João Otávio Donizette Malafatti
Research Interests
João Otávio Donizette Malafatti has a total of 99 co-authors. Here are the top co-authors by number of shared publications:
- Elaine Cristina Paris
Brazilian Agricultural Research Corporation, Embrapa Instrumentation
19 shared publications - Luiz Henrique Capparelli Mattoso
Nanotechnology National Laboratory for Agriculture (LNNA), Brazilian Agricultural Research Corporation, Embrapa Instrumentation, São Carlos, SP, Brazil
7 shared publications - Miryam Rincón- Joya
Departamento de Física, Universidad Nacional de Colombia, Bogotá, Colombia
6 shared publications - Ailton José Moreira
Institute of Chemistry, São Paulo State University (UNESP), Araraquara 14800-060, SP, Brazil
4 shared publications Elaine Cristina Paris
National Nanotechnology Laboratory for Agriculture (LNNA), Embrapa Instrumentação, São Carlos, Brazil
3 shared publicationsLaiza Gabriela Sanches Peres
National Nanotechnology Laboratory for Agriculture (LNNA) Embrapa Instrumentação São Carlos Brazil
3 shared publications
Latest Publications
- Open Access
- 29 June 2026
- Published by American Chemical Society (ACS) in ACS Omega
- Vol. 11 (27) , 40005-40017
A Simple, Organic Solvent-Free, and Scalable Process for Producing Calcium Alginate Nanoparticle Powder by High-Pressure Homogenization and Spray Drying
- 29 June 2026
- Published by American Chemical Society (ACS) in ACS Omega
- Vol. 11 (27) , 40005-40017
Open AccessA Simple, Organic Solvent-Free, and Scalable Process for Producing Calcium Alginate Nanoparticle Powder by High-Pressure Homogenization and Spray Drying
- Open Access
- 19 June 2026
- Published by Wiley in Energy & Environmental Materials
Fluorescence Behavior of Water‐Soluble Porphyrins Immobilized on LTA Zeolite and Its Chlorogenic Acid Polyphenol Sensing in Coffee Wastewater
Chlorogenic acid (CGA) is one of the most common polyphenols found in many fruits, such as coffee cherries, and is among the most economical commodities worldwide. In coffee production, processing and washing require large amounts of water, making wastewater monitoring essential to prevent environmental impact. This work reports the development of a fluorescence‐based hybrid sensor designed for the detection of CGA using water‐soluble porphyrins immobilized on hierarchical LTA zeolite. The system is based on 5,10,15,20‐tetrakis(N‐methyl‐4‐pyridyl)porphyrin (TMPyP) and its Zn(II)‐metallated derivative (ZnTMPyP), synthesized directly on the zeolite surface via ion‐exchange processes. The hybrid materials (LTA/TMPyP and Zn‐LTA/TMPyP) were fully characterized, confirming the preservation of the zeolite structure and the formation of the metalloporphyrin complex within the intercrystalline void network. Fluorescence measurements in phosphate buffer (pH 7.4) showed that Zn‐LTA/TMPyP exhibited the best performance for CGA detection, with a detection limit (LOD) of 0.22 nM. To mitigate potential interference from caffeine and caffeic acid, a novel sensing protocol was implemented using these compounds as a controlled background, maintaining high sensitivity (LOD = 0.64 nmol L ‐1 ). When tested in real coffee washing water, the sensor quantified CGA at 2.5 ± 0.7 nmol L ‐1 . The measurement accuracy was validated using a nonlinear standard addition method, yielding a recovery of 96.4%, confirming the sensor's ability to compensate for complex matrix effects. The results show that the Zn‐LTA/TMPyP hybrid material is a highly efficient, stable, and selective platform for CGA monitoring, with strong potential for integration into portable devices for environmental and agro‐industrial applications.
