Ming Ma
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Ming Ma has a total of 32 co-authors. Here are the top co-authors by number of shared publications:
- Zhenrong Li
Key Laboratory of Multifunctional Materials and Structures Electronic Materials Research Laboratory Key Laboratory of the Ministry of Education & International Center for Dielectric Research School of Electronic Science and Engineering Faculty of Electronic and Information Engineering Xi'an Jiaotong University Xi'an China
6 shared publications Haisheng Guo
Electronic Materials Research Laboratory, Key Laboratory of the Ministry of Education & International Center for Dielectric Research, School of Electronic Science and Engineering, Faculty of Electronic and Information Engineering, Xi'an Jiaotong University , Xi'an 710049, China
5 shared publications- Kexin Song
Electronic Materials Research Lab, State Key Laboratory for Mechanical Behavior of Materials and Key Lab of Education Ministry, School of Electronic and Information Engineering, Xi’an Jiaotong University, Xi’an, China
5 shared publications - Song Xia
Key Laboratory of Multifunctional Materials and Structures, Ministry of Education, School of Electronic Science and Engineering, Xi’an Jiaotong University, Xi’an 710049, Shaanxi, China
5 shared publications Zhuo Xu
Electronic Materials Research Laboratory, Key Laboratory of the Ministry of Education & International Center for Dielectric Research, School of Electronic Science and Engineering, Faculty of Electronic and Information Engineering, Xi'an Jiaotong University , Xi'an 710049, China
4 shared publicationsRonglin Pan
Electronic Materials Research Laboratory, Key Laboratory of the Ministry of Education & International Center for Dielectric Research, School of Electronic and Information Engineering, Xi’an Jiao Tong University, Xi’an 710049, People's Republic of China
3 shared publications
Latest Publications
- 1 January 2026
- Published by Royal Society of Chemistry (RSC) in CrystEngComm
Lithium-modulated multi-wafer homoepitaxial growth of bulk GaN on MOCVD templates via the Na-flux method
Using MOCVD-GaN templates and precisely tuning Li additive concentration (0.20 mol%) in Na-flux growth, this study accelerates lateral coalescence and yields high-quality GaN crystals with moderate transparency.
- 1 January 2026
- Published by Royal Society of Chemistry (RSC) in CrystEngComm
Lithium-modulated multi-wafer homoepitaxial growth of bulk GaN on MOCVD templates via the Na-flux method
Using MOCVD-GaN templates and precisely tuning Li additive concentration (0.20 mol%) in Na-flux growth, this study accelerates lateral coalescence and yields high-quality GaN crystals with moderate transparency.
- 1 January 2026
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry C
Etching-assisted self-separation in GaN crystal growth: substrate pretreatment, interface engineering, and integrated manufacturing
This review systematically explores etching-assisted self-separation in GaN crystal growth. By synergizing interface engineering, epitaxial kinetics, and stress control, it provides a roadmap for scalable, damage-free GaN manufacturing.
- 1 January 2026
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry C
Etching-assisted self-separation in GaN crystal growth: substrate pretreatment, interface engineering, and integrated manufacturing
This review systematically explores etching-assisted self-separation in GaN crystal growth. By synergizing interface engineering, epitaxial kinetics, and stress control, it provides a roadmap for scalable, damage-free GaN manufacturing.
- 4 December 2024
- Published by Royal Society of Chemistry (RSC) in CrystEngComm
- Vol. 27 (3) , 400-406
Influence of Na : Ga ratios under the flux-excess aid on GaN crystal growth using the Na-flux LPE method
In the flux-excess assisted growth of GaN crystals, the effect of different Na : Ga molar ratios on crystal growth was investigated. A Na : Ga molar ratio of 70 : 30 is more conducive to the growth of high-quality GaN crystals.
