Yijun Du
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Yijun Du has a total of 26 co-authors. Here are the top co-authors by number of shared publications:
- Linjun Shao
Zhejiang Key Laboratory of Alternative Technologies for Fine Chemicals Process, Shaoxing University, Shaoxing, People’s Republic of China
4 shared publications - Chenze Qi
School of Chemistry and Chemical Engineering, Zhejiang Key Laboratory of Alternative Technologies for Fine Chemicals Process Shaoxing University Shaoxing China
3 shared publications Junjian Zeng
3 shared publicationsBenben Zhang
Zhejiang Key Laboratory of Alternative Technologies for Fine Chemicals Process Shaoxing University Zhejiang China
1 shared publicationChenze Qi
Zhejiang Key Laboratory of Alternative Technologies for Fine Chemicals Process Shaoxing University Zhejiang China
1 shared publication- Danning Gao
Zhejiang Key Laboratory of Alternative Technologies for Fine Chemicals Process Shaoxing University Shaoxing China
1 shared publication
Latest Publications
- Open Access
- 18 August 2026
- Published by Elsevier in SSRN Electronic Journal
Revisiting Mechanism of O 2 and CO 2 Reduction on Cu-N-C Single-Atom Catalysts: The Overlooked Role of Oxygen in the Graphene Lattice
Cu-N-C single-atom catalysts (SACs) are experimentally confirmed to exhibit superior catalytic performance for the oxygen reduction reaction (ORR) and the carbon dioxide reduction reaction (CO2RR). Although the CuN4 moiety is widely accepted as the active site, it shows relatively poor catalytic performance. To reconcile this discrepancy, a modified coordination environment around the CuN4 site is often considered as a direct evidence. It's generally believed that CuN4 converts to a CuN3 configuration due to the hydrogenation of one of the four nitrogen atoms (forming CuN4(H)), which leads to the presence of low oxidation state of Cu+. However, our systematic density functional theory calculations reveal that the CuN4(H) model cannot be utilized to explain Cu⁺, and more importantly, account for the superior ORR performance of Cu-N-C SACs. In this regard, we propose a new strategy for modeling the active sites in Cu-N-C SACs, incorporating realistic structural features associated with unavoidable but overlooked oxygen-bearing defects near the CuN4 moiety. This new model enables us to rationalize the experimental ORR performance of Cu-N-C and the concurrent changes in the oxidation state of the Cu center. Based on this improved understanding of the active sites, we revisit the mechanism of CO2RR catalyzed by Cu-N-C SACs.
- 18 August 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessRevisiting Mechanism of O 2 and CO 2 Reduction on Cu-N-C Single-Atom Catalysts: The Overlooked Role of Oxygen in the Graphene Lattice
Cu-N-C single-atom catalysts (SACs) are experimentally confirmed to exhibit superior catalytic performance for the oxygen reduction reaction (ORR) and the carbon dioxide reduction reaction (CO2RR). Although the CuN4 moiety is widely accepted as the active site, it shows relatively poor catalytic performance. To reconcile this discrepancy, a modified coordination environment around the CuN4 site is often considered as a direct evidence. It's generally believed that CuN4 converts to a CuN3 configuration due to the hydrogenation of one of the four nitrogen atoms (forming CuN4(H)), which leads to the presence of low oxidation state of Cu+. However, our systematic density functional theory calculations reveal that the CuN4(H) model cannot be utilized to explain Cu⁺, and more importantly, account for the superior ORR performance of Cu-N-C SACs. In this regard, we propose a new strategy for modeling the active sites in Cu-N-C SACs, incorporating realistic structural features associated with unavoidable but overlooked oxygen-bearing defects near the CuN4 moiety. This new model enables us to rationalize the experimental ORR performance of Cu-N-C and the concurrent changes in the oxidation state of the Cu center. Based on this improved understanding of the active sites, we revisit the mechanism of CO2RR catalyzed by Cu-N-C SACs.
