Sakanann Vann
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Sakanann Vann has a total of 15 co-authors. Here are the top co-authors by number of shared publications:
- Avirut Puttiwongrak
Geotechnical and Earth Resources Engineering, Faculty of Civil and Environmental Engineering, Asian Institute of Technology, Pathumthani 12120, Thailand
5 shared publications - Thongchai Suteerasak
Faculty of Technology and Environment, Phuket Campus, Prince of Songkla University, Phuket 83120, Thailand
4 shared publications - Kiyota Hashimoto
Andaman Environment and Natural Disaster Research Center, Prince of Songkla University Phuket Campus , Phuket , Thailand
2 shared publications Chaiyaphruk Chaiyasart
Geotechnical and Earth Resources Engineering, Asian Institute of Technology , Pathumthani , Thailand
1 shared publication- Guoqing Jing
Beijing Jiaotong University
1 shared publication - Kornkanok Sangprasat
School of Engineering and Technology, Asian Institute of Technology, Khlong Nueng, Thailand
1 shared publication
Latest Publications
- 24 July 2024
- Published by Springer Nature in Transportation Infrastructure Geotechnology
- Vol. 11 (6) , 4220-4241
Soil Resistivity Assessment and Correlation on Geotechnical Properties of Backfill Soils for Substation Grounding System in Thailand
- 24 July 2024
- Published by Springer Nature in Transportation Infrastructure Geotechnology
- Vol. 11 (6) , 4220-4241
Soil Resistivity Assessment and Correlation on Geotechnical Properties of Backfill Soils for Substation Grounding System in Thailand
- Open Access
- 17 June 2023
- Published by MDPI AG in Geosciences
- Vol. 13 (6) , 185
Geological and Climatic Factors Affecting the Correlation between Electrical Resistivity and SPT N-Value in Sandy Soils of Phuket, Thailand
Understanding the technical properties of the subsurface soil is essential for carrying out any building project correctly. In sandy soils in Phuket, Thailand, a correlation between electrical resistivity and the SPT N-value should be established in design to cut down on the time and expense of engineering field work for site investigation operations. Using the least squares method, the data of electrical resistivity and SPT N-values were fitted for regression analysis, and the behavior of the fitting coefficients was examined under various soil conditions found in the field. The factors affecting the link between electrical resistivity and the SPT N-value were found using data classifications of geology and climate. Phuket is located in a humid tropical region with frequent heavy rainstorms and extended periods of high temperatures and is composed of two main distinct geological areas: (1) igneous rock and (2) sedimentary and metamorphic rocks. According to the geological classification, the regression parameter (R2) of the relationship between the electrical resistivity and SPT N-values somewhat increased from a straightforward plot (R2 = 0.0171) to 0.1721, and the geology and climate data categorization revealed the best fit which is an exponential model (R2 = 0.6175). By re-examining the two VES lines under the identical bedrock and climate characteristics as the original model, the relative R2 of 0.5519 validates the association between electrical resistivity and SPT N-values. It is important to emphasize that the geology and climate of the collected data have an impact on the correlation model. Furthermore, a geotechnical investigation should be used to confirm the findings of an electrical resistivity survey as a preliminary tool to assess any problematic subsurface zones. However, more field test data from diverse places must be acquired in order to establish the relationship between the SPT N-value and electrical resistivity of sandy soils.
