Wei Chen
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Wei Chen has a total of 34 co-authors. Here are the top co-authors by number of shared publications:
- Nianfeng Wang
South China University of Technology
4 shared publications - Xianmin Zhang
South China University of Technology
3 shared publications - Bicheng Chen
School of Mechanical and Automotive Engineering, South China, University of Technology Guangdong Key Laboratory of Precision Equipment and Manufacturing Technology Guangzhou 510640 , China
2 shared publications - Adam Slowik
Koszalin University of Technology
1 shared publication - Benliang Zhu
South China University of Technology
1 shared publication - Bo Xu
Shanghai Key Laboratory of Intelligent Manufacturing and Robotics, Shanghai 200444, China
1 shared publication
Latest Publications
- Open Access
- 1 January 2025
- Published by Wiley in Applied Bionics and Biomechanics
- Vol. 2025 (1)
Dynamic Modeling and Simulation Analysis of an Arm Rehabilitation Robot With Mobile Platform
In response to the ever‐increasing demand of upper limb rehabilitation training and function improvement, a novel arm rehabilitation robot with mobile platform, which can move on the table, is designed to facilitate the upper limbs strength training via the passive force field. The proposed robot provides three passive degrees of freedom (plane motion on the table and rotation around the vertical axis), which can fulfill the robot‐aided trajectory training for upper limbs, such as shoulder, elbow, and wrist flexion/extension. Meanwhile, changed force field was established on the table via three elastic ropes. The user first connects the robot by the grab handle and arm support, then the screen displays the reference trajectory (RT) and notifies the user to manipulate the robot to draw the trajectory, the actual trajectory is calculated via the sensors and displayed to feed the user to adjust the muscular strength. In this paper, the reference trajectories, corresponding angular velocity of the wheels and the distribution of force field are analyzed via the dynamic modeling. Simulation studies are carried out to analyze the effectiveness of the theoretical model, kinematic performance, and distribution of force field. The path tracking simulation results showed that the peak error was 1.2 mm for the “∞” curve and 0.9 mm for the “O” curve. The force analysis results showed that the robot can generate the circinate force field and the maximum force of the whole workspace was 9.8 N with the elastic rigidity was 20 N/m. Furthermore, the maximum force was 11.02 N and the minimum force was 6.48 N when the robot moved along the of the circular path. These results demonstrate that the robot can generate appropriate force field to facilitate the motor training and paved the way to interventional therapy of the robot in the future. We will optimize the structure parameters and assemble a prototype to test the performance of the robot.
- 1 January 2025
- Published by Wiley in Applied Bionics and Biomechanics
- Vol. 2025 (1)
Open AccessDynamic Modeling and Simulation Analysis of an Arm Rehabilitation Robot With Mobile Platform
In response to the ever‐increasing demand of upper limb rehabilitation training and function improvement, a novel arm rehabilitation robot with mobile platform, which can move on the table, is designed to facilitate the upper limbs strength training via the passive force field. The proposed robot provides three passive degrees of freedom (plane motion on the table and rotation around the vertical axis), which can fulfill the robot‐aided trajectory training for upper limbs, such as shoulder, elbow, and wrist flexion/extension. Meanwhile, changed force field was established on the table via three elastic ropes. The user first connects the robot by the grab handle and arm support, then the screen displays the reference trajectory (RT) and notifies the user to manipulate the robot to draw the trajectory, the actual trajectory is calculated via the sensors and displayed to feed the user to adjust the muscular strength. In this paper, the reference trajectories, corresponding angular velocity of the wheels and the distribution of force field are analyzed via the dynamic modeling. Simulation studies are carried out to analyze the effectiveness of the theoretical model, kinematic performance, and distribution of force field. The path tracking simulation results showed that the peak error was 1.2 mm for the “∞” curve and 0.9 mm for the “O” curve. The force analysis results showed that the robot can generate the circinate force field and the maximum force of the whole workspace was 9.8 N with the elastic rigidity was 20 N/m. Furthermore, the maximum force was 11.02 N and the minimum force was 6.48 N when the robot moved along the of the circular path. These results demonstrate that the robot can generate appropriate force field to facilitate the motor training and paved the way to interventional therapy of the robot in the future. We will optimize the structure parameters and assemble a prototype to test the performance of the robot.
- Open Access
3D Printing/Vat Photopolymerization of Photopolymers Activated by Novel Organic Dyes as Photoinitiators
Even though numerous organic dyes which are used as photoinitiators/photocatalysts during photopolymerization have been systematically investigated and collected in previous reviews, further designs of these chromophores and the developments in high-performance photoinitiating systems have emerged in recent years, which play the crucial role in 3D printing/Vat polymerization. Here, in this mini-review, various families of organic dyes that are used as newly synthesized photoinitiators/photocatalysts which were reported in literature during 2021–2022 are specified by their photoinitiation mechanisms, which dominate their performance during photopolymerization, especially in 3D printing. Markedly, visible light-induced polymerization could be employed in circumstances not only upon the irradiation of artificial light sources, e.g., in LEDs, but also in sunlight irradiation. Furthermore, a short overview of the achievements of newly developed mechanisms, e.g., RAFT, photoinitiator-RAFT, and aqueous RAFT using organic chromophores as light-harvesting compounds to induce photopolymerization upon visible light irradiation are also thoroughly discussed. Finally, the reports on the semiconducting nanomaterials that have been used as photoinitiators/photocatalysts during photopolymerization are also introduced as perspectives that are able to expand the scope of 3D printing and materials science due to their various advantages such as high extinction coefficients, broad absorption spectra, and having multiple molecular binding points.