- 19 June 2026
- Published by Wiley in Energy & Environmental Materials
Open AccessFluorescence Behavior of Water‐Soluble Porphyrins Immobilized on LTA Zeolite and Its Chlorogenic Acid Polyphenol Sensing in Coffee Wastewater
Chlorogenic acid (CGA) is one of the most common polyphenols found in many fruits, such as coffee cherries, and is among the most economical commodities worldwide. In coffee production, processing and washing require large amounts of water, making wastewater monitoring essential to prevent environmental impact. This work reports the development of a fluorescence‐based hybrid sensor designed for the detection of CGA using water‐soluble porphyrins immobilized on hierarchical LTA zeolite. The system is based on 5,10,15,20‐tetrakis(N‐methyl‐4‐pyridyl)porphyrin (TMPyP) and its Zn(II)‐metallated derivative (ZnTMPyP), synthesized directly on the zeolite surface via ion‐exchange processes. The hybrid materials (LTA/TMPyP and Zn‐LTA/TMPyP) were fully characterized, confirming the preservation of the zeolite structure and the formation of the metalloporphyrin complex within the intercrystalline void network. Fluorescence measurements in phosphate buffer (pH 7.4) showed that Zn‐LTA/TMPyP exhibited the best performance for CGA detection, with a detection limit (LOD) of 0.22 nM. To mitigate potential interference from caffeine and caffeic acid, a novel sensing protocol was implemented using these compounds as a controlled background, maintaining high sensitivity (LOD = 0.64 nmol L ‐1 ). When tested in real coffee washing water, the sensor quantified CGA at 2.5 ± 0.7 nmol L ‐1 . The measurement accuracy was validated using a nonlinear standard addition method, yielding a recovery of 96.4%, confirming the sensor's ability to compensate for complex matrix effects. The results show that the Zn‐LTA/TMPyP hybrid material is a highly efficient, stable, and selective platform for CGA monitoring, with strong potential for integration into portable devices for environmental and agro‐industrial applications.
- Open Access
- 15 May 2026
- Published by Springer Nature in Applied Physics A
- Vol. 132 (6) , 507
Voltage-induced architectural control and interfacial phonon modulation in Cu–Fe functionalized TiO$_2$ nanotubesThis study explores the link between voltage-controlled architectural engineering and the resulting lattice dynamics in Cu–Fe functionalized TiO $$_2$$ nanotubes. By systematically tuning the anodization potential (30-40 V) and time (40-60 min), we successfully tailored the nanotubular morphology and interfacial structure, as verified by XRD, Raman spectroscopy, and SEM analyses. This work is to elucidate how these structural modifications influence govern the fundamental thermodynamic behavior of the system. Through temperature-dependent heat capacity ( $$C_p$$ ) measurements in the 2-300 K range, we reveal a complex vibrational beyond conventional. In the low-temperature regime, deviations from ideal Debye behavior by a Schottky-type contribution indicate a defect rich interfacial environment, where oxygen vacancies and structural disorder introduce discrete energy-level splittings. As temperature increases (50-210 K), a hybrid Debye-Einstein model suggests structural stiffening in the functionalized nanotubes. This effect is reflected in the upward shift of the characteristic phonon temperatures ( $$\theta _D$$ and $$\theta _E$$ ), indicating increased lattice rigidity and modified sound velocity within the nanotubular framework. Thermodynamic integration up to 298.15 K further demonstrates that the system’s free-energy balance is predominantly governed by vibrational entropy rather than internal energy accumulation. These results suggest that the performance of functionalized semiconductors arises not solely from composition, but from nanoscale architectural features that influence phonon-related behavior.- 15 May 2026
- Published by Springer Nature in Applied Physics A
- Vol. 132 (6) , 507