- 19 March 2026
- Published by Wiley in Environmental Progress & Sustainable Energy
- Vol. 45 (3) , e70397
Review on the optimization of iron‐based catalysts for Fenton‐like reactions through structural and dimensional engineering
Iron‐based nanoparticles (INPs) are prominent heterogeneous catalysts for H 2 O 2 activation in advanced oxidation processes (AOPs) for wastewater treatment. Their performance is optimized through strategies targeting the Fe 3+ /Fe 2+ cycle, including: (i) composition and defect regulation (e.g., doping/heterojunctions and oxygen‐vacancy engineering), (ii) morphological control of iron oxides, zero‐valent iron, and Fe‐MOFs, (iii) substrate design using one‐, two‐, and three‐dimensional supports, and (iv) spatial confinement in 1D/2D/3D architectures. This review summarizes recent advances in these structural regulation strategies for INPs, focusing on catalytic activity, stability, and reusability. The modulation of local electronic structures, adsorption/transport, and oxidant activation to enhance these properties is discussed. For comparative analysis, we report a single benchmark—the apparent initial molar volumetric rate (r 0,molar = k obs × C 0,molar )—along with literature removal data. Practical considerations, including Fe‐site regeneration, Fe‐leaching control, and long‐term operation, are also addressed to contextualize the deployment of INP‐based catalysts. Future research should focus on achieving durable Fe‐valence cycling, improving H 2 O 2 utilization, and developing scalable, low‐cost synthesis methods to advance the application of INPs in water pollution control.
- 19 March 2026
- Published by Wiley in Environmental Progress & Sustainable Energy
- Vol. 45 (3) , e70397
Review on the optimization of iron‐based catalysts for Fenton‐like reactions through structural and dimensional engineering
Iron‐based nanoparticles (INPs) are prominent heterogeneous catalysts for H 2 O 2 activation in advanced oxidation processes (AOPs) for wastewater treatment. Their performance is optimized through strategies targeting the Fe 3+ /Fe 2+ cycle, including: (i) composition and defect regulation (e.g., doping/heterojunctions and oxygen‐vacancy engineering), (ii) morphological control of iron oxides, zero‐valent iron, and Fe‐MOFs, (iii) substrate design using one‐, two‐, and three‐dimensional supports, and (iv) spatial confinement in 1D/2D/3D architectures. This review summarizes recent advances in these structural regulation strategies for INPs, focusing on catalytic activity, stability, and reusability. The modulation of local electronic structures, adsorption/transport, and oxidant activation to enhance these properties is discussed. For comparative analysis, we report a single benchmark—the apparent initial molar volumetric rate (r 0,molar = k obs × C 0,molar )—along with literature removal data. Practical considerations, including Fe‐site regeneration, Fe‐leaching control, and long‐term operation, are also addressed to contextualize the deployment of INP‐based catalysts. Future research should focus on achieving durable Fe‐valence cycling, improving H 2 O 2 utilization, and developing scalable, low‐cost synthesis methods to advance the application of INPs in water pollution control.
- 30 October 2024
- Published by Elsevier in Journal of Colloid and Interface Science
- Vol. 679 (Pt B) , 883-892
Polymerization-induced highly brilliant and color-recordable mechanochromic photonic gels for ink-free patterning
- 30 October 2024
- Published by Elsevier in Journal of Colloid and Interface Science
- Vol. 679 (Pt B) , 883-892
Polymerization-induced highly brilliant and color-recordable mechanochromic photonic gels for ink-free patterning
- Open Access
- 22 October 2024
- Published by Wiley in Advanced Energy and Sustainability Research
- Vol. 6 (3)
High‐Performance Na‐Storage and Sodiation Behavior Identification in Cellulose‐Derived Hard Carbon by High‐Resolution Element Mapping Microscopy
Nowadays, hard carbon is one of the most promising anode materials for sodium‐ion batteries. However, the Na‐storage performance of hard carbon varies for different precursors and synthetic processes due to disparities in the dopant content, dimensions, and categories of defects, graphitic domains, which lead to controversial explanations for the energy storage mechanism. Herein, self‐freestanding membrane of cellulose‐derived carbon fibers is presented, delivering a reversible Na‐storage capacity of 330 mAh g−1 at 50 mA g−1 due to abundant ordered graphitic zones with enlarged interlayer spacings around 0.39 ± 0.03 nm. Benefiting from a robust solid electrolyte interphase layer rich in NaF nanocrystals, the membrane also holds a superior rate capability of 100 mAh g−1 at 2 A g−1 and long‐term cycling stability with capacity retention of 82.6% at 1.5 A g−1 for 4000 cycles. A clear sodiation behavior of Na+ intercalation into enlarged carbon graphitic layers at the slope step above 0.10 V and Na cluster evolution in the micropores at the plateau step around 0.01–0.10 V is disclosed by high‐resolution element mapping microscopy, different from the accepted mechanism of Na+ intercalation into graphitic layers at the plateau step.