- 4 December 2024
- Published by Royal Society of Chemistry (RSC) in CrystEngComm
- Vol. 27 (3) , 400-406
Influence of Na : Ga ratios under the flux-excess aid on GaN crystal growth using the Na-flux LPE method
In the flux-excess assisted growth of GaN crystals, the effect of different Na : Ga molar ratios on crystal growth was investigated. A Na : Ga molar ratio of 70 : 30 is more conducive to the growth of high-quality GaN crystals.
- 1 February 2023
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry C
- Vol. 11 (7) , 2664-2671
Giant piezoelectric properties of the [110]-oriented PZT-5H single crystals grown by solid state crystal growth
An ultrahigh piezoelectric performance (d33 ∼ 1800 pC N−1 and ∼ 2400 pm V−1 at 3 kV cm−1, k33 ∼ 87%) is achieved in the [110]-oriented PZT-5H single crystals grown using the solid state crystal growth method with excess PbO addition.
- 1 February 2023
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry C
- Vol. 11 (7) , 2664-2671
Giant piezoelectric properties of the [110]-oriented PZT-5H single crystals grown by solid state crystal growth
An ultrahigh piezoelectric performance (d33 ∼ 1800 pC N−1 and ∼ 2400 pm V−1 at 3 kV cm−1, k33 ∼ 87%) is achieved in the [110]-oriented PZT-5H single crystals grown using the solid state crystal growth method with excess PbO addition.
- 24 January 2022
- Published by AIP Publishing in Applied Physics Letters
- Vol. 120 (4) , 042902
Enhanced energy harvesting performance of PIN-PMN-PT single crystal unimorph using alternating current poling
In this work, the piezoelectric unimorph of a Pb(In1/2Nb1/2)O3 -Pb(Mg1/3Nb2/3)O3-PbTiO3 (PIN-PMN-PT) single crystal by alternating current poling (ACP) was studied for vibration energy harvesting. The figure of merit of of the 0.25PIN-0.43PMN-0.32PT single crystal was enhanced to be 29.3 × 10−12 m2/N by ACP, which is 1.9 times and 8.9 times as much as that of the 0.25PIN-0.43PMN-0.32PT single crystal and the commercial PZT5H ceramic by direct current poling (DCP), respectively. The piezoelectric unimorph of the 0.25PIN-0.43PMN-0.32PT single crystal by ACP produced the open circuit voltage of 67 Vp and the maximum power of 0.74 mW under on-resonance condition, which were 1.5 times and 1.8 times as much as the 0.25PIN-0.43PMN-0.32PT single crystal unimorph by DCP. Moreover, these were almost 2.4 times more voltage and 5.7 times more power than the PZT5H ceramic unimorph. Even under the off resonance condition, the piezoelectric unimorph of the 0.25PIN-0.43PMN-0.32PT single crystal by DCP and ACP produced 4.4 times and 8.0 times maximum output power as much as the PZT5H ceramic unimorph. ACP is a potential way to further enhance the output voltage and power of the 0.25PIN-0.43PMN-0.32PT single crystal unimorph for energy harvesting.- 24 January 2022
- Published by AIP Publishing in Applied Physics Letters
- Vol. 120 (4) , 042902
Enhanced energy harvesting performance of PIN-PMN-PT single crystal unimorph using alternating current poling
In this work, the piezoelectric unimorph of a Pb(In1/2Nb1/2)O3 -Pb(Mg1/3Nb2/3)O3-PbTiO3 (PIN-PMN-PT) single crystal by alternating current poling (ACP) was studied for vibration energy harvesting. The figure of merit of of the 0.25PIN-0.43PMN-0.32PT single crystal was enhanced to be 29.3 × 10−12 m2/N by ACP, which is 1.9 times and 8.9 times as much as that of the 0.25PIN-0.43PMN-0.32PT single crystal and the commercial PZT5H ceramic by direct current poling (DCP), respectively. The piezoelectric unimorph of the 0.25PIN-0.43PMN-0.32PT single crystal by ACP produced the open circuit voltage of 67 Vp and the maximum power of 0.74 mW under on-resonance condition, which were 1.5 times and 1.8 times as much as the 0.25PIN-0.43PMN-0.32PT single crystal unimorph by DCP. Moreover, these were almost 2.4 times more voltage and 5.7 times more power than the PZT5H ceramic unimorph. Even under the off resonance condition, the piezoelectric unimorph of the 0.25PIN-0.43PMN-0.32PT single crystal by DCP and ACP produced 4.4 times and 8.0 times maximum output power as much as the PZT5H ceramic unimorph. ACP is a potential way to further enhance the output voltage and power of the 0.25PIN-0.43PMN-0.32PT single crystal unimorph for energy harvesting.- 17 January 2022