Open AccessVoltage-induced architectural control and interfacial phonon modulation in Cu–Fe functionalized TiO$_2$ nanotubesThis study explores the link between voltage-controlled architectural engineering and the resulting lattice dynamics in Cu–Fe functionalized TiO $$_2$$ nanotubes. By systematically tuning the anodization potential (30-40 V) and time (40-60 min), we successfully tailored the nanotubular morphology and interfacial structure, as verified by XRD, Raman spectroscopy, and SEM analyses. This work is to elucidate how these structural modifications influence govern the fundamental thermodynamic behavior of the system. Through temperature-dependent heat capacity ( $$C_p$$ ) measurements in the 2-300 K range, we reveal a complex vibrational beyond conventional. In the low-temperature regime, deviations from ideal Debye behavior by a Schottky-type contribution indicate a defect rich interfacial environment, where oxygen vacancies and structural disorder introduce discrete energy-level splittings. As temperature increases (50-210 K), a hybrid Debye-Einstein model suggests structural stiffening in the functionalized nanotubes. This effect is reflected in the upward shift of the characteristic phonon temperatures ( $$\theta _D$$ and $$\theta _E$$ ), indicating increased lattice rigidity and modified sound velocity within the nanotubular framework. Thermodynamic integration up to 298.15 K further demonstrates that the system’s free-energy balance is predominantly governed by vibrational entropy rather than internal energy accumulation. These results suggest that the performance of functionalized semiconductors arises not solely from composition, but from nanoscale architectural features that influence phonon-related behavior. - Open Access
- 13 May 2026
- Published by Springer Nature in Environmental Monitoring and Assessment
- Vol. 198 (6) , 582
Simple colorimetric monitoring of chlorogenic acid in coffee washing water using Ag-modified faujasite zeolite
Silver-based materials are widely recognized for their optical, electronic, and chemical properties, which make them attractive for sensing applications. Among these materials, silver-modified zeolites stand out due to their high surface area, chemical and dispersion stability, and the possibility of tailoring surface interactions to improve affinity toward specific analytes. In this study, a faujasite zeolite framework modified with silver ions (AgFAU) is investigated for colorimetric sensing of chlorogenic acid (CGA). The detection was carried out using a digital image colorimetry (DIC) approach, in which red, green, and blue (RGB) parameters were used for the quantitative optical analysis of colored dispersions. Based on the DIC analysis, CGA could be quantitatively monitored in the concentration range of 1–20 mg L −1 , with a limit of detection in the range of 0.47–1.17 mg L −1 (average, 0.8 ± 0.3 mg L −1 ), consistent with values reported for similar colorimetric sensors. The proposed approach was successfully applied to the detection of CGA in coffee wastewater. In addition, the system showed good specificity toward structurally related polyphenols and high reproducibility (RSD ≤ 6%), demonstrating its suitability as a simple and easy-to-interpret strategy for CGA monitoring.
- 13 May 2026
- Published by Springer Nature in Environmental Monitoring and Assessment
- Vol. 198 (6) , 582
Open AccessSimple colorimetric monitoring of chlorogenic acid in coffee washing water using Ag-modified faujasite zeolite
Silver-based materials are widely recognized for their optical, electronic, and chemical properties, which make them attractive for sensing applications. Among these materials, silver-modified zeolites stand out due to their high surface area, chemical and dispersion stability, and the possibility of tailoring surface interactions to improve affinity toward specific analytes. In this study, a faujasite zeolite framework modified with silver ions (AgFAU) is investigated for colorimetric sensing of chlorogenic acid (CGA). The detection was carried out using a digital image colorimetry (DIC) approach, in which red, green, and blue (RGB) parameters were used for the quantitative optical analysis of colored dispersions. Based on the DIC analysis, CGA could be quantitatively monitored in the concentration range of 1–20 mg L −1 , with a limit of detection in the range of 0.47–1.17 mg L −1 (average, 0.8 ± 0.3 mg L −1 ), consistent with values reported for similar colorimetric sensors. The proposed approach was successfully applied to the detection of CGA in coffee wastewater. In addition, the system showed good specificity toward structurally related polyphenols and high reproducibility (RSD ≤ 6%), demonstrating its suitability as a simple and easy-to-interpret strategy for CGA monitoring.
