Serhii Turpak
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Serhii Turpak has a total of 39 co-authors. Here are the top co-authors by number of shared publications:
- Oleksij Fomin
State University of Infrastructure and Technologies
6 shared publications - Larysa Vasylieva
Zaporizhzhia Polytechnic National University
4 shared publications - Olena Ostrohliad
National University Zaporizhzhia Polytechnic
4 shared publications - Alyona Lovska
Український державний університет залізничного транспорту, Україна
2 shared publications - Anna M. Fomina
Pryazovskyi State Technical University
2 shared publications - Ihor Taran
Department of Roads and Bridges, Faculty of Civil and Environmental Engineering and Architecture, Rzeszow University of Technology, 35-959 Rzeszow, Poland
2 shared publications
Latest Publications
- 27 October 2026
- Published by Dnipro University of Technology in Naukovyi Visnyk Natsionalnoho Hirnychoho Universytetu
- No. 5,p. 74-81
Improving the dynamic stability of wagons when transporting rock mass
Purpose. To theoretically substantiate and develop technical solutions to increase the dynamic stability of wagons when transporting rock mass by reducing the amplitudes of body vibrations and optimizing the interaction parameters in the “track ‒ wagon ‒ cargo” system. Methodology. The work uses a systematic approach using classical mechanics methods to construct differential equations of motion, numerical integration (Runge‒Kutta method) and the finite element method to analyze the stress-strain state of structures. The mathematical model takes into account a multi-stage dynamic system (up to 12 degrees of freedom), random track irregularities and the mobility of bulk cargo. Findings. As a result of the study, the dependencies between the parameters of the spring suspension and the level of dynamic stability of wagons were established, and the feasibility of using progressive stiffness characteristics and improved vibration dampers was substantiated. Constructive solutions using composite materials are proposed, which provide a reduction in the dynamics coefficient by 12–17 % and a reduction in life cycle costs by 12–15 %. Originality. The scientific novelty consists in the development of an integrated mathematical model of wagon dynamics, which takes into account the interaction of the “track ‒ wagon ‒ cargo” system, the random nature of disturbances and the variable center of mass of bulk cargo. Approaches to assessing the stability against overturning and optimizing the parameters of composite load-bearing structures and spring suspension have been improved. Practical value. The practical significance of the work lies in the possibility of implementing the proposed constructive and technological solutions to modernize the existing wagon fleet, increase traffic safety and reduce operating costs. The results obtained can be used in the design of new wagons and the improvement of systems for diagnosing the technical condition of rolling stock in mining transportation conditions.
- 27 October 2026
- Published by Dnipro University of Technology in Naukovyi Visnyk Natsionalnoho Hirnychoho Universytetu
- No. 5,p. 74-81
Improving the dynamic stability of wagons when transporting rock mass
Purpose. To theoretically substantiate and develop technical solutions to increase the dynamic stability of wagons when transporting rock mass by reducing the amplitudes of body vibrations and optimizing the interaction parameters in the “track ‒ wagon ‒ cargo” system. Methodology. The work uses a systematic approach using classical mechanics methods to construct differential equations of motion, numerical integration (Runge‒Kutta method) and the finite element method to analyze the stress-strain state of structures. The mathematical model takes into account a multi-stage dynamic system (up to 12 degrees of freedom), random track irregularities and the mobility of bulk cargo. Findings. As a result of the study, the dependencies between the parameters of the spring suspension and the level of dynamic stability of wagons were established, and the feasibility of using progressive stiffness characteristics and improved vibration dampers was substantiated. Constructive solutions using composite materials are proposed, which provide a reduction in the dynamics coefficient by 12–17 % and a reduction in life cycle costs by 12–15 %. Originality. The scientific novelty consists in the development of an integrated mathematical model of wagon dynamics, which takes into account the interaction of the “track ‒ wagon ‒ cargo” system, the random nature of disturbances and the variable center of mass of bulk cargo. Approaches to assessing the stability against overturning and optimizing the parameters of composite load-bearing structures and spring suspension have been improved. Practical value. The practical significance of the work lies in the possibility of implementing the proposed constructive and technological solutions to modernize the existing wagon fleet, increase traffic safety and reduce operating costs. The results obtained can be used in the design of new wagons and the improvement of systems for diagnosing the technical condition of rolling stock in mining transportation conditions.