- Published by Elsevier in Ceramics International
- Vol. 48 (9) , 13041-13046
High-temperature dielectric properties of Bi0.5Na0.5TiO3–NaNbO3–Sr0.8Na0.4Nb2O6 ceramics
- 17 January 2022
- Published by Elsevier in Ceramics International
- Vol. 48 (9) , 13041-13046
High-temperature dielectric properties of Bi0.5Na0.5TiO3–NaNbO3–Sr0.8Na0.4Nb2O6 ceramics
- 10 August 2021
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 130 (6) , 064101
Enhanced transverse piezoelectric properties by composition and poling electric field induced phase transition in PIN–PMN–PT single crystal near morphotropic phase boundary
A monoclinic phase is the bridge between the rhombohedral and tetragonal phases in the Pb(In1/2Nb1/2)O3–Pb(Mg1/3Nb2/3)O3–PbTiO3 (PIN–PMN–PT) single crystal near the morphotropic phase boundary (MPB), which is related to the superior piezoelectric performance. In this paper, the different phase transition process in the unpoled PIN–PMN–PT single crystals near MPB induced by composition variation was presented first. Based on this, direct current poling (DCP) and alternating current treatment (ACT) were applied on these samples. Also, the crystals by DCP–ACT have shown a more complex ferroelectric phase transition process than that by DCP, which is related to the induced monoclinic phase by applying an AC electric field. The transverse piezoelectric properties of the PIN–PMN–PT single crystal with various compositions by DCP and DCP–ACT were compared. ACT enhanced the electromechanical coupling coefficient , elastic compliance constant , and dielectric permittivity of the pre-DCP PIN–PMN–PT single crystals in the macrorhombohedral phase. As a result, the transverse piezoelectric constant of the crystals with various compositions was enhanced to be −1240, −1663, and −1252 pC/N by DCP–ACT, which were 61.7%, 73.0%, and 60.8% higher than that by DCP. However, ACT has little effect on the pre-DCP PIN–PMN–PT crystal with macrocoexistence of rhombohedral and monoclinic phases. The AC electric field could be a useful way for tuning the coexistence of rhombohedral and monoclinic phases in the PIN–PMN–PT crystal near MPB to achieve high transverse piezoelectric performance.- 10 August 2021
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 130 (6) , 064101
Enhanced transverse piezoelectric properties by composition and poling electric field induced phase transition in PIN–PMN–PT single crystal near morphotropic phase boundary
A monoclinic phase is the bridge between the rhombohedral and tetragonal phases in the Pb(In1/2Nb1/2)O3–Pb(Mg1/3Nb2/3)O3–PbTiO3 (PIN–PMN–PT) single crystal near the morphotropic phase boundary (MPB), which is related to the superior piezoelectric performance. In this paper, the different phase transition process in the unpoled PIN–PMN–PT single crystals near MPB induced by composition variation was presented first. Based on this, direct current poling (DCP) and alternating current treatment (ACT) were applied on these samples. Also, the crystals by DCP–ACT have shown a more complex ferroelectric phase transition process than that by DCP, which is related to the induced monoclinic phase by applying an AC electric field. The transverse piezoelectric properties of the PIN–PMN–PT single crystal with various compositions by DCP and DCP–ACT were compared. ACT enhanced the electromechanical coupling coefficient , elastic compliance