OMOlga A. Marina

Olga A. Marina

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Olga A. Marina has a total of 67 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Investigation of Secondary Phase Evolution in LSCF Electrodes during Long-Term SOEC Operation by X-ray Diffraction and Electron Microscopy Characterizations

    by Surendra B. Karki, Danny J. Edwards, Matthew J. Olszta, Christopher Coyle, Long Q. Le, Nathanael D. Royer, Lorraine M. Seymour, Kerry D. Meinhardt, Anthony D. Guzman, Olga A. Marina, et al.

    To clarify the origin of performance degradation in solid oxide electrolysis cells (SOECs), it is essential to distinguish between phases formed during fabrication and those that evolve under operation, and to quantify their impact on electrode functionality. (La0.6Sr0.4)0.95Co0.2Fe0.8O3-δ (LSCF) is a widely employed oxygen electrode material, yet its long-term stability in SOEC mode remains a critical challenge. In this work, we combined X-ray diffraction (XRD), scanning electron microscopy (SEM), and transmission electron microscopy (TEM) with energy-dispersive X-ray spectroscopy (EDS) to systematically compare as-received powders, untested electrodes, and electrodes operated for 2800 h. We identify that Fe–Co spinel and related secondary phases are already present after powder synthesis and cell fabrication but undergo significant compositional and morphological evolution during operation. Montage-based SEM/EDS analysis of the post-test electrode showed increases in both the area fractions of spinel and La or Sr-rich secondary phases after long-term operation. TEM analysis confirmed that the spinel phase in the untested electrode adopted an inverse cubic structure, while analysis of the tested electrode revealed compositional heterogeneity and cation redistribution among the evolved phases. These findings provide postmortem evidence of substantial secondary-phase evolution in the LSCF oxygen electrode and indicate its potential contribution to overall cell degradation.

  • Sputtered GDC Barrier Layers Enable High Performance and Durable 5 × 5 cm2 Solid Oxide Electrolysis Cells

    by Sangbong Ryu, Seraphim V. Belko, Tian Liu, Olga A. Marina

    Thin-film gadolinia-doped ceria (GDC) barriers deposited by magnetron sputtering offer a dense, interdiffusion-free alternative to conventional screen-printed layers, but their performance and durability in large-area, metallic testing environments remain largely undemonstrated. In this study, 5 × 5 cm2 SOECs incorporating either a sputtered or a screen-printed GDC barrier were fabricated and evaluated under stack-relevant electrolysis conditions. The sputtered GDC cell delivered a 27% higher current density at the thermoneutral voltage, attributed to a nearly 50% reduction in Ohmic resistance relative to the screen-printed counterpart. The long-term durability of the sputtered GDC cell was then assessed under galvanostatic electrolysis at 1.2 A/cm2, and post-test analysis confirmed that the GDC layer remained fully dense, well bonded to YSZ, and completely effective in blocking Sr migration across the entire active area after approximately 600 h of operation. Despite measurable performance degradation, losses originated from electrode-driven mechanismsNi restructuring and detachment at the hydrogen electrode, chromium poisoning within the oxygen electrode, and thermochemical decomposition of the oxygen electrode contact layerwhile the GDC barrier exhibited no structural or chemical failure. These results demonstrate that sputtered GDC not only lowers initial Ohmic resistance but also provides durable chemical protection in large-area SOECs, highlighting its suitability for future stack-scale systems.

  • Open Access

    Atomic Scale Insight Into High Voltage Degradation Mechanism in YSZ Electrolyte for Solid Oxide Electrolyzer Applications

    by Tian Liu, Renaldo Springer, Seraphim V. Belko, Danny J. Edwards, Kayla H. Yano, Tiffany C. Kaspar, Libor Kovarik, Daniel K. Schreiber, Matthew J. Olszta, Olga A. Marina

    With the rapid development of affordable energy, hydrogen can serve as an ideal long‐term energy storage medium and a commodity chemical/fuel precursor for energy conversion. Solid oxide electrolysis cells produce hydrogen from water with a high electrical efficiency in an environmentally friendly manner. However, the long‐term durability of solid oxide electrolysis cells is yet to be fully understood, especially in terms of decoding the fundamentals behind the degradation mechanisms. In this work, testing of solid oxide electrolysis cells was conducted at voltages well above the thermoneutral voltage of ~1.3 V to expose potential degradation mechanisms that could occur when solid oxide electrolysis cell is tested in a galvanostatic mode with voltage increasing over time. While standard electrochemical techniques did not reveal obvious degradation beyond the initial break‐in period, high‐resolution analyses uncovered intergranular and transgranular voids and cracks in the yttria‐stabilized zirconia electrolyte that were not observed during normal operation at 1.3 V. A comprehensive study of representative state‐of‐the‐art and thin‐film electrolyte and barrier layers was performed to establish a correlation between high voltages and structural changes in yttria‐stabilized zirconia. Void formation in yttria‐stabilized zirconia was attributed to strain‐vacancy interactions at high voltages, whereas the barrier/electrolyte interdiffusion layer and Ni precipitation in yttria‐stabilized zirconia were ruled out as triggers of void formation. This study provides insight into the operational boundaries of real‐time solid oxide electrolysis cells service, indicating that operating at voltages well above the thermoneutral voltage should be avoided.

  • Open Access

    Standard operating procedure for starting and disassembling single solid oxide cells for testing in electrolysis mode

    by Seraphim Belko, Renaldo Springer, Long Le, Christopher A. Coyle, Olga A. Marina

    Presented is a simple, step-by-step methodology describing how to start, precondition, terminate testing, and disassemble single, small-sized planar electrode-supported solid oxide electrolysis cells (SOECs). Careful control of the gas environment in the initial and final stages of solid oxide cell testing is essential for establishing baseline performance, ensuring controlled, reproducible electrochemical performance, and preserving cell chemical and structural integrity for post-mortem analyses.