- 28 September 2026
- Published by Taylor & Francis in Maritime Policy & Management
- p. 1-26
Data-driven analytical framework for optimization of technical and operational efficiency in liner shipping
- 28 September 2026
- Published by Taylor & Francis in Maritime Policy & Management
- p. 1-26
Data-driven analytical framework for optimization of technical and operational efficiency in liner shipping
- 14 July 2026
- Published by Springer Nature
- p. 221-239
Ultrasonic and Acoustic Methods for Non-destructive Thickness Measurement of Railway and Marine Tank Boilers
- 14 July 2026
- Published by Springer Nature
- p. 221-239
Ultrasonic and Acoustic Methods for Non-destructive Thickness Measurement of Railway and Marine Tank Boilers
- 8 June 2026
- Published by Lviv Polytechnic National University in Transport technologies
- Vol. 7 (1) , 49-58
A transportation planning method considering the parameters of the city logistics transport network and variability of traffic flow organization
This study presents a comprehensive approach to determining the transportation planning method, accounting for network parameters of the city logistics systems and flexible traffic organization. This method considers the rapid change in the operational situation under martial law, allowing for adaptation of routes and means of transport to changing operating conditions, in particular restrictions that arise in the event of martial law, such as curfews and power outages. The efficiency of different transport modes, including diesel buses, electric buses, and trolleybuses with autonomous range is considered, along with the influence of external factors such as air temperature, traffic density, and infrastructure damage. The optimality criterion is defined as the minimization of transportation costs, accounting for energy consumption, carbon footprint, and transport reliability. As a case study, routes for employee transport to the industrial zone of Zaporizhzhia were examined, a representative subsystem was identified, and its performance was assessed. The developed method allows for an increase in transport service efficiency, a reduction in delays and environmental impact, thereby ensuring the implementation of sustainable urban development goals. The relevance of the study is determined by the need to ensure the reliable functioning of commuting systems for enterprise employees under conditions of limited transport infrastructure and unstable energy supply. Under such conditions, it is important to substantiate the parameters of transport service organization, accounting for route network characteristics, means of transport, and external factors. The study considers factors affecting transportation efficiency, including transport demand volumes, route lengths, vehicle occupancy, operating conditions, and the likelihood of schedule deviations. This enables assessment of the transport subsystem's operating conditions. A method for optimizing transportation system parameters is proposed that minimizes operating costs while accounting for reliability and environmental factors. The approach was applied to the transportation of employees to industrial enterprises in Zaporizhzhia. The results obtained confirm increased efficiency of transportation planning and greater stability of the transport subsystem’s functioning.
- 8 June 2026
- Published by Lviv Polytechnic National University in Transport technologies
- Vol. 7 (1) , 49-58
A transportation planning method considering the parameters of the city logistics transport network and variability of traffic flow organization
This study presents a comprehensive approach to determining the transportation planning method, accounting for network parameters of the city logistics systems and flexible traffic organization. This method considers the rapid change in the operational situation under martial law, allowing for adaptation of routes and means of transport to changing operating conditions, in particular restrictions that arise in the event of martial law, such as curfews and power outages. The efficiency of different transport modes, including diesel buses, electric buses, and trolleybuses with autonomous range is considered, along with the influence of external factors such as air temperature, traffic density, and infrastructure damage. The optimality criterion is defined as the minimization of transportation costs, accounting for energy consumption, carbon footprint, and transport reliability. As a case study, routes for employee transport to the industrial zone of Zaporizhzhia were examined, a representative subsystem was identified, and its performance was assessed. The developed method allows for an increase in transport service efficiency, a reduction in delays and environmental impact, thereby ensuring the implementation of sustainable urban development goals. The relevance of the study is determined by the need to ensure the reliable functioning of commuting systems for enterprise employees under conditions of limited transport infrastructure and unstable energy supply. Under such conditions, it is important to substantiate the parameters of transport service organization, accounting for route network characteristics, means of transport, and external factors. The study considers factors affecting transportation efficiency, including transport demand volumes, route lengths, vehicle occupancy, operating conditions, and the likelihood of schedule deviations. This enables assessment of the transport subsystem's operating conditions. A method for optimizing transportation system parameters is proposed that minimizes operating costs while accounting for reliability and environmental factors. The approach was applied to the transportation of employees to industrial enterprises in Zaporizhzhia. The results obtained confirm increased efficiency of transportation planning and greater stability of the transport subsystem’s functioning.