- Open Access
Synthesis and Characterization of CaFe2O4: Catalytic and Bactericidal Evaluation at High Temperatures
CaFe2O4 is a p-type ferrite semiconductor of interest for photo-assisted environmental remediation due to its narrow band gap and high chemical stability. In this work, CaFe2O4 powders were synthesized via the Pechini polymeric precursor method and calcined between 550 and 850 °C to investigate the influence of calcination temperature on structural order and material properties. X-ray diffraction combined with Rietveld refinement revealed the progressive stabilization of the orthorhombic Pnma phase, accompanied by relaxation of the FeO6 octahedral framework. Raman and FT-IR spectroscopies confirmed a significant increase in vibrational coherence with increasing calcination temperature, quantified by a nearly three-fold increase in the global Raman order parameter and phonon lifetimes. Nitrogen physisorption showed a modest specific surface area and a pore system dominated by interparticle meso–macroporosity, typical of thermally treated ferrites. Removal tests using ciprofloxacin under UV-A irradiation showed limited photo-assisted activity, while agar diffusion assays against Escherichia coli and Staphylococcus aureus revealed no inhibition halos, indicating the absence of detectable antibacterial activity under the experimental conditions employed. Overall, CaFe2O4 combines photo-assisted response with good structural stability, highlighting its potential as a chemically stable ceramic material with no detectable antibacterial activity under the tested conditions.
Open AccessSynthesis and Characterization of CaFe2O4: Catalytic and Bactericidal Evaluation at High Temperatures
CaFe2O4 is a p-type ferrite semiconductor of interest for photo-assisted environmental remediation due to its narrow band gap and high chemical stability. In this work, CaFe2O4 powders were synthesized via the Pechini polymeric precursor method and calcined between 550 and 850 °C to investigate the influence of calcination temperature on structural order and material properties. X-ray diffraction combined with Rietveld refinement revealed the progressive stabilization of the orthorhombic Pnma phase, accompanied by relaxation of the FeO6 octahedral framework. Raman and FT-IR spectroscopies confirmed a significant increase in vibrational coherence with increasing calcination temperature, quantified by a nearly three-fold increase in the global Raman order parameter and phonon lifetimes. Nitrogen physisorption showed a modest specific surface area and a pore system dominated by interparticle meso–macroporosity, typical of thermally treated ferrites. Removal tests using ciprofloxacin under UV-A irradiation showed limited photo-assisted activity, while agar diffusion assays against Escherichia coli and Staphylococcus aureus revealed no inhibition halos, indicating the absence of detectable antibacterial activity under the experimental conditions employed. Overall, CaFe2O4 combines photo-assisted response with good structural stability, highlighting its potential as a chemically stable ceramic material with no detectable antibacterial activity under the tested conditions.
- Open Access
- 26 November 2025
- Published by American Chemical Society (ACS) in ACS Omega
- Vol. 10 (48) , 58346-58359
Starch Films Reinforced with Amazonian Manganese Ore Residues: Mechanical, Water Vapor Barrier, and UV-Shielding Performance
Mining waste-derived reinforcing materials represent a sustainable strategy for enhancing the performance of packaging composites. Incorporating mining tailings and low-end nanomaterials synthesized from these residues into polymer-based films combines low-cost manufacturing with circular economy principles. In this study, manganese ore beneficiation waste and two manganese-based compounds synthesized from the same tailings, namely, manganese ore tailings (RBK), BaMnO4, and MnO2, were evaluated as reinforcing agents in casting starch films suitable for packaging applications (e.g., shopping bags). These materials were incorporated at concentrations ranging from 0.25 to 1% (w w–1). The addition of RBK and BaMnO4 significantly reduced the water vapor permeability (WVP) of the starch films from 4.9 ± 0.9 × 10–10 to 2.5 ± 0.5 × 10–10 and 2.8 ± 0.5 × 10–10 kg m–1 s–1 Pa–1, respectively. BaMnO4 also notably enhanced tensile strength, increasing it from 3.5 ± 0.2 to 20 ± 4 MPa, regardless of concentration. Additionally, 1% (w w–1) δ-MnO2 produced broad near-UV/visible attenuation, whereas RBK and BaMnO4 primarily strengthened the UVB barrier, these changes being accomplished with a higher opacity (600 nm). Overall, the incorporation of manganese-based materials derived directly from manganese ore beneficiation residues shows strong potential for improving the functional properties of starch films, enabling the development of low-cost, value-added, and environmentally responsible packaging materials. Furthermore, the reuse of mining waste contributes to mitigating the environmental impact associated with tailings storage.