Open Access3D Printing/Vat Photopolymerization of Photopolymers Activated by Novel Organic Dyes as Photoinitiators
Even though numerous organic dyes which are used as photoinitiators/photocatalysts during photopolymerization have been systematically investigated and collected in previous reviews, further designs of these chromophores and the developments in high-performance photoinitiating systems have emerged in recent years, which play the crucial role in 3D printing/Vat polymerization. Here, in this mini-review, various families of organic dyes that are used as newly synthesized photoinitiators/photocatalysts which were reported in literature during 2021–2022 are specified by their photoinitiation mechanisms, which dominate their performance during photopolymerization, especially in 3D printing. Markedly, visible light-induced polymerization could be employed in circumstances not only upon the irradiation of artificial light sources, e.g., in LEDs, but also in sunlight irradiation. Furthermore, a short overview of the achievements of newly developed mechanisms, e.g., RAFT, photoinitiator-RAFT, and aqueous RAFT using organic chromophores as light-harvesting compounds to induce photopolymerization upon visible light irradiation are also thoroughly discussed. Finally, the reports on the semiconducting nanomaterials that have been used as photoinitiators/photocatalysts during photopolymerization are also introduced as perspectives that are able to expand the scope of 3D printing and materials science due to their various advantages such as high extinction coefficients, broad absorption spectra, and having multiple molecular binding points.
- 4 August 2022
- Published by Springer Nature
- p. 698-709
Force Tracking Impedance Control Based on Contour Following Algorithm
- 4 August 2022
- Published by Springer Nature
- p. 698-709
Force Tracking Impedance Control Based on Contour Following Algorithm
- 21 June 2022
- Published by ASME International in Journal of Mechanisms and Robotics
- Vol. 15 (2)
Automatic Design of Dielectric Elastomer-Based Crawling Robots Using Shape and Topology Optimization
Dielectric elastomer-based crawling robots can utilize a voltage-induced deformation to achieve prescribed crawling movements. Although a rich repertoire of robots have been proposed with various design schemes, developing the logic and a unified methodology is hard. This work designs inchworm-inspired crawling robots based on computational optimization. An improved shape and topology optimization method is developed using a fat B-spline curve to generate a stable frame for the dielectric elastomer actuators (DEAs). An optimization framework is proposed, and the updating algorithm is assessed with a sensitivity analysis. The leg-DEA and abdomen-DEA of the crawling robot are modeled and designed automatically with iterations implemented in finite element simulation. An optimization soft crawling robot was fabricated and tested, which can move smoothly along the ground.
- 21 June 2022
- Published by ASME International in Journal of Mechanisms and Robotics
- Vol. 15 (2)
Automatic Design of Dielectric Elastomer-Based Crawling Robots Using Shape and Topology Optimization
Dielectric elastomer-based crawling robots can utilize a voltage-induced deformation to achieve prescribed crawling movements. Although a rich repertoire of robots have been proposed with various design schemes, developing the logic and a unified methodology is hard. This work designs inchworm-inspired crawling robots based on computational optimization. An improved shape and topology optimization method is developed using a fat B-spline curve to generate a stable frame for the dielectric elastomer actuators (DEAs). An optimization framework is proposed, and the updating algorithm is assessed with a sensitivity analysis. The leg-DEA and abdomen-DEA of the crawling robot are modeled and designed automatically with iterations implemented in finite element simulation. An optimization soft crawling robot was fabricated and tested, which can move smoothly along the ground.
- 11 December 2021
- Published by Springer Nature in Journal of Intelligent & Robotic Systems
- Vol. 104 (1) , 1-12
A Path Correction Method Based on Global and Local Matching for Robotic Autonomous Systems
- 11 December 2021
- Published by Springer Nature in Journal of Intelligent & Robotic Systems
- Vol. 104 (1) , 1-12
A Path Correction Method Based on Global and Local Matching for Robotic Autonomous Systems
- 5 March 2021
- Published by ASME International in Journal of Mechanisms and Robotics
- Vol. 13 (2)
Design, Kinematics, and Application of Axially and Radially Expandable Modular Soft Pneumatic Actuators
Recently, soft pneumatic actuators (SPAs) have drawn increasing attention due to their ease of fabrication, high customizability, and intrinsic softness. Inspired by modular design, two kinds of SPAs, including an axial elongation soft pneumatic actuator (aeSPA) and a radial expansion soft pneumatic actuator (reSPA), are proposed in this paper, followed by their modeling, fabrication, and application in locomotion robots. The relationships between pressure and displacement of these SPAs are deduced based on the Yeoh model and the principle of virtual work, which has a good agreement with experimental results. Five modular worm-like crawling robots are fabricated by assembling the aeSPAs and reSPAs in different morphologies, and crawling tests are performed under different conditions to show the adaptivity of robots.