  • Stable Cu-Doped La 2 NiO 4+δ Oxygen Electrodes for Solid Oxide Electrolysis Cells

    by Surendra B. Karki, Long Le, Lorraine Seymour, Renaldo Springer, Tian Liu, Olga A. Marina

    A high-temperature solid oxide electrolysis cell (SOEC) technology is making significant progress toward commercialization, aiming to offer an efficient and cost-competitive path to hydrogen production from water. Improvements in the performance and durability of SOECs are still needed to extend the device's life. Strontium surface segregation in state-of-the-art Sr-containing oxides, lanthanum strontium cobalt iron oxide (LSCF) and lanthanum strontium cobalt oxide (LSC), and Sr reactivity with air gas impurities, such as chromium (Cr) and sulfur (S), leading to secondary phase formation suppresses the electrode activity. Developing Sr-free oxygen electrodes would alleviate these issues and improve the long-term device operation. In this work, we investigated the performance and stability of copper-doped La2NiO4+δ compositions with the Ruddlesden-Popper structure for oxygen evolution reaction (OER) using small- and large-area planar electrode-supported SOECs. Cells with the La2Ni0.8Cu0.2O4+δ (LNCuO-20) demonstrated a current density of up to 1.2 A/cm2 at 750 °C at 1.3 V when operated in 90% steam in hydrogen versus air for over 1000 h. The materials' scalability and applicability for practical devices were validated by using 13 cm2 active area cells.


  • Open Access

    State of the art in low-temperature and high-temperature electrolysis

    by Katherine E. Ayers, Olga A. Marina

    Water electrolysis is gaining traction in large-scale applications, with production of multiple technologies scaling to hundreds and thousands of megawatts of new electrolyzer capacity annually. Low-temperature electrolysis has dominated the electrolyzer market for decades, but still only represents a small amount of the overall hydrogen market, due to the higher production costs versus hydrogen derived from fossil fuels. Advances are needed in capital cost and efficiency to close the cost gap, especially for energy applications. Similarly, while high-temperature electrolyzers can operate more efficiently, reducing the operating cost, they still need further scale-up and cost reduction to compete in these markets. Understanding the recent advances in each and the priority research directions is important to focus and accelerate innovation, and will be discussed in this article. The different advantages and disadvantages of each of these technologies will also be reviewed; there will likely be applications for each in the overall deployment of renewable hydrogen. Graphical abstract


  • Open Access

    Finite element modeling of the glass sealing process for solid oxide cell stacks

    by James Fitzpatrick, Kerry Meinhardt, Naveen Karri, Brian Koeppel, Jie Bao, Tongan Jin, Lorraine Seymour, Nathan Royer, Olga A. Marina


  • Understanding Temperature Stability of Surface Cation Dopants on LSCF Electrodes

    by Sophie Coppieters 'T Wallant, Filip Grajkowski, Bill Liu, Olga A Marina, Lorraine Seymour, Bilge Yildiz

    The widespread application of solid oxide fuel cells (SOFCs) is primarily inhibited by degradation issues impacting the stability and oxygen exchange kinetics of the oxygen electrode. State-of-the-art SOFC materials such as La0.6Sr0.4Co0.2Fe0.8O3-δ (LSCF) boast fast oxygen ion and electron conduction as well as high oxygen reduction activity. Furthermore, materials such as LSCF provide a potential pathway to reduce the operating temperature of SOFCs from 800-100 ° C to 400-800 ° C. But degradation issues continue to impede LSCF, primarily through strontium segregation to the electrode surface and subsequent passivating poisoning reactions due to chromium- and sulfur-containing species. In this work, we investigate a solution infiltration technique to introduce cation dopants to the surface of LSCF porous electrodes on symmetrical cells to improve the stability and performance through suppression of Sr segregation. We have previously demonstrated that introducing more oxidizable transition metal cations on the LSC electrode surface improves both the stability and oxygen exchange kinetics. Others have demonstrated that lanthanides can electrochemically stabilize the LSCF surface as well (Yu Chen, et al. Energy Environ. Sci., 2017, 10, 964-971). However, the temperature dependence of these cation dopants on electrode surface composition and electrochemical stability is not well understood. Thus, we are interested in exploring more oxidizable transition metal and lanthanide cations as infiltrated dopants on the porous LSCF electrode as a function of temperature. Preliminary experiments demonstrate that both transition metal and lanthanide cation dopants diffuse into the LSCF lattice at SOFC operating temperatures (above 700 ° C) and Sr segregates to the surface with increasing temperature. We do also observe some fundamental differences between the transition metal and lanthanide cations, such as the temperature dependence of A:B site ratio. Our initial electrochemical measurements indicate that these cation dopants are found to improve the stability of LSCF electrodes when tested at SOFC operating temperatures (800 ° C in ambient air) despite having largely diffused into the lattice at these temperatures. These preliminary results indicate a potential electrode surface reconstruction as a function of cation type and temperature. We aim to elucidate 1) the temperature stability of these cations at the surface, 2) the impact of these cations on the electrode surface composition and cell electrochemical stability as a function of temperature, and 3) the mechanism for electrochemical influence of these sub-surface cations. We utilize electrochemical impedance spectroscopy and chronoamperometric stability studies to characterize the impact of infiltrated cations on electrode activity and stability. We investigate the stability of cation dopants and reasons for observed electrochemical changes through x-ray photoelectron spectroscopy and x-ray diffraction studies. This work aims to elucidate the impact of transition metal and lanthanide cation dopants on electrode stability and performance as well as the stability of the dopants at the surface at different operating conditions, with a focus on developing a mechanistic understanding of sub-surface dopant influence on electrochemical performance.