- 26 November 2025
- Published by American Chemical Society (ACS) in ACS Omega
- Vol. 10 (48) , 58346-58359
Open AccessStarch Films Reinforced with Amazonian Manganese Ore Residues: Mechanical, Water Vapor Barrier, and UV-Shielding Performance
Mining waste-derived reinforcing materials represent a sustainable strategy for enhancing the performance of packaging composites. Incorporating mining tailings and low-end nanomaterials synthesized from these residues into polymer-based films combines low-cost manufacturing with circular economy principles. In this study, manganese ore beneficiation waste and two manganese-based compounds synthesized from the same tailings, namely, manganese ore tailings (RBK), BaMnO4, and MnO2, were evaluated as reinforcing agents in casting starch films suitable for packaging applications (e.g., shopping bags). These materials were incorporated at concentrations ranging from 0.25 to 1% (w w–1). The addition of RBK and BaMnO4 significantly reduced the water vapor permeability (WVP) of the starch films from 4.9 ± 0.9 × 10–10 to 2.5 ± 0.5 × 10–10 and 2.8 ± 0.5 × 10–10 kg m–1 s–1 Pa–1, respectively. BaMnO4 also notably enhanced tensile strength, increasing it from 3.5 ± 0.2 to 20 ± 4 MPa, regardless of concentration. Additionally, 1% (w w–1) δ-MnO2 produced broad near-UV/visible attenuation, whereas RBK and BaMnO4 primarily strengthened the UVB barrier, these changes being accomplished with a higher opacity (600 nm). Overall, the incorporation of manganese-based materials derived directly from manganese ore beneficiation residues shows strong potential for improving the functional properties of starch films, enabling the development of low-cost, value-added, and environmentally responsible packaging materials. Furthermore, the reuse of mining waste contributes to mitigating the environmental impact associated with tailings storage.
- 10 June 2025
- Published by Springer Nature in Journal of Inorganic and Organometallic Polymers and Materials
- Vol. 35 (12) , 9746-9761
Copper-Modified Faujasite Zeolite Reinforcement in Biodegradable Starch Sachets for Potassium Fertilizer Releasing
- 10 June 2025
- Published by Springer Nature in Journal of Inorganic and Organometallic Polymers and Materials
- Vol. 35 (12) , 9746-9761
Copper-Modified Faujasite Zeolite Reinforcement in Biodegradable Starch Sachets for Potassium Fertilizer Releasing
- Open Access
Hydrotalcite Supported on Polycaprolactone:Poly(methyl methacrylate) Fiber Membranes for Chlorogenic Acid Removal
Polyphenols are organic molecules extracted from various fruits, such as coffee and citrus, that possess biological activity and antioxidant properties. However, the presence of polyphenols in the environment is hazardous to water quality and living health. Among a variety of water remediation methods, adsorption remains a staple in the field. Therefore, this work aims to develop porous polycaprolactone: poly(methyl methacrylate) (PCL:PMMA) membranes as a support for hydrotalcite immobilization for the removal of chlorogenic acid polyphenol (CGA) from aqueous solutions. Due to the hydrophilic nature of hydrotalcite, the adsorbent was functionalized with hexadecyltrimethylammonium bromide (CTAB) to increase its affinity for CGA, resulting in a removal efficiency of approximately 96%. Composite fiber membranes were prepared by solution-blowing spinning with specific amounts of hydrotalcite added (i.e., 1 to 60 wt%). A 3:1 PCL:PMMA blend resulted in superior mechanical traction (0.8 MPa) and stress deformation (70%) compared to pure PCL (0.7 MPa and 37%) and PMMA (0.1 MPa and 5%) fibers. PCL:PMMA membranes with 60% LDH-CTAB exhibited CGA removal rates equal to 55% in the first cycle while maintaining the capacity to remove 30% of the polyphenol after five consecutive reuses. Removal rates up to 90% could also be achieved with an appropriate adsorbent dose (2 g L−1). Adsorption was found to follow pseudo-second-order kinetics and was adequately described by the Langmuir model, saturating LDH-CTAB active sites in four hours. PCL:PMMA:LDH-CTAB composites can be considered a potential alternative to support adsorbents for water remediation.
