Hiroaki Hashida
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Hiroaki Hashida has a total of 33 co-authors. Here are the top co-authors by number of shared publications:
- Nei Kato
Tohoku University
18 shared publications - Yuichi Kawamoto
Graduate School of Information Sciences (GSIS), Tohoku University, Sendai, Japan
18 shared publications - Masayuki Ariyoshi
Advanced Network Research Laboratories, NEC Corporation, Kawasaki, Japan
4 shared publications - Boya Di
Peking University
3 shared publications - Kazuma Mashiko
Graduate School of Information Sciences, Tohoku University, Sendai, Japan
2 shared publications - Kohei Yoshida
Advanced Network Research Laboratories, NEC Corporation, Kawasaki, Japan
2 shared publications
Latest Publications
- 22 May 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Wireless Communications Letters
- Vol. 15 (21622337) , 3269-3273
Snell-Guided Coverage Estimation Model for Optimal Static Metasurface Design
In 6G high-frequency bands, narrow coverage due to high propagation loss presents a significant challenge. Static metasurface technology has gained considerable attention for low-cost coverage expansion. However, the reflection direction of a static metasurface cannot be changed once determined. Therefore, the pre-installation design of the static metasurface is essential. Designing a static metasurface requires a model that accurately evaluates the coverage using the design parameters as input. However, conventional coverage evaluation models exhibit considerable computational complexity, thereby posing challenges for optimal design. This paper proposes the Snell-guided coverage estimation (SCE) model, which avoids conventional received power distribution calculations and rapidly estimates coverage boundaries based on the generalized Snell’s law. Furthermore, we demonstrate the reduction in the reflecting area through the optimization of static metasurface design.
- 22 May 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Wireless Communications Letters
- Vol. 15 (21622337) , 3269-3273
Snell-Guided Coverage Estimation Model for Optimal Static Metasurface Design
In 6G high-frequency bands, narrow coverage due to high propagation loss presents a significant challenge. Static metasurface technology has gained considerable attention for low-cost coverage expansion. However, the reflection direction of a static metasurface cannot be changed once determined. Therefore, the pre-installation design of the static metasurface is essential. Designing a static metasurface requires a model that accurately evaluates the coverage using the design parameters as input. However, conventional coverage evaluation models exhibit considerable computational complexity, thereby posing challenges for optimal design. This paper proposes the Snell-guided coverage estimation (SCE) model, which avoids conventional received power distribution calculations and rapidly estimates coverage boundaries based on the generalized Snell’s law. Furthermore, we demonstrate the reduction in the reflecting area through the optimization of static metasurface design.
- Open Access
- 5 May 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Wireless Communications
- Vol. PP (15361284) , 1-8
IRS Calibration for Geometric Errors in Real-World Beamforming: Conceptualization and Experimental Validation
Intelligent reflecting surfaces (IRSs) have emerged as a promising technology for enhancing wireless communications by dynamically shaping the propagation environment using controllable passive elements. However, installation angle and position errors must be addressed for real-world IRS implementation, as neglecting these physical misalignments significantly degrades beamforming accuracy and communication quality. This study addresses this challenge by introducing the concept of IRS calibration. Calibration is the process of estimating the incident and reflection angle offsets and correcting them via phase control on the IRS side to recover optimal beamforming. Key design issues are identified by performing calibration under real-world constraints. It is proposed that decoupled angular offsets can be uniquely identified using power measurements at two receiver points. The effectiveness of the proposed method is verified via experiments in the 28 GHz band using actual IRS hardware. The experimental results confirm that the impact of angular errors is successfully reduced across various error scales and reflection directions. The findings of this study highlight the importance and feasibility of calibration as a basis for real-world IRS deployment.