- 17 June 2023
- Published by MDPI AG in Geosciences
- Vol. 13 (6) , 185
Open AccessGeological and Climatic Factors Affecting the Correlation between Electrical Resistivity and SPT N-Value in Sandy Soils of Phuket, Thailand
Understanding the technical properties of the subsurface soil is essential for carrying out any building project correctly. In sandy soils in Phuket, Thailand, a correlation between electrical resistivity and the SPT N-value should be established in design to cut down on the time and expense of engineering field work for site investigation operations. Using the least squares method, the data of electrical resistivity and SPT N-values were fitted for regression analysis, and the behavior of the fitting coefficients was examined under various soil conditions found in the field. The factors affecting the link between electrical resistivity and the SPT N-value were found using data classifications of geology and climate. Phuket is located in a humid tropical region with frequent heavy rainstorms and extended periods of high temperatures and is composed of two main distinct geological areas: (1) igneous rock and (2) sedimentary and metamorphic rocks. According to the geological classification, the regression parameter (R2) of the relationship between the electrical resistivity and SPT N-values somewhat increased from a straightforward plot (R2 = 0.0171) to 0.1721, and the geology and climate data categorization revealed the best fit which is an exponential model (R2 = 0.6175). By re-examining the two VES lines under the identical bedrock and climate characteristics as the original model, the relative R2 of 0.5519 validates the association between electrical resistivity and SPT N-values. It is important to emphasize that the geology and climate of the collected data have an impact on the correlation model. Furthermore, a geotechnical investigation should be used to confirm the findings of an electrical resistivity survey as a preliminary tool to assess any problematic subsurface zones. However, more field test data from diverse places must be acquired in order to establish the relationship between the SPT N-value and electrical resistivity of sandy soils.
- Open Access
- 1 January 2022
- Published by Walter de Gruyter GmbH in Open Geosciences
- Vol. 14 (1) , 607-614
A 3D empirical model of standard compaction curve for Thailand shales: Porosity in function of burial depth and geological time
Shale rock formed from small clay particles, and shale compaction is an essential factor to estimate shale reserves. The classical Athy’s model has been used to obtain the shale compaction curve to describe the relationship between porosity and depth, an essential input data for basin modelling. But recent studies revealed that burial time, among other factors, should be considered and that geological age is another important factor in some regions. This is because geological and lithological histories are crucially different among geological ages. This study employed the newest data of Thailand shales and confirmed that different geological ages (Cenozoic, Mesozoic, and Paleozoic ages) require different shale compaction curves by estimating numerical geological time with the relationship of velocity and depth in each geological age. We obtained empirical models of the shale compaction curve of each geological age by multi-linear regression. The standard curve of shale compaction with the relationship among porosity, depth, and time, proposed in a previous study, was also re-affirmed with the newly obtained models.
- 1 January 2022
- Published by Walter de Gruyter GmbH in Open Geosciences
- Vol. 14 (1) , 607-614
Open AccessA 3D empirical model of standard compaction curve for Thailand shales: Porosity in function of burial depth and geological time
Shale rock formed from small clay particles, and shale compaction is an essential factor to estimate shale reserves. The classical Athy’s model has been used to obtain the shale compaction curve to describe the relationship between porosity and depth, an essential input data for basin modelling. But recent studies revealed that burial time, among other factors, should be considered and that geological age is another important factor in some regions. This is because geological and lithological histories are crucially different among geological ages. This study employed the newest data of Thailand shales and confirmed that different geological ages (Cenozoic, Mesozoic, and Paleozoic ages) require different shale compaction curves by estimating numerical geological time with the relationship of velocity and depth in each geological age. We obtained empirical models of the shale compaction curve of each geological age by multi-linear regression. The standard curve of shale compaction with the relationship among porosity, depth, and time, proposed in a previous study, was also re-affirmed with the newly obtained models.
- Open Access
- 31 December 2021
- Published by MDPI AG in Sustainability
- Vol. 14 (1) , 397
Application of Geoelectrical Survey and Time-Lapse Resistivity with Groundwater Data in Delineating a Groundwater Potential Map: A Case Study from Phuket Island, Thailand
Phuket is well-known around the world as a popular tourist destination. Tourism-related population growth depends more on groundwater as the only available source of potable water in Phuket. The proper precautions must be taken to reduce the risk of spending large sums of money in sinking abortive boreholes, and a groundwater potential map would enhance the success rate of future groundwater exploration and exploitation in the study area. Geoelectrical surveys were carried out in this study to collect electrical properties of the subsurface, and the Dar-Zarrouk parameters (DZP) were calculated using the geoelectrical data. The first thematic groundwater potential map was constructed using the interpretation of DZP, while the second thematic groundwater potential map was created using the basis maps of the depth-of-basement and aquifer thickness parameters. Finally, two thematic maps based on geographic information system (GIS) environments were overlaid on a groundwater potential map of Phuket. However, in order to provide a reliable assessment of groundwater potential, time-lapse electrical resistivity imaging was used to confirm the area of the high-potential zone indicated on the map. The map created by this study is aimed to act as a reference for future groundwater exploration and exploitation, preventing water supplies from becoming unsustainable through botched borehole drilling for groundwater production.