constant , and dielectric permittivity of the pre-DCP PIN–PMN–PT single crystals in the macrorhombohedral phase. As a result, the transverse piezoelectric constant of the crystals with various compositions was enhanced to be −1240, −1663, and −1252 pC/N by DCP–ACT, which were 61.7%, 73.0%, and 60.8% higher than that by DCP. However, ACT has little effect on the pre-DCP PIN–PMN–PT crystal with macrocoexistence of rhombohedral and monoclinic phases. The AC electric field could be a useful way for tuning the coexistence of rhombohedral and monoclinic phases in the PIN–PMN–PT crystal near MPB to achieve high transverse piezoelectric performance.- 17 March 2021
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 129 (11) , 114102
Temperature dependence of the transverse piezoelectric properties in the [001]-poled 0.25Pb(In1/2Nb1/2)O3-0.42Pb(Mg1/3Nb2/3)O3-0.33PbTiO3 single crystal with alternating current treatment
In this work, the transverse piezoelectric properties of the pre-direct current poled (DCP) 0.25Pb(In1/2Nb1/2)O3-0.42Pb(Mg1/3Nb2/3)O3-0.33PbTiO3 (0.25PIN-0.42PMN-0.33PT) single crystals were enhanced by the alternating current treatment (ACT) of 10 kVp/cm (5.8 kVrms/cm), 50 Hz, and 20 cycles. The transverse piezoelectric constant of −1560 pC/N and electromechanical coupling coefficient of 0.92 at room temperature were achieved in the DCP-ACT crystal, which were, respectively, 80% and 11% higher than those of the DCP crystal . Meanwhile, the elastic compliance constant and dielectric permittivity of the DCP-ACT crystal were, respectively, 78% and 46% higher than those of the DCP crystal. Based on the temperature dependence of dielectric properties and resonance curves, the , , and of the DCP-ACT crystal were higher than those of the DCP crystal in the R phase region. The DCP-ACT crystal also showed a higher TFerro (110 °C) than the DCP crystal (96 °C), which was related to the intermediate phase induced by ACT. The at Tferro of the DCP-ACT crystal can be −3810 pC/N, which was 2.3 times that of the DCP crystal (−1680 pC/N). In the T phase region, the DCP-ACT crystal presented a high and attenuated impedance resonance. Moreover, ACT also affected the ferroelectric to paraelectric phase transition. This could be related to the nanoscale heterogeneous polar region induced by ACT, which enhanced the inhomogeneous state in the relaxor-based ferroelectric single crystal. ACT is a potential way for improving the transverse piezoelectric properties of the PIN-PMN-PT single crystal.- 17 March 2021
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 129 (11) , 114102
Temperature dependence of the transverse piezoelectric properties in the [001]-poled 0.25Pb(In1/2Nb1/2)O3-0.42Pb(Mg1/3Nb2/3)O3-0.33PbTiO3 single crystal with alternating current treatment
In this work, the transverse piezoelectric properties of the pre-direct current poled (DCP) 0.25Pb(In1/2Nb1/2)O3-0.42Pb(Mg1/3Nb2/3)O3-0.33PbTiO3 (0.25PIN-0.42PMN-0.33PT) single crystals were enhanced by the alternating current treatment (ACT) of 10 kVp/cm (5.8 kVrms/cm), 50 Hz, and 20 cycles. The transverse piezoelectric constant of −1560 pC/N and electromechanical coupling coefficient of 0.92 at room temperature were achieved in the DCP-ACT crystal, which were, respectively, 80% and 11% higher than those of the DCP crystal . Meanwhile, the elastic compliance constant and dielectric permittivity of the DCP-ACT crystal were, respectively, 78% and 46% higher than those of the DCP crystal. Based on the temperature dependence of dielectric properties and resonance curves, the , , and of the DCP-ACT crystal were higher than those of the DCP crystal in the R phase region. The DCP-ACT crystal also showed a higher TFerro (110 °C) than the DCP crystal (96 °C), which was related to the intermediate phase induced by ACT. The at Tferro of the DCP-ACT crystal can be −3810 pC/N, which was 2.3 times that of the DCP crystal (−1680 pC/N). In the T phase region, the DCP-ACT crystal presented a high and attenuated impedance resonance. Moreover, ACT also affected the ferroelectric to paraelectric phase transition. This could be related to the nanoscale heterogeneous polar region induced by ACT, which enhanced the inhomogeneous state in the relaxor-based ferroelectric single crystal. ACT is a potential way for improving the transverse piezoelectric properties of the PIN-PMN-PT single crystal.- Open Access