- 1 May 2026
- Published by Ukrainian Scientific Railway Car Building Research Institute
- No. 32
ECONOMIC AND MATHEMATICAL SUBSTITUTION OF REDUCING THE COST OF TRANSPORTATION IN THE INTERACTION NODES OF ROAD AND RAIL INDUSTRIAL TRANSPORT
У статті розглянуто актуальну науково-прикладну проблему зниження собівартості перевезень у вузлах взаємодії автомобільного та залізничного промислового транспорту. Обґрунтовано, що транспортна складова є однією з ключових у структурі витрат промислових підприємств, а її оптимізація безпосередньо впливає на конкурентоспроможність продукції. Особливу увагу приділено мультимодальним вузлам, де відбувається стикування різних видів транспорту та концентруються основні логістичні операції. Встановлено, що неузгодженість роботи транспортних систем призводить до простоїв, неефективного використання ресурсів і зростання експлуатаційних витрат. Метою дослідження є розробка економіко-математичної моделі мініміза-ції собівартості перевезень шляхом оптимізації взаємодії автомобільного та залізничного транспорту. Для досягнення поставленої мети використано методи системного аналізу, економіко-математичного моделювання, статистичної обробки даних, а також методи цільового програмування. Об’єктом дослідження виступають процеси формування витрат у мультимодальних транспортних вузлах, а предметом – математичні інструменти оптимізації логістичних витрат. Запропоновано структуру витрат у вузлах взаємодії, яка включає транс-портну складову, витрати на перевантаження та витрати на зберігання і очікування. На основі цієї структури сформовано цільову функцію мінімізації сукупних логістичних витрат із урахуванням обмежень пропускної здатності, балансу вантажопотоків і мінімальних партій перевезень. Розроблена модель дозволяє враховувати ефект масштабу, який проявляється у зниженні питомих витрат при консолідації вантажів та використанні залізничного транспорту для магістральних перевезень. Особливістю дослідження є врахування часових параметрів, що вплива-ють на економічні показники, а також введення екологічної складової у ви-гляді витрат на викиди. Це дозволяє більш комплексно оцінювати ефектив-ність транспортних рішень. Встановлено умови доцільності використання мультимодальних схем перевезень, зокрема визначено оптимальні відстані та обсяги партій вантажу для переходу від автомобільного транспорту до комбінованого. Результати дослідження підтверджують, що використання економіко-математичних моделей є ефективним інструментом для управління транс-портними витратами. Практичні розрахунки демонструють можливість зниження собівартості перевезень на 8–10% навіть без значних капітальних вкладень, за рахунок оптимізації організаційних процесів. Отримані результати мають важливе значення для підприємств промислового сектору та можуть бути використані при плануванні логістичних систем і розвитку транспортної інфраструктури.
- 1 May 2026
- Published by Ukrainian Scientific Railway Car Building Research Institute
- No. 32
ECONOMIC AND MATHEMATICAL SUBSTITUTION OF REDUCING THE COST OF TRANSPORTATION IN THE INTERACTION NODES OF ROAD AND RAIL INDUSTRIAL TRANSPORT
У статті розглянуто актуальну науково-прикладну проблему зниження собівартості перевезень у вузлах взаємодії автомобільного та залізничного промислового транспорту. Обґрунтовано, що транспортна складова є однією з ключових у структурі витрат промислових підприємств, а її оптимізація безпосередньо впливає на конкурентоспроможність продукції. Особливу увагу приділено мультимодальним вузлам, де відбувається стикування різних видів транспорту та концентруються основні логістичні операції. Встановлено, що неузгодженість роботи транспортних систем призводить до простоїв, неефективного використання ресурсів і зростання експлуатаційних витрат. Метою дослідження є розробка економіко-математичної моделі мініміза-ції собівартості перевезень шляхом оптимізації взаємодії автомобільного та залізничного транспорту. Для досягнення поставленої мети використано методи системного аналізу, економіко-математичного моделювання, статистичної обробки даних, а також методи цільового програмування. Об’єктом дослідження виступають процеси формування витрат у мультимодальних транспортних вузлах, а предметом – математичні інструменти оптимізації логістичних