JHJames Hendrie

James Hendrie

*This is an algorithmically generated author record based on publicly available information.

James Hendrie has a total of 42 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Miniaturizing Ultrastable Electromagnetic Oscillators: Sub- 10−14 Frequency Instability from a Centimeter-Scale Fabry-Perot Cavity

    by Charles A. McLemore, Naijun Jin, Megan L. Kelleher, James P. Hendrie, David Mason, Yizhi Luo, Dahyeon Lee, Peter Rakich, Scott A. Diddams, Franklyn Quinlan

    The best performance from compact, portable, and repeatably manufactured electromagnetic (EM) oscillators has for decades been built upon crystalline quartz resonators operating at radio frequencies. Such a source of frequency-stable EM waves has enabled a wide range of applications of significant technical and societal benefit, such as navigation and communication systems, distributed sensing, geodesy, and fundamental physics. However, meeting demands for increased measurement sensitivity requires pushing beyond a fractional frequency stability of 10−13, typical of the best ovenized quartz. To date, such performance has been available in the microwave domain only with the use of complex cryogenic systems, or in the optical domain at the expense of larger volume and weight. In either case, the size, weight, and power of state-of-the-art EM oscillators has relegated their use to laboratory experiments. Here we demonstrate the validity of a manufacturable, compact Fabry-Perot reference that improves upon all other centimeter-scale oscillators by more than a factor of 10, including those based on solid-state optical resonators as well as quartz. In a specific implementation, we show an 8 ml bonded assembly containing three vacuum-gap Fabry-Perot optical cavities with mirrors lithographically fabricated on a single substrate, each with quality factor exceeding 10 billion. A laser stabilized to one of the cavities exhibits thermal-noise-limited phase noise for offset frequencies ranging from 1 Hz to nearly 1 kHz, and fractional frequency stability of 7×10−15 at 1 s. Our advance with lithographically defined and microfabricated mirrors is validated by rigorous models, which highlight a path to oscillators with size comparable to ovenized quartz, but with significantly improved performance. For example, we predict sub-10−14 performance is readily attainable with a Fabry-Perot cavity volume less than 2 ml.


  • Top Cited Papers

    Micro-fabricated mirrors with finesse exceeding one million

    by Naijun Jin, Charles A. McLemore, David Mason, James P. Hendrie, Yizhi Luo, Megan L. Kelleher, Prashanta Kharel, Franklyn Quinlan, Scott A. Diddams, Peter T. Rakich

    The Fabry–Perot resonator is one of the most widely used optical devices, enabling scientific and technological breakthroughs in diverse fields including cavity quantum electrodynamics, optical clocks, precision length metrology, and spectroscopy. Though resonator designs vary widely, all high-end applications benefit from mirrors with the lowest loss and highest finesse possible. Fabrication of the highest-finesse mirrors relies on centuries-old mechanical polishing techniques, which offer losses at the parts-per-million (ppm) level. However, no existing fabrication techniques are able to produce high-finesse resonators with the large range of mirror geometries needed for scalable quantum devices and next-generation compact atomic clocks. In this paper, we introduce a scalable approach to fabricate mirrors with ultrahigh finesse ( ≥ 10 6 ) and user-defined radius of curvature spanning of four orders of magnitude ( 10 − 4 − 10 0 m ). We employ photoresist reflow and reactive ion etching to shape and transfer mirror templates onto a substrate while maintaining sub-Angstrom roughness. This substrate is coated with a dielectric stack and used to create arrays of compact Fabry–Perot resonators with finesse values as high as 1.3 million and measured excess loss < 1 p p m . Optical ringdown measurements of 43 devices across five substrates reveal that the fabricated cavity mirrors—with both small and large radii of curvature—produce an average coating-limited finesse of 1.05 million. This versatile approach opens the door to scalable fabrication of high-finesse miniaturized Fabry–Perot cavities needed for emerging quantum optics and frequency metrology technologies.