- 5 May 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Wireless Communications
- Vol. PP (15361284) , 1-8
Open AccessIRS Calibration for Geometric Errors in Real-World Beamforming: Conceptualization and Experimental Validation
Intelligent reflecting surfaces (IRSs) have emerged as a promising technology for enhancing wireless communications by dynamically shaping the propagation environment using controllable passive elements. However, installation angle and position errors must be addressed for real-world IRS implementation, as neglecting these physical misalignments significantly degrades beamforming accuracy and communication quality. This study addresses this challenge by introducing the concept of IRS calibration. Calibration is the process of estimating the incident and reflection angle offsets and correcting them via phase control on the IRS side to recover optimal beamforming. Key design issues are identified by performing calibration under real-world constraints. It is proposed that decoupled angular offsets can be uniquely identified using power measurements at two receiver points. The effectiveness of the proposed method is verified via experiments in the 28 GHz band using actual IRS hardware. The experimental results confirm that the impact of angular errors is successfully reduced across various error scales and reflection directions. The findings of this study highlight the importance and feasibility of calibration as a basis for real-world IRS deployment.
- 3 April 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Network Science and Engineering
- Vol. 13, 8397-8409
Joint Design of Intelligent Reflecting Surface Partitioning and Scheduling for Multiuser Communications
Intelligent reflecting surfaces (IRSs) have emerged as a promising solution to enhance wireless communication, particularly in high-frequency bands where signal attenuation and blockage are commonly encountered. However, owing to the passive and analog nature of IRS, generating beams that support multiple users (UEs) simultaneously is difficult, and conventional methods face limitations in scenarios requiring ultra-massive connectivity, such as 6G networks. To address this, we propose a multiaccess scheme based on IRS partitioning. The IRS is divided into multiple regions, each of which directs a beam to a specific UE. Our method jointly optimizes communication scheduling, partition positions, and phase offsets to improve performance. Numerical evaluations demonstrate that our approach significantly outperforms traditional time-division multiple access (TDMA)-based IRS in terms of transmission. Furthermore, we examined the impact of each control parameter on performance, confirming that our method mitigates destructive signal superposition at partition boundaries and enhances communication efficiency. These findings suggest that the proposed IRS partitioning scheme is a viable approach to achieving ultra-high-speed, high-capacity, and ultra-massive connectivity in next-generation wireless networks.
- 3 April 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Network Science and Engineering
- Vol. 13, 8397-8409
Joint Design of Intelligent Reflecting Surface Partitioning and Scheduling for Multiuser Communications
Intelligent reflecting surfaces (IRSs) have emerged as a promising solution to enhance wireless communication, particularly in high-frequency bands where signal attenuation and blockage are commonly encountered. However, owing to the passive and analog nature of IRS, generating beams that support multiple users (UEs) simultaneously is difficult, and conventional methods face limitations in scenarios requiring ultra-massive connectivity, such as 6G networks. To address this, we propose a multiaccess scheme based on IRS partitioning. The IRS is divided into multiple regions, each of which directs a beam to a specific UE. Our method jointly optimizes communication scheduling, partition positions, and phase offsets to improve performance. Numerical evaluations demonstrate that our approach significantly outperforms traditional time-division multiple access (TDMA)-based IRS in terms of transmission. Furthermore, we examined the impact of each control parameter on performance, confirming that our method mitigates destructive signal superposition at partition boundaries and enhances communication efficiency. These findings suggest that the proposed IRS partitioning scheme is a viable approach to achieving ultra-high-speed, high-capacity, and ultra-massive connectivity in next-generation wireless networks.
- 11 March 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Network Science and Engineering
- Vol. 13, 7565-7580
Joint Optimization of Data Placement and Task Scheduling for Distributed Green Data Centers With Optical Satellite Networks
Distributed green data centers powered by renewable energy have garnered considerable attention owing to their potential to enhance both sustainability and disaster resilience. To interconnect these geographically dispersed sites, low-Earth orbit satellite optical communications offer a promising solution, providing low-latency and high-bandwidth connectivity. However, the efficient operation of such a system hinges on a comprehensive task scheduling strategy that addresses two critical factors: task assignment—determining which data center should process each task—and processor performance control—regulating the operational speed of each processor. The effectiveness of this strategy is deeply intertwined with data placement decisions, as the location of stored data directly influences the set of data centers eligible to execute specific tasks. Optimizing this system is particularly challenging owing to the inherent variability in two primary factors: the availability of renewable energy and the quality of satellite communication links, both of which fluctuate with weather. To address these challenges, this study proposes a framework for the joint optimization of data placement and task scheduling. The proposed approach simultaneously considers fluctuating communication and power resources to maximize user task satisfaction. The problem is formulated as a mixed-integer nonlinear programming problem, and efficient solutions are obtained through computationally efficient alternating optimization algorithms. The proposed method significantly enhances task satisfaction rates compared with conventional approaches that optimize data placement and task scheduling in isolation, particularly under heterogeneous task distributions and adverse weather conditions, demonstrating its robustness and adaptability.