витрат. Запропоновано структуру витрат у вузлах взаємодії, яка включає транс-портну складову, витрати на перевантаження та витрати на зберігання і очікування. На основі цієї структури сформовано цільову функцію мінімізації сукупних логістичних витрат із урахуванням обмежень пропускної здатності, балансу вантажопотоків і мінімальних партій перевезень. Розроблена модель дозволяє враховувати ефект масштабу, який проявляється у зниженні питомих витрат при консолідації вантажів та використанні залізничного транспорту для магістральних перевезень. Особливістю дослідження є врахування часових параметрів, що вплива-ють на економічні показники, а також введення екологічної складової у ви-гляді витрат на викиди. Це дозволяє більш комплексно оцінювати ефектив-ність транспортних рішень. Встановлено умови доцільності використання мультимодальних схем перевезень, зокрема визначено оптимальні відстані та обсяги партій вантажу для переходу від автомобільного транспорту до комбінованого. Результати дослідження підтверджують, що використання економіко-математичних моделей є ефективним інструментом для управління транс-портними витратами. Практичні розрахунки демонструють можливість зниження собівартості перевезень на 8–10% навіть без значних капітальних вкладень, за рахунок оптимізації організаційних процесів. Отримані результати мають важливе значення для підприємств промислового сектору та можуть бути використані при плануванні логістичних систем і розвитку транспортної інфраструктури.
- 30 March 2025
- Published by Springer Nature
- p. 256-267
Updated Warehouse Logistics in Space-Constrained Environments Using Routing and Technical Solutions
- 30 March 2025
- Published by Springer Nature
- p. 256-267
Updated Warehouse Logistics in Space-Constrained Environments Using Routing and Technical Solutions
- 30 December 2024
- Published by Dnipro University of Technology in Naukovyi Visnyk Natsionalnoho Hirnychoho Universytetu
- No. 6,p. 143-150
Improving the efficiency of management of transport and energy resources of the logistics system of an industrial enterprise
Purpose. To define peculiarities of the processes and indicators of the functioning of the transport and warehouse logistics system (TWLS) of industrial enterprises using a simulation model that takes into account the need to implement a cargo delivery plan to warehouses in conditions of restoring the flowability of cargo during unloading, in order to determine the optimal operating parameters based on the criterion of minimum costs. Methodology. To build a model of the functioning of the transport-warehouse logistics system of unloading raw materials at the enterprise, the method of simulation modelling was used, statistical analysis was used to establish the laws of distribution of the input parameters of the model. The assessment of the use of energy resources was carried out using a regression analysis of the duration of heating of various types of cargo at industrial enterprises. Findings. The conducted experiments on the developed simulation model made it possible to determine the rational number of used resources – locomotives and cargo heating chambers when they freeze. Due to the use of the proposed methods and model, the efficiency of the management of transport and energy resources of the logistics system of an industrial enterprise has been increased. Originality. The developed simulation model of the functioning of the raw material and fuel unloading subsystem, unlike the existing ones, takes into account the peculiarities of the transport and storage process in the cold period of the year and allows determining the rational number of transport and auxiliary resources, taking into account the influence of external factors. Practical value. The obtained results make it possible to increase the efficiency of the TWLS operation of industrial enterprises due to the development of methods based on the logistic approach to the management of transport-warehouse processes. The simulation model of the management of the heating and unloading process allows you to determine the most economical mode of operation of transport and warehouse logistics systems of industrial enterprises by determining the rational number of involved resources.