- 22 October 2024
- Published by Wiley in Advanced Energy and Sustainability Research
- Vol. 6 (3)
Open AccessHigh‐Performance Na‐Storage and Sodiation Behavior Identification in Cellulose‐Derived Hard Carbon by High‐Resolution Element Mapping Microscopy
Nowadays, hard carbon is one of the most promising anode materials for sodium‐ion batteries. However, the Na‐storage performance of hard carbon varies for different precursors and synthetic processes due to disparities in the dopant content, dimensions, and categories of defects, graphitic domains, which lead to controversial explanations for the energy storage mechanism. Herein, self‐freestanding membrane of cellulose‐derived carbon fibers is presented, delivering a reversible Na‐storage capacity of 330 mAh g−1 at 50 mA g−1 due to abundant ordered graphitic zones with enlarged interlayer spacings around 0.39 ± 0.03 nm. Benefiting from a robust solid electrolyte interphase layer rich in NaF nanocrystals, the membrane also holds a superior rate capability of 100 mAh g−1 at 2 A g−1 and long‐term cycling stability with capacity retention of 82.6% at 1.5 A g−1 for 4000 cycles. A clear sodiation behavior of Na+ intercalation into enlarged carbon graphitic layers at the slope step above 0.10 V and Na cluster evolution in the micropores at the plateau step around 0.01–0.10 V is disclosed by high‐resolution element mapping microscopy, different from the accepted mechanism of Na+ intercalation into graphitic layers at the plateau step.
- 8 March 2022
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 139 (23)
Ultrafine palladium nanoparticles confined in polydopamine functionalized chlorinated poly(vinyl chloride) nanofibers for Heck reaction
Polydopamine has been considered as the adhesive of mussels to solid surfaces in biological systems. The development of dopamine and polydopamine functionalized nanofibrous materials is highly desirable for catalysis, drug delivery and tissue engineering. Polydopamine induced surface functionalized solid matrices have been proved to be efficient supporting materials for palladium nanoparticles. In this study, the dopamine monomers were first incorporated into the Pd2+/chlorated poly(vinyl chloride) (CPVC) composite nanofibers by electrospinning and then polymerized in basic and reductive solution at elevated temperature to prepare stable polydopamine functionalized CPVC supported palladium composite nanofibers. Scanning electron microscopy images show that uniform and smooth nanofibers with diameter of ~325 nm have been prepared and high temperature can promote their solvent resistance. Fourier transformed infrared and UV–visible (UV–Vis) spectra confirmed the synthesis of polydopamine inside the composite nanofibers. The ultrafine palladium nanoparticles inside the composite nanofibers were characterized by X‐ray spectroscopy and transmission electron microscopy. Although these palladium nanoparticles were confined inside the nanofibers, they exhibited excellent catalytic efficiency for the Heck reactions of aryl iodides with alkenes. Moreover, this novel fibrous catalyst could be easily recovered by simple filtration and reused at least five times without obviously loss of initial catalytic activity. In all, we have developed a distinctive way for the synthesis of polydopamine functionalized polymeric materials for catalysis and other applications.