- 11 March 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Network Science and Engineering
- Vol. 13, 7565-7580
Joint Optimization of Data Placement and Task Scheduling for Distributed Green Data Centers With Optical Satellite Networks
Distributed green data centers powered by renewable energy have garnered considerable attention owing to their potential to enhance both sustainability and disaster resilience. To interconnect these geographically dispersed sites, low-Earth orbit satellite optical communications offer a promising solution, providing low-latency and high-bandwidth connectivity. However, the efficient operation of such a system hinges on a comprehensive task scheduling strategy that addresses two critical factors: task assignment—determining which data center should process each task—and processor performance control—regulating the operational speed of each processor. The effectiveness of this strategy is deeply intertwined with data placement decisions, as the location of stored data directly influences the set of data centers eligible to execute specific tasks. Optimizing this system is particularly challenging owing to the inherent variability in two primary factors: the availability of renewable energy and the quality of satellite communication links, both of which fluctuate with weather. To address these challenges, this study proposes a framework for the joint optimization of data placement and task scheduling. The proposed approach simultaneously considers fluctuating communication and power resources to maximize user task satisfaction. The problem is formulated as a mixed-integer nonlinear programming problem, and efficient solutions are obtained through computationally efficient alternating optimization algorithms. The proposed method significantly enhances task satisfaction rates compared with conventional approaches that optimize data placement and task scheduling in isolation, particularly under heterogeneous task distributions and adverse weather conditions, demonstrating its robustness and adaptability.
- Open Access
- 28 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Internet of Things Journal
- Vol. 13 (8) , 16201-16217
Precoding-Free Hierarchical Rate-Splitting Multiple Access via Stacked Intelligent Metasurface
Interference management is a central bottleneck in dense multiantenna wireless networks. In this study, we present a digital precoding-free hierarchical rate-splitting multiple access (HRSMA) architecture assisted by a stacked intelligent metasurface (SIM) to achieve high spectral efficiency and user fairness with reduced hardware complexity. In the proposed system, the base station (BS) performs only scalar power allocation, whereas a multilayer SIM acts as a wave-domain processor that spatially separates users and mitigates interference via nonlinear wavefront reconfiguration. This design eliminates the need for digital or hybrid precoding, drastically reducing the baseband computations. A joint optimization problem is formulated to maximize the minimum user rate by jointly optimizing SIM phase shifts, power allocation, and user grouping. To efficiently solve the resulting nonconvex problem, an alternating optimization (AO) algorithm is developed, combining simultaneous perturbation stochastic approximation (SPSA) for SIM configuration and power control with clustering-based grouping refinement. Simulation results demonstrate that the proposed SIM-aided HRSMA achieves substantial gains in both spectral efficiency and fairness compared to hybrid beamforming (HBF) and nonprecoding baselines. Specifically, SIM-aided HRSMA attains comparable or superior minimum rates with significantly fewer active antennas by exploiting the additional wave-domain degrees of freedom facilitated using multilayer SIMs. These findings highlight the potential of SIM-aided HRSMA as a low-cost, energy-efficient, and scalable solution for beyond-6G networks.
