HHHe Huang

He Huang

*This is an algorithmically generated author record based on publicly available information.

He Huang has a total of 5 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    A Method of Vibration Measurement with the Triboelectric Sensor during Geo-Energy Drilling

    by Rui Li, He Huang, Chuan Wu

    In the process of geo-energy drilling, the real-time vibration measurement of drill pipes is of significance for an understanding of the downhole conditions and the properties of rock. However, the vibration sensors used in downhole areas at present require additional power sources, such as batteries, and replacing the batteries would significantly reduce production efficiency and increase costs. In our work, a new vibration measurement method using a triboelectric nanogenerator is proposed which will synchronously achieve axial and lateral vibration, and also simultaneously be self-powered. The triboelectric nanogenerator is mainly made of nanomaterials, such as polyimide film and polytetrafluoroethylene (PTFE), and depends on the pulse signal generated by the contact of the two friction layers to measure the vibration frequency. Axial vibration tests show that the output voltage signal amplitude is approximately 3 V, the measurement range is from 0 to 9 Hz, the measurement error is less than 4%, and the maximum output power is 5.63 uW. Additionally, the lateral vibration tests show that the output voltage signal amplitude is approximately 2.5 V, the measurement range is from 0 to 6.8 Hz, the measurement error is less than 6%, and the maximum output power is 4.01 uW. The nanogenerator can typically work in an environment where the temperature is less than 145 °C and the relative humidity is less than 90%.


  • Open Access

    A Ring-Shaped Curved Deformable Self-Powered Vibration Sensor Applied in Drilling Conditions

    by Hu Wang, He Huang, Chuan Wu, Jinrun Liu

    Because of their low flexibility, traditional vibration sensors cannot perform arbitrary bending adjustments when facing curved surfaces and other complex working conditions during the drilling process; therefore, this research proposes a ring-shaped vibration sensor (RSV−TENG) that can deform freely in the bending direction, and which can be used in working conditions where the inner bending angle of the drill pipe changes greatly. Test results show that the vibration frequency measurement range is from 4 Hz to 16 Hz, with a measurement error less than 4%, the vibration amplitude measurement range is less than 20 mm, with a measurement error less than 5%, the output voltage and current signal are 120 V and 60 nA, respectively, when three RSV−TENGs are connected in parallel, and the maximum output power is 6 × 10−7 W when the external resistance is 106 Ω. Compared with traditional downhole sensors, this sensor has self-powered and self-sensing functions, eliminating the shortcomings of battery and cable power supply; in addition, this sensor can be installed in the drill pipe space with different curvature radii, so it is more suited to complex and changeable downhole working conditions.


  • Open Access

    Research on the Potential of Spherical Triboelectric Nanogenerator for Collecting Vibration Energy and Measuring Vibration

    by Chuan Wu, He Huang, Rui Li, Chenxing Fan

    The traditional downhole drilling vibration measurement methods which use cable or battery as power supplies increase the drilling costs and reduce the drilling efficiency. This paper proposes a spherical triboelectric nanogenerator, which shows the potential to collect the downhole vibration energy and measure the vibration frequency in a self-powered model. The power generation tests show that the output signal amplitude of the spherical triboelectric nanogenerator increases as the vibration frequency increases, and it can reach a maximum output voltage of 70 V, a maximum current of 3.3 × 10−5 A, and a maximum power of 10.9 × 10−9 W at 8 Hz when a 10-ohm resistor is connected. Therefore, if the power generation is stored for a certain period of time when numbers of the spherical triboelectric nanogenerators are connected in parallel, it may provide intermittent power for the low-power downhole measurement instruments. In addition, the sensing tests show that the measurement range is 0 to 8 Hz, the test error is less than 2%, the applicable working environment temperature is below 100 degrees Celsius, and the installation distance between the spherical triboelectric nanogenerator and the vibration source should be less than the critical value of 150 cm because the output signal amplitude is inversely proportional to the distance.