- 8 March 2022
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 139 (23)
Ultrafine palladium nanoparticles confined in polydopamine functionalized chlorinated poly(vinyl chloride) nanofibers for Heck reaction
Polydopamine has been considered as the adhesive of mussels to solid surfaces in biological systems. The development of dopamine and polydopamine functionalized nanofibrous materials is highly desirable for catalysis, drug delivery and tissue engineering. Polydopamine induced surface functionalized solid matrices have been proved to be efficient supporting materials for palladium nanoparticles. In this study, the dopamine monomers were first incorporated into the Pd2+/chlorated poly(vinyl chloride) (CPVC) composite nanofibers by electrospinning and then polymerized in basic and reductive solution at elevated temperature to prepare stable polydopamine functionalized CPVC supported palladium composite nanofibers. Scanning electron microscopy images show that uniform and smooth nanofibers with diameter of ~325 nm have been prepared and high temperature can promote their solvent resistance. Fourier transformed infrared and UV–visible (UV–Vis) spectra confirmed the synthesis of polydopamine inside the composite nanofibers. The ultrafine palladium nanoparticles inside the composite nanofibers were characterized by X‐ray spectroscopy and transmission electron microscopy. Although these palladium nanoparticles were confined inside the nanofibers, they exhibited excellent catalytic efficiency for the Heck reactions of aryl iodides with alkenes. Moreover, this novel fibrous catalyst could be easily recovered by simple filtration and reused at least five times without obviously loss of initial catalytic activity. In all, we have developed a distinctive way for the synthesis of polydopamine functionalized polymeric materials for catalysis and other applications.
- 13 September 2021
- Published by Wiley in Applied Organometallic Chemistry
- Vol. 35 (12) , e6445
Palladium nanoparticles encapsulated in polyimide nanofibers: An efficient and recyclable catalyst for coupling reaction
In this study, palladium‐encapsulated poly(amic acid) (Pd@PAA) nanofibers were prepared by electrospinning, followed by thermal imidization to synthesize palladium‐encapsulated polyimide (Pd@PI) nanofibers. Scanning electron microscopy (SEM) images confirmed the preparation of uniform and smooth Pd@PAA and Pd@PI nanofibers. Thermogravimetric analysis (TGA) results reveal that the Pd@PI nanofibers possessed excellent thermal stability. The dispersion of palladium nanoparticles in the polyimide nanofibers was characterized by transmission electron microscopy (TEM) and X‐ray diffraction (XRD). The catalysis results show that this Pd@PI fibrous catalyst was very efficient to catalyze the cross‐coupling reactions of aromatic iodides with n‐butyl acrylate (Heck reaction) or phenylboronic acid derivatives (Suzuki reaction) to afford the desired products in good to excellent yields. Moreover, the Pd@PI catalyst could be easily separated and recovered from the reaction mixture by simple filtration due to the regular fibrous structure and reused for 10 times for both Heck and Suzuki reactions without obvious loss of its initial catalytic activity. Thus, the Pd@PI nanofiber catalyst holds great potential in chemical industry in terms of its excellent catalytic activity and stability.
- 13 September 2021
- Published by Wiley in Applied Organometallic Chemistry
- Vol. 35 (12) , e6445
Palladium nanoparticles encapsulated in polyimide nanofibers: An efficient and recyclable catalyst for coupling reaction
In this study, palladium‐encapsulated poly(amic acid) (Pd@PAA) nanofibers were prepared by electrospinning, followed by thermal imidization to synthesize palladium‐encapsulated polyimide (Pd@PI) nanofibers. Scanning electron microscopy (SEM) images confirmed the preparation of uniform and smooth Pd@PAA and Pd@PI nanofibers. Thermogravimetric analysis (TGA) results reveal that the Pd@PI nanofibers possessed excellent thermal stability. The dispersion of palladium nanoparticles in the polyimide nanofibers was characterized by transmission electron microscopy (TEM) and X‐ray diffraction (XRD). The catalysis results show that this Pd@PI fibrous catalyst was very efficient to catalyze the cross‐coupling reactions of aromatic iodides with n‐butyl acrylate (Heck reaction) or phenylboronic acid derivatives (Suzuki reaction) to afford the desired products in good to excellent yields. Moreover, the Pd@PI catalyst could be easily separated and recovered from the reaction mixture by simple filtration due to the regular fibrous structure and reused for 10 times for both Heck and Suzuki reactions without obvious loss of its initial catalytic activity. Thus, the Pd@PI nanofiber catalyst holds great potential in chemical industry in terms of its excellent catalytic activity and stability.