- 31 December 2021
- Published by MDPI AG in Sustainability
- Vol. 14 (1) , 397
Open AccessApplication of Geoelectrical Survey and Time-Lapse Resistivity with Groundwater Data in Delineating a Groundwater Potential Map: A Case Study from Phuket Island, Thailand
Phuket is well-known around the world as a popular tourist destination. Tourism-related population growth depends more on groundwater as the only available source of potable water in Phuket. The proper precautions must be taken to reduce the risk of spending large sums of money in sinking abortive boreholes, and a groundwater potential map would enhance the success rate of future groundwater exploration and exploitation in the study area. Geoelectrical surveys were carried out in this study to collect electrical properties of the subsurface, and the Dar-Zarrouk parameters (DZP) were calculated using the geoelectrical data. The first thematic groundwater potential map was constructed using the interpretation of DZP, while the second thematic groundwater potential map was created using the basis maps of the depth-of-basement and aquifer thickness parameters. Finally, two thematic maps based on geographic information system (GIS) environments were overlaid on a groundwater potential map of Phuket. However, in order to provide a reliable assessment of groundwater potential, time-lapse electrical resistivity imaging was used to confirm the area of the high-potential zone indicated on the map. The map created by this study is aimed to act as a reference for future groundwater exploration and exploitation, preventing water supplies from becoming unsustainable through botched borehole drilling for groundwater production.
- Open Access
Delineation of Seawater Intrusion Using Geo-Electrical Survey in a Coastal Aquifer of Kamala Beach, Phuket, Thailand
The coastal areas of Phuket Island are facing the risk of seawater intrusion, because intense anthropic activity due to urbanization and the expansion of tourism influences coastal hydrologic systems. Indeed, the Kamala sub-district—on the western part of Phuket Island—is a well-known and attractive destination for tourists. Previous research indicates that there is likely to be a seawater intrusion in Kamala. The main purpose of this study was to delineate the seawater intrusion problem in a coastal aquifer in Kamala. Geo-electrical surveys of four lines were successfully conducted in the study area. Two-dimensional (2D) inversion models from the resistivity data show high-resolution subsurface resistivity anomalies of seawater intrusion. The concentration of the seawater intrusion decreases eastward toward the inland areas. Based on a sample measurement, the contaminated zone of seawater has a resistivity value smaller than 30 Ohm-m, and the empirical relationship between the formation conductivity and fluid conductivity of the study area was established. Finally, time-lapse Electrical Resistivity Imaging (time-lapse ERI) was conducted to prove that there was no presence of clay layers in study area; thus, the low resistivity plumes (smaller than 30 Ohm-m) were scientifically interpreted as being seawater intrusion.
Open AccessDelineation of Seawater Intrusion Using Geo-Electrical Survey in a Coastal Aquifer of Kamala Beach, Phuket, Thailand
The coastal areas of Phuket Island are facing the risk of seawater intrusion, because intense anthropic activity due to urbanization and the expansion of tourism influences coastal hydrologic systems. Indeed, the Kamala sub-district—on the western part of Phuket Island—is a well-known and attractive destination for tourists. Previous research indicates that there is likely to be a seawater intrusion in Kamala. The main purpose of this study was to delineate the seawater intrusion problem in a coastal aquifer in Kamala. Geo-electrical surveys of four lines were successfully conducted in the study area. Two-dimensional (2D) inversion models from the resistivity data show high-resolution subsurface resistivity anomalies of seawater intrusion. The concentration of the seawater intrusion decreases eastward toward the inland areas. Based on a sample measurement, the contaminated zone of seawater has a resistivity value smaller than 30 Ohm-m, and the empirical relationship between the formation conductivity and fluid conductivity of the study area was established. Finally, time-lapse Electrical Resistivity Imaging (time-lapse ERI) was conducted to prove that there was no presence of clay layers in study area; thus, the low resistivity plumes (smaller than 30 Ohm-m) were scientifically interpreted as being seawater intrusion.