- 1 January 2021
- Published by AIP Publishing in APL Materials
- Vol. 9 (1) , 010703
High output power density and strong vibration durability in a modified barbell-shaped energy harvester based on multilayer Pb(In1/2Nb1/2)O3–Pb(Mg1/3Nb2/3)O3–PbTiO3 single crystals
Traditional piezoelectric energy harvesters are made of piezoelectric ceramics with a cantilever structure, which show a low output energy density. Thus, they are difficult to meet the requirements for self-powered electronics. Herein, we report a modified barbell-shaped piezoelectric energy harvester (BSPEH) based on two d33-mode cuboid Pb(In1/2Nb1/2)O3–Pb(Mg1/3Nb2/3)O3–PbTiO3 multilayer single crystal stacks (ten wafers with a thickness of 0.5 mm and d33 ∼ 1300 pC/N). Due to the electrically parallel and series connections of multilayer piezoelectric elements and the high figure-of-merit d33 × g33 of the single crystal, the maximum power density of BSPEH could reach 39.7 mW cm−3 (under an acceleration of 5 g), which is much higher than that of traditional cantilever piezoelectric energy harvesters (CPEHs), ∼0.1 mW cm−3. A maximum output voltage of 50.4 Vp–p was obtained when two crystal stacks are connected in series, and a maximum output current of 880 µA can be obtained when two crystal stacks are connected in parallel. Furthermore, the energy harvesting properties of BSPEH stay almost the same after 106 vibration cycles, while the properties of CPEH decrease 20% after 105 vibration cycles. This work indicates that BSPEH has a great potential in the application of wireless sensor networks for realizing the self-power of the equipment.
- 1 January 2021
- Published by AIP Publishing in APL Materials
- Vol. 9 (1) , 010703
Open AccessHigh output power density and strong vibration durability in a modified barbell-shaped energy harvester based on multilayer Pb(In1/2Nb1/2)O3–Pb(Mg1/3Nb2/3)O3–PbTiO3 single crystals
Traditional piezoelectric energy harvesters are made of piezoelectric ceramics with a cantilever structure, which show a low output energy density. Thus, they are difficult to meet the requirements for self-powered electronics. Herein, we report a modified barbell-shaped piezoelectric energy harvester (BSPEH) based on two d33-mode cuboid Pb(In1/2Nb1/2)O3–Pb(Mg1/3Nb2/3)O3–PbTiO3 multilayer single crystal stacks (ten wafers with a thickness of 0.5 mm and d33 ∼ 1300 pC/N). Due to the electrically parallel and series connections of multilayer piezoelectric elements and the high figure-of-merit d33 × g33 of the single crystal, the maximum power density of BSPEH could reach 39.7 mW cm−3 (under an acceleration of 5 g), which is much higher than that of traditional cantilever piezoelectric energy harvesters (CPEHs), ∼0.1 mW cm−3. A maximum output voltage of 50.4 Vp–p was obtained when two crystal stacks are connected in series, and a maximum output current of 880 µA can be obtained when two crystal stacks are connected in parallel. Furthermore, the energy harvesting properties of BSPEH stay almost the same after 106 vibration cycles, while the properties of CPEH decrease 20% after 105 vibration cycles. This work indicates that BSPEH has a great potential in the application of wireless sensor networks for realizing the self-power of the equipment.