- 30 December 2024
- Published by Dnipro University of Technology in Naukovyi Visnyk Natsionalnoho Hirnychoho Universytetu
- No. 6,p. 143-150
Improving the efficiency of management of transport and energy resources of the logistics system of an industrial enterprise
Purpose. To define peculiarities of the processes and indicators of the functioning of the transport and warehouse logistics system (TWLS) of industrial enterprises using a simulation model that takes into account the need to implement a cargo delivery plan to warehouses in conditions of restoring the flowability of cargo during unloading, in order to determine the optimal operating parameters based on the criterion of minimum costs. Methodology. To build a model of the functioning of the transport-warehouse logistics system of unloading raw materials at the enterprise, the method of simulation modelling was used, statistical analysis was used to establish the laws of distribution of the input parameters of the model. The assessment of the use of energy resources was carried out using a regression analysis of the duration of heating of various types of cargo at industrial enterprises. Findings. The conducted experiments on the developed simulation model made it possible to determine the rational number of used resources – locomotives and cargo heating chambers when they freeze. Due to the use of the proposed methods and model, the efficiency of the management of transport and energy resources of the logistics system of an industrial enterprise has been increased. Originality. The developed simulation model of the functioning of the raw material and fuel unloading subsystem, unlike the existing ones, takes into account the peculiarities of the transport and storage process in the cold period of the year and allows determining the rational number of transport and auxiliary resources, taking into account the influence of external factors. Practical value. The obtained results make it possible to increase the efficiency of the TWLS operation of industrial enterprises due to the development of methods based on the logistic approach to the management of transport-warehouse processes. The simulation model of the management of the heating and unloading process allows you to determine the most economical mode of operation of transport and warehouse logistics systems of industrial enterprises by determining the rational number of involved resources.
- Open Access
- 14 February 2024
- Published by Vinnytsia National Technical University in Journal of Mechanical Engineering and Transport
- Vol. 18 (2) , 168-174
Formation of an integrated approach to research on the impact of transport and industrial processes on city-logistic systems
Taking into account the need for post-war reconstruction, one of the important issues is the formation of city-logistics systems taking into account the prospects for the development of urban industry, advanced achievements of science and technology, and the introduction of ecological modes of transport. , ensuring the European level of social and cultural development of the population. Meanwhile, enterprises of the metallurgical industry, as a rule, are city-forming in the settlements of industrial districts, they employ tens of thousands of workers. Taking into account the continuity of the main production processes in metallurgy, employees of such enterprises have a need for round-the-clock daily movement from their place of residence to the enterprise and back. At the same time, the schedules of the beginning and end of work shifts may be different at the same enterprise. Under such conditions, it is important to provide employees with timely and reliable transportation to the workplace. Accordingly, the city's transport system as a whole and the city's public transport in particular must be ready to ensure the growth of demand for passenger transportation for the sustainable development of the city's economy and social sphere. The article emphasizes the relevance of the tasks of optimizing the duration of signals both for relatively simple configurations of street network nodes and for complex street intersections with several sections of the road separated by a boulevard. The approach proposed by the authors to the management of the city-logistics system in the conditions of the cities of industrial regions will ensure the growth of demand for passenger transportation for the purpose of sustainable development of the economy and social sphere of cities. The need has been proven and practical solutions have been proposed for increasing the level of road safety, reducing traffic jams, and improving traffic modes within the cities of industrial areas, which allows to reduce the number of traffic accidents, ensures the fulfillment of urban logistics tasks, and also reduces the level of energy consumption of vehicles. expedient connection of various types of street transport, including individual ones, which will ensure rational planning of street space and increase the efficiency of the transport system of cities.
- 14 February 2024
- Published by Vinnytsia National Technical University in Journal of Mechanical Engineering and Transport
- Vol. 18 (2) , 168-174
Open AccessFormation of an integrated approach to research on the impact of transport and industrial processes on city-logistic systems
Taking into account the need for post-war reconstruction, one of the important issues is the formation of city-logistics systems taking into account the prospects for the development of urban industry, advanced achievements of science and technology, and the introduction of ecological modes of transport. , ensuring the European level of social and cultural development of the population. Meanwhile, enterprises of the metallurgical industry, as a rule, are city-forming in the settlements of industrial districts, they employ tens of thousands of workers. Taking into account the continuity of the main production processes in metallurgy, employees of such enterprises have a need for round-the-clock daily movement from their place of residence to the enterprise and back. At the same time, the schedules of the beginning and end of work shifts may be different at the same enterprise. Under such conditions, it is important to provide employees with timely and reliable transportation to the workplace. Accordingly, the city's transport system as a whole and the city's public transport in particular must be ready to ensure the growth of demand for passenger transportation for the sustainable development of the city's economy and social sphere. The article emphasizes the relevance of the tasks of optimizing the duration of signals both for relatively simple configurations of street network nodes and for complex street intersections with several sections of the road separated by a boulevard. The approach proposed by the authors to the management of the city-logistics system in the conditions of the cities of industrial regions will ensure the growth of demand for passenger transportation for the purpose of sustainable development of the economy and social sphere of cities. The need has been proven and practical solutions have been proposed for increasing the level of road safety, reducing traffic jams, and improving traffic modes within the cities of industrial areas, which allows to reduce the number of traffic accidents, ensures the fulfillment of urban logistics tasks, and also reduces the level of energy consumption of vehicles. expedient connection of various types of street transport, including individual ones, which will ensure rational planning of street space and increase the efficiency of the transport system of cities.