- 24 August 2020
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 138 (2)
Palladium complex embedded crosslinked polystyrene nanofibers as a green and efficient heterogeneous catalyst for coupling reactions
A simple and green chemical modification coupled with electrospinning technique has been developed to incorporate tetrakis(triphenylphosphine)palladium [Pd(PPh3)4] inside crosslinked polystyrene nanofibers (Pd@CPS) as an efficient and stable heterogeneous palladium catalyst. The catalytic activities and recyclabilities of the prepared Pd@CPS catalyst have been evaluated by using Suzuki and Heck reactions of various aromatic halides separately with phenylboronic acid and alkenes. The Pd@CPS exhibited high‐catalytic activities for the Suzuki and Heck reactions of aromatic iodides to afford the products in excellent yields (coupling yields >88%). The catalytic activities and the nanofiber structure remained essentially unchanged even after recycling for five times. The high activities and stabilities of the prepared Pd@CPS catalyst can be attributed to the ultrafine fiber and embedment of palladium active species inside the nanofibers.
- 24 August 2020
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 138 (2)
Palladium complex embedded crosslinked polystyrene nanofibers as a green and efficient heterogeneous catalyst for coupling reactions
A simple and green chemical modification coupled with electrospinning technique has been developed to incorporate tetrakis(triphenylphosphine)palladium [Pd(PPh3)4] inside crosslinked polystyrene nanofibers (Pd@CPS) as an efficient and stable heterogeneous palladium catalyst. The catalytic activities and recyclabilities of the prepared Pd@CPS catalyst have been evaluated by using Suzuki and Heck reactions of various aromatic halides separately with phenylboronic acid and alkenes. The Pd@CPS exhibited high‐catalytic activities for the Suzuki and Heck reactions of aromatic iodides to afford the products in excellent yields (coupling yields >88%). The catalytic activities and the nanofiber structure remained essentially unchanged even after recycling for five times. The high activities and stabilities of the prepared Pd@CPS catalyst can be attributed to the ultrafine fiber and embedment of palladium active species inside the nanofibers.
- 30 August 2019
- Published by Springer Nature in Journal of Porous Materials
- Vol. 27 (1) , 179-187
Porous and efficient polymeric solid acid synthesized from sulfonation of nanoporous polymer
- 30 August 2019
- Published by Springer Nature in Journal of Porous Materials
- Vol. 27 (1) , 179-187
Porous and efficient polymeric solid acid synthesized from sulfonation of nanoporous polymer
- 2 September 2010
- Published by Wiley in ChemInform
- Vol. 41 (39)
ChemInform Abstract: Palladium-Catalyzed Reductive Homocoupling of Aromatic Halides and Oxidation of Alcohols.
Treatment of phenyl iodide and bromide as well as iodopyridine and bromopyridine with 3‐pentanol, CsF, and PdCl2(dppf) is found to result in the formation of biaryls.
- 2 September 2010
- Published by Wiley in ChemInform
- Vol. 41 (39)
ChemInform Abstract: Palladium-Catalyzed Reductive Homocoupling of Aromatic Halides and Oxidation of Alcohols.
Treatment of phenyl iodide and bromide as well as iodopyridine and bromopyridine with 3‐pentanol, CsF, and PdCl2(dppf) is found to result in the formation of biaryls.