structure, enabling the estimation of the nonlinear bogie state. Findings indicate that the incorporation of wheel-rail force not only mitigates the error stemming from the nonlinearity of the wheel-rail contact relationship on estimated values but also enhances the parameter robustness of the state estimation.
- 1 May 2025
- Published by Elsevier in Journal of Sound and Vibration
- Vol. 614
Shimmy mechanics and nonlinear vibration characteristics of monorail vehicle
- 1 May 2025
- Published by Elsevier in Journal of Sound and Vibration
- Vol. 614
Shimmy mechanics and nonlinear vibration characteristics of monorail vehicle
- Open Access
- 1 January 2025
- Published by Chinese Journal of Mechanical Engineering in Journal of Mechanical Engineering
- Vol. 61 (22) , 189-197
Comparative Assessment of Curving Performance in Active Steering and Forced Steering Bogies
- 1 January 2025
- Published by Chinese Journal of Mechanical Engineering in Journal of Mechanical Engineering
- Vol. 61 (22) , 189-197
Open AccessComparative Assessment of Curving Performance in Active Steering and Forced Steering Bogies
- 1 January 2025
- Published by Chinese Journal of Mechanical Engineering in Journal of Mechanical Engineering
- Vol. 61 (12) , 182-190
Influence of Fail-safe Behaviour of Active Steering Control on the Running Safety of Rail Vehicle
- 1 January 2025
- Published by Chinese Journal of Mechanical Engineering in Journal of Mechanical Engineering
- Vol. 61 (12) , 182-190
Influence of Fail-safe Behaviour of Active Steering Control on the Running Safety of Rail Vehicle