- Open Access
- 30 October 2023
- Published by Dnipro University of Technology in Naukovyi Visnyk Natsionalnoho Hirnychoho Universytetu
- No. 5,p. 102-107
Creation of conceptual solutions for the manufacture of component freight wagons from composites
Purpose. To present the results on the possibility of increasing the efficiency of the use of the operated fleet of freight wagons by creating conceptual solutions for the manufacture of their component load-bearing systems from composites. Methodology. To increase the efficiency of using the operating fleet of freight wagons measures are offered on the development of conceptual solutions for the manufacture of their components load-bearing systems made of composites. In order to determine the possibility of service life of the basic structures of the freight wagons, the methodology given in the works by A. V. Afanasyev was used. To study the dynamic loading of the freight wagon with the actual dimensions of the constituent elements, a calculation was made. At the same time, a mathematical model was used, formed by Professor G. I. Bogomaz, taking into account its adaptation to the determination of the dynamic loading. The vertical loading of the load-bearing structure of the freight wagon was also investigated. In this regard, a mathematical model formed by Professor Yu. V. Demin was used. The accelerations obtained in the simulation of dynamic loading were taken into account when calculating the strength of the basic structure of the freight wagon. Findings. It has been established that the design service life of the load-bearing structure of a freight wagon is at least 50 years. The results of determining the longitudinal loading of the basic structures of the freight wagon established that the acceleration acting on it is 37.7 m/s2, and with the vertical one – 5.5 m/s2. The strength calculation of the basic structure of a freight wagon showed that the maximum equivalent stresses are recorded in the zone of interaction of the center beam with the pivot and amount to 333.4 MPa, i.e. do not exceed the permissible values. Originality. The feasibility of manufacturing component load-carrying systems of freight wagons from composites is substantiated. Practical value. The research carried out will contribute to an increase in the efficiency of the use of railway transport, the transportation process through international transport corridors, as well as the creation of developments in the design of multifunctional car structures.
- 30 October 2023
- Published by Dnipro University of Technology in Naukovyi Visnyk Natsionalnoho Hirnychoho Universytetu
- No. 5,p. 102-107
Open AccessCreation of conceptual solutions for the manufacture of component freight wagons from composites
Purpose. To present the results on the possibility of increasing the efficiency of the use of the operated fleet of freight wagons by creating conceptual solutions for the manufacture of their component load-bearing systems from composites. Methodology. To increase the efficiency of using the operating fleet of freight wagons measures are offered on the development of conceptual solutions for the manufacture of their components load-bearing systems made of composites. In order to determine the possibility of service life of the basic structures of the freight wagons, the methodology given in the works by A. V. Afanasyev was used. To study the dynamic loading of the freight wagon with the actual dimensions of the constituent elements, a calculation was made. At the same time, a mathematical model was used, formed by Professor G. I. Bogomaz, taking into account its adaptation to the determination of the dynamic loading. The vertical loading of the load-bearing structure of the freight wagon was also investigated. In this regard, a mathematical model formed by Professor Yu. V. Demin was used. The accelerations obtained in the simulation of dynamic loading were taken into account when calculating the strength of the basic structure of the freight wagon. Findings. It has been established that the design service life of the load-bearing structure of a freight wagon is at least 50 years. The results of determining the longitudinal loading of the basic structures of the freight wagon established that the acceleration acting on it is 37.7 m/s2, and with the vertical one – 5.5 m/s2. The strength calculation of the basic structure of a freight wagon showed that the maximum equivalent stresses are recorded in the zone of interaction of the center beam with the pivot and amount to 333.4 MPa, i.e. do not exceed the permissible values. Originality. The feasibility of manufacturing component load-carrying systems of freight wagons from composites is substantiated. Practical value. The research carried out will contribute to an increase in the efficiency of the use of railway transport, the transportation process through international transport corridors, as well as the creation of developments in the design of multifunctional car structures.