Open AccessHydrotalcite Supported on Polycaprolactone:Poly(methyl methacrylate) Fiber Membranes for Chlorogenic Acid Removal
Polyphenols are organic molecules extracted from various fruits, such as coffee and citrus, that possess biological activity and antioxidant properties. However, the presence of polyphenols in the environment is hazardous to water quality and living health. Among a variety of water remediation methods, adsorption remains a staple in the field. Therefore, this work aims to develop porous polycaprolactone: poly(methyl methacrylate) (PCL:PMMA) membranes as a support for hydrotalcite immobilization for the removal of chlorogenic acid polyphenol (CGA) from aqueous solutions. Due to the hydrophilic nature of hydrotalcite, the adsorbent was functionalized with hexadecyltrimethylammonium bromide (CTAB) to increase its affinity for CGA, resulting in a removal efficiency of approximately 96%. Composite fiber membranes were prepared by solution-blowing spinning with specific amounts of hydrotalcite added (i.e., 1 to 60 wt%). A 3:1 PCL:PMMA blend resulted in superior mechanical traction (0.8 MPa) and stress deformation (70%) compared to pure PCL (0.7 MPa and 37%) and PMMA (0.1 MPa and 5%) fibers. PCL:PMMA membranes with 60% LDH-CTAB exhibited CGA removal rates equal to 55% in the first cycle while maintaining the capacity to remove 30% of the polyphenol after five consecutive reuses. Removal rates up to 90% could also be achieved with an appropriate adsorbent dose (2 g L−1). Adsorption was found to follow pseudo-second-order kinetics and was adequately described by the Langmuir model, saturating LDH-CTAB active sites in four hours. PCL:PMMA:LDH-CTAB composites can be considered a potential alternative to support adsorbents for water remediation.
- 18 February 2025
- Published by Wiley in Packaging Technology and Science
- Vol. 38 (5) , 393-406
Effects on Physicochemical and Microbiological Properties of Coconut Water Packaged in Silver‐Based Materials
Coconut water is a fresh and popular drink that is attractive to consumers worldwide. Packaging development is essential to improve product quality, protect against microorganism contamination and preserve their physical‐chemistry properties. Silver nanoparticles (AgNPs) are excellent actives applied in studies of food packaging, exhibiting great antimicrobial activity and reinforcement properties in polymeric matrices. The current work goals are to evaluate AgNPs supported on carriers, silica (SiO2) and hydroxyapatite (Hap) in the linear low‐density polyethylene (LLDPE) polymer obtained nanocomposite materials (LLDPE/AgNPs) to coconut water packaging. Thus, the present assay ascertained if adding these active agents in a commercial material (LLDPE) may improve coconut water's physicochemical and microbiological characteristics. The processing obtained the packaging composites at two concentrations (0.4% and 0.6%) by extrusion methodology. The pasteurized coconut water was packaged and monitored during 35 days of storage at temperatures above the recommended (7°C). The physicochemical analyses of coconut water verified the maintenance of pH, titratable acidity, soluble solids content, colour, turbidity, phenolic compounds, antioxidant activities, reducing and nonreducing sugars and minerals. Microbiological analyses were performed to detect the growth of psychrotrophic, moulds and yeasts, enterobacteria and Salmonella spp. The results showed that the AgNPs supported in both particles did not affect coconut water's physical and chemical characteristics compared to the LLDPE control. Concerning microbial growth, adding particles reduced the product's microbial load. Thus, the LLDPE/AgNPs packages obtained in this work demonstrated a potential application as commercial material to coconut water that can preserve the intrinsic physicochemical and improve the microbiological quality.