- 5 March 2021
- Published by ASME International in Journal of Mechanisms and Robotics
- Vol. 13 (2)
Design, Kinematics, and Application of Axially and Radially Expandable Modular Soft Pneumatic Actuators
Recently, soft pneumatic actuators (SPAs) have drawn increasing attention due to their ease of fabrication, high customizability, and intrinsic softness. Inspired by modular design, two kinds of SPAs, including an axial elongation soft pneumatic actuator (aeSPA) and a radial expansion soft pneumatic actuator (reSPA), are proposed in this paper, followed by their modeling, fabrication, and application in locomotion robots. The relationships between pressure and displacement of these SPAs are deduced based on the Yeoh model and the principle of virtual work, which has a good agreement with experimental results. Five modular worm-like crawling robots are fabricated by assembling the aeSPAs and reSPAs in different morphologies, and crawling tests are performed under different conditions to show the adaptivity of robots.
- Open Access
- 21 March 2020
- Published by MDPI AG in Applied Sciences
- Vol. 10 (6) , 2151
Robust Visual Tracking Based on Fusional Multi-Correlation-Filters with a High-Confidence Judgement Mechanism
Visual object trackers based on correlation filters have recently demonstrated substantial robustness to challenging conditions with variations in illumination and motion blur. Nonetheless, the models depend strongly on the spatial layout and are highly sensitive to deformation, scale, and occlusion. As presented and discussed in this paper, the colour attributes are combined due to their complementary characteristics to handle variations in shape well. In addition, a novel approach for robust scale estimation is proposed for mitigatinge the problems caused by fast motion and scale variations. Moreover, feedback from high-confidence tracking results was also utilized to prevent model corruption. The evaluation results for our tracker demonstrate that it performed outstandingly in terms of both precision and accuracy with enhancements of approximately 25% and 49%, respectively, in authoritative benchmarks compared to those for other popular correlation- filter-based trackers. Finally, the proposed tracker has demonstrated strong robustness, which has enabled online object tracking under various scenarios at a real-time frame rate of approximately 65 frames per second (FPS).
- 21 March 2020
- Published by MDPI AG in Applied Sciences
- Vol. 10 (6) , 2151
Open AccessRobust Visual Tracking Based on Fusional Multi-Correlation-Filters with a High-Confidence Judgement Mechanism
Visual object trackers based on correlation filters have recently demonstrated substantial robustness to challenging conditions with variations in illumination and motion blur. Nonetheless, the models depend strongly on the spatial layout and are highly sensitive to deformation, scale, and occlusion. As presented and discussed in this paper, the colour attributes are combined due to their complementary characteristics to handle variations in shape well. In addition, a novel approach for robust scale estimation is proposed for mitigatinge the problems caused by fast motion and scale variations. Moreover, feedback from high-confidence tracking results was also utilized to prevent model corruption. The evaluation results for our tracker demonstrate that it performed outstandingly in terms of both precision and accuracy with enhancements of approximately 25% and 49%, respectively, in authoritative benchmarks compared to those for other popular correlation- filter-based trackers. Finally, the proposed tracker has demonstrated strong robustness, which has enabled online object tracking under various scenarios at a real-time frame rate of approximately 65 frames per second (FPS).
- Open Access
- 12 February 2020
- Published by Wiley in Journal of Healthcare Engineering
- Vol. 2020, 1-7
Dynamic Modeling and Simulation of a Body Weight Support System
This paper proposes a body weight support (BWS) system with a series elastic actuator (SEA) to facilitate walking assistance and motor relearning during gait rehabilitation. This system comprises the following: a mobile platform that ensures movement of the system on the ground, a BWS mechanism with an SEA that is capable of providing the desired unloading force, and a pelvic brace to smooth the pelvis motions. The control of the body weight support is realized by an active weight-offload method, and a dynamic model of the BWS system with offload mass of a human is conducted to simulate the control process and optimize the parameters. Preliminary results demonstrate that the BWS system can provide the desired support force and vertical motion of the pelvis.
- 12 February 2020
- Published by Wiley in Journal of Healthcare Engineering
- Vol. 2020, 1-7
Open AccessDynamic Modeling and Simulation of a Body Weight Support System
This paper proposes a body weight support (BWS) system with a series elastic actuator (SEA) to facilitate walking assistance and motor relearning during gait rehabilitation. This system comprises the following: a mobile platform that ensures movement of the system on the ground, a BWS mechanism with an SEA that is capable of providing the desired unloading force, and a pelvic brace to smooth the pelvis motions. The control of the body weight support is realized by an active weight-offload method, and a dynamic model of the BWS system with offload mass of a human is conducted to simulate the control process and optimize the parameters. Preliminary results demonstrate that the BWS system can provide the desired support force and vertical motion of the pelvis.