  • Exceptional points and the ring laser gyroscope

    by Luke Horstman, Ning Hsu, James Hendrie, David Smith, Jean-Claude Diels

    An equivalence is made between the exceptional points proposed by the field of non-Hermitian quantum mechanics and the dead band observed in laser gyroscopes. The sensitivity enhancement near this exceptional point is plagued by increased uncertainty due to broadening of the beat-note bandwidth. Also, near the dead band the gyroscope response is caused by Rabi intensity oscillations and not solely by a phase modulation. Finally, a distinction is made between conservative and non-conservative coupling.


  • Sensitivity enhancement of a mode-locked ring laser gyroscope by giant intracavity dispersion

    by M. Lenzner, J. Hendrie, H. Afkhamiardakani, L. Horstman, N. Hsu, J.-C. Diels, L. Arissian

    It has been theoretically predicted that giant intracavity dispersion can significantly alter the response of a ring laser gyroscope. We demonstrate this effect experimentally in a mode-locked ring laser. Group velocity dispersion of this magnitude can only be the resonant dispersion due to the Kramers-Kronig relation. Although the bandwidth of this large dispersion is rather small, inserting a Fabry-Perot interferometer into the cavity provides positive dispersion (resulting in ”slow light”) to all components of the frequency comb. We show that this is due to the the Fabry-Perot comb coupling to the laser resonator comb. Increasing the sensitivity of the gyroscope would require a large negative dispersion (resulting in ”fast light”) in the cavity. This can be achieved using a Gires-Tournois-interferometer.

  • Novel free space and fiber laser cavities demonstrating extreme sensitivities in Intracavity Phase Interferometry systems

    by James Hendrie, Hanieh Afkhamiardakani, Luke Horstman, Matthias Lenzner, Ladan Arissian, Jean-Claude Diels

    A method to enhance the sensitivity of sensors based on Intracavity Phase Interferometry by a factor of up to 10,000 is demonstrated in a free space laser. This technique is then implemented in fiber lasers.

  • Ultrasensitive Phase Sensing Inside a Mode-Locked Fiber Laser

    by H. Afkhamiardakani, James Hendrie, Luke Horstman, M. Tehrani, J.C. Diels, Ladan Arissian

    A bidirectional ring laser generates two frequency combs producing a beat frequency proportional to the relative phase shift between the intracavity pulses. Methods of optical comb stabilization and multiplexing with intracavity resonators are presented.


  • Exotic nonlinear effects by inserting a low finesse resonator in a mode-locked laser cavity

    by James Hendrie, Ning Hsu, Jean-Claude Diels, Matthias Lenzner, Ladan Arissian

    Intracavity comb multiplication is demonstrated by inserting a low finesse resonator in a mode-locked laser. Control of the comb in frequency and repetition rate is demonstrated.

  • Intracavity Phase Interferometry Enhanced with Resonant Linear Dispersion

    by James Hendrie, Matthias Lenzner, Ladan Arissian, Jean-Claude M. Diels

    Intracavity phase interferometry measures a beat frequency between two countercirculating pulses within a mode-locked cavity. A modification of sensitivity through insertionof resonant linear dispersion is experimentally demonstrated, while the pulse velocity remainsunchanged.

  • Open Access

    Impact of resonant dispersion on the sensitivity of intracavity phase interferometry and laser gyros

    by James Hendrie, Matthias Lenzner, Hanieh Afkhamiardakani, Jean Claude Diels, Ladan Arissian

    Intracavity phase interferometry is a phase sensing technique using mode-locked lasers in which two intracavity pulses circulate. The beat frequency between the two output frequency combs is proportional to a phase shift to be measured. A laser gyro is a particular implementation of this device. The demonstrated sensitivity of 10−8 of these devices could be manipulated by applying a giant dispersion to each tooth of the comb. It is shown that the resonant dispersion of a Fabry-Perot inserted in the cavity couples to the modes of the frequency comb, resulting in a large change in phase response.