- 18 February 2025
- Published by Wiley in Packaging Technology and Science
- Vol. 38 (5) , 393-406
Effects on Physicochemical and Microbiological Properties of Coconut Water Packaged in Silver‐Based Materials
Coconut water is a fresh and popular drink that is attractive to consumers worldwide. Packaging development is essential to improve product quality, protect against microorganism contamination and preserve their physical‐chemistry properties. Silver nanoparticles (AgNPs) are excellent actives applied in studies of food packaging, exhibiting great antimicrobial activity and reinforcement properties in polymeric matrices. The current work goals are to evaluate AgNPs supported on carriers, silica (SiO2) and hydroxyapatite (Hap) in the linear low‐density polyethylene (LLDPE) polymer obtained nanocomposite materials (LLDPE/AgNPs) to coconut water packaging. Thus, the present assay ascertained if adding these active agents in a commercial material (LLDPE) may improve coconut water's physicochemical and microbiological characteristics. The processing obtained the packaging composites at two concentrations (0.4% and 0.6%) by extrusion methodology. The pasteurized coconut water was packaged and monitored during 35 days of storage at temperatures above the recommended (7°C). The physicochemical analyses of coconut water verified the maintenance of pH, titratable acidity, soluble solids content, colour, turbidity, phenolic compounds, antioxidant activities, reducing and nonreducing sugars and minerals. Microbiological analyses were performed to detect the growth of psychrotrophic, moulds and yeasts, enterobacteria and Salmonella spp. The results showed that the AgNPs supported in both particles did not affect coconut water's physical and chemical characteristics compared to the LLDPE control. Concerning microbial growth, adding particles reduced the product's microbial load. Thus, the LLDPE/AgNPs packages obtained in this work demonstrated a potential application as commercial material to coconut water that can preserve the intrinsic physicochemical and improve the microbiological quality.
- Open Access
- 1 January 2024
- Published by AMA Service GmbH
- p. 407-408
PT5.255 - Colorimetric sensor based on silver faujasite for chlorogen-ic acid polyphenol detection
Silver-based materials show a great potential to be applied in sensors due to their optical, electronic, and chemical properties. In this work, we report the use of a zeolite framework modified with silver ions as a colorimetric sensing array for the detection of chlorogenic acid (CGA). The detection was done by digital image colorimetry (DIC) based technique integrated with a smartphone. Red, green, and blue (RGB) was able to monitor CGA in the range of 1-20 mg L-1. with the limit of detection (LOD) of 0.39 mg L-1 .
- 1 January 2024
- Published by AMA Service GmbH
- p. 407-408
Open AccessPT5.255 - Colorimetric sensor based on silver faujasite for chlorogen-ic acid polyphenol detection
Silver-based materials show a great potential to be applied in sensors due to their optical, electronic, and chemical properties. In this work, we report the use of a zeolite framework modified with silver ions as a colorimetric sensing array for the detection of chlorogenic acid (CGA). The detection was done by digital image colorimetry (DIC) based technique integrated with a smartphone. Red, green, and blue (RGB) was able to monitor CGA in the range of 1-20 mg L-1. with the limit of detection (LOD) of 0.39 mg L-1 .