- 11 February 2020
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 127 (6) , 064106
Enhanced dielectric and piezoelectric properties in the [001]-poled 0.25Pb(In1/2Nb1/2)O3-0.43Pb(Mg1/3Nb2/3)O3-0.32PbTiO3 single crystal near morphotropic phase boundary by alternating current treatment
In this paper, temperature dependance of induced dielectric and piezoelectric properties in the [001]-oriented predirect current poling (DCP) of the 0.25Pb(In1/2Nb1/2)O3-0.43Pb(Mg1/3Nb2/3)O3-0.32PbTiO3 (0.25PIN-0.43PMN-0.32PT) single crystals near morphotropic phase boundary was investigated using the alternating current treatment (ACT). By the optimized ACT conditions of 1 kV/mm at 50 Hz over 20 cycles, the dielectric permittivity (ɛ33T/ɛ0) and piezoelectric coefficient (d33) at room temperature of the DCP-ACT crystal were improved to be 7120 and 2610 pC/N, which were 48% and 54% higher than that of the DCP crystal (ɛ33T/ɛ0 = 4800, d33 = 1700 pC/N). Based on the temperature dependence of dielectric permittivity and dielectric loss of the DCP-ACT crystal, the induced monoclinic phases (MA and MC) were involved in the phase transition process from a rhombohedral phase to a tetragonal phase. The phase transition temperatures TR-MA of 116 °C of the DCP-ACT crystal showed about 10 °C higher than that of DCP. Meanwhile, ɛ33T/ɛ0 of the DCP-ACT crystal at TR-MA and in the tetragonal phase region, at around 110 °C and 130 °C, were 160% and 390% higher than those of the DCP crystal, respectively. The ultrahigh ɛ33T/ɛ0 = 17 000 of the DCP-ACT crystal at 130 °C may relate to the nanoscale heterogeneous polar-regions induced by ACT. The ACT is a promising way to enhance the dielectric and piezoelectric performance of the pre-DCP 0.25PIN-0.43PMN-0.32PT single crystals with broadened temperature range for device applications.
- 11 February 2020
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 127 (6) , 064106
Enhanced dielectric and piezoelectric properties in the [001]-poled 0.25Pb(In1/2Nb1/2)O3-0.43Pb(Mg1/3Nb2/3)O3-0.32PbTiO3 single crystal near morphotropic phase boundary by alternating current treatment
In this paper, temperature dependance of induced dielectric and piezoelectric properties in the [001]-oriented predirect current poling (DCP) of the 0.25Pb(In1/2Nb1/2)O3-0.43Pb(Mg1/3Nb2/3)O3-0.32PbTiO3 (0.25PIN-0.43PMN-0.32PT) single crystals near morphotropic phase boundary was investigated using the alternating current treatment (ACT). By the optimized ACT conditions of 1 kV/mm at 50 Hz over 20 cycles, the dielectric permittivity (ɛ33T/ɛ0) and piezoelectric coefficient (d33) at room temperature of the DCP-ACT crystal were improved to be 7120 and 2610 pC/N, which were 48% and 54% higher than that of the DCP crystal (ɛ33T/ɛ0 = 4800, d33 = 1700 pC/N). Based on the temperature dependence of dielectric permittivity and dielectric loss of the DCP-ACT crystal, the induced monoclinic phases (MA and MC) were involved in the phase transition process from a rhombohedral phase to a tetragonal phase. The phase transition temperatures TR-MA of 116 °C of the DCP-ACT crystal showed about 10 °C higher than that of DCP. Meanwhile, ɛ33T/ɛ0 of the DCP-ACT crystal at TR-MA and in the tetragonal phase region, at around 110 °C and 130 °C, were 160% and 390% higher than those of the DCP crystal, respectively. The ultrahigh ɛ33T/ɛ0 = 17 000 of the DCP-ACT crystal at 130 °C may relate to the nanoscale heterogeneous polar-regions induced by ACT. The ACT is a promising way to enhance the dielectric and piezoelectric performance of the pre-DCP 0.25PIN-0.43PMN-0.32PT single crystals with broadened temperature range for device applications.