- 28 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Internet of Things Journal
- Vol. 13 (8) , 16201-16217
Open AccessPrecoding-Free Hierarchical Rate-Splitting Multiple Access via Stacked Intelligent Metasurface
Interference management is a central bottleneck in dense multiantenna wireless networks. In this study, we present a digital precoding-free hierarchical rate-splitting multiple access (HRSMA) architecture assisted by a stacked intelligent metasurface (SIM) to achieve high spectral efficiency and user fairness with reduced hardware complexity. In the proposed system, the base station (BS) performs only scalar power allocation, whereas a multilayer SIM acts as a wave-domain processor that spatially separates users and mitigates interference via nonlinear wavefront reconfiguration. This design eliminates the need for digital or hybrid precoding, drastically reducing the baseband computations. A joint optimization problem is formulated to maximize the minimum user rate by jointly optimizing SIM phase shifts, power allocation, and user grouping. To efficiently solve the resulting nonconvex problem, an alternating optimization (AO) algorithm is developed, combining simultaneous perturbation stochastic approximation (SPSA) for SIM configuration and power control with clustering-based grouping refinement. Simulation results demonstrate that the proposed SIM-aided HRSMA achieves substantial gains in both spectral efficiency and fairness compared to hybrid beamforming (HBF) and nonprecoding baselines. Specifically, SIM-aided HRSMA attains comparable or superior minimum rates with significantly fewer active antennas by exploiting the additional wave-domain degrees of freedom facilitated using multilayer SIMs. These findings highlight the potential of SIM-aided HRSMA as a low-cost, energy-efficient, and scalable solution for beyond-6G networks.
- 13 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Vehicular Technology
- Vol. PP (00189545) , 1-9
Efficient Cross-Orbital Link Construction for Low-Delay Communication in LEO Satellite Networks
The increasing demand for global wireless connectivity, driven by the expansion of IoT and AI applications, has led to growing interest in low earth orbit (LEO) satellite constellations. These systems offer low-delay and wide-coverage communication, addressing challenges faced by traditional geostationary orbit (GEO) satellites. However, conventional inter-satellite link structures impose limitations on communication efficiency, particularly in cross-orbital transmissions, leading to increased propagation delays. In this study, we explore a cross-orbital link construction method aimed at reducing communication delay in the LEO satellite constellations. The proposed method improves transmission efficiency by considering the spatial distribution of ground-based communication demand when selecting satellites that are to establish cross-orbital links. The simulation results show that the proposed approach reduces the average delay time compared to that experienced with the conventional random-selection-based method. In addition, we analyze the effect of topology update intervals on maintaining efficient link connections. The findings of this study provide insight into inter-satellite link construction strategies that can enhance communication performance in LEO satellite networks. By considering demand-driven link formation, this approach helps mitigate delay challenges in dynamic and heterogeneous communication environments.
- 13 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Vehicular Technology
- Vol. PP (00189545) , 1-9
Efficient Cross-Orbital Link Construction for Low-Delay Communication in LEO Satellite Networks
The increasing demand for global wireless connectivity, driven by the expansion of IoT and AI applications, has led to growing interest in low earth orbit (LEO) satellite constellations. These systems offer low-delay and wide-coverage communication, addressing challenges faced by traditional geostationary orbit (GEO) satellites. However, conventional inter-satellite link structures impose limitations on communication efficiency, particularly in cross-orbital transmissions, leading to increased propagation delays. In this study, we explore a cross-orbital link construction method aimed at reducing communication delay in the LEO satellite constellations. The proposed method improves transmission efficiency by considering the spatial distribution of ground-based communication demand when selecting satellites that are to establish cross-orbital links. The simulation results show that the proposed approach reduces the average delay time compared to that experienced with the conventional random-selection-based method. In addition, we analyze the effect of topology update intervals on maintaining efficient link connections. The findings of this study provide insight into inter-satellite link construction strategies that can enhance communication performance in LEO satellite networks. By considering demand-driven link formation, this approach helps mitigate delay challenges in dynamic and heterogeneous communication environments.
- 1 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Cognitive Communications and Networking
- Vol. 12, 11670-11681
Intelligent Traffic Steering for GEO–LEO Satellite Constellation: A Stable Matching Approach
- 1 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Cognitive Communications and Networking
- Vol. 12, 11670-11681
Intelligent Traffic Steering for GEO–LEO Satellite Constellation: A Stable Matching Approach
- 1 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Cognitive Communications and Networking
- Vol. 12, 10438-10449
Adaptive Coordination Scheme Selection in Multi-AP WLANs
- 1 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Cognitive Communications and Networking
- Vol. 12, 10438-10449
Adaptive Coordination Scheme Selection in Multi-AP WLANs